Related
Hi just received my GTablet and have installed ClockworkMod v08. Next, I am attempting to install the TNT Lite Rom but I am having trouble connecting to my home router.
The response I keep getting when trying to connect is to the point of "Obtaining IP address.." then it disconnects. I am sure it's not the wireless router but just to be eliminate possibilities, I've even switched off all the security with connect to the router, but the sames results. It keeps trying to re-connect. I can easily connect with my other PCs and printers.
Any ideas? Thanks in advance.
Hello there,
did you ever solve your wifi problem, I am currently running the latest TnTlite, and this just started happening to me as well. It just hangs in Obtaining Ip then it disconnects.... I have never had this problem before in fact was online on the tab last night, now it seems i cannot connect... I will see if I can connect in another location hope nothing happened to the Tab..... BTW I tried restarting as what was suggested but that did nothing for me also....
Are you broadcasting your SSID?
Can you take the tablet somewhere else and try connecting at a Star Bucks, or a library, or something. See if it connects ok there?
Also, if it doesn't connect anywhere. Try flashing a different ROM to see if it is just that one.
I've had the same problem. I do not seem to be able to connect to any wifi that is encrypted with WPA. At work, we are WPA and I cannot connect at all. At home, I have WEP and can connect. I thought it might be something with the wifi settings on the tab, and have searched and searched and cannot find anthing.
By the way, this is my third tab and none of them could connect to a WPA encrypted router. The first two I returned as defective. IF there is an answer, I would love to hear about it.
Also, this is my first android device. I have been messing with Windows phones for a long time...thanks to the great people on this site.
Sorry to hear about your wifi problems. Just to let you know my experiences, I've (in the week I've owned my tablet) run TnT, VegaN and cyanogen (latest of each) and have never had a problem connecting to my home wifi - I do not broadcast my SSID at all and use WPA2/PSK encryption. You both mention WPA - can either of you try WPA2/PSK?
But on saying all of that, if you can't even connect to your wifi point without any security involved, it sounds either:
1) Hardware - faulty tablet but you said you're on your third so that sounds unlikely. Remember, while the tablet supports wifi G/N it does so over 2.4Ghz so if you have a router that only does 5Ghz or is set to work exclusively over 5Ghz, your router will not see your tablet
2) Software related - Have you reflashed your kernel at all? Did you possibly install a kernel (not rom) that does not have wifi drivers installed or something similar?
I hope something above might help you....
I was never able to connect to the wireless router. I shut all the security off, reset the router, rebooted the tablet but still the same results, "obtaining IP address" then it fails and tries again. I could connect to my neighbors Linksys so I know the tablet wifi is ok. I also so know that the router was ok since it had been serving my other PCs & printers for a number of years. It just wouldn't connect to each other.
The problem still persists.
+++++++++++++++++
Running TNT Lite 4.2.1
bevbeng said:
I was never able to connect to the wireless router. I shut all the security off, reset the router, rebooted the tablet but still the same results, "obtaining IP address" then it fails and tries again. I could connect to my neighbors Linksys so I know the tablet wifi is ok. I also so know that the router was ok since it had been serving my other PCs & printers for a number of years. It just wouldn't connect to each other.
The problem still persists.
+++++++++++++++++
Running TNT Lite 4.2.1
Click to expand...
Click to collapse
You didn't answer in your response above, is your router a 5Ghz router or 2.4Ghz? Could the frequency of your router be causing your problem here? Remember the tab only supports 2.4Ghz frequencies
1. if your tablet can connect to your neighbor's router, then problem lies between your router and the tablet.
2. is your router a linksys? what wireless router are you trying to use?
3. are you using mac address filtering? is dchp enabled on the router or by some sort of home server?
4. your tablet can see your router, but for some reaon they cant agree on how to talk to each other. i'm on a linksys wrt54gsv4 and havent had a problem, not with default settings or wpa2 or mac filtering or the custom firmware i eventually installed on it (ddwrt), tomato)
Sent from my GTablet-TnT-Lite using Tapatalk
bevbeng said:
Hi just received my GTablet and have installed ClockworkMod v08. Next, I am attempting to install the TNT Lite Rom but I am having trouble connecting to my home router.
The response I keep getting when trying to connect is to the point of "Obtaining IP address.." then it disconnects. I am sure it's not the wireless router but just to be eliminate possibilities, I've even switched off all the security with connect to the router, but the sames results. It keeps trying to re-connect. I can easily connect with my other PCs and printers.
Any ideas? Thanks in advance.
Click to expand...
Click to collapse
You are ATTEMPTING to install TnT ROM? You dont need the Internet connection, just sideload it then install. Am i Right?
Then after you install the TnT rom, sideload also the Kernel TnT base with wifi fix.
http://forum.xda-developers.com/showthread.php?t=895825
Hope this will solve your problem.
Good luck
powercrazy said:
You didn't answer in your response above, is your router a 5Ghz router or 2.4Ghz? Could the frequency of your router be causing your problem here? Remember the tab only supports 2.4Ghz frequencies
Click to expand...
Click to collapse
I have an older Microsoft 2.4Ghz B/G wireless Router. I'll try to sideload the Kernel TNT base with the WiFi fix.
Thanks for the tips.
Since the original posting I have got TNT Lite installed (using my neighbors router)
bevbeng said:
I have an older Microsoft 2.4Ghz B/G wireless Router. I'll try to sideload the Kernel TNT base with the WiFi fix.
Thanks for the tips.
Let us know if it solve. If not, I think you have defective unit.
Goodluck!
Click to expand...
Click to collapse
Something else occurs to me out of pure ignorance. I'm not sure how Android stores profile information. But I know with both mac and windows I've had occasion where "forgetting" the network and letting the device rediscover it has solved problems.
It sounds like you've been down that road already. However, it does bear asking. It's the more obvious things we often forget to consider.
Well it looked like the tablet needed to be reset a couple of times as i was just online with it... now the tab just froze, shut off and now i cannot turn it on... off to another thread to see what to do now... god i hope this thing is not bricked....any suggestions on what is a good thread would be appreciated... off i go.......
edit: found a thread now to find the internal reset button. thanks to all at xda....
RyuFDAC01 said:
Well it looked like the tablet needed to be reset a couple of times as i was just online with it... now the tab just froze, shut off and now i cannot turn it on... off to another thread to see what to do now... god i hope this thing is not bricked....any suggestions on what is a good thread would be appreciated... off i go.......
edit: found a thread now to find the internal reset button. thanks to all at xda....
Click to expand...
Click to collapse
Try to hold the power button for a long time and maybe it may turn back on. Before doing your last resort (disecting the tablet).
I had a problem with my wifi going into loops when I first got the unit. It would show it connecting/disconnecting/connecting/etc as described in the first post.
I had another router (both the same makes - Linksys WRT54G but different model numbers) so I tested the other router and I connected fine. I haven't gone back to test the first router yet and I am using the 2nd one.
The router I couldn't connect to has DD-WRT micro on it, and I haven't had problems connecting other wireless devices to. The one that is working fine with the g-tablet now has Tomato on it (it is a lower version number which supported Tomato).
Too bizarre... I now have this problem.
I received my gtablet today and installed clockwork mod recovery and vegan-tab ginger RC 1. Or, essentially, I followed the instructions here and got everything working. http://forum.xda-developers.com/showthread.php?t=865245
Wifi worked fine until the evening. Wifi is on, and in the settings under the SSID of my wifi network, it says Obtaining IP address for a minute until it says Disabled, network in range. I've done some common trouble shooting, like restarting, turning wifi off and on, forgetting the network and reentering password. That didn't work. My cell phone has a mobile hotspot feature and the gtablet CAN join that. I wonder what gives... I hope someone can help.
(This could be just coincidence, but it's about when I powered up my desktop computer. The desktop connects to the internet through a DMZ router that has a wired connection to the wifi router in another room. The desktop is now off and the gtablet still has this problem.)
Ok. Resetting my router fixed it. I never thought that my router could just "dislike" one particular device. I thought for sure something had to be wrong with the device. Forgive my ignorance!
G Tablet Wifi
I do not transmit my SSID and this has never been a problem with any of our laptops or netbooks. When I first received my G Tab and tried to connect to my network, even though I had entered the SSID and Passphrase correctly, it still would not connect. As soon as I set my wireless router to transmit the SSID the G Tab connected without any problems.
This is the first time I've encountered a problem of this nature. Comments?
This is what worked for me. I posted this in a similar thread as well.
Hey, I had WiFi connection issues too. I just got a Viewsonic G-Tablet with the Android 3.0 OS and have a D-Link DI-524 wireless router. It could see router and would try to connect, but would cycle and never connect. I could try to connect to other available networks in the area. It connected fine to an unsecure network, and when I tired to connect to secure networks there was a place where I could enter a network key/password. However, I noticed this option was not available on my network when I tried to connect. I reset my router which did not help. I then chose the option to add a network on the tab. This worked!! I was able to enter the key from the add a network option. I then told the "bad" connection to be forgotten. Hope this helps someone else, as I had looked on the internet for awhile for an answer. I was about to buy a new wireless router too!! Oh, I am using WEP too.
edit: ok when I power my tablet back on the same issue was happening. This time I could enter a network and the cycling still contiuned. I even forgot and re-entered the network. The fix this time was to reboot the tab. However, my internet has been acting up lately so IDK.
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
In my case the problem was with frozen "WiFi sharing" in combination with juicy defenders "Location" fearure. It seems such combination is dangerous. Solutin (in my case):
1. defroze
2. remove all wifi networks
3. reboot (for "clean" frozing)
4. make WiFi sharing frozen
5. reboot again just for fun
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
as above, check that there is no MAC filtering set up.
one other thing it may be is the security settings, if you have a WEP Key to access the router it may need the Hex conversion of your key depending on what level of security you have (64bit or 128bit for example)
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
I have a similar problem and I fix mine temporarily by turning my wifi off, then in wifi settings > advanced, I change wifi sleep policy from 'never' to 'only when the screen is off'. However I have to do this every time I want to use wifi so it can become quite annoying sometimes.
So I can get through however only for a short period of time as it seems as long my Galaxy S2 keeps turning off my wifi even though it's on :/
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
SiSL said:
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
Click to expand...
Click to collapse
Thanks for the suggestion but MAC restriction is already disabled at router
Robsso said:
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
Click to expand...
Click to collapse
Yes, you are right this is not an issue for me.
In fact my SG2 being assigned with an IP address from 192.168.1.xx subnet.
Also at a same time my laptop connected with an IP from same subnet able to ping SG2.
OccasionalDroid said:
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
Click to expand...
Click to collapse
My SG2 being assigned with an IP address from 192.168.1.xx subnet.
So I think IP addressing may not be an issue.
Also another thing I tried was, at a same time my laptop connected with an IP from same subnet able to ping SG2.
So wi-fi router may not be an issue here, whats say ???
Even I am facing the same issue at my office network. I am able to connect to the wireless network but if I try to access any app I cannot browse. This is really frustrating looks like some issue with the modem drivers.
I was able to browse on another wifi created virtually by mobile tethering. This looks like a major bug with the current firmware. Another interesting thing to note is that the Wifi network has a hidden SSID and uses WPA2 auth scheme.
I have seen a Galaxy S able to connect to the same n/w without any issues.
Has anyone figured out a solution to this one ?
Hi, thanks for your reply.
I am yet to figure out a solution for this
Even I am also agree on the probable issue with modem driver.
I've D-link modem.
Are you aware of anything about this modem that can be reconfigured to get this worked ... ?? pl let me know
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
I'm having the same problem at work connecting my SGS2 with v2.3.3 Official Firmware (customized for Orange service provider) to a Cisco Aironet 1130 AP. I can see that the Galaxy authenticates with the AP correctly and gets IP from the DHCP server, but it cannot send or receive any traffic, although the phone stays connected and authenticated. At home, I use an Atheros based Fonera with DD-WRT without any problem.
As I'm the company's network administrator, I will try to further investigate this problem, but it seems like some kind of incompatibility between the devices or misconfiguration ....
Basuk said:
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
Click to expand...
Click to collapse
try turn off the wifi, turn off the mobile data and turn on the wifi again
It seems the SGS2 sometimes has problems with DNS.
Try a static IP and use 8.8.8.8 as second DNS server, which is a free Google DNS server.
This fixed MY problems
I rooted my SGS2 and voila wifi worked at my office finally I have been able to find a solution.. love my SGS2 the Beast...
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
ETA:
I can connect to hotspots (DHCP) and at home (Have to set it to static tho)
No internet
AP works - Laptop and i8910 (had to set static and advanced settigs etc). I've rebooted it a few times, set DHCP on and off. DHCP seems to be running on the router
viqles said:
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
Click to expand...
Click to collapse
This is an issue with SGS2 with wifi server using authentication protocol TPIK, if you use AES as encryption then it will work without any issues.
That should be a setting in my AP? I can't see it...
If I get a new non-crappy AP is that likely to solve my problem?
ETA:
Ah - that's a WPA thing? Mine only seems to do WEP - is that right?
Or "work around" rather.
I've found that if I assign a static IP to my Touchpad via MAC reservations, the disconnect issue seems to go away. Just some food for thought.
Sent from my Touchpad using Tapatalk
really ?
have to try it (desper) ... but dont understand why
Just assign your router to search on Ch 4. This fix has been talked about several times on rootzwiki. Ive tried it and it works. Don't even bother with a static IP.
ericdabbs said:
Just assign your router to search on Ch 4. This fix has been talked about several times on rootzwiki. Ive tried it and it works. Don't even bother with a static IP.
Click to expand...
Click to collapse
My router is set to Channel 4 and that made it stable for the most part, I still had disconnects on rare occasion. Assigning a MAC reservation seemed to stop it altogether.
out of curiosity...when people says they have wifi issues? What kind of issues are these? I am using TP for some time now...i never had any issue...only issue i have is that it doesnt connect to google server on Android very well....but i can surf internet and stream radio continuously
Reboot router fixed the wifi problem
Found this by luck.
Reboot router actually fixed the wifi problem and i am not sure why.
When problem with occur for the wifi, rebooting on touchpad or reflash, it did not work. It seems like router actually locked out the mac address. I am using linksys router but unable to find anything from the log or something. Only rebooting router will fix this issue. Very strange.
I am actually having the strangest problem with my wifi.
Down on the status bar, the wifi indicator is gone. I have tried toggling it. I reinstalled 2.1 from A3. I have cleared cache and dalvik
Yesterday, I did switch from Comcast to UVerse, but I was able to connect my Touchpad just fine. Today I simply rebooted my Touchpad to try to fix the haptic feedback (something I have done numerous times). And now there is no icon and I can't connect to my wifi. Anyone else had these problems?
Hello since I update my samsung galaxy SIII to 4.2.1 when I try to connect to my wifi network my device keeps telling me "obtaining IP address" and nothing more, never conects to my network. that is weird because it was working before the update. There is a way to fix this? I dont want to set and static IP address it seems stupid to me. I need help to fix this please. Thanks you and pardon my english (its not my native language).
I had the same problem with a Galaxy Tab, I'm not sure if this'll fix it, but if your phone's rooted, if you go in to the main root, misc, dchp and delete the DHCP list, that may well fix it.
Hello guys, i have a problem about connecting to wifi. I have been using the same ROM for a year, but since this morning i have a problem on connecting to the wifi, it says Obtaining ip address but it just never ends. I changed the ROM two times today, nothing has changed. I think the problem might me caused by the wifi antenna itself just because it's old (bought the device two years back), but i mostly believe in it's an inner software error, if there is a possibility about it's a software error can you help me to find out what it is and fix it?
Thank you (Device-> YP-G70)
FIGURED OUT HOPE THIS HELPS ALL OF YOU:
Use static ip on wifi settings, and as ip address i don't know if this works in all countries but enter 192.168.1. (some value between 1 and 200) as gateway enter 192.168.1.1 and as netmask you can use 255.255.255.0 this solved my problem thanks
Happened to me once...wiping data fixed it. You should try that.
Sent from my YP-GI1 using xda app-developers app
drakonizer said:
Happened to me once...wiping data fixed it. You should try that.
Sent from my YP-GI1 using xda app-developers app
Click to expand...
Click to collapse
I tried that way and it didn't work out but finally i figured out what happened, i had the same problem a month ago on all my computers and tablets and phones they didn't connect to my wifi so i entered other ip adresses gateways etc. that i found on a webpage and they connected, the thing is i found the ip online and when you enter it on two devices working on same network it will discconnect one of the devices, does anyone know where can i find more alternatie ips' like that? Hope that will be helpful to the friends who has obtaining ip address loop problem.
isitan said:
I tried that way and it didn't work out but finally i figured out what happened, i had the same problem a month ago on all my computers and tablets and phones they didn't connect to my wifi so i entered other ip adresses gateways etc. that i found on a webpage and they connected, the thing is i found the ip online and when you enter it on two devices working on same network it will discconnect one of the devices, does anyone know where can i find more alternatie ips' like that? Hope that will be helpful to the friends who has obtaining ip address loop problem.
Click to expand...
Click to collapse
Let me see if I understand what you're trying to do. You have multiple devices, not just your YP-G70, connected to a router. The router is distributing IP's, some of which are static, some of which are DHCP. The key is to make the router assign static IP's outside the DHCP range.
For instance, if your router has a gateway 192.168.1.1 with a subnet mask of 255.255.255.0, that gives you 254 addresses to choose from. Typically, the DHCP range is fifty addresses, from 192.168.1.100 to 192.168.1.149. So long as you assign your static IP's outside the range of .100 to .149, you should have no conflicts. I generally assign printers, NAS, other services lower IP's. 192.168.1.4 might be a printer. 192.168.1.6 might be a PogoPlug. Desktops/laptops with static IP's might be in a range of 192.168.1.20 to 192.168.1.40. Tablets and phones might be from .60 to .80. When friends and extended family visit and want to borrow some wifi or ethernet, they use the DHCP range -- .100 to .149.
Make sure to use the most secure method for wifi available on the router, usually WPA2 Personal (PSK) + TKIP / AES. Give your friends the random-10-digit-or-more-character password you created to keep your wifi secure, and they're in. If you have trouble getting in, delete the saved wifi connection to your router in the network connections area on the YP-G70 and recreate it. You should be in.
Did you changed your router before? I had same problem AFTER changed my router (from old router linksys 54mbps mode 11b/g, now using tp-link 300 mbps mode 11b/g/n)... i've tried several type and brand (tp-link, tenda etc.), same results. My assumption for now, YP-G70 is not compatible with router above 54mbps or mode above G.
Just my two cents.
arronov said:
... My assumption for now, YP-G70 is not compatible with router above 54mbps or mode above G. ...
Click to expand...
Click to collapse
On a lark, I set my ASUS RT-N16 router using tomato-USB firmware to N-only. I am assuredly connected via my YP-G70. Samsung bills the YP-G70 as b/g/n compatible. Perhaps the problem is with one or more specific router models?
Laughter On Water said:
On a lark, I set my ASUS RT-N16 router using tomato-USB firmware to N-only. I am assuredly connected via my YP-G70. Samsung bills the YP-G70 as b/g/n compatible. Perhaps the problem is with one or more specific router models?
Click to expand...
Click to collapse
After i'm going back to stock rom (G70XXKD6), wifi's going back to normal. Even when it paired with any N mode router. So the main problem because i'm using custom rom