hi good day my samsung s3 i9300 battery died on me and wouldn't power on because its stuck on the samsung s3 screen i've done all the hints an tricks i saw could someone who has the same issue as i and got through please help me i firstly factory restore it and it was still stock then when booted into the menu power up botton this it had an error with some csc then that had changed to imei problem after other attempts my problem right now is that i got the device on with 4.0.4 ics but a box comes up sometimes stating phone in factory or safety mode or sometthing like tthat and i have not backed up my imei and i have ariza but it would load onto the device but it wouldn't work because it automatically boots into factory/ safety mode how can i fix this also too if i try any other software like like jellybeans versions i get pass the s3 screen and sticks on the samsung with a boot loop please help me i really need my phone
Your post is to difficult to understand .
Start at the beginning flash stock JB rom via odin .
Then report back .
jje
Related
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
skycasaway said:
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
Click to expand...
Click to collapse
Seems like a sudden death issue.take it to the service center.they'll replace the board.
Sent from my GT-I9300 using xda premium
Its either SDS or user bricked .
Service centre is your only option left .
jje
yes it's SDS
JJEgan said:
Its either SDS or user bricked .
Service centre is your only option left .
jje
Click to expand...
Click to collapse
Thank's mate, i think it's SDS! Do you know any fix to this problem!? please help me:crying::crying:
skycasaway said:
Thank's mate, i think it's SDS! Do you know any fix to this problem!? please help me:crying::crying:
Click to expand...
Click to collapse
as said before: service centre
skycasaway said:
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
Click to expand...
Click to collapse
The thing is you flashed a version not meant for your GT I9300. You flashed the Verizon bootchain. Verizon GSIII is Samsung SCH-i535.
Different hardware than a i9300 (Qualcomm Snapdragon MSM8260A Dual core CPU, and the i9300 has a Samsung Exynos 4412 Quadcore). Sorry bro. If you still have download mode, you can try flash a i9300 bootloader. If not. you're dead.
*Urgent* Bricked S3(gt9300)? Accidentally wiped my s3 (in allianz rom bootloader screen) .* It then vomplrtely wouldn't work, so I used odin to put a stock rom on (via pda)* Success ! working completely fine until it lost power & will only ever get as far as the samsung logo when turned on. Need urgent diy help to get my phone working again,* I have tried a number of how-to's on fixung a bricked s3 via odin with no luck!* the error message is along the lines of no partion available & will fail no longer than 2 seconds into process. no matter what rom ; custom or stock Im unable to fix.* My guess would be that ive deleted whatever software in phone that would recognise a rom. Notes: I am competant in use of android just very good at making mistakes.* The only feature available is the download usb mode. Any help would be appreciated especially if it works, Im sure someone else has had the same problem!
Hi All,
Sorry if i am posting in wrong section .
My Galaxy S2 Gt-I9100 stuck in Boot loop , its happening all the time with out power on button pressed
I am able to go Recovery and download mode . Recovery mode Error Msg - Failure cant mount E:Efs
I have nandroid full back up restoring also not solving problem
I did Stock ROM flashing still issue there .
I visited Samsung store they said Mother board is gone . i am not sure they are telling truth .
Please help me what i have to do to make my S2 work again .
Thanks
Braj
erbraj said:
Hi All,
Sorry if i am posting in wrong section .
My Galaxy S2 Gt-I9100 stuck in Boot loop , its happening all the time with out power on button pressed
I am able to go Recovery and download mode . Recovery mode Error Msg - Failure cant mount E:Efs
I have nandroid full back up restoring also not solving problem
I did Stock ROM flashing still issue there .
I visited Samsung store they said Mother board is gone . i am not sure they are telling truth .
Please help me what i have to do to make my S2 work again .
Thanks
Braj
Click to expand...
Click to collapse
if have you cleared the root counter using triangle away and phone is in warranty giv to the service centre else try flashing the pit file change kernel and try restoring
erbraj said:
Hi All,
Sorry if i am posting in wrong section .
My Galaxy S2 Gt-I9100 stuck in Boot loop , its happening all the time with out power on button pressed
I am able to go Recovery and download mode . Recovery mode Error Msg - Failure cant mount E:Efs
I have nandroid full back up restoring also not solving problem
I did Stock ROM flashing still issue there .
I visited Samsung store they said Mother board is gone . i am not sure they are telling truth .
Please help me what i have to do to make my S2 work again .
Thanks
Braj
Click to expand...
Click to collapse
Sorry for quoting the op
Flash stock rom
Then go to stock recovery
Wipe data
Reboot..
Let me know if this works
Solved now
Hi all
thanks for all,
I got the solution , i Flash bootloader with odin.
Now my phone is stared but not getting able to register in Mobile network , seems my IMIE number is lost ,
I have old nandroid backup i am going to restore to store my IMIE
Thanks All for your help
Hate to break it to you, but restoring a nandroid isn't that likely to bring your IMEI back. If you're very lucky, flashing a stock rom for your country/carrier (if you're already running one, flash others) might bring it back if it's a case of temporary IMEI loss. If not, many mobile repair shops (not Samsung service centres) should be able to write the IMEI back to the device relatively cheaply. And if not, a Samsung authorised repairer can do it (or they may replace the motherboard which has already been suggested to you), but that can obviously be somewhat expensive.
Or if lucky op might find a efs backup somewhere in internal memory
i have a samsung galaxy s3 (gt-i9300) it was running a custom ROM when i got it but i wanted it back to the original samsung software, so i wiped the phone through recovery mode from the rom as the volume buttons are broke on my phone, after wiping it my phone will now only come up with the boot screen saying 'Samsung galaxy Slll GT-I9300' with a red exclamtion mark at the top left corner, is there anyway i can fix this my self as i need my phone working
You did more than just a factory reset, if you used format then you may have bricked it.
Try flashing the stock firmware for your country from sammobile.com, using Odin. Follow the guide in general forum sticky thread.
This happened to me too. Flashing the stock firmware solved it.
Better be careful with those format next time :laugh:
Well,
If your volume buttons are broken there is only one way to go to recovery to flash stock.
Buy an USB jtag from ebay.
Hello,
my galaxy note 2 (was running stock rom, latest SW) suddenly got bricked after battery reached 0%. When turned on was stuck on SAMSUNG logo then after some time being stuck on the logo the android guy poped up with some quick recovery menu (nothing helped - clearing cache, restoring factory settings).
Kies and reloading SW didnt help. I managed to bring it to life by installing recovery called TWRP using ODIN.
Unfortunately the IMEI is now 0049..... which is some generic one. Resulting unability to use the network.
How to fix this IMEI issue and get my original one back ?
Any idea or do I have to take it to service center where they have the service box ?
If I need to provide more data please ask.