I have big and annonoying problems with my sd-card !
If i plug my cable in my phone and in my pc the screen shows: "Choose a connection type". then I select: "disk drive"
and my pc shows following window: take a lot at the screenshot - sorry not in english
then I select the first one [ repair Removable Disk [I:] (recommended) ]
the repair starts.. and after 10-15 sek. my sdcard switchs to the other mode :
from "disk drive" to "charge only"..
the same problem if i ignore the repair. i want to copy files to my phone.. it starts.. and after 10-20 sek. it stops. => and again i am in the "carge only" mode
(my HTC Desire recognizes my sd without any problems..if I insert my sd-card in a sd-adapter - my pc does not recognizes the sd card. - same problems with every rom)
I need help ! some ideas ???
Related
I have the Samsung drivers installed on my PC (Win XP). When I connect the phone with a USB cable I see two drives - presumably the main memory and the SD card. But when I click on either of them I get a message: "Please Insert Disk in Drive X"
What do I need to do to be able to actually see the content?
If I insert the SD card in a regular card reader I can read and write it.
I tried setting the USB connection to "Development" and to regular storage. Makes no difference.
Please Help
When you plug the phone into the computer, open your notifications bar at the top of the phone. You should see an option that says, 'USB connected / Select to copy files to/from your computer.' Select this option, and click mount. After a few moments, the drive letters that you said were not functioning on your computer, will work successfully.
Thanks for the reply. It helped a lot. The procedure that worked for me is:
1. Set the USB mode on the phone to "Mass Storage"
2. Plug in the USB cable and connect to computer.
3. After the "Connected to USB message appears press the Menu button. Chose Notifications and than click on the USB Connected message.
previous I still can connect with storage phone. When connect to pc will be 3 selection is "1. Connect your phone. 2.Install PC Conpanion. 3. Charge phone". I use "install PC conpanion" to access phone storage.
But after a factory reset, when connected to pc, only two choices are "connect your phone", and "charge. " When selecting "connect your phone" only connect to the sd card.
plz help me!
Hi.
I have Project-V rom.
I connected my Phone to pc and selected Mass storage.
My computer showed 2 drives in "My Computer"
I go to the internal storage and from there clicked on "external_sd" (If I remember right).
after 3 sec. the file browser on the pc closed and since then my PC not recognize my phone anymore.
Every time I'm connecting my phone I got "USB NOT RECOGNIZED"
I tried to connect another t959 phone to the same computer with the same cable and same usb port and everything was ok (that say that its not the usb port \ cable \ drivers \ windows ....)
I put the phone on Download mode and tried to find it with Odin => Not Recognized.
I tried to remove the SD card and connect to Pc => Not Recognized
Tried to remove SIM => Not Recognized
One thing that still working is the charging... => its look like the charging work perfect (when I connect my phone to computer \ wall charger the bat icon change and the presents are going up).
ANY HELP PLEASE?????
asher_pa said:
Hi.
I have Project-V rom.
I connected my Phone to pc and selected Mass storage.
My computer showed 2 drives in "My Computer"
I go to the internal storage and from there clicked on "external_sd" (If I remember right).
after 3 sec. the file browser on the pc closed and since then my PC not recognize my phone anymore.
Every time I'm connecting my phone I got "USB NOT RECOGNIZED"
I tried to connect another t959 phone to the same computer with the same cable and same usb port and everything was ok (that say that its not the usb port \ cable \ drivers \ windows ....)
I put the phone on Download mode and tried to find it with Odin => Not Recognized.
I tried to remove the SD card and connect to Pc => Not Recognized
Tried to remove SIM => Not Recognized
One thing that still working is the charging... => its look like the charging work perfect (when I connect my phone to computer \ wall charger the bat icon change and the presents are going up).
ANY HELP PLEASE?????
Click to expand...
Click to collapse
Try uninstalling then reinstalling drivers
hi,
thanks for your help but this is not the problem...
As I say when I connect another vibrant phone to the same computer everything is working....
BTW.
I can assess the files in the internal & external SD from the phone itself and everthing else on the phone (BT \ WIFI \ GPS \ Siganl) working OK....
Any other help please..
I know the in "disk on key" if you removing it without the "safe remove" in the windows there is possibility that any pc will not recognize it util it will get formatted again....
can it be my problem to???
as i say the phone was closed the "usb connection" while the phone was in "Mass Storage" mode....
H-E-L-P
I'm lost
JUST THINKING,,,
If I want to know from were is my problem (software \ hardware)
Is there any way to get to phone files when the phone is on "CLOCKMOD RECOVERY"
Thanks.
S-O-L-V-E-D
open the phone very carefully and clean the connector with alcohol...
Very scary but W-O-R-K-E-D-!-!-!
Hello, I have updated to Cyanogenmod 7.1.0. (stable version) and installed gapps on my phone (HTC Legend, rooted) but after that android market didn't work. So I decided to reinstall gapps with recovery thing (vol. down + power button) and after that some strange artefacts started over phone's screen. So, when I power up phone it behaves normally but I can't access my SD card (goldcard) and in settings > storage > is says that "total space" and "available space" are unavailable and I can't press mount SD. When i try to mount my phone via USB cable on pc, only USB debugging pops up and i can't mount my internal or SD card storage. After some time even USB debugger is stopping to work.
I tried to factory reset it but it didn't help. When I plug in my phone i get errors like "Windows has stopped this device because it has reported problems. (Code 43)" or "This device cannot start. (Code 10)". Also, when i shut down my legend and power up it , the first "htc" white screen keeps blinking untill i plug usb cable and then i can normally enter in ROM.
Can you please help me with my problem or do you think that my phone became a brick?
Hey guys!
I'm having a problem with my SD Card here...
The SD was normal, my phone was normal too, but I decided to Unlock my Bootloader...
The bootloader is unlocked now, I installed a custom kernel "NaA" and I reflashed my room, just to make sure.
But, after all this, the SD Card problem begun...
Every time I connect my phone to the PC, the message "touch the button to connect bla bla bla" appears normaly, but when I touch the button to see the content of the SD Card on my PC, automaticaly appears the message on the StatusBar that I can safely remove my SD Card.
I cant formmat via PC, because he dont recognize my SD (Because of the "touch button" problem)...
What can I do?
Thanks!
Well, I've no idea what's causing that but you should be able to see what's on the SD card via your PC by using the memory stick adaptor that came in the box with your phone. Or try buying a memory card reader.
Or..when you connect your phone to the PC, don't select the option to view your files on the window that pops up, just select the bottom option instead ("Charge Phone" or something similar). Then use your pull-down menu and select the USB Storage option.
Normally, this lets you view the contents of your memory card on the PC. Because I don't know why you're having the issue you are, I don't know if this'll work or not but it's worth a try.