Related
Ok so on the tilt 2 it has a strap/charm hole to put well a strap or charm on ur phone, and i used it alot! But recently the little plastic piece in the hole that holds the charm/strap snapped off on mine, Does anyone have any good suggestions on what I could do, I'm rather clumsy so a strap is rather needed
Where on your Tilt2 do you have such a hole? Mine does not.
redpoint73 said:
Where on your Tilt2 do you have such a hole? Mine does not.
Click to expand...
Click to collapse
Its on the back at the bottom center, right above the charging port, love the icon btw
Right here
Dragonmaster0430 said:
Right here
Click to expand...
Click to collapse
that is so obvious is not for a strap!, the only thing i can come up with is that is for some kind attachment whole for like an accesory or maybe a craddle, but definetly not a strap, i dont think, lol
the phone is too heavy and you prob snapped the plastic cover off a lot too didnt you?
but i would love to really find out trully what kinda accesory would attached to it
marmotabassriderx said:
that is so obvious is not for a strap!, the only thing i can come up with is that is for some kind attachment whole for like an accesory or maybe a craddle, but definetly not a strap, i dont think, lol
the phone is too heavy and you prob snapped the plastic cover off a lot too didnt you?
but i would love to really find out trully what kinda accesory would attached to it
Click to expand...
Click to collapse
Its called a hanger hole, its in the manual
http://www.htc.com/us/support/tilt-2-att/tech-specs/
No my plastic cover never came off
Anyone got and idea of how to fix it?
Looks like the holder is part of the phone frame. If the little T-shaped tab broke off, you may be SOL on fixing it. Perhaps you could buy a broken Tilt 2 off eBay (I've seen them) and transfer the part, but taking a phone apart and putting it back together correctly is not an easy task.
I never would have guessed that hole was for a strap or charm, although that's quite apparently what its for. The T-shaped tab under the battery covers sure doesn't look strong enough for the purpose.
never had a hole on mine, whered u get that from?! lol
Dragonmaster0430 said:
Its called a hanger hole, its in the manual
http://www.htc.com/us/support/tilt-2-att/tech-specs/
No my plastic cover never came off
Click to expand...
Click to collapse
oh... so you can wear the phone as a pendant... ya cause its so small and light i might mistake it for a necklace...
Same thing happened to me - I keep thinking how lucky I am it didn't go flying when it broke. I was able to loop the hanger through the square just to the left of where the "t" was - I can provide a pic shortly. Its been working so far...
apxi84 said:
oh... so you can wear the phone as a pendant... ya cause its so small and light i might mistake it for a necklace...
Click to expand...
Click to collapse
I never, ever would have guessed that that hole was for hanging the little charms off of. I once wondered why this phone didn't come with something like that when most phones did.
Amazing what reading the manual can do~!
love hanging charms
sorry about your luck.
yep, i love hanging a charm or a cute screen cleaner from the charm hole.
been using it for a year..hope mine doesnt do the same
npropanol said:
Same thing happened to me - I keep thinking how lucky I am it didn't go flying when it broke. I was able to loop the hanger through the square just to the left of where the "t" was - I can provide a pic shortly. Its been working so far...
Click to expand...
Click to collapse
Oh please do
I use a strap for mine. It works wonderfully!
Wow that's great. Does anybody know where to find a strap that would be good to wear my Tilt2 around my neck please? It would be great for working while wearing a wired headset. Hate keeping it in my pocket and I'm not happy with any of the holsters. Especially that oem one. That sucker will help a guy lose his phone in a hurry...
EDIT; Nevermind. I figured out to search for the words phone and lanyard on ebay. Decisions, desisions.
Memory card lanyards work fine too. I'm using a lanyard for a SanDisk MicroSD adapter for my phone. It works great.
Whoa, that little plastic bit holding the weight of a Tilt 2 on a lanyard or wrist strap? Sounds like tempting fate to me. I never have used a wrist strap on a phone and this definitely doesn't inspire me to try it now, lol. HTC should have built something a little more substantial than that into the frame if they wanted it to be really useful as a hanging point for the phone. I have been wondering where the strap on the HTC accessory page was supposed to attach, now I know.
Reply to Marlin29
Marlin29 said:
Whoa, that little plastic bit holding the weight of a Tilt 2 on a lanyard or wrist strap? Sounds like tempting fate to me. I never have used a wrist strap on a phone and this definitely doesn't inspire me to try it now, lol. HTC should have built something a little more substantial than that into the frame if they wanted it to be really useful as a hanging point for the phone. I have been wondering where the strap on the HTC accessory page was supposed to attach, now I know.
Click to expand...
Click to collapse
You are correct. It does look cheesy. However, so far so good. I do think it is important to be certain that the string of the lanyard is seated to the base of the "T" opening really well. Fortunately that is easy to pull off. Also I don't think I'd swing it around by the lanyard with the cover off. After a few weeks of using a wrist strap and a neck lanyard I don't see any signs of stress on the plastic. So maybe it will hold out.
So I just got a View, and for the most part it seems to be a well-crafted device. But, when I press on the front side of the plastic piece on the bottom (right above the charging port), it makes like a cracking noise, like the plastic doesn't fit right. Does anyone else have this? I'm trying to decide whether it's major enough to try to send in for warranty/RMA, especially since I took the OTA to HC and now want to HTC unlock to flash back and do S-Off for some rom action, which I think would void the warranty :-/
Mine is very solid, no cracking at all.
just got mine today and it does have that cracking noise ..
Hmm okay....well so far is 50/50 lol so maybe its common. I noticed that the plastic piece on the bottom can be slid forward and lifted off the charge port, and the noise seems to be coming from the gap between the screen border and the plastic piece over the charge port. So, maybe I'll try putting something in the gap to see if it stops. I feel stupid doing a warranty claim for something so trivial.
no cracking here, but i got something i do not like.
the screen is not fitted correctly on the lower side of the device.
It is not in line with the rest of the metal part, in fact is aprox 1 mm above it.
If you look at it you may not see it but if you swype your finger you can feel the edge of the glass.
But otherwise it is well built device.
I do not think i am going to try to replace it(or maybe i will).
That's ok. I almost ripped my bottom off looking for the sd card slot.
Sent from my PG41200 using xda premium
Well, mine has a loose volume keys, it gets annoying...click click click click click!
Sent from my HTC EVO View 4G S-OFF'd by Revolutionary!
Mine does the click when you press on plastic at bottom as well. I got mine from bens during the sale a few weeks ago. What about you?
Whoareyou said:
Well, mine has a loose volume keys, it gets annoying...click click click click click!
Sent from my HTC EVO View 4G S-OFF'd by Revolutionary!
Click to expand...
Click to collapse
Lol my View has that too! Click click click
Also afflicted with the click. Kind of annoying bit of cheapness/shodiness on an otherwise very solid device. Wondering if a silicone cover would help mask it...
I have something similar but it was on the top camera cover. Where it wraps around directly under the power button it didnt seal right, and there was a gap that irritated me. After trying to fix it with no luck I ended up sending it back to amazon and bought another. New one perfect.
After a pint or two at the pub, the lighted buttons wiggle and wave at me. Should I return the unit, or stop drinking so much?
I dont have an EVO LTE to do it, but I think the black matte plasti-dip should look good on the phone, giving a complete matte look on the back.
Anyone care to try it??
This is what i'm talking about
http://www.youtube.com/watch?v=FchIWF8Vi2Y
once I get my phone ill try it. im confident that it'll come right off with no damage done to the cover
The issue with this is that it will do just that, peel right off. I'd say probably less then a day.
No way that is staying on once you put it in your pocket.
i think it would stick.
check out whole cars and wheels done in plasti-dip.
plus they have more colors to choose from.
http://www.dipyourcar.com
regalpimpin said:
The issue with this is that it will do just that, peel right off. I'd say probably less then a day.
No way that is staying on once you put it in your pocket.
Click to expand...
Click to collapse
I think you'll be surprised at how effective plasti-dip is at sticking to the surface. It is only easy to peel off once you get a hole started and work it bigger and so on. If there is a tear or hole you can easily patch it by spraying some more on
I was highly considering this for my EVO as well. I've used plastidip for my grill and headlight eyebrows, and it sticks well, but one you get an edge started, it will peel right off like a sticker. I might try it (since I have some spray leftover from my grill) and if it falls off too easy, I'll just toss some flat black vinyl over the whole back of the phone.
I think it's a good idea. Plasti dip is pretty popular in the car world. I suggested the same thing in another thread a while back but no one responded.
Sent from my EVO using XDA
Looks pretty cool, I'd give it a try if I wasn't gonna use a case.
http://forum.xda-developers.com/showthread.php?t=1690710
No peeling and no need to reapply. Do it once and you're good to go.
s4pat said:
i think it would stick.
check out whole cars and wheels done in plasti-dip.
plus they have more colors to choose from.
http://www.dipyourcar.com
Click to expand...
Click to collapse
This has to be one of the dumbest things I've seen. I have plasti-dip that I use to put grip on tools. I can't imagine trying to do a whole car in it.
Sent from my New School EVO LTE
I have some at home (still need to do the rear emblems on my car). May have to give it a try.
Dear all,
I am here to just warn you of who ever owns a roxfit case, for those who have not stick it on to their phone you might want to reconsider before doing so. And for those who have it on already you might want to reconsider as well.
I bought this case like a month ago and used it for a month. Yes it is a good case "full protection" but when i tried to take it off today i realized the following:
1- it is a PAIN in the ____ to take it off, I am not even kidding. You might think why would you want to take it off? cause one day you want to clean up the dust, take out the sim card, or maybe switch case. I nearly had to break the top left corner, that little thin strand infront of the power button, and find something to stick into the top right.
Yes, i know it might not be the right way to take it off, but I have done some research and it seems like no one knows what is the "proper way" to take it off.
ANYWAY to get to the worst part
2- you know the inside of the case it has the black rectangle thingy with white words on it saying "roxfit?" Well, when i took off the case, i realized a bunch of little tiny black/grey dots on the back of my phone. No, I cannot rub it off, and i also tried erasing it off (which is not a good idea, cause it does rub off the anti-coating and causes it to look shiny which was described in another thread)
I know its just the back cover, but still...
Not trying to complain or anything, just keep your eyes open when choosing your case
LitoNi said:
Dear all,
I am here to just warn you of who ever owns a roxfit case, for those who have not stick it on to their phone you might want to reconsider before doing so. And for those who have it on already you might want to reconsider as well.
I bought this case like a month ago and used it for a month. Yes it is a good case "full protection" but when i tried to take it off today i realized the following:
1- it is a PAIN in the ____ to take it off, I am not even kidding. You might think why would you want to take it off? cause one day you want to clean up the dust, take out the sim card, or maybe switch case. I nearly had to break the top left corner, that little thin strand infront of the power button, and find something to stick into the top right.
Yes, i know it might not be the right way to take it off, but I have done some research and it seems like no one knows what is the "proper way" to take it off.
ANYWAY to get to the worst part
2- you know the inside of the case it has the black rectangle thingy with white words on it saying "roxfit?" Well, when i took off the case, i realized a bunch of little tiny black/grey dots on the back of my phone. No, I cannot rub it off, and i also tried erasing it off (which is not a good idea, cause it does rub off the anti-coating and causes it to look shiny which was described in another thread)
I know its just the back cover, but still...
Not trying to complain or anything, just keep your eyes open when choosing your case
Click to expand...
Click to collapse
I've have 2 of their products for my S, I have the hard shell, which I broke trying to take it off, those little this bits near the switches are a pain and a weak spot. This case had a thin felt patch inside to stop it rubbing the back of my S.
I also have the leather flip over case , i've had to stop using this because unlike the hard shell there is no felt patch inside to stop it rubbing , now I have marks on the back of my phone.
For the money I paid for these items, you'd think a bit more thought would go into the design...
I know, matte coating is not a cool thing, it just feels nice.
i dont know about your XPS but on mine the front bottom part where it says "xperia" that part is also glossy shiny, obviously that part's anti coating is rubbing off just by putting in my pockets.
this is what i am planning to do instead of making the same mistakes again.
the best thing to do is to get the zagg full body kit and protect the [ top, bottom, and the "xperia part" on the front ] and then get a case that only covers the sides and the back.
I had a roxfit and never had such problems.
Sent from my LT26i using Tapatalk 2
Thanks for the warning. In the case thread there was someone saying something about the shell feeling loose. (maybe it was you, dont remember).
I guess thats what you get with a hard shell that covers the phone's back and sides completely unless it was made of two parts or from soft material like TPU. I thought of buying this on long time ago because none of the TPU cases had a good fitt (and the buttons still usable).
I never did buy this one, but thougt about it since it's for me the best next to my TPU preference. I'm using a (little reshaped with hot water) 'Nillkin' TPU case at the moment. I also have a 'Gimmick Five' hard case, but i don't like the edges (like almost all hard cases) , its not smooth when putting it in and getting it out of my pocket for a phone with this size. I also do't think those cases offer much protection.
If you're planning on buying a ZAGG invisibleShield read this too: http://forum.xda-developers.com/showpost.php?p=27896421&postcount=6
and remember this skin is only for scratches not fall damage duh (cases/covers/shells might help a little with low height falls)
---------- Post added at 03:19 PM ---------- Previous post was at 02:57 PM ----------
superlimau said:
I had a roxfit and never had such problems.
Click to expand...
Click to collapse
Can you give us some more info? how is the fit? is it easy to take out? do you have any little scratches of the coating on the edges?
@LitoNi The case is a little flexible, maybe it has also to do with how someone tries to pull of the case?
I took my case many times off. Yeah it's not easy, that's for sure but I can't confirm your other complaints.
My phone slipped once out of my hand and landed on hard ground. I just have a few scratches on the top right corner and bottom left corner.
without the case the damage would have been probably much worse.
The case also was damaged in the bottom.
Currently I'm waiting for my nillkin flip leather case. Hope it will protect the front as well now.
Edit: that is now a little embarrassing. I actually have a krusell case, but the should be the same
I have the roxfit hard shell as well. It fits perfectly and doesn't feel loose at all. As for taking it off, well yeah it's a snug fit, so taking it off requires a bit of fiddling. But it is definitely not impossible to take it off without breaking it. Then again you shouldn't have to take it off daily, so for me it's not a problem.I usually just push the bottom corners of the case down, then you can stick your nail through the hole on the bottom and just push the phone out completely. Not that hard to do.
Also mine does not leave any traces on the phone. I'm pretty happy with this case.
Sent from my LT26i using xda app-developers app
i guess i was just the unlucky one with the stains.
anyway i changed the title so it wont be directly talking about roxfit, but cases in general
taking it out is slightly a pain in the ass... you need to flick it out from the powet button corner follow by volume side... one you flick it past both the 2 buttons, the rest is a breeze...
no there's no stain on the phone....
thanks
Thanks for the warning..
superlimau said:
taking it out is slightly a pain in the ass... you need to flick it out from the powet button corner follow by volume side... one you flick it past both the 2 buttons, the rest is a breeze...
no there's no stain on the phone....
Click to expand...
Click to collapse
i start with the left side and bottom, then top side and last the right side. works everytime
Let me add that there is also a slider shell case: Incipio EDGE Hard Shell Slider Case
But please talk about this on the Xperia S Case show thread and let this thread be only for the Roxfit and Krusell shells :fingers-crossed:
It has done exactly the same to my phone....It's a joke!!!!!
Hello all. I had bought my v10 last week and got my third party case from eBay a couple of days ago and that's when I learned of the sensor issue. On mine, just like others, the sensor is nearly useless.
So I did some scouting and found the UAG case. I contacted the company in regards to this case and they claim the case works 100% with the fingerprint sensor. Has anyone here used the Urban Armor Gear case? Its a pretty pricey investment and don't want to flush more $$ on cases that just won't work.
Easy Fingerprint / Case fix
Just keep the case you like.
Cut a thin (~1") strip of aluminum foil long enough to connect both metal side rails (~3").
Lay it across the back of your phone so that it covers the bottom volume button and touches each metal side rail.
Then put the case on.
As long as your finger can brush up against the foil when you try to unlock, it works every time.
They'll eventually roll out an update that will address this, so don't worry about "cases that work", they're probably lying anyway unless they have a metal strip built in.
iminahammock said:
Just keep the case you like.
Cut a thin (~1") strip of aluminum foil long enough to connect both metal side rails (~3").
Lay it across the back of your phone so that it covers the bottom volume button and touches each metal side rail.
Then put the case on.
As long as your finger can brush up against the foil when you try to unlock, it works every time.
They'll eventually roll out an update that will address this, so don't worry about "cases that work", they're probably lying anyway unless they have a metal strip built in.
Click to expand...
Click to collapse
Hmmm. I'll try the aluminium strip thing.
I tried sending you a pic of mine, but this account is too new. Best of luck
jc0187 said:
Hmmm. I'll try the aluminium strip thing.
Click to expand...
Click to collapse
iminahammock said:
I tried sending you a pic of mine, but this account is too new. Best of luck
Click to expand...
Click to collapse
Here is what I did http://forum.xda-developers.com/showpost.php?p=64016697&postcount=12. It works fine for me just remember to smooth out the edges so they are completely flat else you have a chance of scratching the metal rails.
Panzer500 said:
Here is what I did http://forum.xda-developers.com/showpost.php?p=64016697&postcount=12. It works fine for me just remember to smooth out the edges so they are completely flat else you have a chance of scratching the metal rails.
Click to expand...
Click to collapse
Hmm neat. That doesn't look too bad.
Alright. I added my foil as well. It works! Pretty dang ugly though. I didn't get mine as pretty. But hell, so far the sensor works!
jc0187 said:
Alright. I added my foil as well. It works! Pretty dang ugly though. I didn't get mine as pretty. But hell, so far the sensor works!
Click to expand...
Click to collapse
All that really matters right? The pics I linked you were my second attempt the first wasn't as nice but then again I wasn't trying, it was more proof of concept. Good luck if you try it again.
Panzer500 said:
All that really matters right? The pics I linked you were my second attempt the first wasn't as nice but then again I wasn't trying, it was more proof of concept. Good luck if you try it again.
Click to expand...
Click to collapse
Yep, just make it work. When I put the strip in, I didn't even cut around the hole like in your pics. It actually turned out pretty clean, the aluminum forms itself to the bottom button and looks kind of like a silver half-moon. I could see where yours could work better from some angles, but I never have problems, and am lazy. You can see it on imgur if you paste in mqJXBDY after the slash.
iminahammock said:
Yep, just make it work. When I put the strip in, I didn't even cut around the hole like in your pics. It actually turned out pretty clean, the aluminum forms itself to the bottom button and looks kind of like a silver half-moon. I could see where yours could work better from some angles, but I never have problems, and am lazy. You can see it on imgur if you paste in mqJXBDY after the slash.
Click to expand...
Click to collapse
I actually didn't cut that part out I used the excess and rolled it up to line the edge of the cutout so when I touch the FPS my finger would still be in contact with foil without covering up the button. Pretty much my cuts of foil are the red lines with the arrows showing where the pieces were rolled to line the edge.
That is pretty slick.