Hi everyone,
I'm trying to apply the update on my razr EN.EU (ex EN.FR) but I always receive an error (status 7).
I know the other had the same error and my question is if someone has a solution.
Thanks
Flash the Fastboot images that you can find in the Firmwares thread.
I did the flash with RSD to convert my rom from EN.FR to EN.EU.
The OTA update have to be applied via recovery (if i have read right)
if not please point me to the file I have to use.
Thanks
My razr vers is:
Android: 2.3.5
Sistema: 651.73.23.XT910.Retail.en.EU
Modem: U_03.1C.83P
Kernel: 2.6.35.7-ge209671
Are you trying to flash in stock recovery or in bootstrap recovery?
Well I think stock recovery.
I start the device with vol+,vol- And power. than recovery.
Thanks
gerazzo said:
Hi everyone,
I'm trying to apply the update on my razr EN.EU (ex EN.FR) but I always receive an error (status 7).
I know the other had the same error and my question is if someone has a solution.
Thanks
Click to expand...
Click to collapse
Same error here. ex EN.FR Razr XT910 now is En.EU but won't update! Why? Any solution ? Or idea?
Same error. The backround of the issue ;
I was rooted with the 651.73 rom, then applied the update to 651.150 rom. Flashed back to 651.73 rom with rsd lite. Now i can't apply the OTA and get the STATUS 7 error.
Firmware eu needed
kholk said:
Flash the Fastboot images that you can find in the Firmwares thread.
Click to expand...
Click to collapse
Where i can find the firmware thread? I tried everywhere, maybe my mistake but i still cannot find the eu rom, i have fr rom.
Please help
Here is the firmware thread
Related
Hi guys and sorry if there is an answer to my post but i cant find any. the problem is that i am in 651.73.30 retail en.eu (2.3.5) rooted and i am trying to apply update 651.167.20 and every time i press apply update.zip i get an error
assert failed: apply_patch_check("/system/framework/framework-res.apk"."acd7728.......)
E: Error in tmp/sideload/package.zip
(status 7)
Installation aborted.
any ideas on how to solve this and install the update?
also is that a good move or i should stay on 651.73.30 until motorola give out the update?
thank you in advance
Finally made it i restored to stock rooted install the update again and now i am on 2.3.6 now i ll flash the ics
thank you
hello what is the most recent or best build for the UK EU Razr ?
I have 651.167.26.XT910 Retail.en.EU
Device is "up to date"
got a link to that rom
Here you go: http://forum.xda-developers.com/showthread.php?t=1560300
Couldnt get the update to work but thanks anyway , after some searching and trying to figure out rom names as they are quite confusing found this german site that had the rom http://www.handy-faq.de/forum/motorola_razr_forum/231955-motorola_razr_firmware_fuer_rsd_lite.html
How are you trying to install it?
I moved from Kangs ICS rom back to stock the other day with no issues.
Are you using RSD to install? That's how I did it.
Tools, rsd is 2nd one down.
http://forum.xda-developers.com/showthread.php?t=1539192&highlight=rsd
i tried the AOKP jydaddy rom for few days now pretty good but decided to go back to stock SPDREM_U_01.6.5.1-167_SPU-15-M2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml
and then i flashed RSD LITE and full SPDREM_U_01.6.5.1-167_SPU-15-M2-3_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml
which is the 651.167.26
but the update from 651.167.26
SPDREM_U_01.6.5.1-167_SPU-15-M2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml did not work
thats why i flashed the full 651.167.26 rom SPDREM_U_01.6.5.1-167_SPU-15-M2-3_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml
lol it is confusing
Hey guys,
I used Odin3 One-Click Downloader to flash UCKH7-CL503881 stock kernel and system package. When I connect my phone to Kies, it says that I have the latest firmware: Android Version 2.3 & Baseband Version UCKK6.
It is not showing the ICS firmware available for update. Could someone tell me why ?
Thanks !
Hey I'm sorry guys. I kept searching after I posted this and magically I found a post that said to type in the serial number of the phone into Kies when the phone is disconnected to download ICS.
Sorry for wasting your time.
Thanks.
dorifuto.boi said:
Hey guys,
I used Odin3 One-Click Downloader to flash UCKH7-CL503881 stock kernel and system package. When I connect my phone to Kies, it says that I have the latest firmware: Android Version 2.3 & Baseband Version UCKK6.
It is not showing the ICS firmware available for update. Could someone tell me why ?
Thanks !
Click to expand...
Click to collapse
Hey guyzz.. i need a help.. i have a moto e xt1022. i had rooted it and unlocked its bootloader and today i installed xperia z2 apps using reecovery. after rebooting it just stucks on the motorola logo.. i tried to install the stock firmware but it gives the error saying flash prefetch failed in the first step. the recovery is also gone now.:crying: please help me to get my phone right again.
Download the 4.4.4 XT-1022 firmware and follow this method!:good:
TheStrix said:
Download the 4.4.4 XT-1022 firmware and follow this method!:good:
Click to expand...
Click to collapse
will it work man..:crying: what i did was upgraded to android 4.4.4 . so i think that it cant be downgraded to 4.4.2. thats why its giving error.. can u please give me the links of the official image of the stock 4.4.4 firmware of xt1022 dual sim version.. pease brother help me
wheni am doing the above mentioned steps in the link with the stock android 4.4.2 firmware , then in the first step i.e the command mfastboot flash partition gpt.bin it gives an error saying preflash validation failed. now tell me what to do
Abhayprakash32 said:
will it work man..:crying: what i did was upgraded to android 4.4.4 . so i think that it cant be downgraded to 4.4.2. thats why its giving error.. can u please give me the links of the official image of the stock 4.4.4 firmware of xt1022 dual sim version.. pease brother help me
wheni am doing the above mentioned steps in the link with the stock android 4.4.2 firmware , then in the first step i.e the command mfastboot flash partition gpt.bin it gives an error saying preflash validation failed. now tell me what to do
Click to expand...
Click to collapse
As you have updated your hone to 4.4.4, you cant downgrade it.. You need to flash 4.4.4 firmware image...
Go here and download the XT-1022 firware (Retail Asia / World) image!:good:
Hi,
I have a lite version with firmware version 20160318. I tried the existing method of flashing TWRP. However the flash fails eventually. I believe this is because of the different ROM version.
Anyone know how to?
Thanks
I have same problem
Same here
This thread claims it works on both - http://bbs.elephone.hk/thread-9910-1-1.html#.VxpqyPkrLIV
shailo said:
Hi,
I have a lite version with firmware version 20160318. I tried the existing method of flashing TWRP. However the flash fails eventually. I believe this is because of the different ROM version.
Anyone know how to?
Thanks
Click to expand...
Click to collapse
Which error did you recieved? How to understand "flash fails eventually"? I guess it is your fault or may the fault of your SP flash tool version
i need root too on my p9000 lite
Why haven't you updated to 04 22 version? It's not on the OTA, but the flash zip was released on the russian 4pda forums. I have no problems with my P9000L, it's rooted and works just fine