samsung galaxy s2 booting problem - Galaxy S II Q&A, Help & Troubleshooting

hello geeks,
I rooted my samsung galaxy s2 successfully every thing went well..unfortunately i dint know the exact version of android.I guess i tried to install the older version 2.3.3 in 0din it failed and tried to restart was hanging @ boot screen including yellow triangle..I made one more mistake installed ClockworkMod-Recovery and deleted cache and data and mounted few files..
can i fix this problem ?
Note : i'm able to power+volume+home and get on to download mode

http://forum.xda-developers.com/showthread.php?t=1108499
jje

Related

problem while installing new ROM on samsung galaxy sII

i have samsung galaxy s 2 , ROOTED,,GT-I9100G 2.3.6
kernel version: 2.6.35.7 [email protected] #5
GB XXKL5
,, i'm trying to install new ROM: i boot my phone into CMW recovery mode, i did wipe of factory reset,cache partition then i went to advance and wiped cache dalvike, then i went ro did format of system,data and cache,,
then i installed the zip cyanogen 7 mode through the sd card then i rebooted my phone
but my phone keep loading at the intial page where written samsung mobile with the yellow triangle,, and it is failing to boot and when i turn it off by pressing power button it keeps rebooting,,
now i restored my old ROM
but plz if anybody could help me to solve such problem of my installation process for new ROMs!!
Same Problem With AT&T
I am having the exact same problem but I have the Samsung Galaxy SII AT&T model. I have tried this multiple times but it has not worked at all and I am positive that I am doing everything correctly. Someone please Help!!

Stuck on boot screen

Hello guys iam using ics 4.0.3 official xxplq when i power on my phone the first screen pop ups and we see wriiten galaxy s2 i9100 G my phone stuck at this written screen and blinks several times then my phone boot and work fime...how to fix it ......otherwise phone work fine...
When i use gb 2.3.6 there is no boot problem after switching to ics this problem begun i reflash it via odin using different firmware of ics but same screen....i also tried factory reset through cwm mode and also fix permission and also wipe dalvik cache same problem ....iam so panicked any professional developer can help me .....my model is s2 i9100 g......
NOTE: PHONE ALWAYS BOOT UP BUT TAKES TIME ....
SOMETIMES PHONE START PERFECTLY
humzagr8 said:
Hello guys iam using ics 4.0.3 official xxplq when i power on my phone the first screen pop ups and we see wriiten galaxy s2 i9100 G my phone stuck at this written screen and blinks several times then my phone boot and work fime...how to fix it ......otherwise phone work fine...
When i use gb 2.3.6 there is no boot problem after switching to ics this problem begun i reflash it via odin using different firmware of ics but same screen....i also tried factory reset through cwm mode and also fix permission and also wipe dalvik cache same problem ....iam so panicked any professional developer can help me .....my model is s2 i9100 g......
NOTE: PHONE ALWAYS BOOT UP BUT TAKES TIME ....
SOMETIMES PHONE START PERFECTLY
Click to expand...
Click to collapse
Dude. You've started four different threads for this one problem. Stop that.
Now, you say you have an i9100G. I asked you in your other thread (that you never replied to) if you were sure you were using an i9100G firmware. Well, you ALSO say above that you used XXLPQ. Well, that is a firmware for the i9100, and NOT for the i9100G.
Use an i9100G firmware and you will be good.
..sorry i misswritten i use XXLPQ FOR I9100G.. bro i downloaded from sammobile and selected i9100g model and downloaded sammobile xxlpq firmwarre for.i9100g model i also tried ksa and malaysian i9100 g firmware same result
Sent from my GT-I9100G using xda app-developers app

[Q] China GT-I9300

Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
site
zBurnXz said:
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
Click to expand...
Click to collapse
Where did you bought it?
China
your screwed the only thing you can do is download Chn_Chn Firmware from Samsungs website and flash it though odin. And that's the only fimrware that will work, unless you flash a custom bootloader through your sd card as then it will overwrite the encrypted boot.img allowing you flash any European Firmware.

[Q] My SAMSUNG GALAXY S2 HAVE A BIG PROBLEM

I start my samsung galaxy s2 and it show me the samsung logo after the phone shut down (i can go to bios)... i had tried to wipe data and it doesnt make nothing else !!! Help me pls!! Is it harware or software problem .. can i put officialy rom again??
If you can access download mode then flash a stock rom. It should solve your problems. You will find a lot of threads about that if you search for it on xda

S6 Edge G925F stuck in bootloop [video] [Solved]

So from yesterday my phone is stucked on a bootloop ... i didn't installed anything in the last days, i didn't installed anyupdate.
I tried to install stock firmware via odin but i'm still on bootloop ...
Before installing stock firmware my phone was booting until android .. it showed Android is optimizing app x from xx and then rebooting and doing the same thing ..
After intalling stock my phone is restarting after Galaxy s6 edge - powered by android logo.
I've looked into this forum and tried to solve how others solved,but nothings work ...
Anyone knows how to solve this?
I tried to flash custom rom but i cannot copy on internal storage via twrp ... and i dunno also how to solve this ...
VladHD said:
So from yesterday my phone is stucked on a bootloop ... i didn't installed anything in the last days, i didn't installed anyupdate.
I tried to install stock firmware via odin but i'm still on bootloop ...
Before installing stock firmware my phone was booting until android .. it showed Android is optimizing app x from xx and then rebooting and doing the same thing ..
After intalling stock my phone is restarting after Galaxy s6 edge - powered by android logo.
I've looked into this forum and tried to solve how others solved,but nothings work ...
Anyone knows how to solve this?
I tried to flash custom rom but i cannot copy on internal storage via twrp ... and i dunno also how to solve this ...
Click to expand...
Click to collapse
Factory reset from recovery.
Sent from my SM-N920C
i did that ... same
Problem solved with JTAG repair.
Can you describe in details?
Sent from my SM-N920C
When a phone is in a hard-bricked state it’s most likely that the bootloaders, which is the phones initial code to launch the phones ROM, becomes corrupted.
The only way to revive the phone is to rewrite the bootloader code.
So basically, if you can't flash a rom through twrp or odin, this service we'll rewrite the os from scratch without having any acces to phone.

Categories

Resources