I have a problem with my GT I9100 galaxy S2.
Recently I rooted my phone and unlocked it to all networks and it worked perfectly. After that I did a factory reset and my phone got stuck in Logo+yellow triangle and I can't get it past that. I can't go to recovery/wipe but only to download mode.
I tried flashing ROM with official firmware I9100XWLSD_I9100VIPLSC_VIP (in Odin v1.85) but it didn't work. Last thing I did is that I flashed kernel (cm_raw_kernel_i9100_4.3_mali_r3p2) (in Odin v1.85) and it passed but it's again stuck on logo+triangle.
What should I do next? I'm quite new to all this..
Related
Hello guys iam using ics 4.0.3 official xxplq when i power on my phone the first screen pop ups and we see wriiten galaxy s2 i9100 G my phone stuck at this written screen and blinks several times then my phone boot and work fime...how to fix it ......otherwise phone work fine...
When i use gb 2.3.6 there is no boot problem after switching to ics this problem begun i reflash it via odin using different firmware of ics but same screen....i also tried factory reset through cwm mode and also fix permission and also wipe dalvik cache same problem ....iam so panicked any professional developer can help me .....my model is s2 i9100 g......
NOTE: PHONE ALWAYS BOOT UP BUT TAKES TIME ....
SOMETIMES PHONE START PERFECTLY
humzagr8 said:
Hello guys iam using ics 4.0.3 official xxplq when i power on my phone the first screen pop ups and we see wriiten galaxy s2 i9100 G my phone stuck at this written screen and blinks several times then my phone boot and work fime...how to fix it ......otherwise phone work fine...
When i use gb 2.3.6 there is no boot problem after switching to ics this problem begun i reflash it via odin using different firmware of ics but same screen....i also tried factory reset through cwm mode and also fix permission and also wipe dalvik cache same problem ....iam so panicked any professional developer can help me .....my model is s2 i9100 g......
NOTE: PHONE ALWAYS BOOT UP BUT TAKES TIME ....
SOMETIMES PHONE START PERFECTLY
Click to expand...
Click to collapse
Dude. You've started four different threads for this one problem. Stop that.
Now, you say you have an i9100G. I asked you in your other thread (that you never replied to) if you were sure you were using an i9100G firmware. Well, you ALSO say above that you used XXLPQ. Well, that is a firmware for the i9100, and NOT for the i9100G.
Use an i9100G firmware and you will be good.
..sorry i misswritten i use XXLPQ FOR I9100G.. bro i downloaded from sammobile and selected i9100g model and downloaded sammobile xxlpq firmwarre for.i9100g model i also tried ksa and malaysian i9100 g firmware same result
Sent from my GT-I9100G using xda app-developers app
Hello everyone.I have a fully working GT i9100 on stock samsung ICS ROM 4.03 stock kernel and rooted via the cmw zip through standard recovery solution.A couple of days ago i tried to hard reset my phone.First i tried though stock recovery but after reboot phone stuck at the S logo screen.I restore a previous back up and went on trying to reset the phone using the reset code on dial pad with no luck either.I got a message that i first must delete my samsung account which was my next step but also failed.
Any thoughts on what can i do next to perform a hard reset??
Thanx in advance!
Hey guys.
My friend installed the official Jelly Bean update(XWLST) on his Indian Samsung Galaxy S II. He rooted it. He then installed Chainfire 3D, despite my warnings. Now, the phone shows the Galaxy S II logo and a yellow triangle with a ! when the power button is pressed, and then it switches off again. He gave it to me to fix it. I've tried flashing using Odin, no use. He used the Siyah S2 6.0b4.tar file to root it. I tried flashing it using that. Kies does not recognize the device, says it's not compatible with Kies 2.0, I tried factory reset from recovery mode, again, no use. I don't know what else to do. Please help me guys. Thanks in advance,
Androman 117.
Get a stock rom from Samfirmware with Odin, flash it. If it doesn't work, try another one. And another. And another.
That's the only way you're fixing this. NAND could be borked if it won't take a flash.
Also, you're being rather vague; 'I've tried flashing using Odin' - flashed what exactly with Odin ?
i have a samsung galaxy s3 (gt-i9300) it was running a custom ROM when i got it but i wanted it back to the original samsung software, so i wiped the phone through recovery mode from the rom as the volume buttons are broke on my phone, after wiping it my phone will now only come up with the boot screen saying 'Samsung galaxy Slll GT-I9300' with a red exclamtion mark at the top left corner, is there anyway i can fix this my self as i need my phone working
You did more than just a factory reset, if you used format then you may have bricked it.
Try flashing the stock firmware for your country from sammobile.com, using Odin. Follow the guide in general forum sticky thread.
This happened to me too. Flashing the stock firmware solved it.
Better be careful with those format next time :laugh:
Well,
If your volume buttons are broken there is only one way to go to recovery to flash stock.
Buy an USB jtag from ebay.
So I had my phone(s6 edge rogers) rooted for a couple of weeks now, and today my phone lost all its charge, when i came home and charged it, it was stuck in the SAMSUNG boot screen. I first wiped the cache, still didn't past the boot screen, they i tried factory reset still didn't work. I then went on odin and flashed "S6 Edge Stock Firmware OG2 : https://mega.nz/#!jIw3hRBK!TLQfO7npj...GwWRUe6wx2zU9I" now its stuck on the screen thats says Samsung Galaxy S6 Edge. Any help would be greatly appreciated.
Thank you
Go to SamMobile and use the latest odin flashable fw for your device. You have to sign up but it is worth it
Sent from my SM-G925P using Tapatalk
vanitydb said:
So I had my phone(s6 edge rogers) rooted for a couple of weeks now, and today my phone lost all its charge, when i came home and charged it, it was stuck in the SAMSUNG boot screen. I first wiped the cache, still didn't past the boot screen, they i tried factory reset still didn't work. I then went on odin and flashed "S6 Edge Stock Firmware OG2 : https://mega.nz/#!jIw3hRBK!TLQfO7npj...GwWRUe6wx2zU9I" now its stuck on the screen thats says Samsung Galaxy S6 Edge. Any help would be greatly appreciated.
Thank you
Click to expand...
Click to collapse
Just find and download stock for your model. Flash in odin and it will be back on. The fw you just flashed must be incorrect. What fail message do you get in odin?