Hey guys I have been searching for a long time now for a folio style case that will fit the transformer WHILE docked. Searching here found me nothing.
I have only EVER found two (on amazon) that fit exactly what i am looking for but they have had mixed reviews.
I was just wondering if anyone else has seen anything like or has any experience with the following cases:
This one has a removable section for the keyboard dock which clips on to the main tablet case (which has its own cover for when not using it with the dock)
http://www.amazon.com/ASUS-Transformer-KeyBoard-Portfolio-MiniSuit/dp/B005JFIS50/ref=lh_ni_t
This one is a single piece built for use with the dock all the time.
http://www.amazon.com/Asus-Transformer-Keyboard-Docking-Black/dp/B005GR0YUI/ref=lh_ni_t
Thanks in advance guys.
I bought this one from amazon, and I love it.
http://www.amazon.com/gp/product/B006MVUQGY/ref=oh_o00_s00_i00_details
BULL3TPR00F said:
Hey guys I have been searching for a long time now for a folio style case that will fit the transformer WHILE docked. Searching here found me nothing.
I have only EVER found two (on amazon) that fit exactly what i am looking for but they have had mixed reviews.
I was just wondering if anyone else has seen anything like or has any experience with the following cases:
This one has a removable section for the keyboard dock which clips on to the main tablet case (which has its own cover for when not using it with the dock)
http://www.amazon.com/ASUS-Transformer-KeyBoard-Portfolio-MiniSuit/dp/B005JFIS50/ref=lh_ni_t
This one is a single piece built for use with the dock all the time.
http://www.amazon.com/Asus-Transformer-Keyboard-Docking-Black/dp/B005GR0YUI/ref=lh_ni_t
Thanks in advance guys.
Click to expand...
Click to collapse
dougstoner said:
I bought this one from amazon, and I love it.
http://www.amazon.com/gp/product/B006MVUQGY/ref=oh_o00_s00_i00_details
Click to expand...
Click to collapse
is it a problem to use this case *without* the dock as well? i like to hold the tablet to read comics etc alot without the keyboard in the way
pyro224 said:
is it a problem to use this case *without* the dock as well? i like to hold the tablet to read comics etc alot without the keyboard in the way
Click to expand...
Click to collapse
Yes and no. without the keyboard in, there is nothing to keep it from sliding out the bottom, but you can hold it. I'll upload a pix when I get home from work showing it if you want. Kind of hard to explain.
Sent from my PG86100 using xda premium
Thats why i was leaning more towards the one with the removable part for the keyboard (the first one i linked to).
That way you can use it with and without the keyboard and still be fully covered.
personally i find all these cases aesthetically horrible, i really dont want huge triangular bits of leather on the keyboard corners and the leather around the screen it just makes what is a beautiful tablet look like something out of miami vice!
but maybe thats just me.
LOL i do agree with it taking away from the beauty of the tablet, but im not a fan of sleeves and need something that i can keep on it at all times or whenever i need it. There are so many nicer ones (i.e the official transformer folio, looks smiliar to the ones made for ipads), but they are made for the tablet alone and must be removed to dock it, which sucks.
BULL3TPR00F said:
LOL i do agree with it taking away from the beauty of the tablet, but im not a fan of sleeves and need something that i can keep on it at all times or whenever i need it. There are so many nicer ones (i.e the official transformer folio, looks smiliar to the ones made for ipads), but they are made for the tablet alone and must be removed to dock it, which sucks.
Click to expand...
Click to collapse
try the blurex case, its the best i have found, you can charge it with the case on and use the dock with the case on, you just cant fold it fully closed.
Link please?
BULL3TPR00F said:
Link please?
Click to expand...
Click to collapse
http://www.amazon.com/BLUREX-Leather-folio-Multi-Angle-Transformer/dp/B005ESY8VA
like i said you cant close the case completely with the dock attached, but when i am out and about i just detach the dock from the tablet and put the whole caboodle in this:
http://www.amazon.co.uk/Protective-...EC/ref=sr_1_32?ie=UTF8&qid=1327364719&sr=8-32
Yeah i remember seeing that blurex one and loved it because it doesnt have a bezel it has less noticeable clips which shows off the transformer much better. How is the hold though? how exactly does it work?
But yeah im not a fan of sleeves. so that would be out of the question for me (although it seems like thats the only option sometimes)
BULL3TPR00F said:
Yeah i remember seeing that blurex one and loved it because it doesnt have a bezel it has less noticeable clips which shows off the transformer much better. How is the hold though? how exactly does it work?
But yeah im not a fan of sleeves. so that would be out of the question for me (although it seems like thats the only option sometimes)
Click to expand...
Click to collapse
you slide the tab in under the clips.holds it perfectly you don't even notice the tabs are there.its perfect!
Sent from my GT-I9100 using XDA App
I'm in the same boat
Yeah, BULL3TPR00F, I'm in the same boat in terms of what I want.
I'm not sure if its possible though, you'd think at least Asus would have put something together that did the job otherwise (let alone all the custom makers).
I think that blurex looks like it might be the best of average solutions to the problem. One thing I am concerned with is are the clips gonna eventually loosen/break if I'm constantly switching the tab between the dock and case?
bob dylan, do you have an opinion on that?
wafflestheclown said:
Yeah, BULL3TPR00F, I'm in the same boat in terms of what I want.
I'm not sure if its possible though, you'd think at least Asus would have put something together that did the job otherwise (let alone all the custom makers).
I think that blurex looks like it might be the best of average solutions to the problem. One thing I am concerned with is are the clips gonna eventually loosen/break if I'm constantly switching the tab between the dock and case?
bob dylan, do you have an opinion on that?
Click to expand...
Click to collapse
i very much doubt the clips would break, i dont know what they are made out of but they are sturdy as hell, i cant bend them at all when i press on them or try and twist them( maybe some kind of metal skeleton underneath? dunno). this case is very well made indeed, the clips do not leave any mark on the tablet at all.
---------- Post added at 04:37 PM ---------- Previous post was at 04:30 PM ----------
just to clarify, with the blurex case i dont ever take the case off when using the keyboard dock. the case is fine with the dock as the back of the case just folds up behind the tab when the dock is connected and the keyboard is being used flat on a surface.
the only draw back to this case is that it doesnt close fully when the keboard is attached, you can close the tablet and the dock the usual way you just cant close the case fully. so for me i dont have a scenario where i need to take the case off.
when i want the tablet on its own i just take off the dock
when i want the dock attached i attach it and fold the back of the case up behind the tablet
when i want both and i am out and about i take the dock off and put the cased tablet and dock in a neoprene sleeve.
I ordered the same Minisuit case you linked originally, with the removable dock part.
In theory I think this fits my use case best. I have a toddler, and also toss it in my computer bag, so I wanted it protected/always covered, if it is docked or not.
I do really like the case. Its seems OK quality for $30. Having the ability to undock it and carry around just the tablet is great. I found that I was carrying around both the dock and the tablet often because I was worried about something scratching the screen. So Now, I carry just the tablet around with me much of the time, with the folio case protecting the screen.
Typing with the dock/tablet sitting in my lap is much better with the case on. It makes the base less rounded, so it is less enclined to tilt forward in my lap. Plus the corners of the case raise my wrists up off the keyboard slightly, which makes it feel more comfortable.
The case seems to be a little fiddly though.
The hole for the camera on the back sometimes gets in the way of shots.
It sometimes the tablet doesn't want to connect to the dock without undoing the elastic bands that keep the cover secured to the dock. I've just started leaving those un-done, since even if it connects, it seems to limit the tilt angle. And the elastic strap sometimes covers the charging light on the dock. And that works mostly ok. The snaps on the back sometimes are hard to work as well.
Thanks for the detailed description, you mind uploading some pics from various angles and what you were mentioning about the straps and whatnot.
Thanks!
BULL3TPR00F said:
Thanks for the detailed description, you mind uploading some pics from various angles and what you were mentioning about the straps and whatnot.
Thanks!
Click to expand...
Click to collapse
Before I bought it, I stumbled on this review. Check out the 5th image here (also a decent review, lots of pictures)
http://www.transformerforums.com/forum/asus-transformer-accessories/6182-minisuit-folio-case-review-tuff-luv-clone.html
You can see the elastic strap that keeps the underside of the case attached to the dock. Scroll a bit further down, and you can see the picture of the two attached together. The reviewer didn't seem to have any problems with the straps. I can make it work ok with them on, but it just seems to make docking a bit harder...and it definitely seems that they get pinched when reclining the screen back fully.
But they're not really needed. If you have the two pieces snapped together, the snaps hold the base piece in place. Really what the straps do is to keep the case from falling off the dock when the transformer isn't docked. And you could put the straps back on in that case...
Cool thanks
I own a real Tuff-Luv case and really like it. Worth what I paid even if that's about double what that clone costs. It does add some bulk.
Sent from my Transformer TF101 using Xparent Purple Tapatalk
Yeah i decided to splurge and grab the real Tuff-Luv case off amazon (Veggie leather, never seen the genuine leather anywhere aside from the official site). It is quite expensive but i do believe the build quality will be better than the knockoffs (also the MiniSuit knockoff does not have a cutout for the left speaker, and ive heard of minor issues with alignment of the holes (for cameras, etc).
when it arrives in a couple weeks, i will post pictures.
for now:
http://www.youtube.com/watch?v=cqWySeVbdCg
and
http://www.youtube.com/watch?v=h_0AyI1JBg4
Related
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250789197947#ht_3153wt_1139
Seems like a great price. Not sure if it fits the GTablet exactly, but turns out this guy is based like 5min from my house, so I can always return it to him if its not good.
Anyone have any opinions on this?
you could always "ask a question" to get the dimensions. I'd be afraid that it will stick out the sides
Almost definitely not actual leather (I hate deceptive descriptions) and there doesn't seem to be any visible way to actually ATTACH the tablet to the thing. Horrible picture details, and it is highly unlikely a single case could hold (well) a 7/8/10 inch tablet PC like the seller says.
I would pass on that one. Just go to electroniccrap.com or look for listings here for the ones MADE for the G-tablet.
Dishe said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250789197947#ht_3153wt_1139
Seems like a great price. Not sure if it fits the GTablet exactly, but turns out this guy is based like 5min from my house, so I can always return it to him if its not good.
Anyone have any opinions on this?
Click to expand...
Click to collapse
There seem to be 2 clips on the bottom and 1 on the top to hold it. Most cases come with 1 (or 2 ) more clips on the side. Without this there is a chance of the tablet sliding out through the sides. Although once you have side tabs you have to be careful that they dont block the usb port.
Also you *have* to check the dimensions
I have a
http://witglobal.com/goods-2286-10i...for+Viewsonic+Gtablet+10+-+Free+Shipping.html
Build quality is not super, but it is functional.
It is $ 24.99 but will take 2 weeks or more to get to you.
don't waste your money
I've had one of these before. They are really cheap looking and are not leather but a shiny slippery plastic. It is not recommended for use in a professional setting unless you enjoy people laughing at you. There is a thread in this accessories section that covers this case at length. Search for USB keyboard case.
Also, the tablet does not stay firmly in the case and will slip around a lot and may even fall out.
Avoid this case like a dirty diaper.
sjmoreno said:
I've had one of these before. They are really cheap looking and are not leather but a shiny slippery plastic. It is not recommended for use in a professional setting unless you enjoy people laughing at you. There is a thread in this accessories section that covers this case at length. Search for USB keyboard case.
Also, the tablet does not stay firmly in the case and will slip around a lot and may even fall out.
Avoid this case like a dirty diaper.
Click to expand...
Click to collapse
LOL, you and me have different priorities! I'm not buying this to wow people and I'm really not concerned about people laughing at me. I am concerned about the tablet not fitting tho. Either way, this case would only be for when I wanted a keyboard with me, which is not all the time (otherwise I'd stick to my netbook which is about the same size as the tab+keyboard case).
When I'm going on a trip, plane ride, camping, etc, and this will be the only thing I have access to when traveling light, I like the idea of a keyboard option. But that's another thing to carry, so I'd rather it be built into the case. But the rest of the time, a thinner classier case (like the Kindle DX ones) would be preferable to me, especially to sit and read in portrait orientation.
cbay said:
There seem to be 2 clips on the bottom and 1 on the top to hold it. Most cases come with 1 (or 2 ) more clips on the side. Without this there is a chance of the tablet sliding out through the sides. Although once you have side tabs you have to be careful that they dont block the usb port.
Also you *have* to check the dimensions
I have a
http://witglobal.com/goods-2286-10i...for+Viewsonic+Gtablet+10+-+Free+Shipping.html
Build quality is not super, but it is functional.
It is $ 24.99 but will take 2 weeks or more to get to you.
Click to expand...
Click to collapse
That's a really great find, and for $4 more than this ebay auction, you are vouching for the fit! Do you have any pictures of your G-tablet fitting into that case?
Dishe said:
That's a really great find, and for $4 more than this ebay auction, you are vouching for the fit! Do you have any pictures of your G-tablet fitting into that case?
Click to expand...
Click to collapse
Dont have pics, but it fits (it is made for the gtablet),
Some info/pics are at
http://forum.xda-developers.com/showthread.php?t=1015853
goodintentions had a video review for his, on that thread but the link does not seem to be working.
I need a keyboard rarely, when I am typing out a big email. It is functional for that purpose. Some minor cons as I see are
1. Even with tabs on 3 sides, it can slip out of the 4th side, so you have to hold it right. Am thinking of adding a Velcro strip on the 4th side.
2. The leather is suspect, and it stunk up my room for a few days after I opened it.
3. It adds quite some weight.
4. Have to reboot the gtablet after connecting the keyboard most times for it to work.
5. The keyboard connects to the big USB, the small USB is covered by the left tab. But I rarely use that when it is in the case.
But it is $25, the USB cable length is fine, and it does have a magnet for the USB cable !!!
I bought one of these cases off ebay, just waiting for it to arrive. I bought one "specifically" made for the gtablet, with the tabs not blocking the usb port. I know I could of had one for less, but would have had to mod the case to fully work with the gtablet. I was actually looking at the one OP posted to save a few bucks, but I didn't like the way the case was designed, with no tabs to hold the tablet in place on the sides.
So I am a student, and I'm always walking around with a backpack full of books. I want to carry my transformer and its dock with me so I can do some on the fly word processing between classes when I get a chance, but I'm worried about the weight of my books being pressed against the dock, being pressed against the tablet in the case.
So, does anyone know of a good, hard, case that will fit the dock and the tab? I looked through the sticky and didn't seem to find anything that wasn't discontinued (unless I missed it??).
Thanks a lot!
Regards
Smith
I have the same conditions in my bag due to my classes.. I don't use a hard case but these:
http://www.amazon.com/s/ref=nb_sb_s...oocase+super+bubble+neoprene+sleeve+case+10.1
work super good and are only like 15 bucks.. the bubbles on the inside are super cushiony.. I don't even worry when its in there.
That's dope! If I may ask, how do you situate your tab in your backpack? Front, back,? And do you face your screen to your keyboard dock or away?
smithisize said:
So I am a student, and I'm always walking around with a backpack full of books. I want to carry my transformer and its dock with me so I can do some on the fly word processing between classes when I get a chance, but I'm worried about the weight of my books being pressed against the dock, being pressed against the tablet in the case.
So, does anyone know of a good, hard, case that will fit the dock and the tab? I looked through the sticky and didn't seem to find anything that wasn't discontinued (unless I missed it??).
Thanks a lot!
Regards
Smith
Click to expand...
Click to collapse
I carry mine in my backpack with no issues. I wanted one that would encase the tablet AND the dock. In my opinion, this one is the most practical if you are almost always using the dock anyway.
Well, since I can't put a link in a reply yet; go to amazon and look up: "Poetic(TM) 2in1 Ultra Light Leather Case for ASUS Eee Pad Transformer"
Hope this helps!
http://www.amazon.com/HP-Tablet-Sleeve-Black-Trim/dp/B0033RSNPG/ref=dp_cp_ob_e_title_3
I use this for with the dock. There's also a more expensive blue one, I wish they had a green.. but I got the red because it's cheap and worth the cost!
I am using the malina case made for Mac Air 11. Fit perfectly.
http://www.walmart.com/ip/Targus-CityGear-Mini-for-iPad-Tablet-Netbook/16480776
I ran across this one at Walmart. Fits perfectly while docked or not, and is very well cushioned. It has a good amount of room, allowing me to carry my adapter, phone charger, Jambox, and ZaggSparq. For $25, it's a pretty good deal.
yes its very nice
So I was searching for a replacement case because I'm really unhappy with my poetic slim case. I was searching on Overstock and came across this swivel case, and im in love. I've seen one similar for the ipad, but did not know one existed for the transformer. It leaves access for all ports, has a hard plastic back covered with that fake leather type feeling material. The transformer can rotate 360 degrees in the case as well as stand. The case does not add much bulk, but protects all sides, screen, and back. It closes with an elastic strap. I'm really happy with this new case!
http://www.overstock.com/Electronic...-Asus-Transformer-Tablet/6413029/product.html
Sent from my SGH-T989 using XDA App
Edit: I'm trying to upload pics, but the xda app won't let me for some reason. Pics posted soon as I get home.
Yep, I have about the same case, I purchased mine off Amazon. It's superb. My only complaint is that it's somewhat easy for the TF to fall out of the grooves when you have it propped up. Still, works great for what I wanted.
ImSlower said:
Yep, I have about the same case, I purchased mine off Amazon. It's superb. My only complaint is that it's somewhat easy for the TF to fall out of the grooves when you have it propped up. Still, works great for what I wanted.
Click to expand...
Click to collapse
yea, my other case did the same thing, but it's not bad for watching movies and video clips.
Glad to hear you like it. I just ordered the same one from Hand held items. They have it for 17. 99, and I had a $5 off cupon it was under $16. Shipped.
Sent from my Transformer TF101
Yes, very good case. Most case has cut opening on the corner and the tablet will dent if drop. This case covers all corner and it is very solidly build. There is the two and three groove version, get the two groove one. Mine holds the tablet very well and doesnt came off easily.
We just received ours and I could not be happier. It's exactly what I wanted out of the case.
Sent from my Transformer TF101
I have a question about this case. Can you charge the device with the case closed?
on the overstock link it says that it has cutouts for everything...they could just be saying that though
Sent from my Transformer TF101 using xda premium
osho741 said:
I have a question about this case. Can you charge the device with the case closed?
Click to expand...
Click to collapse
Yes you can, u can swivel it either way. That's why it's call 360, perfect isn't it?
yes! I dont know why it didn't occur to me that it would just swivel to the side with the charge port
Just received my case today from Overstock! Fits perfect. Great case...
Thanks for the heads up on this case!
I have a couple questions. How easy is it to remove for those of us who have the dock? Also if you fold the lid back how flat does it lay like if you were to read with it?
Interested, may buy one.
Sent from my ADR6425LVW using xda premium
Novarider said:
I have a couple questions. How easy is it to remove for those of us who have the dock? Also if you fold the lid back how flat does it lay like if you were to read with it?
Click to expand...
Click to collapse
It is pretty easy to remove the case. It holds the tablet very securely, but is easy to take out. And the lids folks back 2 ways. Either close to the swivel point, our in the muddle if the case. either way, it lays very flat.
Is it dockable? I only ask because the picture on overstock has a dock showing. If not its still a nice case for the price.
Sent from my HTC Sensation using Tapatalk
Not to bump an old thread, but is this case available with 3 angles instead of just two? How well does the plastic housing protect the tablet? I'm assuming is not removable like the RooCase as well.
Actually this case was the second one I bought..
I love this case... the TF is easy to put in it and remove it (while still being secure) and I dont own a dock so I cant say as to that, but other than it slipping out of the grooves sometimes its the best case I have seen... this is my new go to..
Are any of the cameras obstructed by the case? My original case I replaced (rooCase) had camera holes as small as those and the back camera looked like it had a circular vignette. The front camera only became affected when the case shifted a bit. Looks like this case would have similar issues, even though I love the rotatable aspect.
http://www.amazon.ca/360-degree-Swi...4PF8/ref=sr_1_1?ie=UTF8&qid=1331563396&sr=8-1
Is this the same case that you got, OP?
rikou_demon said:
Are any of the cameras obstructed by the case? My original case I replaced (rooCase) had camera holes as small as those and the back camera looked like it had a circular vignette. The front camera only became affected when the case shifted a bit. Looks like this case would have similar issues, even though I love the rotatable aspect.
Click to expand...
Click to collapse
I haven't noticed any issues with my camera, although i don't take pics with
it though... use my sgs2 for that... ill post pics of what the rear camera looks like with the case on.
BruceWayne133 said:
http://www.amazon.ca/360-degree-Swi...4PF8/ref=sr_1_1?ie=UTF8&qid=1331563396&sr=8-1
Is this the same case that you got, OP?
Click to expand...
Click to collapse
It looks exactly like the one I have.
Sent from my Transformer TF101 using Tapatalk
hey! has anyone able to find any nice leather cases for the TF201 that would also allow keyboard docking?? i found a few nice cases but they all specifically say (This Case is NOT Compatible with Keyboard / Dock)
spex714 said:
hey! has anyone able to find any nice leather cases for the TF201 that would also allow keyboard docking?? i found a few nice cases but they all specifically say (This Case is NOT Compatible with Keyboard / Dock)
Click to expand...
Click to collapse
Someone here posted a bunch of links, in those links I found a "nice" pad/keyboard case, but guess what, I can't friggin find it now, but I am looking. Will post back once I find it, good news is, there is one out there now. I am in here searching for it now, have my prime, now I need a case.
this case is exactly what im looking for! except its for the TF101
http://www.amazon.com/Tuff-Luv-Veggie-Leather-Keyboard-Transformer/dp/B005965US2/ref=pd_cp_e_1
hopefully they come out with a TF201 version
spex714 said:
this case is exactly what im looking for! except its for the TF101
http://www.amazon.com/Tuff-Luv-Veggie-Leather-Keyboard-Transformer/dp/B005965US2/ref=pd_cp_e_1
hopefully they come out with a TF201 version
Click to expand...
Click to collapse
UG, that looks like the one I found, same thing I am looking for, if I find one for the Prime, will post and let you know.
---------- Post added at 09:00 PM ---------- Previous post was at 08:55 PM ----------
>> Ultimate Transformer PRIME TF201 Accessory Guide
http://forum.xda-developers.com/showpost.php?p=20013463&postcount=1
http://forum.xda-developers.com/showpost.php?p=20013463&postcount=1
+1 would like one of these for the tf201 as well
I'm also looking for something like this
Bookmarked this thread, if I ever find one I'll post a link.
I emaile Tuff-Luv asking if they would release a case that is compatible with both the keyboard and dock. They replied saying they will be releasing their line of cases in Feb of 2012, so hopefully they will release a nice case by then!
spex714 said:
I emaile Tuff-Luv asking if they would release a case that is compatible with both the keyboard and dock. They replied saying they will be releasing their line of cases in Feb of 2012, so hopefully they will release a nice case by then!
Click to expand...
Click to collapse
Thanks for the update, looking forward to their release.
Wow, this is pretty slick looking. I might pick one up in Feb. Until then I am just going to use a neoprene case to carry it around like a laptop and use it naked when I take it out.
I thought I saw in another thread someone say there is very little clearance between the keyboard and the screen when it is closed. I wonder how a case like this will work if that's true.
You need to un-dock the keyboard.
wwwamazoncom /MiniSuit-ASUS-Transformer-Keyboard-Portfolio/dp/B006ULQPTI/ref=pd_rhf_se_p_t_3
Its available for pre-order on amazon. add the periods and delete the space after .com
But it will not be able to close properly with that Tuff-lov thing...?
There's leather on top of the keyboard dock and alson on the front of the tablet.. So thats 2 x leather layer when trying to close the thing.. it cannot be healthy for the dock hinge....
I think I've seen the Case Logic case asked about or maybe even shown somewhere else but I can't find it (I've searched, no luck). SO I'm hoping this might be a good place to post pics, at least it's on topic (except it's not leather).
I've seen this online but I stumble across at Walmart so had to check it out knowing I could easily return it. I is a semi-hard sided case that will hold the tablet and dock when they are connected (or if they are not, just be careful where the hinge is on the dock when you close the case if its' not connected).
I like it. It's growing on me. It offers a lot of versatility. At first I thought wth am I going to do with the dock when I only want to use the tablet (where am I going to store it or put it if I'm traveling or at a friends, etc) but quickly found it kinda just stashes away on it own within the case. Problem solved!
My opinions, fwiw:
Pros -
*cost $25
*durable, rugged
*really good fit
* soft lining, extra padding behind the tablet
*presents well ( easily walk into any meeting or class room with this)
*while it's not technically a portfolio, there is room for some note paper and my stylus fit in there in a little spot on top and the mettle never hit any of the metal on the tablet or dock
*neoprene cover does just *barely* wraps around it if I want added cushion
*versatile viewing angles
*can keep dock in the case detached from tablet and still use tablet with case
*you can leave the top straps on and attached to the top corners of the tablet when you close the case - it's not putting any pressure on the dock hinge at all, it adds a little more cushion between the two units, plus it fills up the space within the case a little more
Cons -
*the strap on the top left corner WILL hit the volume rocker.
*takes a bit of fooling around with the middle velcro part to see how and where it will work with the hinge, but it's worth the little extra time so it doesn't get messed up later
*be careful if you've detached the dock and try to close the case with the units separated - the hinge needs to be in the right place or we might risk breaking it or scratch the glass - maybe not but I wouldn't want to force it or risk it.
*it adds significant overall weight. I don't have a scale that will measure it , but it is heavier. That being said, I may not to drop it from my 3rd story balcony, but I feel pretty safe with it withstanding most common impacts and injuries. If I took the time to add another thin cushion later I am fairly certain it would withstand any fall from counter or waist height
whats the name of the case logic case?
It's this one I think (or very very similar):
http://www.amazon.com/Case-Logic-ETC-110-10-Inch-Tablet/dp/B004XANKWI
I got it at Walmart for $25.
The biggest pro to this one is that it will securely hold both tablet and dock. I'm glad I have it, I wont be returning it, it will serve it's purpose when I need a case like this. At home, I'm very careful. Now I know I can take both with me and they will have a safe home, too
650hpAMG said:
Thanks for the update, looking forward to their release.
Click to expand...
Click to collapse
I just got my mini suit case or the prime. It fits well and works with the dock and with out the dock. I will post back with any gripes or comments once ive given it more of a chance.
Sent from my Transformer Prime TF201
I've got this on pre order
http://www.amazon.com/gp/product/B006ULQPTI/ref=oh_o00_s00_i00_details
Covers both
Found one seller on EBAY
Found one seller on EBAY...
http://www.ebay.com/itm/Keyborad-Leather-Cover-Case-Pouch-Skin-Asus-EeePad-Transformer-2-Prime-TF201-/160726484419?pt=AU_TabletAccessories&hash=item256c0b85c3
FWIW
I have the Transformer Prime with keyboard, and just got the mini suit case. I like it, for the most part. The leather feel is much nicer than the other brands I've seen. And it's really cool how it covers both the Prime and the dock, yet will come apart (with a couple of snaps) when you don't want to bring the dock along. The only thing that bugs me is the sloppiness of the cover without the dock. It's like a book with a very old, very loose, sloppy binding. I'm not sure I like that, and may decide to pick up one of the cheaper covers to use when I'm not planning to have the dock with me.
I have a question too, about the dock. Is there a forward delete key? Or a hot key that works to delete forward instead of backspacing? That missing function has bugged me since I first discovered Android! Just sayin'...
imb951 said:
+1 would like one of these for the tf201 as well
Click to expand...
Click to collapse
I just found this on Amazon: http://www.amazon.com/MiniSuit-ASUS-Transformer-Keyboard-Portfolio/dp/B006ULQPTI/ref=pd_cp_e_0
I already have a bag that I use to transport my transformer and dock together. I am looking for something like a sleeve that will permanently stay on both the transformer and dock for protection, while they are docked together. If this does not exist, is there a sleeve that goes on the transformer itself that can stay on even when the dock is connected? Basically I never disconnect the dock from the transformer but want to be able to have protection on the transformer while it is being used and is docked.
http://www.decalgirl.com/skins/Asus-EEE-Transformer-Skins
Try that.
Or try this. I love the skins from bestskinsever as it really keeps the fingerprints down to a minimum. It is a clear, tough and beautiful skin that I use on all my electronics and still fits into the dock with a minimum of fuss. The price is right too at $19 for a full body skin or $14 for just the front.
StevieJake
Hi
I'm also looking into this as well, not so much a skin, but a sleeve or case.
So far I've found a few items, these two are the ones that catch my eye the most:
Sikai
Triple case
Any thoughts on one of these?
I have bought this:
http://forum.xda-developers.com/archive/index.php/t-1245903.html
if it's good to you to double width of the tablet it is good.
I always use this case only for the tablet alone, because I fear that added thickness would damage dock's screen motion mechanism.
Cheers, ended up buying this one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190642270942&ssPageName=ADME:X:RTQ:US:1123
Will report back when I get it.
wow there are some awesome skins at decalgirl.
I didn't even know about skins when I bought a 'leather' case thing; still don't really. This could be a dumb question but what do they actually cover? Back of screen? Front of screen? Bottom of dock as well?
My TF hasn't actually arrived yet but I anticipate that I'll be taking only the pad into uni some days and pad+dock other days.
Pad+dock days are sorted already but when I'm just taking the pad do you think a skin will be enough protection? It will travel in my backpack so I'm really looking for as small as possible with screen-scratch protection and a little bit of cushioning perhaps. I know its always going to be a tradeoff but what's your experience been?
mmm, I do like the look of those skins.....
thanks!
browngeek said:
Cheers, ended up buying this one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190642270942&ssPageName=ADME:X:RTQ:US:1123
Will report back when I get it.
Click to expand...
Click to collapse
Im also liking the case...any update on your experience?
bonespanda said:
Im also liking the case...any update on your experience?
Click to expand...
Click to collapse
Description says you have to take the dock off to close the case.
Sounds like a dealbreaker to me
Sent from my SPH-D710 using Tapatalk 2
bonespanda said:
Im also liking the case...any update on your experience?
Click to expand...
Click to collapse
Its not bad, its ok.
It stays on my tablet. However when I attach the keyboard to the tablet, doesn't work so well. I need to flip the case over and then it will fit with the keyboard on (but then the keyboard remains unprotected). Not ideal, but I get by. I then put the whole in one of those netbook style protected sleeves.