sorry guys i post this thread here because no one is replying me
i have problem i have galaxy s2 i9100 G model running ics 4.0.3 xxplq official when i reboot my phone it stucks on sg2 logo and blink several times and then my phone starts and some time it take long time to start ....when i was using gb 2.3.6 my phone works fine but after switching to ics my phone works fine but iam having issue with booting which is so frustrating so pls guys help me out ???i shall be very thankful to you ...
humzagr8 said:
sorry guys i post this thread here because no one is replying me
i have problem i have galaxy s2 i9100 G model running ics 4.0.3 xxplq official when i reboot my phone it stucks on sg2 logo and blink several times and then my phone starts and some time it take long time to start ....when i was using gb 2.3.6 my phone works fine but after switching to ics my phone works fine but iam having issue with booting which is so frustrating so pls guys help me out ???i shall be very thankful to you ...
Click to expand...
Click to collapse
Even tho this is not the right place to post but i wanna try to help you out. Re flash your phone with the ROM again to get out of it. maybe tick Re-Partition in Odin but wait for somebody to confirm that.
javidali engg
hai..... i red u r thread.
1. first go to CWM.
2. wipe factory/cas. part.
3. wipe internal memory.
4.put in down. mode.
5. download rom from sammobile.com
6. open ODIN check auto rebooy & f.reset time.
7. in PDA select the extracted rom.
8. flash it enjoy.............:laugh::laugh:
or
USE ANDROIDADVICES.COM there is complete procedure to flash the rom & also for root
another big problem ?
iam in problem again when i flash my phone using odin i select pda and afterwars i select .pitfile and then i slect start and my procedure fail and my phone stuck on the screen with yellow triangle saying "firmware update encountered an issue " iam starting to panic pls help me out
humzagr8 said:
iam in problem again when i flash my phone using odin i select pda and afterwars i select .pitfile and then i slect start and my procedure fail and my phone stuck on the screen with yellow triangle saying "firmware update encountered an issue " iam starting to panic pls help me out
Click to expand...
Click to collapse
try this.. http://forum.xda-developers.com/showthread.php?t=1619571
Related
hey I know there has been many threads about this but my case is unique and believe me i spent more than 6 hours searching the forums for a fix but no luck
I have a brand new Samsung Galaxy S2...tried to root it and it is stuck on boot loop
so i tried the steps written on the thread (do not post a new thread) but it is not working because i can not get inot recovery mode at all
I installed a stock xxki3 and still I can not fix the problem...
please help me
Can you post your device info.
Eg: I9100 international version
Sent from my GT-I9100 using XDA App
Yep, you're truly unique
Why not start with telling us your exact product and what happens when trying to get into both recovery and download modes.
my device is I9100 middle east version
it says when i remove the battery MODEL: GT-I9100G
problem description:
I turned on the device as soon as i bought it and it said 2.3.4
so I downloaded everything needed to root it and i started odien and everything went well....except for the fact that my galaxy got stuck with galaxy s logo screen and big yellow triangle at the bottom....and nothing else happen.... it says like this for hours and hours....
so i tried to go inot recovery mode...but nothing happens after doing the volume up+power+home ...still takes me to the previous screen with yellow triangle
tried download mode and it works fine....
i can go into download mode but not the recovery mode
please guys what do i do
mukalaaa said:
my device is I9100 middle east version
it says when i remove the battery MODEL: GT-I9100G
problem description:
I turned on the device as soon as i bought it and it said 2.3.4
so I downloaded everything needed to root it and i started odien and everything went well....except for the fact that my galaxy got stuck with galaxy s logo screen and big yellow triangle at the bottom....and nothing else happen.... it says like this for hours and hours....
so i tried to go inot recovery mode...but nothing happens after doing the volume up+power+home ...still takes me to the previous screen with yellow triangle
tried download mode and it works fine....
i can go into download mode but not the recovery mode
please guys what do i do
Click to expand...
Click to collapse
You need to download files to use for your specific phone and try again. You said you have a GT-I9100G, right? Well, where did you get the files you used to root?
You also said in the title of this post that you installed XXKI3. Well, installing XXKI3 and rooting are not the same thing. Which did you do? Root using an insecure kernel? Or install an XXKI3 firmware?
I'm going to go ahead and guess that you tried to flash a firmware intended for the regular GT-I9100, and not the GT-I9100G. These two phones have different hardware, so firmwares are NOT compatible.
Amirite?
first I tried to root it using insecure kernel...when it got stuck with galaxy s 2 logo screen with yellow triangle.... I searched all over the net for a solution and one of the solutions was is to flash xxki3 ....and I did that.... but it always fail.... I also tried to flash litening rom... but at the end...it fails at MODEM stage i believe....
Now all i want is to get my phone working....I dont wanna root it anymore....
please guys please help me
Stop flashing it.
You are doing more damage.
You have the 9100G, but you're flashing 9100 stuff
I am not flashing it anymore.... but I need a solution.... I want to know how can I get it back up and running
please help me
guys i found a 2.3.6 for my GT-i9100G
but still gives me fail red color in odien
please help me
You could try flashing this kernel.
http://forum.xda-developers.com/showthread.php?t=1369977
Sent from my GT-I9100 using XDA App
mukalaaa said:
guys i found a 2.3.6 for my GT-i9100G
but still gives me fail red color in odien
please help me
Click to expand...
Click to collapse
When you get the error, does it say failed red color? Of course not.
Tell us excactly the error you are getting! If you want our help give us all the information that you have.
What error message did you get? What are the steps you took?
Hi everyone
i live in north africa in algeria
i tried to flash my i9100G nwith the latest stock ics
everytjing went well unitil a big red fail apeared on odin
my phone doesn t turn on i got a pc with phone they told this is the sead screen
whatever please help me to slove this problem
& thanks for every one
I flashed ics xxlpq
no problem just flash the stock rom again but this time with pit
Hello,
please see this excellent repair guide:
http://forum.xda-developers.com/showthread.php?t=1448765
and let us know if it works for you.
can you give me a link for a stock rom with the pit file & thanks alot
nouninou said:
can you give me a link for a stock rom with the pit file & thanks alot
Click to expand...
Click to collapse
Did you even read the tutorial??, there clearly states where to download the files,
thats why you bricked your phone, you have to readdd everything and understand things before going up
I hope this options works for you !!
Hey, read this options to solve this problem. The second option Worked for me
1. if you´re phone doesn´t turn on and the screen not response maybe the problem is a hardbrick,
2.if you´re galaxy doesnt turn on but in the screen appears icons, the trouble is softbrick.
1.The solution for a hardbrick is a JTAG, this is a used method by Tecnics
2. The solution for a softbrick is a reinstall , just put the galaxy in download mode and install a official firmware with odin and done
after downloading a pit file it works
thank you very much
hello everyone ialso added screenshot as u can see the in screenshot screen my phone blinks several times and then start and sometime take long time to start...when i use ginger bread 2.3.6 my phone start perfectly but after flashing ics 4.0.3 my phone dont start perfectly it stcks on the screen as u can see in screenshot and blinks ...ive tried to reflash many times but same reslutt i also triied malaysian and indain firmware version but same result.....only prblem is booting anyone here pls help me
humzagr8 said:
hello everyone ialso added screenshot as u can see the in screenshot screen my phone blinks several times and then start and sometime take long time to start...when i use ginger bread 2.3.6 my phone start perfectly but after flashing ics 4.0.3 my phone dont start perfectly it stcks on the screen as u can see in screenshot and blinks ...ive tried to reflash many times but same reslutt i also triied malaysian and indain firmware version but same result.....only prblem is booting anyone here pls help me
Click to expand...
Click to collapse
how did you flash it?
odin v.185
i flashed using odin v1.85 select pda file .tar and then flash it my phone works fine but only problem in the booting sometimes start perfectly some time takes long time .....u can see in screenshot it blink on the same screen several times and then boot up ,,,,,i also flash gb 2.3.6 i9100 G it works fine for me only problem with ics 4.0.3 help me iam panciked
humzagr8 said:
i flashed using odin v1.85 select pda file .tar and then flash it my phone works fine but only problem in the booting sometimes start perfectly some time takes long time .....u can see in screenshot it blink on the same screen several times and then boot up ,,,,,i also flash gb 2.3.6 i9100 G it works fine for me only problem with ics 4.0.3 help me iam panciked
Click to expand...
Click to collapse
You sure you used an i9100G firmware when flashing ICS?
Hello guys iam using ics 4.0.3 official xxplq when i power on my phone the first screen pop ups and we see wriiten galaxy s2 i9100 G my phone stuck at this written screen and blinks several times then my phone boot and work fime...how to fix it ......otherwise phone work fine...
When i use gb 2.3.6 there is no boot problem after switching to ics this problem begun i reflash it via odin using different firmware of ics but same screen....i also tried factory reset through cwm mode and also fix permission and also wipe dalvik cache same problem ....iam so panicked any professional developer can help me .....my model is s2 i9100 g......
NOTE: PHONE ALWAYS BOOT UP BUT TAKES TIME ....
SOMETIMES PHONE START PERFECTLY
humzagr8 said:
Hello guys iam using ics 4.0.3 official xxplq when i power on my phone the first screen pop ups and we see wriiten galaxy s2 i9100 G my phone stuck at this written screen and blinks several times then my phone boot and work fime...how to fix it ......otherwise phone work fine...
When i use gb 2.3.6 there is no boot problem after switching to ics this problem begun i reflash it via odin using different firmware of ics but same screen....i also tried factory reset through cwm mode and also fix permission and also wipe dalvik cache same problem ....iam so panicked any professional developer can help me .....my model is s2 i9100 g......
NOTE: PHONE ALWAYS BOOT UP BUT TAKES TIME ....
SOMETIMES PHONE START PERFECTLY
Click to expand...
Click to collapse
Dude. You've started four different threads for this one problem. Stop that.
Now, you say you have an i9100G. I asked you in your other thread (that you never replied to) if you were sure you were using an i9100G firmware. Well, you ALSO say above that you used XXLPQ. Well, that is a firmware for the i9100, and NOT for the i9100G.
Use an i9100G firmware and you will be good.
..sorry i misswritten i use XXLPQ FOR I9100G.. bro i downloaded from sammobile and selected i9100g model and downloaded sammobile xxlpq firmwarre for.i9100g model i also tried ksa and malaysian i9100 g firmware same result
Sent from my GT-I9100G using xda app-developers app
Hi
My S3 is stuck on the initial screen that says Samsung Galaxy S3 GT-19300. It has been like that since I got up. If I press the on/off button nothing happens. If I press it for a long time it the screen goes of for about a second then the same screen appears. I tried taking the a battery out put it back in switched on and the same screen appears. When I connect the phone to my laptop my laptop does not recognise the phone.
Please help
Ally
anm1966 said:
Hi
My S3 is stuck on the initial screen that says Samsung Galaxy S3 GT-19300. It has been like that since I got up. If I press the on/off button nothing happens. If I press it for a long time it the screen goes of for about a second then the same screen appears. I tried taking the a battery out put it back in switched on and the same screen appears. When I connect the phone to my laptop my laptop does not recognise the phone.
Please help
Ally
Click to expand...
Click to collapse
Did you flash a rom from this forum? If so, your bricked.. This is the US version on Sprint (SPH-L710) Yours is the international version which can be found on this section here... http://forum.xda-developers.com/forumdisplay.php?f=1563.
We get a few I9300 people in here and seems to be more often then not. Anything in here that is flashed my render your phone nothing more then a paperweight. Check the forums before flashing anything. (incase you did) Thank you and have a nice day.
Moved to I9300
Now that you have already flashed the wrong firmware.. Try the following..
If you have CWM... Flash any intended for your device.. Wipe data factory reset.. Try booting
If that is not working then..
Download the stock firmware.. Flash it using Odin.. Boot into recovery and do a factory reset... Then see if your device boots..
sent from here, there, somewhere!!
Stock ROM location?
zoot1 said:
Now that you have already flashed the wrong firmware.. Try the following..
If you have CWM... Flash any intended for your device.. Wipe data factory reset.. Try booting
If that is not working then..
Download the stock firmware.. Flash it using Odin.. Boot into recovery and do a factory reset... Then see if your device boots..
sent from here, there, somewhere!!
Click to expand...
Click to collapse
Where can i find the stock rom for international GS-III? Honestly I have no idea where to find it. People say "download stock firmware" but they never put where it can be located. We need a firmware bible of some sort. Thanks if someone can help me out!
TheEnd94 said:
Where can i find the stock rom for international GS-III? Honestly I have no idea where to find it. People say "download stock firmware" but they never put where it can be located. We need a firmware bible of some sort. Thanks if someone can help me out!
Click to expand...
Click to collapse
Sam mobile .
http://www.sammobile.com/firmware/?page=3