*Urgent* Bricked S3(gt9300)? Accidentally wiped my s3 (in allianz rom bootloader screen) .* It then vomplrtely wouldn't work, so I used odin to put a stock rom on (via pda)* Success ! working completely fine until it lost power & will only ever get as far as the samsung logo when turned on. Need urgent diy help to get my phone working again,* I have tried a number of how-to's on fixung a bricked s3 via odin with no luck!* the error message is along the lines of no partion available & will fail no longer than 2 seconds into process. no matter what rom ; custom or stock Im unable to fix.* My guess would be that ive deleted whatever software in phone that would recognise a rom. Notes: I am competant in use of android just very good at making mistakes.* The only feature available is the download usb mode. Any help would be appreciated especially if it works, Im sure someone else has had the same problem!
Related
i really typed a big explanation regarding the problem, but i have no F*****G clue how it got erased. am already sad n pissed, well recently i tried to plug in my usb for my Galaxy Tab 7 running Overcome 7 ROM and Kernal 4.00.
but it dint get recognized at all, it hasnt happend before, but now i have tried every possible troubleshooting technique including kies troubleshooting and couple of em off google.
nothing has worked, and lastly i tried to install ChopSuey-v.9.1-SYNERGY_GODMODE-signed Kernal, coz for someone els it worked, but i totally bricked my tab, i used some android based software as odin doesnt know my tab exists, my hardisk is unable to mount and complete the factory reset all tat is failing.
right now no usb connection and my tab doesnt boot, doesnt recignize in download mode either!!!! please someone tell me what to do. i cnt take it to the service centre, am guessing theyll know its rooted and with custom rom thus voiding the warrenty.
it is stuck at the boot screen, and if i switch it off, it doesnt switch off just reboots , ad its stuck.
anybody any help?
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
site
zBurnXz said:
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
Click to expand...
Click to collapse
Where did you bought it?
China
your screwed the only thing you can do is download Chn_Chn Firmware from Samsungs website and flash it though odin. And that's the only fimrware that will work, unless you flash a custom bootloader through your sd card as then it will overwrite the encrypted boot.img allowing you flash any European Firmware.
hi good day my samsung s3 i9300 battery died on me and wouldn't power on because its stuck on the samsung s3 screen i've done all the hints an tricks i saw could someone who has the same issue as i and got through please help me i firstly factory restore it and it was still stock then when booted into the menu power up botton this it had an error with some csc then that had changed to imei problem after other attempts my problem right now is that i got the device on with 4.0.4 ics but a box comes up sometimes stating phone in factory or safety mode or sometthing like tthat and i have not backed up my imei and i have ariza but it would load onto the device but it wouldn't work because it automatically boots into factory/ safety mode how can i fix this also too if i try any other software like like jellybeans versions i get pass the s3 screen and sticks on the samsung with a boot loop please help me i really need my phone
Your post is to difficult to understand .
Start at the beginning flash stock JB rom via odin .
Then report back .
jje
Hi guys, I`m new to this forum and I wouldn`t be posting this topic if I found a solution on other forums. If anyone had a problem like mine, or saw a thread before, I would appreciate if you pasted a link to the solution, or gave some kind of advice.
First of all, I`m new to rooting, custom roms, etc., so I guess that whatever I did, it was my fault. I got this Galaxy S2 (GT-I9100) as a gift, and since i already had a phone, I wanted to take a risk and take a shot at installing a lollipop rom. I watched a few tutorials, it seemed simple enough, so i thought why the hell not, but in the process something went wrong...
Sooo... here is what I`ve done:
1.) Rooted my phone with VROOT
2.) Flashed custom recovery with ODIN. I`m not sure which version of CWM it was, 6.0.4.5 I think (the file is named CWM KitKar compatible-I9100). When I flashed CWM, my phone didn`t boot up. All I got was a Samsung Galaxy logo and a yellow triangle for a few seconds before my screen went black again, but I could still access both recovery mode and download mode using the combination of keys.
3.) And then I did what I think screwed up my phone. I thought maybe flashing a lollipop rom through recovery would solve the issue (maybe the recovery is incopatible with my older stock rom and it`s the reason why my phone isn`t booting). So i flashed CM12 from galaxys2root.com. It`s called CM12.1S ROM for Galaxy S2 GT-I9100 (Andorid 5.1)
Not only it didn`t solve my problem, I still can`t get my phone to boot (now I get a samsung logo and a yellow triangle, but screen doesn`t go black after a few seconds, I left it in this state till the battery ran out and still nothing). And on the top of all things, I can`t get my phone to recovery mode anymore, all I get is the yellow triangle. I can still get it into download mode, but it doesn`t connect with my PC anymore. It charges, but I can`t connect it with ODIN anymore. And the weirdest thing is, when I connect it to PC, my other USB port goes crazy and disconnect my USB Wi-Fi adapter
What went wrong? Any advice is highly anticipated. :good:
I have had my gs3 fixed before with the sdcard bootloader file but i cant get it to work this time. dose anyone know how to un brick a galaxy s3 I535 without jtag. i can not get into recovery, the phone will buzz when the sdcard with the bootloader is inserted, but it will not do anything else. windows dose not recognize it. please help i really dont want to send my phone out to a jtag service.
Follow the steps listed here http://www.sammobile.com/firmwares/download/31550/I535VRUDNE1_I535VZWDNE1_VZW/ and if this it is not the rom for your phone you can search it here http://www.sammobile.com/firmwares/
If it is bricked will never go into recovery , you will only be able to go in flash mode , the one listed in the step list. It is valid to all android phones , once the phone does not boot or gives random flashes on screen and etc and even won't turn off, you must press the buttons in the order to flash.