Related
i wanted to ask if i extract a rom can i use it threw odin to flash a rom
or does anyone have a list of odin flashable roms send it to me please
It would not be easy for someone who doesnt really know what they are doing to convert a flashable .zip into a pit/tar...
Well which type of rom are you looking for specifically? And why flashable through Odin?
Sent from my SGH-T959 (Samsung Vibrant)
Simply stock jvt 2.3.5 can you do it?
Sent from my GT-I9000 using XDA App
Sorry, but I wouldn't know how to go by doing it either. However, you may be able to get the developer to do it... Still I must ask, why through Odin?
Sent from my SGH-T959 (Samsung Vibrant)
Cus my phones dumb it always bootloops everytime I try to flash I do everything they say
Sent from my GT-I9000 using XDA App
whitehawx has a 2.2 odin flashable deodexed kb5 rom I use it as a stepping stone, not sure what your looking for, check dev. sec it wont loop, hawk writes good script
Why not?
I actually came to the Q&A section with a question along these same lines...is there a reason, other than developer preference, for NOT creating more ODIN flashable ROMs? I don't screw up flashing through recovery like the OP but I can say that I have never had to deal with one-off bugs, leftovers from previous ROMs that didn't get wiped (I'm lately a subscriber to the 'wipe three times' even after the paper is clean method), or ROM "settling," etc. I have a little more confidence in the process, I'm seldom so in need of a ROM flash that I am not near a computer...anyway, enough about me.
I am willing, if any developers want to take the time to teach me what is required to accomplish it, to start a project to convert as many of the flashable .zip ROMs as possible into tar files that can be flashed via ODIN.
There. Volunteered meself.
bord1er said:
i wanted to ask if i extract a rom can i use it threw odin to flash a rom
or does anyone have a list of odin flashable roms send it to me please
Click to expand...
Click to collapse
Good luck my friend tried doing this once and ended up bricking his device.
I warned him that it was for experienced people but he didn't listen to me haha
probably the definition of a newb
It's atually pretty easy to do if someone wants to take the time.
Here's the way to do it.
http://forum.xda-developers.com/showthread.php?t=960946&highlight=create+Odin+tar
Once I have my phone configured the way I like it I usually make one as a backup.
edit: the listed partition are for Samsung based roms not CM7or Miui.
heysoos said:
I actually came to the Q&A section with a question along these same lines...is there a reason, other than developer preference, for NOT creating more ODIN flashable ROMs? I don't screw up flashing through recovery like the OP but I can say that I have never had to deal with one-off bugs, leftovers from previous ROMs that didn't get wiped (I'm lately a subscriber to the 'wipe three times' even after the paper is clean method), or ROM "settling," etc. I have a little more confidence in the process, I'm seldom so in need of a ROM flash that I am not near a computer...anyway, enough about me.
I am willing, if any developers want to take the time to teach me what is required to accomplish it, to start a project to convert as many of the flashable .zip ROMs as possible into tar files that can be flashed via ODIN.
There. Volunteered meself.
Click to expand...
Click to collapse
I usually wipe 2 or 3 times as well.. just because I do it at work. I'm an electronics tech, and anytime we clear flash chips we do it 3 times to make sure the old stuff is gone. Stuff does stay in there!! Not sure if it applies to the chips in our devices, but it doesn't hurt to make sure you are clean.. that way you know you won't get skidmarks.
I also wish there were more odin roms.. I guess it is just too much extra trouble when these roms get updated so often.
Okay. Couple days ago, i got my new Samsung Galaxy S II. Fell in love with it. I previously had a Vibrant, but that met an unfortunate and violent demise. On the vibrant I hadn't been doing anything involving roms and such because i'd tried once, and completely fried the phone. LOL.
I managed to root my phone, and from what I've read, I didn't do the best method. What I did was get an unsecure kernel, and flashed that, then used a 1-click root type thing to root it. So one of my questions is, my clockwork mod isn't working, what's wrong with it? I downloaded ROM Manager, and flashed CWM. But when i reboot into recovery, i get the stock Samsung recovery screen. How can I get this to work?
And another question, is about roms such as Cyanogen mod. I really wanna get it. (I wont until I get CWM working, though.) And I'm just wondering. If I were to just go to ROM Manager, and flash cyanogen, would it work, or do i need to do more to my phone to be able to put on custom roms? I've never understood the concept of roms vs kernels vs firmware vs whatever else.
And if it matters, Samsung Galaxy S II, Android 2.3.3, rooted using SuperOneClick.
P.S Anything else that I should considering doing/putting onto my phone? And thanks in advance for halping.
Gutana said:
Okay. Couple days ago, i got my new Samsung Galaxy S II. Fell in love with it. I previously had a Vibrant, but that met an unfortunate and violent demise. On the vibrant I hadn't been doing anything involving roms and such because i'd tried once, and completely fried the phone. LOL.
I managed to root my phone, and from what I've read, I didn't do the best method. What I did was get an unsecure kernel, and flashed that, then used a 1-click root type thing to root it. So one of my questions is, my clockwork mod isn't working, what's wrong with it? I downloaded ROM Manager, and flashed CWM. But when i reboot into recovery, i get the stock Samsung recovery screen. How can I get this to work?
And another question, is about roms such as Cyanogen mod. I really wanna get it. (I wont until I get CWM working, though.) And I'm just wondering. If I were to just go to ROM Manager, and flash cyanogen, would it work, or do i need to do more to my phone to be able to put on custom roms? I've never understood the concept of roms vs kernels vs firmware vs whatever else.
And if it matters, Samsung Galaxy S II, Android 2.3.3, rooted using SuperOneClick.
P.S Anything else that I should considering doing/putting onto my phone? And thanks in advance for halping.
Click to expand...
Click to collapse
Okay, don't take this the wrong way, but it seems you're a bit lacking regarding knowledge about this phone... It'd pay to do your research beforehand in the SGS2 forum, read the FAQs, etc.
Okay, first off, all I can say is, go back to stock. Go flash a stock Samsung ROM for the device. Then, go into Chainfire's CF-Root Kernel thread, and download the appropriate kernel, and flash it using ODIN. After you've done that, you'll have ClockworkMod, and you'll be rooted. It is recommended that you flash another kernel though, after gaining root, as all the CF-Root kernel does it install ClockworkMod, and root the device. Personally, I recommend SiyahKernel.
If you need more detail or have any more questions, feel free to send me a PM.
Thanks,
screamworks.
screamworks said:
Okay, don't take this the wrong way, but it seems you're a bit lacking regarding knowledge about this phone... It'd pay to do your research beforehand in the SGS2 forum, read the FAQs, etc.
Okay, first off, all I can say is, go back to stock. Go flash a stock Samsung ROM for the device. Then, go into Chainfire's CF-Root Kernel thread, and download the appropriate kernel, and flash it using ODIN. After you've done that, you'll have ClockworkMod, and you'll be rooted. It is recommended that you flash another kernel though, after gaining root, as all the CF-Root kernel does it install ClockworkMod, and root the device. Personally, I recommend SiyahKernel.
If you need more detail or have any more questions, feel free to send me a PM.
Thanks,
screamworks.
Click to expand...
Click to collapse
Alright, I did what you said. I went to stock 2.3.4, used CF-root. And now about SiyahKernel, what are the advantages of it? And is there something wrong with just staying with the CF-Root kernel?
And as of where I am now, with just root and CWM, would i be able to switch ROMs and such?
Gutana said:
Alright, I did what you said. I went to stock 2.3.4, used CF-root. And now about SiyahKernel, what are the advantages of it? And is there something wrong with just staying with the CF-Root kernel?
And as of where I am now, with just root and CWM, would i be able to switch ROMs and such?
Click to expand...
Click to collapse
With a rooted device you'll be able to flash trough Odin or CMW recovery any rom you like.
Siyah kernel gives you a faster and more battery efficient phone and lets you set your own Voltage/ speed the processor has to use see this for the latest info
http://www.gokhanmoral.com/ and
http://forum.xda-developers.com/showthread.php?t=1263838
DirkTeur Velserbroncx said:
With a rooted device you'll be able to flash trough Odin or CMW recovery any rom you like.
Siyah kernel gives you a faster and more battery efficient phone and lets you set your own Voltage/ speed the processor has to use see this for the latest info
http://www.gokhanmoral.com/ and
http://forum.xda-developers.com/showthread.php?t=1263838
Click to expand...
Click to collapse
Alright, so i'm pretty much ready to go? Yayayayay.
And would you recommend any roms for me? XD
Gutana said:
Alright, I did what you said. I went to stock 2.3.4, used CF-root. And now about SiyahKernel, what are the advantages of it? And is there something wrong with just staying with the CF-Root kernel?
And as of where I am now, with just root and CWM, would i be able to switch ROMs and such?
Click to expand...
Click to collapse
SiyahKernel has a lot of advantages and improvements of CF-Root, which provides null, if I'm correct. Go check out the SiyahKernel thread in Original Development for details.
Yes, as stated, you can use CWM by itself to switch ROMs. Just remember that if you're switching ROMs (as opposed to performing a flash to a newer version of the same ROM), to perform a factor reset / wipe data, wipe cache, and wipe Dalvik cache (Advanced > wipe Dalvik cache) in ClockworkMod first.
Gutana said:
Alright, so i'm pretty much ready to go? Yayayayay.
And would you recommend any roms for me? XD
Click to expand...
Click to collapse
For a beginninger, I can't recommend MIUI highly enough. You could go with GalnetMIUI, which is a variant, but I personally prefer the official MIUI build. If you're looking for a more, 'pure' experience, go with CyanogenMod 7.1 stable.
screamworks said:
SiyahKernel has a lot of advantages and improvements of CF-Root, which provides null, if I'm correct. Go check out the SiyahKernel thread in Original Development for details.
Yes, as stated, you can use CWM by itself to switch ROMs. Just remember that if you're switching ROMs (as opposed to performing a flash to a newer version of the same ROM), to perform a factor reset / wipe data, wipe cache, and wipe Dalvik cache (Advanced > wipe Dalvik cache) in ClockworkMod first.
For a beginninger, I can't recommend MIUI highly enough. You could go with GalnetMIUI, which is a variant, but I personally prefer the official MIUI build. If you're looking for a more, 'pure' experience, go with CyanogenMod 7.1 stable.
Click to expand...
Click to collapse
Alright, one more question, sorry for the nooby-ness. Haha.
So going from my phone to for example Cyanogen, I'd backup in CWM, and Titanium backup (Or does CWM backup like, EVERYTHING?) and then factory reset, flash the rom using odin, and then use titanium backup to get my apps and settings back? orwhat.
Gutana said:
Alright, one more question, sorry for the nooby-ness. Haha.
So going from my phone to for example Cyanogen, I'd backup in CWM, and Titanium backup (Or does CWM backup like, EVERYTHING?) and then factory reset, flash the rom using odin, and then use titanium backup to get my apps and settings back? orwhat.
Click to expand...
Click to collapse
CWM backup (called a NANDroid backup), backs up everything. If you perform a NANDroid back, there's no need to perform a backup in Titanium Backup - it creates a full image of your system (the advantage to TB though, is that you can backup all your download apps and settings, then install the new ROM, and restore the backed up apps - If you restore a NANDdroid backup, it'll restore the old ROM, exactly as it was when the backup was made).
So yes, the installation process is, for CWM: copy the ROM.zip to your phone, then boot into CWM recovery. Hit the 'factory reset / wipe data' option, the 'wipe cache' option, and then go to Advanced, and hit the 'wipe Dalvik cache' option. After that, choose 'install ZIP from SDCARD', and choose your ROM.zip. After it finishes installing, just hit 'reboot system now', and you're good to go!
Usually, it's not required to use ODIN to flash a new ROM, unless there's a problem with the recovery.
All that said, it pays to read the thread for the ROM beforehand, as sometimes when moving from ROM to ROM (especially from stock), there's a few small things that may be required, like flashing the ROM twice, or whatever
screamworks said:
CWM backup (called a NANDroid backup), backs up everything. If you perform a NANDroid back, there's no need to perform a backup in Titanium Backup - it creates a full image of your system (the advantage to TB though, is that you can backup all your download apps and settings, then install the new ROM, and restore the backed up apps - If you restore a NANDdroid backup, it'll restore the old ROM, exactly as it was when the backup was made).
So yes, the installation process is, for CWM: copy the ROM.zip to your phone, then boot into CWM recovery. Hit the 'factory reset / wipe data' option, the 'wipe cache' option, and then go to Advanced, and hit the 'wipe Dalvik cache' option. After that, choose 'install ZIP from SDCARD', and choose your ROM.zip. After it finishes installing, just hit 'reboot system now', and you're good to go!
Usually, it's not required to use ODIN to flash a new ROM, unless there's a problem with the recovery.
All that said, it pays to read the thread for the ROM beforehand, as sometimes when moving from ROM to ROM (especially from stock), there's a few small things that may be required, like flashing the ROM twice, or whatever
Click to expand...
Click to collapse
Alright, i got that done. I've tried both MIUI and Cyanogen, and both are working and lookin wonderful. But the problem is I dont get data on either one. I've tried reflashing, rebooting, factory reset. Idunno what else to try. Do you know what could be causing this?
Gutana said:
Alright, i got that done. I've tried both MIUI and Cyanogen, and both are working and lookin wonderful. But the problem is I dont get data on either one. I've tried reflashing, rebooting, factory reset. Idunno what else to try. Do you know what could be causing this?
Click to expand...
Click to collapse
Check your APN settings (should be somewhere in Settings under mobile network or whatever). Look your's up online ('APN settings carrier y, country z), and if they're not correct, add them in.
screamworks said:
Check your APN settings (should be somewhere in Settings under mobile network or whatever). Look your's up online ('APN settings carrier y, country z), and if they're not correct, add them in.
Click to expand...
Click to collapse
Got everything working, thank you very much. Thanked every one of your posts
And I've asked too many questions for one person in one thread, I happen to have one more. How can I get the Android Market on Cyanogenmod? I downloaded build 115, and there wasn't a market, so i'll be using MIUI till I get that fixed. ><
Gutana said:
Got everything working, thank you very much. Thanked every one of your posts
And I've asked too many questions for one person in one thread, I happen to have one more. How can I get the Android Market on Cyanogenmod? I downloaded build 115, and there wasn't a market, so i'll be using MIUI till I get that fixed. ><
Click to expand...
Click to collapse
You're more than welcome
If you've got any other questions, feel free to PM me
With CyanogenMod, there's a bit of a story to it, but basically, they're not allowed to package Market, Gmail, Maps, etc. with the ROM, so you need to download a zip file called Gapps and flash it in CWM Recovery, you can find it here. You don't need to wipe anything when flashing this.
Also, build #115 isn't the latest, build #117 is (in fact, there's another, even more current one, but there's really nothing to it), but I don't believe there's any major changes.
screamworks said:
You're more than welcome
If you've got any other questions, feel free to PM me
With CyanogenMod, there's a bit of a story to it, but basically, they're not allowed to package Market, Gmail, Maps, etc. with the ROM, so you need to download a zip file called Gapps and flash it in CWM Recovery, you can find it here. You don't need to wipe anything when flashing this.
Also, build #115 isn't the latest, build #117 is (in fact, there's another, even more current one, but there's really nothing to it), but I don't believe there's any major changes.
Click to expand...
Click to collapse
Hey, I was having troubles messaging you, since it didn't show anything in the sent box, i assumed it didnt go through. So i guess ill be still asking you on here.
So about Cyanogen, which build is the best? And if i'm going from one build to another, like from 115, to 116, would i still have to do a complete wipe? And any other roms besides MIUI and Cyanogen you recommend? cause MIUI is giving me and couldn't generate md5 errors, and i cant restore to it, and i hate starting off without it set up how i like it. D: and yeah, thanks.
Gutana said:
Hey, I was having troubles messaging you, since it didn't show anything in the sent box, i assumed it didnt go through. So i guess ill be still asking you on here.
So about Cyanogen, which build is the best? And if i'm going from one build to another, like from 115, to 116, would i still have to do a complete wipe? And any other roms besides MIUI and Cyanogen you recommend? cause MIUI is giving me and couldn't generate md5 errors, and i cant restore to it, and i hate starting off without it set up how i like it. D: and yeah, thanks.
Click to expand...
Click to collapse
I only just the message 12 hours ago, if that helps?
Usually, your best bet is to go with the latest build, which you can get here. If it's stability you're looking for, go with the stable build, instead of nightlies.
Personally, out of all ROMs I've tried, I could only ever stand MIUI and CyanogenMod - but even then, MIUI started to annoy me with little things here and there. I think I'll be sticking with CyanogenMod for awhile. So, I'm not really the best authority on that. Just try some different ones, and see what appeals to you the most
I'm relatively new to the rooting community, but I think I'm doing pretty good. I have my DX2 running Eclipse 2.0.1 and am about to install Speedy v7. I am supposed to flash the .zip using BSR, which is no problem. My question is, what all does flashing involve? Should I automatically know to wipe cache when flashing? Just curious
Another questions while I'm here. I'm running Eclipse 2.0.1, let's say I wanted to try out another rom (such as Liberty), do I just flash (like above) the new rom? Or do I have to do something special for flashing roms as opposed to mod scripts (such as speedy v7)? And if I nandroid Eclipse before flashing a new rom, can I easily restore my nandroid?
Big big big thanks!
"Flashing" is just a term that means to overwrite something to make changes. Thats as much as I can tell you about that. lol
If you are wanting to flash other ROMs over your eclipse rom, you need to be on the same kernel. Since you are using Eclipse 2.0.1, I think its safe to say you are running Android 2.3.5. If you have another ROM that is built off of Android 2.3.5 then you should be safe to wipe cache, dalvik cache and flash right over it. Some might require you to do a factory reset but its not always necessary. But if you want to use a ROM based off of 2.3.4, like I think Liberty is (I'm not sure if its been updated), then you have to first be on stock 2.3.4. Which means going through the process of downgrading your OS first.
And about wiping cache and all, I would say just do it before flashing anything. It doesnt hurt and doesnt take long. Before you use any scripts though, make sure it has been updated for 2.3.5 ROMs. Otherwise you will get a bootloop and be stuck.
I hope that sheds some light on your question and didnt confuse you more. lol
No that definitely clears some things up for me, thanks
As far as downgrading the OS. Does that require the RSD/SBF process? If so, I'm familiar with that.
wesf90 said:
No that definitely clears some things up for me, thanks
As far as downgrading the OS. Does that require the RSD/SBF process? If so, I'm familiar with that.
Click to expand...
Click to collapse
Yes. Thats all you need. Just use the right SBF file. Ive been told you can SBF to a lower Android OS but I havent done it yet.
jsgraphicart said:
Yes. Thats all you need. Just use the right SBF file. Ive been told you can SBF to a lower Android OS but I havent done it yet.
Click to expand...
Click to collapse
You can SBF to the original 2.2 froyo the X2 had and either stay there or ride the two OTA updates back to 2.3.4
Thanks to both of you. I feel pretty confident now. Hopefully this topic will help someone else along the way with the same questions
wesf90 said:
Thanks to both of you. I feel pretty confident now. Hopefully this topic will help someone else along the way with the same questions
Click to expand...
Click to collapse
No problem. Hey since its solved put (Solved) in the OP subject line in front of the orginial subject so people will know
Good call. Done
jsgraphicart said:
"Flashing" is just a term that means to overwrite something to make changes. Thats as much as I can tell you about that. lol
If you are wanting to flash other ROMs over your eclipse rom, you need to be on the same kernel. Since you are using Eclipse 2.0.1, I think its safe to say you are running Android 2.3.5. If you have another ROM that is built off of Android 2.3.5 then you should be safe to wipe cache, dalvik cache and flash right over it. Some might require you to do a factory reset but its not always necessary. But if you want to use a ROM based off of 2.3.4, like I think Liberty is (I'm not sure if its been updated), then you have to first be on stock 2.3.4. Which means going through the process of downgrading your OS first.
And about wiping cache and all, I would say just do it before flashing anything. It doesnt hurt and doesnt take long. Before you use any scripts though, make sure it has been updated for 2.3.5 ROMs. Otherwise you will get a bootloop and be stuck.
I
I hope that sheds some light on your question and didnt confuse you more. lol
Click to expand...
Click to collapse
In reference to your comment about bootloop.
If u make a nandroid before flashing something (and u don't wipe data before rebooting) and you get stuck in boutloop,
Just pull battery and plug in.
BSR will come up an you can restore your nandroid and will be up and running again no problem.
Hey all,
I just received my i777 and I'm impressed. Coming from a sgs4g seems like a huge improvement, though the devices look physically the same LOL (with the i777 being a bit on the larger side).
Anyways, I've been flashing roms for about a year now with my sgs4g. The forums for the sgs4g had very detailed instructions when flashing, instructions like, what to do if coming from stock, but on this forum ppl just assume you have CWM installed.
What I want is a safe way to upgrade to, let's say, phone bricker. I've noticed that all roms are installed through CWM, and all OP say is "make sure CWM is installed", but there's no mention whatsoever on how to install CWM on this phone.
Maybe i'm complicating things a little bit. On my previous phone, Rom Manager downloaded from market was a NO NO because it'd brick it. So we had to flash a modded CWM via odin made specifically for our phones. Maybe for this phone installing rom manager is all that is needed? yes? OK, found the FAQ. no ROM manager.
Also, somehow this phone came rooted... I bought it new from a store but the unlocked version since I live outside USA.
So, if I'm not mistaken, I should just install rom manager, select my phone from the list, flash CWM recovery and flash away roms on the dev section. Am I correct? I don't want to brick my phone
I would not use Rom manger it's proven to be more of a headache for this device. Look on the dev section there are a couple of packages that you can use to get cwm. If your already rooted you could simply flash a custom kernel like entropys daily driver which already has cwm included in kernel.
Again, if your rooted, easiest way could be to simply use mobile Odin to flash custom kernel(I'm assuming your running gingerbread).
I bought the full version of mobile ODIN. makes life a little simpler when flashing, in my opinion. It's worth the few bucks.
eep2378 said:
I would not use Rom manger it's proven to be more of a headache for this device. Look on the dev section there are a couple of packages that you can use to get cwm. If your already rooted you could simply flash a custom kernel like entropys daily driver which already has cwm included in kernel.
Again, if your rooted, easiest way could be to simply use mobile Odin to flash custom kernel(I'm assuming your running gingerbread).
Click to expand...
Click to collapse
Running GB, yes. It's (i think) completely stock: GB KJ4.
I've checked and I have standard recovery, so I'm looking for the best and safest way to get cmw.
Mobile odin looks like a good option, but would I need the full paid version?
mikeflash said:
Running GB, yes. It's (i think) completely stock: GB KJ4.
I've checked and I have standard recovery, so I'm looking for the best and safest way to get cmw.
Mobile odin looks like a good option, but would I need the full paid version?
Click to expand...
Click to collapse
You don't need pro version, lite version will do just fine. Are you sure you're rooted? You have superuser app? Whether you're rooted or not look here(if you are rooted look at #3 : http://forum.xda-developers.com/showthread.php?t=1311081
Check out this thread, was my experience and I'm running PhoneBricker just fine!
However, backup your apps before flashing and factory reset, wipe cache and dalvik after (possibly before as well) and you should be fine! Will root then you can flash away.
Clay
Sent from my SGH-I777 using XDA
One other point for you. Your phone was flashed, in most probability by the folks who sold it to you, with a leaked version of Gingerbread, UCKJ4. As a result, your flash count is probably at 1, and the secondary bootloader was probably replaced with one that disables the ability to clear the flash counter with a usb jig. If this matters to you, you can test first with a jig to see if it will reset, and if not, you can flash the original UCKH7 secondary bootloader to fix it. Needed files can be found in the Download Repository.
Oh, and my guide explains how to flash a modified kernel containing ClockworkMod Recovery if you need it.
Well, I flashed my phone last night. Used mobile odin for flashing a kernel (siyah) to get CWM, then flashed phone bricker via CWM like I used to do on my old phone. Everything went smooth.
Though I'm not fond on this "4.0.3", it's just a launcher that looks like ICS but I don't want to believe it's a true ICS ROM, because it feels weird, I certainly prefer stock GB (or a custom GB rom) instead of some heavily modded rom with ICS theme.
creepyncrawly said:
One other point for you. Your phone was flashed, in most probability by the folks who sold it to you, with a leaked version of Gingerbread, UCKJ4. As a result, your flash count is probably at 1, and the secondary bootloader was probably replaced with one that disables the ability to clear the flash counter with a usb jig. If this matters to you, you can test first with a jig to see if it will reset, and if not, you can flash the original UCKH7 secondary bootloader to fix it. Needed files can be found in the Download Repository.
Oh, and my guide explains how to flash a modified kernel containing ClockworkMod Recovery if you need it.
Click to expand...
Click to collapse
There're several new terms I need to learn about this phone that weren't used on sgs4g. Such as DPI (i.e lowering it, what for? isn't that a step back?) and flash counter.
I suppose flash count is just a counter for how many times you have flashed the phone with custom Roms, so that warranty people can check if a returned phone was damaged due to bad flash, or something like that. Am I correct?
If that's the case, then I'm not too worried about flash count because I live outside US, and my AT&T phone wouldn't get warranty over here, but I'll definitely look into that, to check where my counter is at and to check if resetting it back to 0 is still possible.
I'll be checking up on the links you provided.
Thanks a lot.
mikeflash said:
Though I'm not fond on this "4.0.3", it's just a launcher that looks like ICS but I don't want to believe it's a true ICS ROM, because it feels weird, I certainly prefer stock GB (or a custom GB rom) instead of some heavily modded rom with ICS theme.
Click to expand...
Click to collapse
It is a true ICS rom. Samsung didn't do a lot of cosmetic changes when they moved the S2 to ICS though...most changes are under the hood.
If you want something that looks and feels more like true ICS, you should consider trying either CM9 or AOKP. They are both based on Google's source code, nothing Touchwiz about them.
Or if you'd rather stick with what you have, you can always try different launchers. I'm running ICS, but I use Go Launcher and it runs beautifully.
mikeflash said:
There're several new terms I need to learn about this phone that weren't used on sgs4g. Such as DPI (i.e lowering it, what for? isn't that a step back?) and flash counter.
I suppose flash count is just a counter for how many times you have flashed the phone with custom Roms, so that warranty people can check if a returned phone was damaged due to bad flash, or something like that. Am I correct?
Click to expand...
Click to collapse
That is mostly correct. You're right about the purpose of the flash counter, but it actually counts how many times you flash kernels, not roms. And even then, it only increments if you flash a kernel via Odin in download mode. Flashing a kernel in Mobile Odin or CWM doesn't touch the counter.
Incrementing the flash counter also places that possibly annoying yellow triangle on bootup on your phone. Since you're on ICS, you can just use triangle away app from play store (free version is on here somewhere) to get rid of it, though I'm not sure if that'll fix the whole secondary bootloaders thing (probably not). I think it'd be worth it to fix that just so you don't run into anymore problems later if you decide to change something, especially since after the fixes you can just nandroid back to your current setup, but it's not essential and completely up to you.
Sent from my Samsung SGH-I777 using XDA
I'm confused why this thread was started. There ARE detailed instructions in the stickies and by using Google search along with the words XDA after the search u would easily find any and all information needed. Why do we need a thread dedicated to helping one person read stickies which already have this information.
Sent from my SGH-I777 using Tapatalk 2
Phalanx, did you not read the Title?
It says be nice!
crawls back into hole
Sent from my SGH-I777 using XDA
Phalanx7621 said:
I'm confused why this thread was started. There ARE detailed instructions in the stickies and by using Google search along with the words XDA after the search u would easily find any and all information needed. Why do we need a thread dedicated to helping one person read stickies which already have this information.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Thank you friend.
To sum up for OP
1. Strongly suggest NOT to use ROM Manager on any custom ROMs unless you are surely running CyanogenMod ROM.
2. Check the "About phone" to see if it is true ICS or ICS-theme GB.
Hi all,
I have a friend with an AT&T Atrix 4G. I've had a Droid X and current have a Galaxy Nexus & Nexus 7. I did everything you could do to the X and know my way around the Nexus very well; the atrix is a little confusing to me. moto-fastboot and the idea that SBFing is bad are new concepts to me. On the Droid X, if you were in trouble, you just SBF'd.
My friend had some trouble with his Atrix the other day, he was stuck at the splash screen, we got it half way fixed and he was in a bootloop, and eventually we got a version of CM9 on there: 9.0.0-rco-atrix-kang. The phone is running now but the ROM is unstable. I'd like to know how to safely downgrade to a CM7 ROM. Is it as simple as booting into recovery, wiping, and flashing the earlier rom? Something blur based would be ideal at this point as he's just looking to have a stable phone back. He got into rooting/ roming on his own so I'm not sure what updates, if any, were on there before he started. Is there an easy way to check and see which bootloader version he's on, find out which SBF we can safely use, etc? He does have it unlocked, so that should make things easier (or maybe harder, this Atrix really is a mystery to me...).
TL;DR - How do you safely downgrade an Atrix 4G from CM9 to CM7 and which recovery is the best to be using?
I used to switch between CM10 and CM7 all the time, if the phone is rooted and bootloader is unlocked, it's as simple as wiping data/cache, wiping dalvik, format system, install ROM, boot, reboot, install gapps.
Did your friend follow directions and make a nandroid of original before wiping? That would be the simplest way.
エイトリックス から 送ります
He said he had a backup but that when he restored it it was bootlooping. I'm assuming it was some kind of issue with switching recoveries or something like that. With the Droid X there was a recovery for 2nd-init roms and a recovery for blur roms. With the Nexuses it's mostly TWRP or CWM but as long as you're on the latest you can flash anything. Is there any reason to downgrade recoveries on the Atrix? Is there one "up to date" recovery? I see a lot of posts that point to a 2011 thread with the "latest CWM based recovery" but that seems kind of old...
Alright so I think I have this sorted out for the most part, and my understanding is that RomRacer made a version of CWM that we should be using on the Atrix. I just can't find a link to download the thing, is there a thread in development? When I search all I find is a ton of threads telling me to use it and no one linking it.
Edit: http://forum.xda-developers.com/showthread.php?t=1204500 Right?
Or is TWRP better?
http://teamw.in/project/twrp2/72
Lot of people love TWRP, but I'm one of the few that still uses RomRacers CWM 5.0.2.7 (I think) and no issues flashing CM10.1 (android 4.2.1) Had it for over a year, and works great every time. If it's not broken, don't fix it.
As for the boot loop, those are usually fixed with a wipe. Try wiping everything and restoring.
Edit: Yeah, that seems like the proper thread. Sorry, haven't looked at it since I first rooted my phone. Try TWRP, most people swear by it. The touch does add a nice feature, but I'm too lazy to make the switch.
エイトリックス から 送ります
Once you have an unlocked BL and a custom recovery, switching between pretty much all ROMs is safe so long as you stay away from SBFs.
You can flash to stock rom and then install CM7 :laugh:
ravilov said:
Once you have an unlocked BL and a custom recovery, switching between pretty much all ROMs is safe so long as you stay away from SBFs.
Click to expand...
Click to collapse
Thanks for the help, I'm glad I checked in. On the Droid X whenever anything went wrong and someone posted a thread like this the first ten replies were "Just SBF" - that used to be safe, until they rolled out .621, but that was end-of-life anyway.
I digress; next time I see him we'll iron this out and he'll be off to the races. Thanks again.