my HTC Flyer can't s-off with revolutionary it says "failed - Go have some lemonade "
i uninstalled HTC Sync but still the same problem
Get rid of htc sync
Did you enable USB debug
Did you uncheck Fastboot under power
mcord11758 said:
Get rid of htc sync
Did you enable USB debug
Did you uncheck Fastboot under power
Click to expand...
Click to collapse
yes i've done that but still the same ...its just reboot and stays on bootloader mode then it gives me that error
Did you install the Fastboot USB drivers provided in th s off thread
I believe that we had some problems getting revolutionary to work with that software version. If you can upgrade to one of the 2.27 versions you should be able to work from there.
Related
Hello everyone.
I have an HTC Hero (GSM) that:
1) Cannot boot at all, it is just showing the HERO logo
2) Cannot enter bootloader, it shows a red exclamation mark
3) Pressing trackball+back+power it can enter fastboot where it displays:
HERO CVT SHIP S-ON
HBOOT-1.76.0007 (HERO10000)
MICROP-010f
TOUCH PANEL-SYN0104
RADIO-6.35.15.11
Aug 4 2009, 19:43:30
FASTBOOT USB
<VOL DOWN> HBoot Mode
<MENU> Reset Device
When I connect it to the pc, it finds it as an HTC device but the "adb devices" command gives me nothing.
I am little dissapointed as whatever I have tried was pointless. And the problem is that I bought it from ebay not knowing that it does not work...
Any suggestions would be very much appreciated.
Thank you all in advace.
I managed to find the device in fastboot, typing fastboot devices.
But when I try to flash a new recovery I get the error "Failed (remote: not allowed)" ...
So I'm stuck... with only access to fastboot...
Perhaps You could try applying RRU, that could help i think.
BUT I'm not sure, so please research this subject
Hope You get Your hero working
brat.haneq
Thanks for your reply. I am looking into it now..
I found the solution!
Downloaded the RUU (ftp://xda:[email protected]_2.73.405.5_WWE_release_signed_NoDriver.exe) and while in fastboot usb run the wizard!
And the hero is working again!
I have a similar issue - PLEASE HELP
Hi,
My wife's UK GSM T-Mobile G2 has also developed a similar issue where, on boot it just hangs at the G2 touch splash screen. it did have villianrom on it but it now no longer boots.
I have managed to get it into fastboot where I can talk to it via the sdk but dont really know what to do from here to get it working. I tried to get the official RUU update from HTC and apply that but just get a USB connection error after clicking the .exe. I cant run any adb commands only fastboot commands.
I cannot even access the custom recovery. I think what has happened is somehow an update to the hboot has occured OTA and the phone can no longer run unsigned code. I think this as the hboot says S-ON which from doing reading indicates that the phone cant run unsigned code. (I've also tried to flash the amon-ra custom recovery via fastboot and it fails with an signature verify fail error also indicating this.)
The wife says she received a blank email and went to delete it and thats when the problem occured Is there any way for me to flash signed code to it via fastboot USB and if so, where can I get the files from?
Really desperate as the mrs is now without her phone!
Thanks in advance
Hello,
I have an EVO 3D that was having screen issues.
When I took it to the Sprint store they said my warranty was void for having ViperRom on the device.
The device was HTC unlocked and had ViperRom redline.
I asked them to not note that down and that I would come back tomorrow with the device back to stock settings.
I made a mistake though when I manually flashed a boot.img using adb.
Now I just get a blank screen when the phone starts. I am not able to enable USB debugging or disable fastboot.
Now I can get into the bootloader by using power and the down key.
Since the phone is in Unlocked Mode and S-ON I can't update through ADB without USB debugging or fastboot disabled.
Also any PG86IMG.zip on the SD card doesn't ask for an update when the phone is HTC unlocked
There is no bootloader option to relock the phone either.
If anyone can please help I would greatly appreciate it. I'm supposed to go back there today 9/18/2012 at 4PM PST
Are you able to get into fastboot on your phone? If so what you have to do is relock your bootloader first. Fastboot oem lock is the command. Your phone should pick up the pg86img file and update.
Jsparta26 said:
Are you able to get into fastboot on your phone? If so what you have to do is relock your bootloader first. Fastboot oem lock is the command. Your phone should pick up the pg86img file and update.
Click to expand...
Click to collapse
I can't relock the bootloader using any PC tools. I can get into the bootloader menu by pressing Vol- but since the phone give a black screen when I try to booth I cannot enable USB debugging nor disable fastboot. I think this is what is preventing me from being able to connect to the phone via USB... I'm working on that assumption however I could be wrong.
mateo650 said:
I can't relock the bootloader using any PC tools. I can get into the bootloader menu by pressing Vol- but since the phone give a black screen when I try to booth I cannot enable USB debugging nor disable fastboot. I think this is what is preventing me from being able to connect to the phone via USB... I'm working on that assumption however I could be wrong.
Click to expand...
Click to collapse
I can see when I turn the phone on it's actually functioning, just with a black screen. It still makes noises for receiving text and so on I just can't enable usb debugging and disable fastboot blind. I wonder if I found my HDMI adapter if an external display would work. That would be weird.
mateo650 said:
I can see when I turn the phone on it's actually functioning, just with a black screen. It still makes noises for receiving text and so on I just can't enable usb debugging and disable fastboot blind. I wonder if I found my HDMI adapter if an external display would work. That would be weird.
Click to expand...
Click to collapse
UPDATE: I figured it out that just by selecting fastboot and THEN connecting the USB I could get USB connectivity!
I'm trying to downgrade back to S-On using this method http://forum.xda-developers.com/showthread.php?t=1346200 but I can't get fastboot to work. Is anyone available to lend me a hand?
When I get into fastboot and try to run "fastboot flash hboot flyer_downgrader.nb0" it keeps saying 'waiting for device'
I'm running the command prompt as administrator and when i type fastbook devices nothing happens
Is your flyer in fastboot mode? Have you installed the correct drivers? Did you uninstall HTC sync? Have you tried multiple USB ports/cords?
check out XBMC the future of TV
http://www.xbmchub.com/forums/register.php?referrerid=5757
mcord11758 said:
Is your flyer in fastboot mode? Have you installed the correct drivers? Did you uninstall HTC sync? Have you tried multiple USB ports/cords?
check out XBMC the future of TV
http://www.xbmchub.com/forums/register.php?referrerid=5757
Click to expand...
Click to collapse
I did all of this except trying differant usb ports which did the trick. Very strange and I do appreciate the quick response!
I'm trying to relock my bootloader and unroot because I cracked my screen and wish to use my insurance to get a new DNA. My computer recognizes my phone when the phone is on, but when i boot into bootloader, the computer does the two beeps like a connection has been found but then is followed by 3 low pitched beeps like it failed. I'm S-ON. I can't do any work on my phone when in bootloader. When I try to enter the command "fastboot oem lock," it just says <waiting for device> I've installed the latest version of HTC Sync Manager so i'm sure the drivers are up to date.
HosstaLaVista said:
I'm trying to relock my bootloader and unroot because I cracked my screen and wish to use my insurance to get a new DNA. My computer recognizes my phone when the phone is on, but when i boot into bootloader, the computer does the two beeps like a connection has been found but then is followed by 3 low pitched beeps like it failed. I'm S-ON. I can't do any work on my phone when in bootloader. When I try to enter the command "fastboot oem lock," it just says <waiting for device> I've installed the latest version of HTC Sync Manager so i'm sure the drivers are up to date.
Click to expand...
Click to collapse
Try a different usb port. Uninstall HTC Sync, as I have seen sync cause problems before. Also try using a different cable if you have one. I have an old T-Bolt cable that will let you charge and transfer, but will not recognize phone in bootloader.
when in bootloader make sure that you are in fastboot and it says "fastboot usb"
OK I left my phone and when I went back and got it the touch screen wasn't working. I think the idiot there tried to put the operating system on his desktop because he was asking me if I had a disc with one on it. .......
When I restart while pushing vol down, the screen shows:
***UNLOCKED***
JEWEL PUT SHIP S-ON RL
HBOOT-2.09.0000
RADIO-1. 13. 11. 0830
OpenDSP-v31. 1. 0. 45. 0015
eMMC-boot
Oct 18 2012 15: 46: 20
when I try to fastboot
the screen flashs this :
SD CHECKING
NO GIFT FILE.......
LOADING ....[PJ75DIAG.ZIP]
NO IMAGE!
LOADING...[PJ75DIAG.nbh]
NO IMAGE OR WRONG IMAGE!
LOADING...[PJ75IMG.zip]
NO IMAGE!
LOADING...[PJ75IMG.nhb]
NO IMAGE OR WRONG IMAGE!
Then goes back to the HBOOT screen with the options
FASTBOOT
RECOVERY
FACTORY RESET
CLEAR STORAGE
SIMLOCK
IMAGE CRC
SHOW BARCODE
I have cleared storage, recovery, factory reset, reload bootloader, reboot,.......[I didn't document what I did or did't do , what order......I didn't keep record of what I did so all I can say LESSON LEARNED] when the phone boots up I have the lock screen but the touch screen doesnt work, just the power, vol +, vol-
I tried using a RUU my pc recognizes the evo , checks the version which is 3. 17. 651. 4 asks if I want to update to 4. 13. 651. 4 goes to screen that says rebooting to bootloader right after that the usb connection is lost and the screen says waiting on bootloader..... the phone screen is black with silver HTC logo in middle, the computer pops up with message that the last USB device you connected to this computer has malfunctioned and windows does not recognize. The RUU shows error 171 no USB connection and exit button. The USB connection is gone, the black screen HTC logo stays until I restart the phone then I have lock screen no touch screen workings and usb connection working and message at top of screen usb file sharing . I did download minimal fastboot adb and when I tried to use it, I could get the phone to show fastboot usb, but it didnt have the usb connection active. It says usb file sharing, is USB debugging On? ADB does't find device.........I am unlocked S-on and can't discern what I did to do and in what order. I am getting that I need to get S-OFF, I tried RUMRUNNER but adb doesnt reconize device so.......If I try to fastboot with out the sd card in it, it doesn't seem to run bootloader, from HBOOT I choose fastboot, goes to screen, I choose bootloader and it just goes back to HBOOT screen. Please advise.
To run a RUU on your phone you will need to relock your bootloader. You need to install HTC Sync on your PC, which will install needed drivers to your computer. You can run a RUU from the bootloader while connected via Fastboot USB mode. For more info on RUU's and how to run one hit the top link in my sig and read the RUU section. That guide also includes a link to an article on how to set up ADB on your PC.
HTC Can't Connect, ADB doesn't find, PC Does
Magnum_Enforcer said:
To run a RUU on your phone you will need to relock your bootloader. You need to install HTC Sync on your PC, which will install needed drivers to your computer. You can run a RUU from the bootloader while connected via Fastboot USB mode. For more info on RUU's and how to run one hit the top link in my sig and read the RUU section. That guide also includes a link to an article on how to set up ADB on your PC.
Click to expand...
Click to collapse
I read the RUU section, well I read all of it, so I understand that I have to relock bootloader to run a RUU so I installed HTC Sync and sdk. When I connect data cable, my pc opens file viewer and I can look at files on phone. When restart to HBOOT, I lose connection to pc with a message saying usb device has malfunctioned. When I fastboot and go down to reboot or reboot bootloader, I get fastboot usb, but when I try to use adb or fastboot they are waiting on device and never does find it.. I downloaded the usb driver didn't help. HTC Sync says to unlock screen and/or accept request which I can do neither since screen is nr. Is usb file sharing on and dev debug off why this is happening? If so what can I do?
USB file sharing and debugging mode won't matter when using Fastboot commands. Are you on Windows 7, 8, 8.1?
Windows 8.1
Windows 8.1
It's a driver issue with 8.1. Google it & you'll find a few guides to help you get your PC set up properly.