Help overclocking on cm7.2 - Galaxy Ace S5830 General

Pls help me. I oc my sga with ketut kernel and frill on . How to I see or confirm it??
Sent from my GT-S5830 using xda premium

If the settings are available it means you have it.
If you need to confirm try CPUspy app from market.

Settings-CyanogenMod Settings-Performance-CPU Settings-Max Frequency
There you will find the settings for OC'ing your CPU. I suggest not clicking the "Set on Boot" option until you have found a value that works for you, as the phone will shut off if you pick one that is too high. You don't want it booting into an unstable value or you'll have a lot of trouble changing it back!
Good luck, and don't cook your phone

Listen to @SGA's advice... It makes sense, believe...
Let's not forget the OC Benchmark apps available for free in the market...
Stay Breezy n Be Lucky...
Peace...

Hi ,
reading above thread with interest , have installed CM 7.2 on my ace and I like it - have all the settings there but do not seem to be able to move the settings more than 800mhz , any ideas ?
thanks in advance

saintetienne said:
Hi ,
reading above thread with interest , have installed CM 7.2 on my ace and I like it - have all the settings there but do not seem to be able to move the settings more than 800mhz , any ideas ?
thanks in advance
Click to expand...
Click to collapse
You need to flash ketut's OC kernel then. You can find it in the development section. Be sure to read the various threads on Overclocking before attempting it. All the best!

many thanks

Hi ,
I have tried to install the oc kernel but get the message cannot install ... from sd card - I remember this from something previously , can anyone help ,
thanks

Are you using cwm4/5? Just install the zip from recovery. Let me know the error you get.
Sent from my GT-S5830D using xda premium

Hi ,
I am using cwm v5.0.2.6 , I have attched photo of error message ,
thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks for help , but I sorted it - changed the 16gb card to a 2gb then retried and bingo
cheers

I would advise downloading the kernal again and then re-trying.
Sent from my GT-S5830D using xda premium

Related

[Q] Quadrant and my SGS2

Hello there
I just want to know if my SGS2 is very good with this Quadrant?
For your information i deodexed my own firmware KE7 and remove the unnecessary apk's also i did not overclocking.!!
Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would say not bad at all I get 3005 with cpu stock standard speeds
what did you modify exactly?
I get 3100-3500 with stock rom ke7, so I think it's usual.
LesserCure said:
I get 3100-3500 with stock rom ke7, so I think it's usual.
Click to expand...
Click to collapse
Agreed here
Am getting 3230 to 3300 all the time.
Stock KE7 - Only thing done is rooting.
Bit of a useless tool in my opinion
Tells the user nothing at all.
jje
Sent from my GT-I9100 using XDA Premium App
First , thank you dears for such information that you gave...i appreciate it guys
jody2k said:
I would say not bad at all I get 3005 with cpu stock standard speeds
what did you modify exactly?
Click to expand...
Click to collapse
I only did the deodex and zipalign for each .odex and .apk file
i.e. file by file "manually" by baksmali and smali then i removed the application that i do not use "some apk files"
Thanks again
Tried to post my quadrant picture, but cant figure out how to do it. oh well, i copied the url link but not working
I got 3506 on KE7. The SGS2 could be better, but in the 3D benchmark section of quadrant, you can clearly see that the SGS2 is hitting the 60fps soft limit. As a result, the 3D score is artificially low.
HOME + POWER BUTTON = built in screencapture
xinfinityoO said:
HOME + POWER BUTTON = built in screencapture
Click to expand...
Click to collapse
never knew this exists, great
Hi, my SGS2 have 4121 on Quadrant Standard...
Ph34r_999 said:
Hi, my SGS2 have 4121 on Quadrant Standard...
Click to expand...
Click to collapse
Yeah.....so?
Sent from my GT-I9100 using xda premium
Sent from my GT-I9100 using xda premium
I think theese scores are very Rom specific. At the moment i get 3300, but i also got 4500 with other Roms and kernels
Quadrant is a little outdated.....last update was like a year a go.
Sent from the little guy

[Q] questions about omega rom by team cooper

hi guys...i'm new to this forum and i would be really thankful if you guys could answer my questions..
omega rom is one of the best rom for our ace...it's really fast and very stable...my question is..
1)how to overclock in this rom?
2)how to enable CRT in this rom?
thx to those who take their time answering my questions...cheers
ace-user said:
hi guys...i'm new to this forum and i would be really thankful if you guys could answer my questions..
omega rom is one of the best rom for our ace...it's really fast and very stable...my question is..
1)how to overclock in this rom?
2)how to enable CRT in this rom?
thx to those who take their time answering my questions...cheers
Click to expand...
Click to collapse
Overclocking is not possible with the kernel used in Omegav2 rom!
For CRT animation just check out the first page & download the patch & Flash it
P.S: Don't mount anything for flashing the patch!
Press Thanks If I Helped!!
thx a lot..so if i wan to overclock which kernel should i flash?and is tat kernel stable and bugless?
after i flash the patch crt animation still doesnt work...do i hv to enable it manually?and how do i do tat?
1. OmegaROM supports OC by default. Just download SetCPU or similar OC app from the market.
2. You need to enable animations in settings>display to see the crt-off animation.
Any other queries ?
thx for the reply...
so far this rom really awesome..just hope that we can change themes as the default theme kind of suck...
ace-user said:
thx for the reply...
so far this rom really awesome..just hope that we can change themes as the default theme kind of suck...
Click to expand...
Click to collapse
Yes..
You can use any theme made for stock rom.
If you want try out the black and white theme in the OmegaROM thread.
Sent from my GT-S5830 using XDA App
Well done ,learn more
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thx again!

Constant freezing and battery loss

I have looked everywhere for an answer but have found nothing. I can use my phone just fine until it completely freezes. I am left with no option but to take the battery out and restart and come back to a low battery that went from roughly 80% to 10%. I have no clue what to do. I'm not sure if i need to wipe and format. Can anyone give me some advice? If it's a case of having to wipe, can I have details on how to do this without losing information?
Thanks
Attached is my phone system info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9100 using xda app-developers app
I can't see the picture (don't know if it's just me), but on what rom/kernel are you? And do you UC/UV?
Sent from the Matrix
My kernal version is too long to understand. I'll try and upload pic again. Im on android 4.0.4 and just before this reply i had to restart phone again!!! I don't know what you mean by UC/UV.
Sent from my GT-I9100 using xda app-developers app
i think you have the original firmware, try to install the newest firmware LSJ you can get this at sammobile.com or you can choose a custom rom which you can find here
daveydoo said:
My kernal version is too long to understand. I'll try and upload pic again. Im on android 4.0.4 and just before this reply i had to restart phone again!!! I don't know what you mean by UC/UV.View attachment 1573323
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Yeah, you're on an official rom, and since you don't know what it means, I assume you don't underclock (UC) and/or undervolt (UV)
Ever considered rooting and flashing a custom rom? Or, like stated above me, flash some other official firmware through Odin to see if the problems still excist (except someone else has another sollution).
Sent from the Matrix
u got 2 options :
1.spend the rest of ur life trying to figure out wats causing the freezing to this retarded android system AND never find an answer
2.save ur time,money and efort and do ur self a favour : buy a real smart phone that works and does all it promises .... buy an iPhone

[Q] SemcClock strange graphic bug

Anyone ever encountered this issue ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM is Ultimate HD 3.0.2 ; Kernel CTCaer 2.6 ...
Any ideas ?
Cheers
effe12 said:
Anyone ever encountered this issue ?
ROM is Ultimate HD 3.0.2 ; Kernel CTCaer 2.6 ...
Any ideas ?
Cheers
Click to expand...
Click to collapse
Ask your question in the rom thread, maybe someone has the same problem & can help you.
mauam said:
Ask your question in the rom thread, maybe someone has the same problem & can help you.
Click to expand...
Click to collapse
can't post on ROM thread, need 10 posts lol
effe12 said:
can't post on ROM thread, need 10 posts lol
Click to expand...
Click to collapse
Then, try this: wipe cache partition & dalvik or reflash your rom & report if it works, please.
Thanks for the idea, clearing cache & dalvik doesn't change anything. I ain't got time to go through a complete ROM reinstallation just to check on this little glitch lol Will do it when/if ROM upgrades ...
Thanks anyway !
Remember sandy7(I think) saying that it was a known. Bug. And that the newer version (or a fix zip) solves it.
Regards
-N
Thanks for the hint ... I'll search Sandy 7 's posts then ...
cheers
just unchek ticks from force gpu rendering (2d hardware acceleration):silly:
viorel78 said:
just unchek ticks from force gpu rendering (2d hardware acceleration):silly:
Click to expand...
Click to collapse
That's it !
Thanks mate !
cheers

[Q] Problem Prevent me installing a new rom

hi
i have S5830i accidentally the device stop booting.
to be specific when i press the power button screen show the model of the phone and froze there untill i remove the battery.
the problem is the Debug mode is off.
i tried factory settings but the device still not booting, also empty the cach didn't work
tried odin and searched around ADB but both requested Debug mode to be enabled .
anyone have a solution for this problem ? any hint , suggestion is appreciated.
thanks in advance
idea to solve it
i found a way and it's throw (upgrade from sd card ) the problem is i need an official rom for galaxy ace s5830i that can put it on sd card to fix the firmware or even if it's unofficial one i'll do it then fix it with odin to the official rom.
thanks in advance and please help if u can.
samer226047 said:
i found a way and it's throw (upgrade from sd card ) the problem is i need an official rom for galaxy ace s5830i that can put it on sd card to fix the firmware or even if it's unofficial one i'll do it then fix it with odin to the official rom.
thanks in advance and please help if u can.
Click to expand...
Click to collapse
go here that's where all the ROMS and advice is available for your model
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

Categories

Resources