So I am a student, and I'm always walking around with a backpack full of books. I want to carry my transformer and its dock with me so I can do some on the fly word processing between classes when I get a chance, but I'm worried about the weight of my books being pressed against the dock, being pressed against the tablet in the case.
So, does anyone know of a good, hard, case that will fit the dock and the tab? I looked through the sticky and didn't seem to find anything that wasn't discontinued (unless I missed it??).
Thanks a lot!
Regards
Smith
I have the same conditions in my bag due to my classes.. I don't use a hard case but these:
http://www.amazon.com/s/ref=nb_sb_s...oocase+super+bubble+neoprene+sleeve+case+10.1
work super good and are only like 15 bucks.. the bubbles on the inside are super cushiony.. I don't even worry when its in there.
That's dope! If I may ask, how do you situate your tab in your backpack? Front, back,? And do you face your screen to your keyboard dock or away?
smithisize said:
So I am a student, and I'm always walking around with a backpack full of books. I want to carry my transformer and its dock with me so I can do some on the fly word processing between classes when I get a chance, but I'm worried about the weight of my books being pressed against the dock, being pressed against the tablet in the case.
So, does anyone know of a good, hard, case that will fit the dock and the tab? I looked through the sticky and didn't seem to find anything that wasn't discontinued (unless I missed it??).
Thanks a lot!
Regards
Smith
Click to expand...
Click to collapse
I carry mine in my backpack with no issues. I wanted one that would encase the tablet AND the dock. In my opinion, this one is the most practical if you are almost always using the dock anyway.
Well, since I can't put a link in a reply yet; go to amazon and look up: "Poetic(TM) 2in1 Ultra Light Leather Case for ASUS Eee Pad Transformer"
Hope this helps!
http://www.amazon.com/HP-Tablet-Sleeve-Black-Trim/dp/B0033RSNPG/ref=dp_cp_ob_e_title_3
I use this for with the dock. There's also a more expensive blue one, I wish they had a green.. but I got the red because it's cheap and worth the cost!
I am using the malina case made for Mac Air 11. Fit perfectly.
http://www.walmart.com/ip/Targus-CityGear-Mini-for-iPad-Tablet-Netbook/16480776
I ran across this one at Walmart. Fits perfectly while docked or not, and is very well cushioned. It has a good amount of room, allowing me to carry my adapter, phone charger, Jambox, and ZaggSparq. For $25, it's a pretty good deal.
yes its very nice
Related
Has anyone found any decent cases or sleeves for this tablet yet?
It's dimensions are listed as 271x176x12.9mm, which makes it longer than the iPad, as well as longer and wider than the Xoom, so I imagine most cases for those devices will be too small (or it'll protrude through the opening.)
At the same time, lots of netbook cases are around, but they seem to extend by 1 or 2cm too far in each dimension. Closest appears to be the Belkin 10.2" cases on Amazon.
There's a comparison of sizes here:
http://www.sizeasy.com/page/size_co...om-vs-Samsung-Galaxy-Tab-10-1v-vs-Apple-iPad2
http://www.proporta.com/F02/PPF02P05.php?t_id=5653&t_mode=des
Looks like it might work - size wise it seems the transformer will fit.
For the moment I am going to keep my transformer in the case I used for my Asus EEE PC Netbook, just hope it fits!!!
I also contacted tuff luv as I adore their cases and have one for my Kindle and love the fact I can prop it up and read it. They say there going to look into it and to contact them again in a couple of weeks, I really hope they do a case.
I got on of these as a temporary measure. .
http://www.amazon.co.uk/AmazonBasic...1_6?s=computers&ie=UTF8&qid=1302631132&sr=1-6
Fits well enough, of somewhat unspectacular..
REALLY hoping Yoobao do a transformer version of their magic case.. have emailed them to enquire.. mebbe i enough of us register our interest.. Hint.. hint
I still haven't found a case :'( I'm using a net book neoprene case which is too big, do we need to consider the keyboard as well... might make it harder to get the case.
Sent from my Transformer TF101 using Tapatalk
Ive got one of these and it fits pretty well.
http://www.argos.co.uk/static/Product/partNumber/9295706.htm
I got one of these anticipating my Transformer but after getting it, I'm pretty sure it will be about .5 inch short.
www .amazon.com/AmazonBasics-Netbook-Handle-10-Inch-Netbooks/dp/B002VPE1Q6/ref=sr_1_1?ie=UTF8&qid=1302649243&sr=8-1
The Transformer is long and narrow unlike all other tablets.
I got my kindle sleeve from here..http://wrappers.typepad.com/
Very pleased with it...
If you email them with details they will advise which of their huge range will fit the Xformer. They are custom made.
I bought a cheap neoprene sleeve on ebay (item no 170625464579) for £3.30 delivered (although he has now hiked up his price to £4.95). It fits pretty much perfectly - although I did manage to accidentally wake the tablet up from standby putting it in the sleeve on one occasion.
andyfoster said:
I bought a cheap neoprene sleeve on ebay (item no 170625464579) for £3.30 delivered (although he has now hiked up his price to £4.95). It fits pretty much perfectly - although I did manage to accidentally wake the tablet up from standby putting it in the sleeve on one occasion.
Click to expand...
Click to collapse
Looks like this one on Amazon?
http://www.amazon.co.uk/A1CS-tablet...66/ref=sr_1_24?ie=UTF8&qid=1302711288&sr=8-24
Edit: blah, ignore - just noticed that's for 7" tablets.
steftymo said:
I got my kindle sleeve from here..http://wrappers.typepad.com/
Very pleased with it...
If you email them with details they will advise which of their huge range will fit the Xformer. They are custom made.
Click to expand...
Click to collapse
Wow, those look really nice. I'll email and see what they say.
Edit: Have just been emailing with the lady that makes them. She's confident she can make something up for it and is going to send me a sample. I'll keep you posted!
case
I just bit the bullet and ordered this one for now:
www.amazon.co.uk/exec/obidos/ASIN/B0045D88I4/ref=ox_ya_os_product
Size is 270x200x25 mm which is the closest I could get to the Transformer size. It should arrive in a couple of days and then I will report back.
rio
This looks like a perfect fit from the listed dimensions:
http://www.gearzap.com/pakuma-eco2bag-cocoon-10-netbook-sleeve-black-and-jasper-red.html
Anyone know the height of the keyboard? Don't want to buy a sleeve yet until I know both the tablet & keyboard are going to fit in it!
can we use the cases/sleeves for asus eee netbook? they are the same size of 10.1"..
leeharo said:
can we use the cases/sleeves for asus eee netbook? they are the same size of 10.1"..
Click to expand...
Click to collapse
maybe im not sure. but isnt the transformer 16:10? its pretty widescreen so itll be a little lengthy compared to netbooks i think. im not quite sure.
Today i went to my local PCWorld store and picked up a Samsonite 11" Notebook Case, it seems to fit quite well, but was £24.99 ....
http://www.pcworld.co.uk/gbuk/samsonite-aramon2-11-laptop-case-black-05318913-pdt.html
It is duel aspect, so when the keyboard part of the TF arrives it will also be used in this case, the tablet part fits in the top part of the case and is held in place by two corner holders.
bobcatuk said:
Today i went to my local PCWorld store and picked up a Samsonite 11" Notebook Case, it seems to fit quite well, but was £24.99 ....
http://www.pcworld.co.uk/gbuk/samsonite-aramon2-11-laptop-case-black-05318913-pdt.html
It is duel aspect, so when the keyboard part of the TF arrives it will also be used in this case, the tablet part fits in the top part of the case and is held in place by two corner holders.
Click to expand...
Click to collapse
Been there, done that. Unfortunately - as you'll soon notice - when it's done up the zip sits right on top of the power button, making it incredibly easy to turn on accidentally. I'm taking mine back tonight.
My sample "Wrapper", as linked above, arrived this morning and it's very nice indeed! Perhaps a little small width ways but I've sent my feedback and I think they're going to re-work it a little. Once they've got the final design down-tap I'd recommend them without hesitation.
Noiz said:
Been there, done that. Unfortunately - as you'll soon notice - when it's done up the zip sits right on top of the power button, making it incredibly easy to turn on accidentally. I'm taking mine back tonight.
Click to expand...
Click to collapse
I guess i can see what you mean about the zip, but im traveling around with work next week and wanted something quick to stop it getting battered in my laptop bag with everything else that is in there.
It will do for the moment until either an official case comes out or a good alternative is found, I will hold onto the receipt and packaging that came with it, if it turns on the power constantly when im away next week i will take it back.
The TeckNet iPad Leather Case for Apple iPad is exactly the type of thing I want, only designed for the eeePad!!!
I'd link you to the page on Amazon, but I've not posted enough on here yet to put up external links! (GRRR!)
I just got a transformer last week and I really don't like any of the folio cases available but want to have some kind of protection for when I throw it in my bag. So I was looking into sleeve cases on amazon but reading the reviews people were saying they didn't fit too well, having 1-2" of space so it moves around a lot. Are there any sleeves out there that are specifically made for the transformer or at least fit it decently?
Hmm, maybe I'm cheap but for that, I'd probably just pad it with a towel or a custom cut piece of foam.
Sent from my Transformer TF101 using Tapatalk
I have this one. Fit the TF perfectly + some pockets for accessories.
http://www.shopping.hp.com/webapp/s...aoid=20715&ci_src=14110944&ci_sku=QB459AA#ABL
the asus transformer is 27.1cm by 17.7cm I believe and surprisingly when I was looking for cheaper opinions on ebay it was the cheap as chips option that seemed to be sized as best 'fitted' for the asus's dimensions (in my opinion at least)
http://www.ebay.co.uk/itm/150672438...X:IT&_trksid=p3984.m1438.l2649#ht_3393wt_1085
I suppose if it works for what a person needs it for don't knock the 'cheap as chips' ness factor of it!
apple85 said:
the asus transformer is 27.1cm by 17.7cm I believe and surprisingly when I was looking for cheaper opinions on ebay it was the cheap as chips option that seemed to be sized as best 'fitted' for the asus's dimensions (in my opinion at least)
http://www.ebay.co.uk/itm/150672438...X:IT&_trksid=p3984.m1438.l2649#ht_3393wt_1085
I suppose if it works for what a person needs it for don't knock the 'cheap as chips' ness factor of it!
Click to expand...
Click to collapse
That's exactly what I was looking for, you have that case then?
I bought this one. Fits perfectly. Adds a zipper side pocket for the charger. Handles have velcro to keep the together. Has 2 plastic pouches inside made for SD cards. The handles come in handy if carrying other things.
http://www.ebay.com/itm/Black-Neopr...ltDomain_0&hash=item4cfbac6575#ht_1902wt_1189
Plus it is super cheap. The quality is about 8/10 as the zippers are just a little tough. For the price it can't be beat.
@ FlyingToilets - yes, I've just bought that one as extra extra protection - you can't really going too wrong with something that costs 2 quid
I've also bought this one as a main case (http://www.yourpoetic.com/android-t.../black-slimbook-asus-eee-cases-and-covers.asp) for about £13 at amazon as the main case (the other case I plan to house the asus+portfolio case and a stylus)
I really wanted to get this one (http://www.yourpoetic.com/android-t...ducts/black-red-asus-eee-cases-and-covers.asp) but it is a bit too much in the uk currently
I've only just ordered these so I don't know how good they will be but I'll try and let you know when they arrive!
I got this one for my Transformer and I love it!
Blurex (cant post links yet), just google blurex asus transformer case
Its slim, fits nicely, and feels great. It also lets me easily attach the keyboard while its open, but its not quite large enough to close around while the keyboard is attached and closed, which I don't really mind.
I just picked up a Transformer on Friday night, so just wanted something cheap for the time being to carry it in. There was a sleeve in the Best Buy ad today so I decided to pick one up. I'm very happy with it for $6.
I can't post links yet, but either look at the BB ad or search their website for "HP sleeve" and you'll find it.
I bought that el-cheapo ebay case.
1) Fit - it fits the transformer very well indeed. The long dimension is just right, absolutely would not want to be any less as it's a bit tight to flip the lid on. The short dimension is just fractionally more than would be a really tight fit, but it's so close that you really could regard it as made for the transformer (tab only, I doubt it would fit with the dock).
2) Finish - not so great. Seriously, what do you expect for the price? Within about 3 days some stitching gave way on the red piping , leaving it coming loose from the neoprene. I have repaired it by hand as at the price it really is not worth arguing it out with the seller.
3) Both of the above combine to mean that you need to be careful putting the case on and taking it off your tablet, as it's easy to pull the lid too hard and potentially break some stitching as you stretch the lid over the end of the tablet.
Overall... I am looking for a messenger bag style case for my transformer (and not liking anything I've seen except a couple of crumplers that, as much as I love their products, I am not prepared to pay for. In the meantime, this sleeve provides excellent value for my tablet around the living room and in my laptop bag.
http://www.amazon.com/gp/product/B00565T3ZW/ref=oh_o00_s00_i00_details
I am got this one here and I have been very happy with it. It fits perfectly and allows me to stand it up at an angle.
http://www.amazon.co.uk/dp/B005HI4FPG
does anyone have this case? from what I can tell, the tab goes one side, the keyboard dock the other and it's a hard shell carry case.
however, nowhere to put your cables.
does anyone know of a similar case to this but with an pouch as well for cables? I know it's a TF101 case, b ut considering the prime is a small item it will fit this case easy.
I am looking at this case as well as I read about the reviews on the office transleeve having all the problems with the tablet and the lack of availability online. From the pictures on amazon it seems that its quite thin to carry around. I read a review somewhere maybe from it official website saying that this can carry a dock with the transformer so i assume this is okay.
i have this case! it fits very well and you dont even have to take the prime out of the dock. also, it is a hard case, so it protects much better against falls etc.
on amazon germany it was available immediately
js931 said:
i have this case! it fits very well and you dont even have to take the prime out of the dock. also, it is a hard case, so it protects much better against falls etc.
on amazon germany it was available immediately
Click to expand...
Click to collapse
Thanks for the info! just a quick question, since the tablet is very thin and so once you put the prime into the case does it get really fat or huge to hold with one hand?
air-wave said:
Thanks for the info! just a quick question, since the tablet is very thin and so once you put the prime into the case does it get really fat or huge to hold with one hand?
Click to expand...
Click to collapse
of course its thicker, its not a neoprene sleeve. but thats why it protects well and you can still easily carry it with one hand! i really like it. didnt expect much for the price and was pleasantly surprised!
i also ordered a 10'' netbook case from case logic to compare, but the prime has too much room in it and its more of a thin neoprene, so its just scratch-protection...
I bought this hard case:
eBay - The UK's Online Marketplace
Internal dimensions now that I have it in my hand are:
Case: 26.8cm x 19.1cm x 3-4cm
Prime: 26.3cm x 18.1cm x 2cm
As you can see, it's a pretty close fit in theory. Have to wait 5 days before I get my Prime to confirm it's a good fit.
Alternatives to consider
Hey guys,
just like everyone else, looking for a proper case for my prime
since eventually (in the near future) I plan on getting the Dock, i'm looking for a case/sleeve
- looked at all the cased and couldn't find one I liked
- Finally found a case, but haven't had a chance to try it yet
it's the HP VX403AA / VX404AA it's a mini neoprene sleeve for the HP Mini netbook
- price is 32$ as low as I could find it. pricey but nice
- Has 2 smaller pockets on one side and a big one on the other side
- Plenty of storage to keep the charging cable/charger/micro USB with the tablet wherever you go.
- I'll let you know how it fits as soon as I try it, you can find it in local BestBuy's so if any1 is interested in trying it out before I get to it, by all means post your results.
Thank you,
Rodi
lancer3397 said:
however, nowhere to put your cables.
Click to expand...
Click to collapse
It looks like there is a pocket on the inside of the cover.
I ordered this iGadgitz case. Hope to get it next week. I will post some pictures when I have it.
I have recently purchased the envelope neoprene case by built. They sell several different versions but I bought the 9-10" net book version and the transformer prime with dock attached fits like they were made for each other. It also has a front pocket for your charge cables and charger.
Sent from my DROID RAZR using Forum Runner
UrbanDroid said:
I have recently purchased the envelope neoprene case by built. They sell several different versions but I bought the 9-10" net book version and the transformer prime with dock attached fits like they were made for each other. It also has a front pocket for your charge cables and charger.
Sent from my DROID RAZR using Forum Runner
Click to expand...
Click to collapse
Could you post a link?
This is a great case, my prime and dock lives in it when I'm not using it. It fits snug and feels well protected. There is a mesh Pocket inside which I justuse to keep the screen cloth, but you could easily fit a USB cable in.
Sent from my Transformer Prime TF201 using Tapatalk
This thing: http://www.amazon.com/dp/B0046SNNRY/.
I have a rooCase coming in next week, but I'm looking for something else for extra padding when I'm traveling and to carry accessories with the tablet.
It looks like this Targus bag should be about the right size, but I was wanting to make sure.
Yes I have one. I got mine at target for around 24 bucks. It is a perfect fit. I imagine the keyboard will fit in the other compartment perfectly but i have no keyboard.
The inside pocket might seem to small but it is very soft and it doesn't take long to stretch making a very snug fit.
It holds my prime and 2 chargers. I don't have a need to carry more but there is room for it.
I 100% recommend this bag.
Yeah, I saw it at Target a couple of hours ago for that price, which is why I asked. Thanks for the review!
I have it as well and second the perfect fit. When the dock is attached to the tablet it fits next to the inside pocket. When their separate, the tablet fits in the pocket and the dock fits right next to it. The padding is soft and not excessive. I included some pics for you. There's also room for the charger in the outside pocket and of course a cloth for the fingerprints.
I also paid 24.00 at Target but couldn't find online for that price. I 100% recommend
I almost bought it several times in the month ( felt like months) wile my prime was preordered. Then my wife bought me one for Christmas though I still had a bit of a wait. It is perfect for travel. It feels like it was made for the prime.
I picked up this at Best buy. Had some rewards points that needed to be used
http://www.amazon.com/Targus-CityGe...1?s=aps&ie=UTF8&qid=1326572391&sr=1-1-catcorr
It fits it well and it has the two compartments which fit it nicely if I detach the keyboard they can both be separated and protected if I choose or it fits fine as one piece. It has extra pockets on the inside for my mouse, cables and charger.
copc said:
I picked up this at Best buy. Had some rewards points that needed to be used
http://www.amazon.com/Targus-CityGe...1?s=aps&ie=UTF8&qid=1326572391&sr=1-1-catcorr
It fits it well and it has the two compartments which fit it nicely if I detach the keyboard they can both be separated and protected if I choose or it fits fine as one piece. It has extra pockets on the inside for my mouse, cables and charger.
Click to expand...
Click to collapse
I got this one. It looks exactly the same but the two compartments are supposedly a little bigger than the one you posted. Yours is the TSM148US while mine is the TSM097US. It's a little cheaper too.
http://www.amazon.com/gp/product/B002N8726W/ref=oh_o00_s00_i00_details
Check out this review:
Perfect for my ASUS Eee Pad Transformer and its keyboard dock, June 8, 2011
By L. Paquin (San Francisco, CA USA) - See all my reviews
(REAL NAME)
This review is from: Targus CityGear Netbook Case for up to 10.2 Inch Netbooks- Black and Grey TSM097CA (Personal Computers)
I have been looking around to find a good mean to carry my ASUS Eee Pad Transformer tablet around and its Keyboard/Docking Station but not necessarily always docked. Most netbook carrying bag only have one padded compartment to put the netbook. I was looking for one which had two sections so that I can leave them undocked to quickly pull the tablet alone quickly (as opposed to pull the docked tablet, undock and then put the keyboard back in the bag).
Last weekend, I brought my Transformer and the keyboard dock and went shopping around for that perfect bag. I found the Targus CityGear Mini (TSM148US) and tried it. The form factor was definitively what I was looking for but one of sub-sections was a little tight. I still decided that it would work for me and that it might strech a little over time. Then, when I looked on Amazon, I saw that there was this model, the Targus CityGear Netbook Case for up to 10.2 Inch Netbooks (TSM097US), which had pretty much the same specs but was cheaper (always a good thing). So, I decided to try it.
I received today and quickly opened it. It is pretty much the same as the one I tried last weekend but the two sub-compartments are bigger. So, no need to strech them and they work out of the box. It is a great way to carry my tablet docked or not to the keyboard. The side pockets of the bag also offer enouch space to carry the charger (it is pretty small anyway) and also my Arkon Portable Fold-Up Stand (great stand for this tablet BTW).
So, all-in-all, I highly recommend this tablet. I had been searching for recommendations for the ASUS Eee Pad Transformer and did not find anything that stroke me. This is why I thought of writting this detailed review (and I will post pictures) for my fellow Transformer owners!
Click to expand...
Click to collapse
This case looks pretty cool. How much storage space is there in the other slot? Is it enough to carry say a mouse, charger, and sixaxis?
I bought this one.
amazon.com/gp/product/B002STX2ZG/ref=oh_o02_s00_i00_details
(Can't post links yet)
It works for the most part just will for a little more pocket space in the other spots.
Hey guys I have been searching for a long time now for a folio style case that will fit the transformer WHILE docked. Searching here found me nothing.
I have only EVER found two (on amazon) that fit exactly what i am looking for but they have had mixed reviews.
I was just wondering if anyone else has seen anything like or has any experience with the following cases:
This one has a removable section for the keyboard dock which clips on to the main tablet case (which has its own cover for when not using it with the dock)
http://www.amazon.com/ASUS-Transformer-KeyBoard-Portfolio-MiniSuit/dp/B005JFIS50/ref=lh_ni_t
This one is a single piece built for use with the dock all the time.
http://www.amazon.com/Asus-Transformer-Keyboard-Docking-Black/dp/B005GR0YUI/ref=lh_ni_t
Thanks in advance guys.
I bought this one from amazon, and I love it.
http://www.amazon.com/gp/product/B006MVUQGY/ref=oh_o00_s00_i00_details
BULL3TPR00F said:
Hey guys I have been searching for a long time now for a folio style case that will fit the transformer WHILE docked. Searching here found me nothing.
I have only EVER found two (on amazon) that fit exactly what i am looking for but they have had mixed reviews.
I was just wondering if anyone else has seen anything like or has any experience with the following cases:
This one has a removable section for the keyboard dock which clips on to the main tablet case (which has its own cover for when not using it with the dock)
http://www.amazon.com/ASUS-Transformer-KeyBoard-Portfolio-MiniSuit/dp/B005JFIS50/ref=lh_ni_t
This one is a single piece built for use with the dock all the time.
http://www.amazon.com/Asus-Transformer-Keyboard-Docking-Black/dp/B005GR0YUI/ref=lh_ni_t
Thanks in advance guys.
Click to expand...
Click to collapse
dougstoner said:
I bought this one from amazon, and I love it.
http://www.amazon.com/gp/product/B006MVUQGY/ref=oh_o00_s00_i00_details
Click to expand...
Click to collapse
is it a problem to use this case *without* the dock as well? i like to hold the tablet to read comics etc alot without the keyboard in the way
pyro224 said:
is it a problem to use this case *without* the dock as well? i like to hold the tablet to read comics etc alot without the keyboard in the way
Click to expand...
Click to collapse
Yes and no. without the keyboard in, there is nothing to keep it from sliding out the bottom, but you can hold it. I'll upload a pix when I get home from work showing it if you want. Kind of hard to explain.
Sent from my PG86100 using xda premium
Thats why i was leaning more towards the one with the removable part for the keyboard (the first one i linked to).
That way you can use it with and without the keyboard and still be fully covered.
personally i find all these cases aesthetically horrible, i really dont want huge triangular bits of leather on the keyboard corners and the leather around the screen it just makes what is a beautiful tablet look like something out of miami vice!
but maybe thats just me.
LOL i do agree with it taking away from the beauty of the tablet, but im not a fan of sleeves and need something that i can keep on it at all times or whenever i need it. There are so many nicer ones (i.e the official transformer folio, looks smiliar to the ones made for ipads), but they are made for the tablet alone and must be removed to dock it, which sucks.
BULL3TPR00F said:
LOL i do agree with it taking away from the beauty of the tablet, but im not a fan of sleeves and need something that i can keep on it at all times or whenever i need it. There are so many nicer ones (i.e the official transformer folio, looks smiliar to the ones made for ipads), but they are made for the tablet alone and must be removed to dock it, which sucks.
Click to expand...
Click to collapse
try the blurex case, its the best i have found, you can charge it with the case on and use the dock with the case on, you just cant fold it fully closed.
Link please?
BULL3TPR00F said:
Link please?
Click to expand...
Click to collapse
http://www.amazon.com/BLUREX-Leather-folio-Multi-Angle-Transformer/dp/B005ESY8VA
like i said you cant close the case completely with the dock attached, but when i am out and about i just detach the dock from the tablet and put the whole caboodle in this:
http://www.amazon.co.uk/Protective-...EC/ref=sr_1_32?ie=UTF8&qid=1327364719&sr=8-32
Yeah i remember seeing that blurex one and loved it because it doesnt have a bezel it has less noticeable clips which shows off the transformer much better. How is the hold though? how exactly does it work?
But yeah im not a fan of sleeves. so that would be out of the question for me (although it seems like thats the only option sometimes)
BULL3TPR00F said:
Yeah i remember seeing that blurex one and loved it because it doesnt have a bezel it has less noticeable clips which shows off the transformer much better. How is the hold though? how exactly does it work?
But yeah im not a fan of sleeves. so that would be out of the question for me (although it seems like thats the only option sometimes)
Click to expand...
Click to collapse
you slide the tab in under the clips.holds it perfectly you don't even notice the tabs are there.its perfect!
Sent from my GT-I9100 using XDA App
I'm in the same boat
Yeah, BULL3TPR00F, I'm in the same boat in terms of what I want.
I'm not sure if its possible though, you'd think at least Asus would have put something together that did the job otherwise (let alone all the custom makers).
I think that blurex looks like it might be the best of average solutions to the problem. One thing I am concerned with is are the clips gonna eventually loosen/break if I'm constantly switching the tab between the dock and case?
bob dylan, do you have an opinion on that?
wafflestheclown said:
Yeah, BULL3TPR00F, I'm in the same boat in terms of what I want.
I'm not sure if its possible though, you'd think at least Asus would have put something together that did the job otherwise (let alone all the custom makers).
I think that blurex looks like it might be the best of average solutions to the problem. One thing I am concerned with is are the clips gonna eventually loosen/break if I'm constantly switching the tab between the dock and case?
bob dylan, do you have an opinion on that?
Click to expand...
Click to collapse
i very much doubt the clips would break, i dont know what they are made out of but they are sturdy as hell, i cant bend them at all when i press on them or try and twist them( maybe some kind of metal skeleton underneath? dunno). this case is very well made indeed, the clips do not leave any mark on the tablet at all.
---------- Post added at 04:37 PM ---------- Previous post was at 04:30 PM ----------
just to clarify, with the blurex case i dont ever take the case off when using the keyboard dock. the case is fine with the dock as the back of the case just folds up behind the tab when the dock is connected and the keyboard is being used flat on a surface.
the only draw back to this case is that it doesnt close fully when the keboard is attached, you can close the tablet and the dock the usual way you just cant close the case fully. so for me i dont have a scenario where i need to take the case off.
when i want the tablet on its own i just take off the dock
when i want the dock attached i attach it and fold the back of the case up behind the tablet
when i want both and i am out and about i take the dock off and put the cased tablet and dock in a neoprene sleeve.
I ordered the same Minisuit case you linked originally, with the removable dock part.
In theory I think this fits my use case best. I have a toddler, and also toss it in my computer bag, so I wanted it protected/always covered, if it is docked or not.
I do really like the case. Its seems OK quality for $30. Having the ability to undock it and carry around just the tablet is great. I found that I was carrying around both the dock and the tablet often because I was worried about something scratching the screen. So Now, I carry just the tablet around with me much of the time, with the folio case protecting the screen.
Typing with the dock/tablet sitting in my lap is much better with the case on. It makes the base less rounded, so it is less enclined to tilt forward in my lap. Plus the corners of the case raise my wrists up off the keyboard slightly, which makes it feel more comfortable.
The case seems to be a little fiddly though.
The hole for the camera on the back sometimes gets in the way of shots.
It sometimes the tablet doesn't want to connect to the dock without undoing the elastic bands that keep the cover secured to the dock. I've just started leaving those un-done, since even if it connects, it seems to limit the tilt angle. And the elastic strap sometimes covers the charging light on the dock. And that works mostly ok. The snaps on the back sometimes are hard to work as well.
Thanks for the detailed description, you mind uploading some pics from various angles and what you were mentioning about the straps and whatnot.
Thanks!
BULL3TPR00F said:
Thanks for the detailed description, you mind uploading some pics from various angles and what you were mentioning about the straps and whatnot.
Thanks!
Click to expand...
Click to collapse
Before I bought it, I stumbled on this review. Check out the 5th image here (also a decent review, lots of pictures)
http://www.transformerforums.com/forum/asus-transformer-accessories/6182-minisuit-folio-case-review-tuff-luv-clone.html
You can see the elastic strap that keeps the underside of the case attached to the dock. Scroll a bit further down, and you can see the picture of the two attached together. The reviewer didn't seem to have any problems with the straps. I can make it work ok with them on, but it just seems to make docking a bit harder...and it definitely seems that they get pinched when reclining the screen back fully.
But they're not really needed. If you have the two pieces snapped together, the snaps hold the base piece in place. Really what the straps do is to keep the case from falling off the dock when the transformer isn't docked. And you could put the straps back on in that case...
Cool thanks
I own a real Tuff-Luv case and really like it. Worth what I paid even if that's about double what that clone costs. It does add some bulk.
Sent from my Transformer TF101 using Xparent Purple Tapatalk
Yeah i decided to splurge and grab the real Tuff-Luv case off amazon (Veggie leather, never seen the genuine leather anywhere aside from the official site). It is quite expensive but i do believe the build quality will be better than the knockoffs (also the MiniSuit knockoff does not have a cutout for the left speaker, and ive heard of minor issues with alignment of the holes (for cameras, etc).
when it arrives in a couple weeks, i will post pictures.
for now:
http://www.youtube.com/watch?v=cqWySeVbdCg
and
http://www.youtube.com/watch?v=h_0AyI1JBg4