I flashed a new Rom after ICS2 since it said it was fast but after I flashed with CWM5 the boot animation kept on repeating? I flashed it directly from ICS2 btw
I already said on op
install v2.2
Then install v2.3 directly without wipe any thing just install
nims11 said:
I already said on op
install v2.2
Then install v2.3 directly without wipe any thing just install
Click to expand...
Click to collapse
same thing happened. I wiped everything before i flashed 2.2 then I flashed 2.3
Gene Carlo Ramirez said:
same thing happened. I wiped everything before i flashed 2.2 then I flashed 2.3
Click to expand...
Click to collapse
After install v2.2 reboot
when booted successfully then install v2.3 directly without wipe any thing
Related
I'm pretty much a noob so i might miss a step in the process, so any help is much appreciated.
I have installed the custom rom from lite'ning, unfortunately I've performed a wipe data/factory format afterwards to do a clean install and now i cant get the rom to function again.. I have installed an original kernel (KE7) using Odin and than installing the lite'ning Rom. The phone gets stuck in a boot loop.. The Villian Rom does work, maybe someone could tell me what to do to have the lite'ning rom to work again.
Thanks!!!
Bastiaan01 said:
I'm pretty much a noob so i might miss a step in the process, so any help is much appreciated.
I have installed the custom rom from lite'ning, unfortunately I've performed a wipe data/factory format afterwards to do a clean install and now i cant get the rom to function again.. I have installed an original kernel (KE7) using Odin and than installing the lite'ning Rom. The phone gets stuck in a boot loop.. The Villian Rom does work, maybe someone could tell me what to do to have the lite'ning rom to work again.
Thanks!!!
Click to expand...
Click to collapse
1. wipe/reset
2. flash your stock rom with odin(probably ke7 from http://www.samfirmware.com/WEBPROTECT-i9100.htm)
3. wipe/reset
4. flash Lite'ning rom with odin
5. Profit!
Thanks so much! It works!!!!!
Bastiaan01 said:
Thanks so much! It works!!!!!
Click to expand...
Click to collapse
I'm glad i could help.
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
blindox said:
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
Click to expand...
Click to collapse
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
+1
That would be my guess, the recovery.
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
live4nyy said:
+1
That would be my guess, the recovery.
Click to expand...
Click to collapse
ltdanno360 said:
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Be sure to let us know if it worked in case anyone else with the same issue can find the answer much easier.
blindox said:
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
Click to expand...
Click to collapse
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
blindox said:
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Click to expand...
Click to collapse
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
hello my friend,
i just made the WIPE CACHE AND WIPE DALVIK CACHE and the install of the ROM.
When i saw the screen NEUTRINO I was happy, until the time the ''system loading" getting black out for a couple seconds and then come right back. I knew there was something wrong.
Now I will make the process again with the factory data reset and then i will post what happened
Thanks
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
Yes, romracer is recommended. It is the only recovery that is specifically developed for the Atrix 4G. You could also try the TRWP Recovery but romracer's recovery is proven to work well and recommended by most.
Glad everything worked out.
blindox said:
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
Click to expand...
Click to collapse
so i originally had the Resurrection remix but got the new rom and downloaded from the phone and deleted the cache and stuff but it freezes when it starts booting up.. what do i do please help im scared atm..
j.kim970 said:
so i originally had the Resurrection remix but got the new rom and downloaded from the phone and deleted the cache and stuff but it freezes when it starts booting up.. what do i do please help im scared atm..
Click to expand...
Click to collapse
well simply reflash the rom without any wipes from recovery and see
ps- if u had any other ver of rr rom (ICS) then u have to make a complete wipe so that RR JB wrks properly
j.kim970 said:
so i originally had the Resurrection remix but got the new rom and downloaded from the phone and deleted the cache and stuff but it freezes when it starts booting up.. what do i do please help im scared atm..
Click to expand...
Click to collapse
Which kernel are u using?
I ran into the same problem
I've ran ran into the same problem too, i forgot to do a data wipe and installed the rom with dream kernel. Now ,my phone is stuck on the RR boot animation for over 30 minutes and I cannot boot into clockwork mod recovery, I can boot into download mode but Odin doesn't detect my device so I cannot reflash :crying:
mark.r22 said:
I've ran ran into the same problem too, i forgot to do a data wipe and installed the rom with dream kernel. Now ,my phone is stuck on the RR boot animation for over 30 minutes and I cannot boot into clockwork mod recovery, I can boot into download mode but Odin doesn't detect my device so I cannot reflash :crying:
Click to expand...
Click to collapse
try removin kies(if installed) and also the drivers
and then reboot and try re installing the drivers and chk
Thank you very much neerajganga for the advice, now my phone is back up and running as it was before :good:
neerajganga said:
try removin kies(if installed) and also the drivers
and then reboot and try re installing the drivers and chk
Click to expand...
Click to collapse
I first installed CM 10 nightly, didn't really like it, so I thought about restoring my old backup and going back to stock ROM, but, when I booted the phone, the logo came up then it rebooted.
Then I flashed Xperia Ultimate HD 2.0.3, Installation went fine, but the logo stayed for like 5 seconds then it went into a black screen, kinda abit blue'er than black.
The LED light went light blue.
What should I do now?
Thanks.
Fixed!
Finally, I managed to fix it.
I did this:
Locked bootloader: http://forum.xda-developers.com/showthread.php?t=1134335
Unroot with Flashtool.
Flashed boot.img from CM10.
Flashed 562 Android build. (or something :s)
And then the phone booted up. :laugh:
After/Before restoring your Backup, did you flash the right kernel for the software version?
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
After/Before restoring your Backup, did you flash the right kernel for the software version?
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
I bet he didnt
mihahn said:
After/Before restoring your Backup, did you flash the right kernel for the software version?
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
I forgot. xD
Anyways the ROM I flashed is better than the stock ROM.
Thanks anyways.
Sadra.. said:
I forgot. xD
Anyways the ROM I flashed is better than the stock ROM.
Thanks anyways.
Click to expand...
Click to collapse
Just for your information:
If you want to flash a new rom, you have to flash a kernel that's compatible. So you do it like this:
1. Push rom zip (and gapps if needed) to sdcard
2. Boot in cwm and do a backup
3. Flash the new kernel (in the zip or if you can choose one, watch out: there are kernels for GINGERBREAD or ICECREAMSANDWICH and use the right one )
4. Boot in cwm
5. Wipe data/factory reset, wipe cache, advanced -> wipe dalvik cache
6. Install zip from sd card -> choose the zip
Reboot and you've got it
I have a sch-i500 that is rooted with cwm working.
I am very interested in running liquid smooth v 2.9 found here: http://forum.xda-developers.com/showthread.php?t=2245120
so I did a format, wiped the cache and davlik. when I installed the zip from external sd card the phone immediately gave me a screen for CWM v 6.0.3.3.
I can still navigate and restore old back ups but the phone does not go past the Samsung logo on the boot screen. Any advice is appreciated.
I was previously running stock 2.3.5 E09 if that helps
http://forum.xda-developers.com/showthread.php?t=1026746
seems to be the best way for me to recover from this (looks like I flashed a non voodoo rom without removing voodoo) but I am unable to get the phone into download mode with or without the battery in the phone.
please help......(update) Alright, I am a moron. needed to have a powered usb port. on my way to recovery. thanks for having all this great info in one place.
aircooledbusses said:
so I did a format, wiped the cache and davlik. when I installed the zip from external sd card the phone immediately gave me a screen for CWM v 6.0.3.3.
I can still navigate and restore old back ups but the phone does not go past the Samsung logo on the boot screen. Any advice is appreciated.
I was previously running stock 2.3.5 E09 if that helps
Click to expand...
Click to collapse
Oh so close.
When coming from 2.3.x ROM you will need to flash the rom (liquid: or other 4.2.x) you will need to flash 2 more times...
The 1st flash get you into the new recovery only,,, as you found out.
2nd flash will pop up with an error message about incompatible partition and telling you to re-flash again,,,
So 3rd flash actually installs your new ROM
Then install a current/compatible Google gapps
.
Enjoy
.
Thank you, I am getting closer.
still on the second and third flash of the rom I get a satus 7 error which I think is a bootloader issue.
I have flashed the GBbootloader.tar through odid to no avail and am following Section:4 How to flash any ICS 4.0.x & 4.x.x JellyBean based rom
http://forum.xda-developers.com/showthread.php?t=1238070
anythoughts?
aircooledbusses said:
Thank you, I am getting closer.
still on the second and third flash of the rom I get a satus 7 error which I think is a bootloader issue.
I have flashed the GBbootloader.tar through odid to no avail and am following Section:4 How to flash any ICS 4.0.x & 4.x.x JellyBean based rom
http://forum.xda-developers.com/showthread.php?t=1238070
anythoughts?
Click to expand...
Click to collapse
what does the error say besides status 7?
did you odin the CWM4 fixed for cm7 then install the ROM 3 times?
can you get a pic up for us to see?
just to be sure......using odin, I repartitioned with the pit, and flashed a E03 rom. rebooted the phone fine.
flashed the CWM4 fix for 7 and redid the GB bootloaders as well.
went into recovery and factory reset, wiped cache, and dalvik.
installed liquid-JB-v2.7-Official-fascinatemtd.zip this time first time took me directly to clockwork where I flashed again. prompted with install from sdcard complete. repeated and got same message.
factory reset, wipe, wipe and flashed gapps. Everything seems to have worked this time with the v2.7Official instead of 2.9. I will play with this for just a bit and probably try it again tonight with a fresh downloaded copy of v2.9. I really do appreciate your assistance and help and I would not have gotten this far without the forum.
update:
flawless installation of v2.9 since 2.7 was already installed. (installed via cloclwork mod recovery)
It was most likely an operator error that prevented me from installing 2.9 after E03. But I don't see the benefit of going back to recreate why it didn't work. Thanks again all is good and right.