[Q] MTP-Initialization - AT&T Samsung Galaxy S II SGH-I777

Alright, here's the deal: my phone is saying it's connected to USB, but in reality, it's not. Is there a fix for this? It's not that much of a problem, because I can still connect to my computer, and all I have to do is hit the "Clear" button to make it go away, it's just a nuisance to have it up there.

Tell us about your phone. Rooted, what rom, what have you flashed/modified?
Sent from my páhhōniē

gr8hairy1 said:
Tell us about your phone. Rooted, what rom, what have you flashed/modified?
Sent from my páhhōniē
Click to expand...
Click to collapse
his sig shows
Samsung Galaxy S II (SGH-I777) w/ UnNamed

autonomous-inc said:
Alright, here's the deal: my phone is saying it's connected to USB, but in reality, it's not. Is there a fix for this? It's not that much of a problem, because I can still connect to my computer, and all I have to do is hit the "Clear" button to make it go away, it's just a nuisance to have it up there.
Click to expand...
Click to collapse
what if you toggle the USB Debugging mode, will it disappear? I know that sometimes the complete opposite happens to me where 'usb connected' doesnt appear when i plug in the phone. I have to turn off USB Debugging and turn it back on...then it works just fine.

My ROM is UnNamed 1.3.1, and my kernel is Entropy's newest (11/23).
I toggled my USB Debugging, thinking the same thing Dynasty. No bueno. To be more specific, this all started after I accidentally clicked "Download" on my phone's shutdown menu, and then clicked "Cancel" then clicked "Shutdown."
When I did that, my phone entered download mode, and I had to pull the battery out to turn it off. It's been actin' sorta screwy from that point on.

Try a reflash of unnamed without wipe. Won't lose any data/apps and might get the system working right.
I know it's a lazy way of fixing things but if it does work it's a really quick fix.
Sent from my páhhōniē

did this work? im getting the mtp thing as well

Nah. I never did. Most I can figure to be honest is the USB port is jacked, like many other SGS I177s. It never turns off, and I did pretty much everything from flashing a new kernel to a new ROM to wipe and flash to toggling many of the functions of the phone.
No bueno.
Sent from my SAMSUNG-SGH-I777 using xda premium

it worked for me, i also installed siyahs newest kernal

Related

[Q] No More USB Mode... Computer and Phone won't Recognize each other

My phone won't go into USB mode anymore. As in, once I plug it in, it starts charging and thats it. No USB or Debugging Notification pops up anymore and on my computer it says Unrecognized device.
Here's what I've tried:
Unintalling and reinstalling the drivers.
Rebooting phone & computer
Flashing from Macnut R1 to Bionix 1.9.1
Flashing different Kernals (can't do ODIN tho)
Tried different usb cables and ports
What should I do?
Any help will be GREATLY appreciated!!
did you go to settings>applications>USB settings> click "ask on connection"????
Sir Incognito said:
did you go to settings>applications>USB settings> click "ask on connection"????
Click to expand...
Click to collapse
I did. It was there on default. All the other options give me the same results
dav3wash said:
I did. It was there on default. All the other options give me the same results
Click to expand...
Click to collapse
Try toggling it off, then back on. That fixed mine (same problem a you after the JI6 update). I also had to toggle debug mode off and back on.
Sent from my SGH-T959 using XDA App
NJLaPrell said:
Try toggling it off, then back on. That fixed mine (same problem a you after the JI6 update). I also had to toggle debug mode off and back on.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
See, stuff like this only works after somebody tells you to do it. I swear I've been doing that for the past 24 hours, and that didn't work until you told me to ... thanks tho!
NJLaPrell said:
Try toggling it off, then back on. That fixed mine (same problem a you after the JI6 update). I also had to toggle debug mode off and back on.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Toggle what OFF/ON???
usb debug, and usb mode
systematic said:
usb debug, and usb mode
Click to expand...
Click to collapse
That does not work. I have tried mounting with and without debugging. I have also tried it either with Kies and mass storage. It still shows that I am connected, even thou I do not have the USB cable connected.

USB Debugging Issue

I just flashed Kenneth's 2.3.4 Beta 3 and can't get USB debugging to turn on. The check box is checked under settings > Applications > Development but no dice. Wanted to post this in the dev forums but have no permissions. Any ideas?
Are you using the usb port on the BACK of your computer? The ones in the front sometimes dont get enough juice to work the way we want them to.. Have you tried toggling the usb debugging tickbox while connected?
I am using a rear USB port and I have tried turning it on then off reboot turn it back on, pull battery, wipe data, etc. Still stuck. I saw a post regarding it under the 2.3.4 thread and that individual was able to fix it with a simple reboot. Im guessing that something is wrong in my file system. Im just going to try flashing 1.83 SBF and start over since not many people are experiencing it. That usually means its something I did
Ok went all the way back to stock 1.26, updated OTA all the way up to 1.83, rooted, installed CWM, Unlocked, installed 2.3.4 and still no USB debugging. Not really sure what is going on here.
Now also having my USB connection automatically changing to Motorola Phone Portal. I change it to something else, and it reverts it back within 30 seconds or so.
I just did the OTA and am having the same issue. No debug icon. If I use DDMS it shows up and I can see everything. But ADB doesn't seem to work either.
WiredPirate said:
Are you using the usb port on the BACK of your computer? The ones in the front sometimes dont get enough juice to work the way we want them to.. Have you tried toggling the usb debugging tickbox while connected?
Click to expand...
Click to collapse
Doesnt matter which USB ports you use to connect to your phone. He's not trying to charge it. And front or rear really doesn't matter if they are properly connected to your motherboard. Charging is affected by USB port type and USB cable.
Beamed from WinBorg 4G via XDA Premium

Cant connect to pc

After rooting my phone I havnt been able to connect my thunderbolt to my pc, I have HTC sync installed but nothing. It wont even say anything is connected but it will charge the phone. I have the connect to pc set to mount as drive... any help would be appreciated
Edit your signature so people dont always have to ask what ROM you are running but here we go what ROM are you running?
Make sure you are not paying so much attention to your computer and more to the phone. Depending on what ROM you are running if you connect it to the computer the phone will show a USB connected but you have to press a button to finish the connection (on the phone) it is usually a swipe down from task bar look for it, that is how it is on the ROM I am running A05PTH3ORY. Make sure to thank me if this help you.
bb4ninja said:
After rooting my phone I havnt been able to connect my thunderbolt to my pc, I have HTC sync installed but nothing. It wont even say anything is connected but it will charge the phone. I have the connect to pc set to mount as drive... any help would be appreciated
Click to expand...
Click to collapse
Im running gingeritis 3d right now. The phone only shows that its charging and nothing in the notification bar. This happened also when i was running other versions of bamf and uber bamf
Make sure all the UBS Debugging is still checked, my ROM told me to keep it checked or I would have problems. I have not tried to connect to the computer without it.
bb4ninja said:
Im running gingeritis 3d right now. The phone only shows that its charging and nothing in the notification bar. This happened also when i was running other versions of bamf and uber bamf
Click to expand...
Click to collapse
Put your phone into Internet Pass Through mode. After 30 seconds (or more, not less), put it back into Disk Drive mode.
Sent from my ADR6400L using XDA App
razor2006 said:
Put your phone into Internet Pass Through mode. After 30 seconds (or more, not less), put it back into Disk Drive mode.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Tried it and nothing
bb4ninja said:
Tried it and nothing
Click to expand...
Click to collapse
I saw that you have sync installed, but do you have the proper drivers installed on the computer that you're using?
Also, is it just sync that isn't connecting, or can you go to "My Computer" or the equivalent and see the SD card, or does it not show up there either?
Have you disabled or removed any of the system services?
bb4ninja said:
Im running gingeritis 3d right now. The phone only shows that its charging and nothing in the notification bar. This happened also when i was running other versions of bamf and uber bamf
Click to expand...
Click to collapse
There are SEVEN versions of Gingeritus3D v1.0 to date. The specific version is actually a rather critical issue since they're not all built on the same base or use the same kernels.

[Q] Phone crashing when plugged in to computer

UPDATE 3 I've run into my ultimate issues, when plugged in to install drivers, I get the error "device unplugged" but it's plugged in, charging. I have tried different ports on my PC, different cables, I don't know what to do at this point..
---------------------------------------
UPDATE 2 I've gotten the device to finally recognize as an MTP device, but it only stays connected for a short time, it disconnects after a few seconds, I've tried swapping cables already, as well. Any advice?
---------------------------------------
UPDATE Okay, I've solved the problem with the crashing, but now my phone shows as it isn't even connected at all. I've re-installed drivers, I am completely stumped atm.
----------------------------------------
Basically, I've been having this problem ever since I've flashed to 4.2.1/4.2.2 where my phone will crash when it's plugged into a computer for file management.
When plugged in via USB I get the typical prompt that says "USB Connected" & "Turn on USB storage"
With common sense, I choose to turn on USB Storage and I basically get the loading ring, and after some time my phone just freezes up, and I have to reset it using the volume rocker down + power.
I've flashed a different rom, wiped cache/dalvik, factory restore, wipe system, fix permissions, & just constantly trying to get it to connect.
Is there anyway I can make the phone automatically mount when plugged in? Like on 4.1.2, all you had to do was plug it in and you can easily drag and drop files? I'm not very fond of this turning on USB storage option.
bump? Really need to get this problem solved..
This send to be an issue with 4.2.1 I have the same issue. Freezing completely when transferring files.
Easy solution for me is the airdroid app from the market. Easily transfers over wifi to and from the phone.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Had same issue I fixed it by going to settings/storage then hitting the menu button and going to usb computer connection and selecting mtp there.
Sent from my SAMSUNG-SGH-I717 using xda premium
Bubbajoe40356 said:
This send to be an issue with 4.2.1 I have the same issue. Freezing completely when transferring files.
Easy solution for me is the airdroid app from the market. Easily transfers over wifi to and from the phone.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I'll probably check this out, thanks for the advice.
rquiett said:
Had same issue I fixed it by going to settings/storage then hitting the menu button and going to usb computer connection and selecting mtp there.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
I've tried that, but no luck on my end. Glad you're not having issues though.
lolTrout said:
I'll probably check this out, thanks for the advice.
I've tried that, but no luck on my end. Glad you're not having issues though.
Click to expand...
Click to collapse
You could give flappjaxxx's cm10.1 kang a go then. Its what I have been using and has some nice added little touches by him. And I was able to use my phone with my computer
rquiett said:
You could give flappjaxxx's cm10.1 kang a go then. Its what I have been using and has some nice added little touches by him. And I was able to use my phone with my computer
Click to expand...
Click to collapse
Bibby said the F word
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

[Q] Missing USB Options, Phone doesn't recognize USB

Hello,
I just upgraded from a Samsung Vibrant to a Samsung Galaxy s2. The phone is used but is stil in excellent working condition - so it seems.
I have been trying to transfer my old SMS, contacts, etc to the s2, and I have backed them up onto a xml file via the Super Backup app. However, it seems virtually impossible to get the xml file onto the s2 because the USB is not connecting the phone to my MacBook pro. When I plug it in, the phone charges, but nothing else happens. Nothing comes up on the drop down menu, and there are no USB options in the settings. There is no "Applications" menu, and no "USB Utilities" under Wireless & Network. The phone came with '4.1.2 jzo54k' if that helps at all. The phone does not show up as a device on my Macbook either. I have tried different ports, different cables, nothing. When I plug in my Vibrant which is running 2.2, the laptop recognizes it. Keis also doesn't recognize it.
Any advice on how to restore my USB functionality or how to transfer texts and contacts without it is greatly appreciated!!! Please let me know if I need to provide any additional info.
akujieze said:
Hello,
I just upgraded from a Samsung Vibrant to a Samsung Galaxy s2. The phone is used but is stil in excellent working condition - so it seems.
I have been trying to transfer my old SMS, contacts, etc to the s2, and I have backed them up onto a xml file via the Super Backup app. However, it seems virtually impossible to get the xml file onto the s2 because the USB is not connecting the phone to my MacBook pro. When I plug it in, the phone charges, but nothing else happens. Nothing comes up on the drop down menu, and there are no USB options in the settings. There is no "Applications" menu, and no "USB Utilities" under Wireless & Network. The phone came with '4.1.2 jzo54k' if that helps at all. The phone does not show up as a device on my Macbook either. I have tried different ports, different cables, nothing. When I plug in my Vibrant which is running 2.2, the laptop recognizes it. Keis also doesn't recognize it.
Any advice on how to restore my USB functionality or how to transfer texts and contacts without it is greatly appreciated!!! Please let me know if I need to provide any additional info.
Click to expand...
Click to collapse
First off are you sure you have the i777?
Sent from my Zanpakuto using Getsuga Tensho!
You probably want to return to stock. Since you are using a Mac you need to use heimdall. Here is a link to the post.
http://forum.xda-developers.com/showthread.php?t=1746181
Sent from my SGH-I777 using xda premium
Nick281051 said:
First off are you sure you have the i777?
Sent from my Zanpakuto using Getsuga Tensho!
Click to expand...
Click to collapse
Yes. Model Number: SGH-I777
Red_81 said:
You probably want to return to stock. Since you are using a Mac you need to use heimdall. Here is a link to the post.
http://forum.xda-developers.com/showthread.php?t=1746181
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Would I be able to do that without the USB? Because as it is, I can't transfer files or anything of the sort
I believe heimdall will take care of that. It does on a Windows system. I'm not sure about a Mac
Sent from my SGH-I777 using xda premium

Categories

Resources