hello everyone ialso added screenshot as u can see the in screenshot screen my phone blinks several times and then start and sometime take long time to start...when i use ginger bread 2.3.6 my phone start perfectly but after flashing ics 4.0.3 my phone dont start perfectly it stcks on the screen as u can see in screenshot and blinks ...ive tried to reflash many times but same reslutt i also triied malaysian and indain firmware version but same result.....only prblem is booting anyone here pls help me
humzagr8 said:
hello everyone ialso added screenshot as u can see the in screenshot screen my phone blinks several times and then start and sometime take long time to start...when i use ginger bread 2.3.6 my phone start perfectly but after flashing ics 4.0.3 my phone dont start perfectly it stcks on the screen as u can see in screenshot and blinks ...ive tried to reflash many times but same reslutt i also triied malaysian and indain firmware version but same result.....only prblem is booting anyone here pls help me
Click to expand...
Click to collapse
how did you flash it?
odin v.185
i flashed using odin v1.85 select pda file .tar and then flash it my phone works fine but only problem in the booting sometimes start perfectly some time takes long time .....u can see in screenshot it blink on the same screen several times and then boot up ,,,,,i also flash gb 2.3.6 i9100 G it works fine for me only problem with ics 4.0.3 help me iam panciked
humzagr8 said:
i flashed using odin v1.85 select pda file .tar and then flash it my phone works fine but only problem in the booting sometimes start perfectly some time takes long time .....u can see in screenshot it blink on the same screen several times and then boot up ,,,,,i also flash gb 2.3.6 i9100 G it works fine for me only problem with ics 4.0.3 help me iam panciked
Click to expand...
Click to collapse
You sure you used an i9100G firmware when flashing ICS?
Related
Hi!
My i9100g is facing another screen related problem. Flashed it with a official firmware and colors got back and it was functioning well but suddenly i couldnt turn it on.
Then i realized that it starts normally but the screen is not functioning. It shows a column of different colors on the left side for sm time when i reboot it, but then it stays black!
I've no idea if it is a firmware problem(unlikely) or should i change the screen.
Help please!
Did you flash a G firmware?. Can you hey into download mode and flash a correct one.
Sent from my GT-I9100 using XDA App
I flashed the "G" firmware and it was working fine for days before this sudden black out :S
What exact firmware did you flash . It would be worth a reflash with a different firmware download .
jje
I flashed the latest firmware for Tunisia! i dont know if i will be able to flash anythg since it is totally black and i dont know if it gets into the boot mode or no!
sorry guys i post this thread here because no one is replying me
i have problem i have galaxy s2 i9100 G model running ics 4.0.3 xxplq official when i reboot my phone it stucks on sg2 logo and blink several times and then my phone starts and some time it take long time to start ....when i was using gb 2.3.6 my phone works fine but after switching to ics my phone works fine but iam having issue with booting which is so frustrating so pls guys help me out ???i shall be very thankful to you ...
humzagr8 said:
sorry guys i post this thread here because no one is replying me
i have problem i have galaxy s2 i9100 G model running ics 4.0.3 xxplq official when i reboot my phone it stucks on sg2 logo and blink several times and then my phone starts and some time it take long time to start ....when i was using gb 2.3.6 my phone works fine but after switching to ics my phone works fine but iam having issue with booting which is so frustrating so pls guys help me out ???i shall be very thankful to you ...
Click to expand...
Click to collapse
Even tho this is not the right place to post but i wanna try to help you out. Re flash your phone with the ROM again to get out of it. maybe tick Re-Partition in Odin but wait for somebody to confirm that.
javidali engg
hai..... i red u r thread.
1. first go to CWM.
2. wipe factory/cas. part.
3. wipe internal memory.
4.put in down. mode.
5. download rom from sammobile.com
6. open ODIN check auto rebooy & f.reset time.
7. in PDA select the extracted rom.
8. flash it enjoy.............:laugh::laugh:
or
USE ANDROIDADVICES.COM there is complete procedure to flash the rom & also for root
another big problem ?
iam in problem again when i flash my phone using odin i select pda and afterwars i select .pitfile and then i slect start and my procedure fail and my phone stuck on the screen with yellow triangle saying "firmware update encountered an issue " iam starting to panic pls help me out
humzagr8 said:
iam in problem again when i flash my phone using odin i select pda and afterwars i select .pitfile and then i slect start and my procedure fail and my phone stuck on the screen with yellow triangle saying "firmware update encountered an issue " iam starting to panic pls help me out
Click to expand...
Click to collapse
try this.. http://forum.xda-developers.com/showthread.php?t=1619571
Hello guys iam using ics 4.0.3 official xxplq when i power on my phone the first screen pop ups and we see wriiten galaxy s2 i9100 G my phone stuck at this written screen and blinks several times then my phone boot and work fime...how to fix it ......otherwise phone work fine...
When i use gb 2.3.6 there is no boot problem after switching to ics this problem begun i reflash it via odin using different firmware of ics but same screen....i also tried factory reset through cwm mode and also fix permission and also wipe dalvik cache same problem ....iam so panicked any professional developer can help me .....my model is s2 i9100 g......
NOTE: PHONE ALWAYS BOOT UP BUT TAKES TIME ....
SOMETIMES PHONE START PERFECTLY
humzagr8 said:
Hello guys iam using ics 4.0.3 official xxplq when i power on my phone the first screen pop ups and we see wriiten galaxy s2 i9100 G my phone stuck at this written screen and blinks several times then my phone boot and work fime...how to fix it ......otherwise phone work fine...
When i use gb 2.3.6 there is no boot problem after switching to ics this problem begun i reflash it via odin using different firmware of ics but same screen....i also tried factory reset through cwm mode and also fix permission and also wipe dalvik cache same problem ....iam so panicked any professional developer can help me .....my model is s2 i9100 g......
NOTE: PHONE ALWAYS BOOT UP BUT TAKES TIME ....
SOMETIMES PHONE START PERFECTLY
Click to expand...
Click to collapse
Dude. You've started four different threads for this one problem. Stop that.
Now, you say you have an i9100G. I asked you in your other thread (that you never replied to) if you were sure you were using an i9100G firmware. Well, you ALSO say above that you used XXLPQ. Well, that is a firmware for the i9100, and NOT for the i9100G.
Use an i9100G firmware and you will be good.
..sorry i misswritten i use XXLPQ FOR I9100G.. bro i downloaded from sammobile and selected i9100g model and downloaded sammobile xxlpq firmwarre for.i9100g model i also tried ksa and malaysian i9100 g firmware same result
Sent from my GT-I9100G using xda app-developers app
need help from master, my old gti5503 problem update, first try i jump from 2.1 to 2.3.7 n stuck at bootloader,just samsung logo and small text android and restart bootloader again and again, the second time, i try to enter download mode to reflash again now im stuck download mode and odin multi downloader wont work anymore like before, just waiting green bar full but nothing just i waiting hours than minute.. guy! i do wrong or not?or i try kill my old gti5503?
btw, im from malaysia, where can i get back stock rom? i try sammobile and samsung they update 2.2 only.. i hope you all help me out to recover back.. before i dying brick with hammer!
xperia p black enigma rom
no thanks guy, i fix it. before do flash, i update 2.1>2.2 using odin n original firmware then i flash custom rom from cwm and cm7 rom.
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Me too! Is there anybody who knows a fix??
sanjoyd4 said:
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Click to expand...
Click to collapse
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
sanjoyd4 said:
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Click to expand...
Click to collapse
http://www.mediafire.com/download/t...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part1.rar
http://www.mediafire.com/download/1...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part2.rar
odin 3.07
POST RESULT AFTER
B.R
ELGHANDOR
GT-S6102 After flash touchpad not working Solution.....!!
1. Flash with Odin307
2.file is S6102DDMF4_S6102ODDMF4_S6102DDMF4_HOME.tar.md5
Thanks in Arabic ...... شكرا
elghandor said:
http://www.mediafire.com/download/t...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part1.rar
http://www.mediafire.com/download/1...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part2.rar
odin 3.07
POST RESULT AFTER
B.R
ELGHANDOR
Click to expand...
Click to collapse
Thanks in Arabic .... شكرا
:good: :good:
I am too looking for solution
I also got the same problem can you tell me how to flash the mobile? As i am noob in this things! can you step by step instructions??
teiningen said:
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
Click to expand...
Click to collapse
teiningen said:
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
Click to expand...
Click to collapse
thanks , i was having the same problem so i followed your steps and it worked for me (GT-s6102B) but it was missing Arabic so i flashed S6102JPMA3_S6102OJPMA3_S6102XXMA2_HOME.tar.md5 (GT-s6102) and it worked and arabic was installed
many thanks again
so, google brings this up for the problem, but i couldn't get odin to flash the full package from sammobile to the 6102B, getting splitfus2 to work was a bit of a riddle (64biit version doesn't have necessary libraries for it in cygwin need 32bit version to work) anyways, i created a few of them thought it might help anyone else with this issue and who are less tech savvy. these worked for me, there are BR and Chile roms for the 6102B, flashing non B roms seem to leave touchscreen unresponsive after flashing the phone.
links:
S6102B_VJMA2_ZTRMA2_VJMA2_wipe_by_SplitFUS2.zip 136.7 MB
https://mega.co.nz/#!TlAg0DyT!jlhrrTmg-EMTLLrMAXlQucfrUceG_dxrYQs00kEz058
S6102B_VJMC2_CHOMD1_VJMC3_wipe_by_SplitFUS2L.zip 123.0 MB
https://mega.co.nz/#!yxZCFJRJ!FzHpXR3uD7YjGRhiHN2BsNktqw9E7KJE88F9WE9UmMA
S6102B_VJME1_CHOME1_VJME1_wipe_by_SplitFUS2.zip 122.2 MB
https://mega.co.nz/#!vtR23CwJ!Bek7_29TNu3RbRVUjHqGAYBLVEwgUHieg6nOb0aN1wc
S6102B_VJME1_ZTOMI1_VJME1_wipe_by_SplitFUS2.zip 135.3 MB
https://mega.co.nz/#!25YQyD6T!ygTbUseF4uWQCA1hzEkiOS8zT2YSH1QMXkLGdwh0F6I
take no credit, just used splitfus2 to split the tar.md5 from sammobile and uploaded them to mega. worked to fix the 6102B, it went to reboot loop, flashed a 6102 rom with which touch didn't work.
sorry to bring ancient thread up, if anyone has this issue google will make it an easy fix pointing to this thread as it did for me.