I have a big problem !!! I had on my phone root s-off ROM Shooter Beats 1,7 and I flashed CWM 4.0.1.-shooteru via fastboot.
BUT when I was in fastboot USB I was thinking that I will try to have root with s-on on the screen on HBOOT. So I used command that I read in unroot section.
fastboot oem fastboot oem writesecureflag 3 and then reboot bootloader and my pfone is off and I cannot turn it on and dont know what to do :-( I am scared
can you access the bootloader? try a battery pull then reinsert and try to access bootloader again
Related
HTC Flyer 3G
Unlocked via htcdev.com
Recovery Revolutionary CWM v4.0.1.4 via adb
Rooted with Superuser-3.0.7-efgh-signed_root
Flashed [ROM][Honey Sense][5 April]Cool3D Honey v4|3.63.708 at http://forum.xda-developers.com/showthread.php?t=1409296
I overlooked the note:
If you have achieved S-Off via HTCDev.com, then you need to extract the boot image from Cool_ROM.zip and flash it via fastboot "fasboot flash boot boot.img"
Click to expand...
Click to collapse
..and flashed via recovery without extracting the boot image.
Problems: Bootloop and returns to recovery mode (revolutionary)
I have tried to do a restore but it does not do anything.
I have tried to flash the bootimage via adb (after 'adb devices') but I get a 'waiting for device' message and nothing is happening.
Question is: What can I do from here to correct my mistakes?
You do not flash it through adb you flash it through Fastboot while your flyer is in Fastboot mode
mcord11758 said:
You do not flash it through adb you flash it through Fastboot while your flyer is in Fastboot mode
Click to expand...
Click to collapse
Thank you for your respons!
Yes ofcourse it's Fastboot, silly me, and now it seems to flash the boot image. Never the less it keeps bootlooping. It reaches the lockscreen and then reboots.
I first factory reset, then flashed the rom and then I flashed the boot image in Fastboot mode. Am I doing this wrong?
Antoher thing is, I noticed this in HBOOT screen:
*** UNLOCKED ***
FLyer PVT Ship S-ON RL
It is unlocked and S-ON?
Take your sim out and try
Yes I tried that and it seems to work. I have not yet tried to put back in..
Remove sim lock pin code
mcord11758 said:
Remove sim lock pin code
Click to expand...
Click to collapse
How can I remove sim lock pin code when in a boot loop?
it's my first time I flashed my htc
I made a hboot flash to my htc amaze I got in to recovery mode and I received a red triangle I pulled the battery cause I couldn't cancel it.
and now it boot loops I can't get in the fastboot with vol down+power
but the USB charge it and I see 2 removeale device but I can't open this device
am I bricked my htc?
Thanks
I think as long as your computer can recognize your phone, it can be saved. Maybe you can try the unbricking project?
Try this command with adb
fastboot reboot-bootloader
And see if it boots into bootloader. If not then you can try to flash a recovery.img using fastboot commands. But it might not write the image if it doesn't have a proper hboot.
-------------------------------------------------
We are guinea pigs for smart phone technology.
-------------------------------------------------
The red triangle is the symbol you get when you don't have a recovery I believe.
Try flashing a recovery using a toolkit
Sent from my HTC_Amaze_4G using Tapatalk 2
It might be helpful if you provided some more information.
Examples are:
What hboot did you flash?
How did you flash it? What command was used?
What version was your phone running? Gingerbread or ICS?
Is your phone S-OFF'd? (Your phone is probably S-OFF'd already, or else you wouldn't be able to flash the hboot)
Stuff like that can make a world of difference.
Keylogger_0 said:
It might be helpful if you provided some more information.
Examples are:
What hboot did you flash?
How did you flash it? What command was used?
What version was your phone running? Gingerbread or ICS?
Is your phone S-OFF'd? (Your phone is probably S-OFF'd already, or else you wouldn't be able to flash the hboot)
Stuff like that can make a world of difference.
Click to expand...
Click to collapse
I didn't remember I need to check
The command was fastboot flash boot boot.img
Android 2.3.4 sense 3. Gingerbread
it's. S-on .
I cant send command from the computer now, it works like charge mode.
amitvak said:
I didn't remember I need to check
The command was fastboot flash boot boot.img
Android 2.3.4 sense 3. Gingerbread
it's. S-on .
I cant send command from the computer now, it works like charge mode.
Click to expand...
Click to collapse
wait, are you SURE about the command? Are you SURE it wasn't something like this:
fastboot flash hboot hboot.img
because "fastboot flash hboot" and "fastboot flash boot" are 2 different commands.
I recently had this issue with my one xl. I had flashed a wrong recovery, and my boot image was ****ED, couldnt recognize by pc. U need to find ur stock ruu, and run it. Ul get a boot_signed.IMG and a recovery_signed.IMG. flash both in fastboot.
Fastboot flash boot boot_signed.IMG
Fastboot flash recovery recovery_signed.IMG
Eventho web won't recognize it and other things won't, fastboot commands seemed to work, I learned this yesterday.
when I insert fastboot command ...
when I insert fastboot commands it wait for device
http://www.android-dev.us/showthrea...ne-Toolkit-V3-1-4-9-2012-PERM-ROOT-Noob-Proof
use this toolkit... just boot into bootloader (volume down + power) then select the recovery you want.
boot loader is the white screen
i cant get in to the boot loader
I see only the htc white screen and it boot again
I used HTC unlocker to unlock my phone and installed cleanrom by scott. I need to send my phone back for repair so I HAVE to restore it to stock before I can send it back. I used Juopunutbear and it failed several times. Now my phone seems to be bricked. ControlBEAR.exe is reporting
Cowardly refusing to S-OFF this phone
Error code is: 4E D7 B9 21
Quit....
Press ENTER to exit.....
all I can get to is the fastboot/hboot menu and it says at the top
***LOCKED***
S-OFF
However I cant install anything or get to recovery or anything else. if I reboot the phone it just takes me back to the fastboot menu
I need by phone back up can someone please help me....
scampbell70 said:
I used HTC unlocker to unlock my phone and installed cleanrom by scott. I need to send my phone back for repair so I HAVE to restore it to stock before I can send it back. I used Juopunutbear and it failed several times. Now my phone seems to be bricked. ControlBEAR.exe is reporting
Cowardly refusing to S-OFF this phone
Error code is: 4E D7 B9 21
Quit....
Press ENTER to exit.....
all I can get to is the fastboot/hboot menu and it says at the top
***LOCKED***
S-OFF
However I cant install anything or get to recovery or anything else. if I reboot the phone it just takes me back to the fastboot menu
I need by phone back up can someone please help me....
Click to expand...
Click to collapse
Looks like you may be S-off. Try downloading a stock GB Ruu, renaming to ph98img and put it on the root of your sd card. Reboot and hboot should install it. It will take a while and a reboot once before finishing.
topgun1953 said:
Looks like you may be S-off. Try downloading a stock GB Ruu, renaming to ph98img and put it on the root of your sd card. Reboot and hboot should install it. It will take a while and a reboot once before finishing.
Click to expand...
Click to collapse
I dont have a card reader or extra sdcard so how do I get a stock GB Ruu onto the sdcard?
scampbell70 said:
I dont have a card reader or extra sdcard so how do I get a stock GB Ruu onto the sdcard?
Click to expand...
Click to collapse
You should be able to do a fastboot push.
What would work better would be to fastboot flash Amon-Ra, then you can mount the SD as mass storage.
Sent from my Business ICS Rezound.
scampbell70 said:
I dont have a card reader or extra sdcard so how do I get a stock GB Ruu onto the sdcard?
Click to expand...
Click to collapse
I'm not big on ADB or Fastboot so I can't tell you how using those tools. However, when I needed to recover after several failed s-off attempts, I used this all in one tool and just selected Flash AmonRa recovery.
Then I would boot into recovery, AmonRa has an option to toggle USB to SD card, so then you could copy whatever from your computer to the SD card.
http://forum.xda-developers.com/showthread.php?t=1504824&highlight=all+in+one
Thank you everyone that helped
You can also do the PH98IMG.zip thing this way:
1) Put PH98IMG.zip in fastboot folder
2) fastboot oem rebootRUU
3) fastboot flash zip PH98IMG.zip
4) Wait a long time, when the prompt returns control to you it is done
5) fastboot reboot
6) Let it fire up and all that jazz
7) Then do "fastboot writesecureflag 3" and you will be 100% stock
con247 said:
You can also do the PH98IMG.zip thing this way:
1) Put PH98IMG.zip in fastboot folder
2) fastboot oem rebootRUU
3) fastboot flash zip PH98IMG.zip
4) Wait a long time, when the prompt returns control to you it is done
5) fastboot reboot
6) Let it fire up and all that jazz
7) Then do "fastboot writesecureflag 3" and you will be 100% stock
Click to expand...
Click to collapse
Note that, if I recall correctly, this:
Code:
7) Then do "fastboot writesecureflag 3" and you will be 100% stock
Will return you to S-On
LunaticSerenade said:
Note that, if I recall correctly, this:
Code:
7) Then do "fastboot writesecureflag 3" and you will be 100% stock
Will return you to S-On
Click to expand...
Click to collapse
I believe you're correct. Pretty sure that's in the Dev board about getting S-On, and that's the command to run.
LunaticSerenade said:
Note that, if I recall correctly, this:
Code:
7) Then do "fastboot writesecureflag 3" and you will be 100% stock
Will return you to S-On
Click to expand...
Click to collapse
He is trying to return it so I assume that is the goal.
con247 said:
7) Then do "fastboot writesecureflag 3" and you will be 100% stock
Click to expand...
Click to collapse
Okay I downloaded a stock signed RUU renamed it and put it on the root of my sdcard, when I rebooted the phone the phone recognized and I applied the update. It booted up perfectly and the phone is back on stock GB, I dont see where to writesecureflag though, did I have to do that before I let the phone boot all the way into the OS for the first time? Under the fastboot menu I see no option to writesecureflag, do I need to reflash the stock RUU and start again?
scampbell70 said:
Okay I downloaded a stock signed RUU renamed it and put it on the root of my sdcard, when I rebooted the phone the phone recognized and I applied the update. It booted up perfectly and the phone is back on stock GB, I dont see where to writesecureflag though, did I have to do that before I let the phone boot all the way into the OS for the first time? Under the fastboot menu I see no option to writesecureflag, do I need to reflash the stock RUU and start again?
Click to expand...
Click to collapse
you will need to fastboot oem writesecureflag 3 in a cmd window with the phone in fastboot:
directoins: http://forum.xda-developers.com/showthread.php?t=1612937
scotty1223 said:
you will need to fastboot oem writesecureflag 3 in a cmd window with the phone in fastboot:
directoins: http://forum.xda-developers.com/showthread.php?t=1612937
Click to expand...
Click to collapse
I tried writing S-On but I keep getting the error device offline. I used
There are 4 ways to do it:
Unplug the usb and plug it back again.
Go to the Settings -> Applications -> Development of your device and uncheck the USB debugging mode and then check it again back!
Restart the adb on your PC. adb kill-server and then adb start-server
Restart your device and try again.
Click to expand...
Click to collapse
to try and fix it but no luck it still says offline, any ideas??
scampbell70 said:
I tried writing S-On but I keep getting the error device offline. I used
to try and fix it but no luck it still says offline, any ideas??
Click to expand...
Click to collapse
You will need to be in fastboot. Pull the battery, then reboot holding volume down.
*Note: make sure there is no PH98IMG.zip on your SD card
Once in hboot, select fastboot. Then connect to your PC.
In your command prompt/adb window, type 'fastboot devices' to make sure your PC reads the phone.
Then type 'fastboot oem writesecureflag 3' and you'll be S-On.
Sent from my Business ICS Rezound.
Phone is all back to stock and shipped back for repairs thank you all very much for your help
hi I have an htc evo 3d gsm . i relock with this "fastboot oem writesecureflag 3"
I restored the device whith this guide:
http://forum.xda-developers.com/showthread.php?p=25501212
now the devices , if I plug the cable on pc turns on in fastboot.
HBOOT-1.49.0007
RADIO-11.25.3504_06_M
How do I flash a ruu ?what exactly?
If you have unlocked bootloader you must relock it first to flash ruu. Command for that: fastboot oem lock. After that you should be able to flash ruu.
Command fastboot oem writesecureflag 3 is for making S-on.
dont use that command with unsigned bootloaders or you'll brick your device!
c000ler said:
If you have unlocked bootloader you must relock it first to flash ruu. Command for that: fastboot oem lock. After that you should be able to flash ruu.
Command fastboot oem writesecureflag 3 is for making S-on.
Click to expand...
Click to collapse
But the device's bootloader is locked
jackebbe said:
But the device's bootloader is locked
Click to expand...
Click to collapse
man
hello all,
I recently got an htc wildfire(s-off from stock) but i want to unlock the bootloader but fastboot gives me an error whenever i type fastboot oem get_identifier_token .pls i dont know what to do. The RUU update keep failing i cant update the hboot, even my stock recovery was deleted now i dont even have recovery again:crying: