Hello guys iam using ics 4.0.3 official xxplq when i power on my phone the first screen pop ups and we see wriiten galaxy s2 i9100 G my phone stuck at this written screen and blinks several times then my phone boot and work fime...how to fix it ......otherwise phone work fine...
When i use gb 2.3.6 there is no boot problem after switching to ics this problem begun i reflash it via odin using different firmware of ics but same screen....i also tried factory reset through cwm mode and also fix permission and also wipe dalvik cache same problem ....iam so panicked any professional developer can help me .....my model is s2 i9100 g......
NOTE: PHONE ALWAYS BOOT UP BUT TAKES TIME ....
SOMETIMES PHONE START PERFECTLY
humzagr8 said:
Hello guys iam using ics 4.0.3 official xxplq when i power on my phone the first screen pop ups and we see wriiten galaxy s2 i9100 G my phone stuck at this written screen and blinks several times then my phone boot and work fime...how to fix it ......otherwise phone work fine...
When i use gb 2.3.6 there is no boot problem after switching to ics this problem begun i reflash it via odin using different firmware of ics but same screen....i also tried factory reset through cwm mode and also fix permission and also wipe dalvik cache same problem ....iam so panicked any professional developer can help me .....my model is s2 i9100 g......
NOTE: PHONE ALWAYS BOOT UP BUT TAKES TIME ....
SOMETIMES PHONE START PERFECTLY
Click to expand...
Click to collapse
Dude. You've started four different threads for this one problem. Stop that.
Now, you say you have an i9100G. I asked you in your other thread (that you never replied to) if you were sure you were using an i9100G firmware. Well, you ALSO say above that you used XXLPQ. Well, that is a firmware for the i9100, and NOT for the i9100G.
Use an i9100G firmware and you will be good.
..sorry i misswritten i use XXLPQ FOR I9100G.. bro i downloaded from sammobile and selected i9100g model and downloaded sammobile xxlpq firmwarre for.i9100g model i also tried ksa and malaysian i9100 g firmware same result
Sent from my GT-I9100G using xda app-developers app
Related
hey I know there has been many threads about this but my case is unique and believe me i spent more than 6 hours searching the forums for a fix but no luck
I have a brand new Samsung Galaxy S2...tried to root it and it is stuck on boot loop
so i tried the steps written on the thread (do not post a new thread) but it is not working because i can not get inot recovery mode at all
I installed a stock xxki3 and still I can not fix the problem...
please help me
Can you post your device info.
Eg: I9100 international version
Sent from my GT-I9100 using XDA App
Yep, you're truly unique
Why not start with telling us your exact product and what happens when trying to get into both recovery and download modes.
my device is I9100 middle east version
it says when i remove the battery MODEL: GT-I9100G
problem description:
I turned on the device as soon as i bought it and it said 2.3.4
so I downloaded everything needed to root it and i started odien and everything went well....except for the fact that my galaxy got stuck with galaxy s logo screen and big yellow triangle at the bottom....and nothing else happen.... it says like this for hours and hours....
so i tried to go inot recovery mode...but nothing happens after doing the volume up+power+home ...still takes me to the previous screen with yellow triangle
tried download mode and it works fine....
i can go into download mode but not the recovery mode
please guys what do i do
mukalaaa said:
my device is I9100 middle east version
it says when i remove the battery MODEL: GT-I9100G
problem description:
I turned on the device as soon as i bought it and it said 2.3.4
so I downloaded everything needed to root it and i started odien and everything went well....except for the fact that my galaxy got stuck with galaxy s logo screen and big yellow triangle at the bottom....and nothing else happen.... it says like this for hours and hours....
so i tried to go inot recovery mode...but nothing happens after doing the volume up+power+home ...still takes me to the previous screen with yellow triangle
tried download mode and it works fine....
i can go into download mode but not the recovery mode
please guys what do i do
Click to expand...
Click to collapse
You need to download files to use for your specific phone and try again. You said you have a GT-I9100G, right? Well, where did you get the files you used to root?
You also said in the title of this post that you installed XXKI3. Well, installing XXKI3 and rooting are not the same thing. Which did you do? Root using an insecure kernel? Or install an XXKI3 firmware?
I'm going to go ahead and guess that you tried to flash a firmware intended for the regular GT-I9100, and not the GT-I9100G. These two phones have different hardware, so firmwares are NOT compatible.
Amirite?
first I tried to root it using insecure kernel...when it got stuck with galaxy s 2 logo screen with yellow triangle.... I searched all over the net for a solution and one of the solutions was is to flash xxki3 ....and I did that.... but it always fail.... I also tried to flash litening rom... but at the end...it fails at MODEM stage i believe....
Now all i want is to get my phone working....I dont wanna root it anymore....
please guys please help me
Stop flashing it.
You are doing more damage.
You have the 9100G, but you're flashing 9100 stuff
I am not flashing it anymore.... but I need a solution.... I want to know how can I get it back up and running
please help me
guys i found a 2.3.6 for my GT-i9100G
but still gives me fail red color in odien
please help me
You could try flashing this kernel.
http://forum.xda-developers.com/showthread.php?t=1369977
Sent from my GT-I9100 using XDA App
mukalaaa said:
guys i found a 2.3.6 for my GT-i9100G
but still gives me fail red color in odien
please help me
Click to expand...
Click to collapse
When you get the error, does it say failed red color? Of course not.
Tell us excactly the error you are getting! If you want our help give us all the information that you have.
What error message did you get? What are the steps you took?
sorry guys i post this thread here because no one is replying me
i have problem i have galaxy s2 i9100 G model running ics 4.0.3 xxplq official when i reboot my phone it stucks on sg2 logo and blink several times and then my phone starts and some time it take long time to start ....when i was using gb 2.3.6 my phone works fine but after switching to ics my phone works fine but iam having issue with booting which is so frustrating so pls guys help me out ???i shall be very thankful to you ...
humzagr8 said:
sorry guys i post this thread here because no one is replying me
i have problem i have galaxy s2 i9100 G model running ics 4.0.3 xxplq official when i reboot my phone it stucks on sg2 logo and blink several times and then my phone starts and some time it take long time to start ....when i was using gb 2.3.6 my phone works fine but after switching to ics my phone works fine but iam having issue with booting which is so frustrating so pls guys help me out ???i shall be very thankful to you ...
Click to expand...
Click to collapse
Even tho this is not the right place to post but i wanna try to help you out. Re flash your phone with the ROM again to get out of it. maybe tick Re-Partition in Odin but wait for somebody to confirm that.
javidali engg
hai..... i red u r thread.
1. first go to CWM.
2. wipe factory/cas. part.
3. wipe internal memory.
4.put in down. mode.
5. download rom from sammobile.com
6. open ODIN check auto rebooy & f.reset time.
7. in PDA select the extracted rom.
8. flash it enjoy.............:laugh::laugh:
or
USE ANDROIDADVICES.COM there is complete procedure to flash the rom & also for root
another big problem ?
iam in problem again when i flash my phone using odin i select pda and afterwars i select .pitfile and then i slect start and my procedure fail and my phone stuck on the screen with yellow triangle saying "firmware update encountered an issue " iam starting to panic pls help me out
humzagr8 said:
iam in problem again when i flash my phone using odin i select pda and afterwars i select .pitfile and then i slect start and my procedure fail and my phone stuck on the screen with yellow triangle saying "firmware update encountered an issue " iam starting to panic pls help me out
Click to expand...
Click to collapse
try this.. http://forum.xda-developers.com/showthread.php?t=1619571
hello everyone ialso added screenshot as u can see the in screenshot screen my phone blinks several times and then start and sometime take long time to start...when i use ginger bread 2.3.6 my phone start perfectly but after flashing ics 4.0.3 my phone dont start perfectly it stcks on the screen as u can see in screenshot and blinks ...ive tried to reflash many times but same reslutt i also triied malaysian and indain firmware version but same result.....only prblem is booting anyone here pls help me
humzagr8 said:
hello everyone ialso added screenshot as u can see the in screenshot screen my phone blinks several times and then start and sometime take long time to start...when i use ginger bread 2.3.6 my phone start perfectly but after flashing ics 4.0.3 my phone dont start perfectly it stcks on the screen as u can see in screenshot and blinks ...ive tried to reflash many times but same reslutt i also triied malaysian and indain firmware version but same result.....only prblem is booting anyone here pls help me
Click to expand...
Click to collapse
how did you flash it?
odin v.185
i flashed using odin v1.85 select pda file .tar and then flash it my phone works fine but only problem in the booting sometimes start perfectly some time takes long time .....u can see in screenshot it blink on the same screen several times and then boot up ,,,,,i also flash gb 2.3.6 i9100 G it works fine for me only problem with ics 4.0.3 help me iam panciked
humzagr8 said:
i flashed using odin v1.85 select pda file .tar and then flash it my phone works fine but only problem in the booting sometimes start perfectly some time takes long time .....u can see in screenshot it blink on the same screen several times and then boot up ,,,,,i also flash gb 2.3.6 i9100 G it works fine for me only problem with ics 4.0.3 help me iam panciked
Click to expand...
Click to collapse
You sure you used an i9100G firmware when flashing ICS?
hi good day my samsung s3 i9300 battery died on me and wouldn't power on because its stuck on the samsung s3 screen i've done all the hints an tricks i saw could someone who has the same issue as i and got through please help me i firstly factory restore it and it was still stock then when booted into the menu power up botton this it had an error with some csc then that had changed to imei problem after other attempts my problem right now is that i got the device on with 4.0.4 ics but a box comes up sometimes stating phone in factory or safety mode or sometthing like tthat and i have not backed up my imei and i have ariza but it would load onto the device but it wouldn't work because it automatically boots into factory/ safety mode how can i fix this also too if i try any other software like like jellybeans versions i get pass the s3 screen and sticks on the samsung with a boot loop please help me i really need my phone
Your post is to difficult to understand .
Start at the beginning flash stock JB rom via odin .
Then report back .
jje
I have a problem with my GT I9100 galaxy S2.
Recently I rooted my phone and unlocked it to all networks and it worked perfectly. After that I did a factory reset and my phone got stuck in Logo+yellow triangle and I can't get it past that. I can't go to recovery/wipe but only to download mode.
I tried flashing ROM with official firmware I9100XWLSD_I9100VIPLSC_VIP (in Odin v1.85) but it didn't work. Last thing I did is that I flashed kernel (cm_raw_kernel_i9100_4.3_mali_r3p2) (in Odin v1.85) and it passed but it's again stuck on logo+triangle.
What should I do next? I'm quite new to all this..