So I think I may have screwed myself. I was following this guide for changing the battery icon to 1% increments instead of 10%, went to reboot and now my photon is stuck on the Motorola Dual Core technology screen. I can't get adb to recognize it and its been stuck like this for a good 20 minutes. Any thoughts? Am I screwed?
i had this exact problem 3 nights ago
Download rsdlite 5.3.9 , 5.0 would not support the phone.
download either 198-6 or 198-7 sbf found in the devolpment sections
you can flash it with the rsdlite program by booting to rsd, Vol up + power
make sure you have full battery and it will reboot a couple times on its own at the end i had to do a manual reboot but it told me i needed to. your phone will reactivate on reboot
I've been trying to boot to RSD but it seems stuck on that as well.
EDIT: sorry I guess I didn't realize I need RSDlite to make this work. I found a youtube video with links on how to flash this sbf so hopefully this will work. Downloading the 400+mb sbf file now (slow internet so its gonna be ~40 minutes), but after that I'll try flashing.
Are you unable to boot into rsd mode even after pulling the battery? If so then I'm not sure that you will be able to use the sbf file to go back to stock. It's worth a try either way though I suppose if worst comes to worse you can take it back to sprint.
SNAAAAKEE said:
Are you unable to boot into rsd mode even after pulling the battery? If so then I'm not sure that you will be able to use the sbf file to go back to stock. It's worth a try either way though I suppose if worst comes to worse you can take it back to sprint.
Click to expand...
Click to collapse
I didn't realize I needed RSDLite to push the SBF (I really had no idea what rsd mode was). I managed to find a video from qbking on how to unbrick the Photon and follow that. It worked and I am back to where I was.
Thanks guys and a special thanks to Shabbypenguin who helped talk me through the ordeal a bit on IRC.
So I got my Photon up and running again but...I can't make calls with it. I tried to Update profile/Update PRL just to see what would happen but...they both result in force closes on settings and bringing me back to About Phone. I'm going to try and have Sprint reactivate it but...anyone have any thoughts?
You may want to do a factory data reset before trying to flash the sbf again via rsdlite.
Sent from my MZ601 using XDA App
So I managed to reactivate my phone with Sprint. However now I have no data (unless roaming). I read that I may have to update PRL in About phone to get my data back but...whenever I try to update PRL or profile it force closes.
Anything I can do to fix this? I restored everything I had frozen via titanium backup but perhaps something is missing here that is force closing those two?
Durp. Factory reset solved this issue. Data/phone capabilities restored and customization process, take 2, begins now.
Thanks to those that helped again and hopefully this thread will help someone should they soft brick their photon.
.cruiser said:
You may want to do a factory data reset before trying to flash the sbf again via rsdlite.
Sent from my MZ601 using XDA App
Click to expand...
Click to collapse
I am having similar issues as described in this thread with flashing my Photon (back to stock). I forgot to factory reset before I began the flash process and now I can't get access to the O/S so my question is how do you do a factory reset without going into the Android O/S? Can you do this from fastboot/nvflash/RSD?
Related
So here is my problem, i've wiped my phone so many times to try out every rom/kernel that is posted. The last time i clicked the wrong file to sbf to unlock it and ended up flashing the 235 electrify pudding sbf. (had them all in the same folder...dumbass)
I was able to get rid of the 108 svf error by flashing the boot.img back to the photon ones via fastboot. But still would get the 106 anytime i went to try and flash the sbf.
I've tried in Ubuntu as well as windows 7 to flash it back but nothing has worked since it wants a 235 sbf, and it locked the bootloader.
So I said screw it and tried flashing the electrify 2.3.5 and it loaded up and everything, but i'm stuck on the activation screen and cant get past it. (tires to activate through Verizon)
The 2.3.5 update also removed the bootloader unlock in fast boot even with the id number.
So as easy as it was to flash it right to the electrify sbf, i think once the sprint 2.3.5 sbf is out i should be able to go back. Or once an unlock is found to unlock the bootloader, i can flash the files via fastboot.
I haven't tried messing around with nvflash, since my computer doesn't show the apx when its in that mode.
Update: Was able to bypass activation by booting in to "Boot Android {No BP}" like on the droid x2.
Did you get bootstrap working?
TrojanZulu said:
So here is my problem, i've wiped my phone so many times to try out every rom/kernel that is posted. The last time i clicked the wrong file to sbf to unlock it and ended up flashing the 235 electrify pudding sbf. (had them all in the same folder...dumbass)
I was able to get rid of the 108 svf error by flashing the boot.img back to the photon ones via fastboot. But still would get the 106 anytime i went to try and flash the sbf.
I've tried in Ubuntu as well as windows 7 to flash it back but nothing has worked since it wants a 235 sbf, and it locked the bootloader.
So I said screw it and tried flashing the electrify 2.3.5 and it loaded up and everything, but i'm stuck on the activation screen and cant get past it. (tires to activate through Verizon)
The 2.3.5 update also removed the bootloader unlock in fast boot even with the id number.
So as easy as it was to flash it right to the electrify sbf, i think once the sprint 2.3.5 sbf is out i should be able to go back. Or once an unlock is found to unlock the bootloader, i can flash the files via fastboot.
I haven't tried messing around with nvflash, since my computer doesn't show the apx when its in that mode.
Update: Was able to bypass activation by booting in to "Boot Android {No BP}" like on the droid x2.
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Was able to root it via the photon torpedo, even though it says it fails, it wont install the apks from the root program but it is rooted. Just downloaded them off market and ran root updater.
Was able to get system recovery to install and booted in to it just fine. but it soft bricks after i install the skiny4g zip file, boots up the first time all the way to the US Cellular boot screen then resets, and then loops the Moto Dual Core icon. Tried the "Boot Android {No BP}, and same effect, also tried just wiping cache and then wiping the system and still the same results.
Update: Finely got Skinny4G to boot, took 3 tires and the last time i wiped system 2 times in mounts and storage, shows up as sprint and 2.3.4 and its looking at sprint wireless towers, just trying to activate it now.
Phone activated on sprint, 3g works with out any issue, but the wifi and 4g is dead, now i just have to wait for the electrify unlock or 2.3.5 sbf for sprint.
Hey man, i did the same i flashed 235pudding by mistake, so i tried using the 2.3.5 sbf form electrify and it was going great until !switching phone to bp.. something else" then it stopped on 99% and failed to flash... i waited for 5 minutes just to be sure nothing else happened... it didnt
Then i pulled battery and powered the phone again this time it didnt said the "failed to boot 2" but it didnt started it just sits on the motorola dual core logo.
I pulled battery and powered it trying to go into RSD mode and it just doesnt appears :O
I pulled battery and tried to go into fastboot and doesnt appears either.... i just can turn it on and it sits on moto logo.... any help ideas? Tnks
__________________________________
Edit: I pressed vol up and down while power button and it finally appeared RSD mode.... but battery too low to flash, im gonna charge the battery on an external charger for an hour and report later if RSD lite actually recognizes the device.
_____________________________________
YEAH! After charging battery the process completed, im an international user so its not very imporanto to me Spront or US cellular, the phone boots good without my sim... but as soon as i put it in it says " modem did not power up (0)" so...
Does Anyone knows where to go form here?
Thanks
jokersax11 said:
Did you get bootstrap working?
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Bootstrap install just fine after rooting.
Unbrick yourself
I want to thank Koriotto and everyone else who suggested and or tried the idea of flashing a 2.3.5 rom to save our backs. Now to everyone who has flashed 2.3.5 electrify pudding into their photons:
Disclaimer:
1°This will bootlock your phone until a working pudding for 2.3.5 is released.
2°I have no idea whether this will work with sprint whatsoever since I can't try it out being an "international" user, but at least your phone won't be a total brick. However, my common sense tells me this most likely won't work with Sprint.
3ºThere is a leaked Photon 2.3.5.sbf lurking amid devs, but as far I know it hasn't been released to the public yet. However, in case you do get ahold of it, please provide me the link so that we can try it out and see if we can help the Sprint folks get back to a stock Sprint rom. "Internationals" most likely won't care.
1°Try to get as much juice as you can into your battery.If you can, use someone else's fully loaded battery or charge yours with an universal battery charger (extremely cheap and easy to find). Your phone won't charge while in rsd or fastboot mode.
2°Download and install the appropriate Motorola drivers (x32 or x64 according to your windows flavor)
3°Download Electrify 2.3.5 SBF from here: https://rapidshare.com/#!download|8...19.0-19-release-keys-signed-USC-US.rar|530398
4°Get your device into RSD mode. If your loader says RSD mode, go to step 5. If your loader says nothing or is stuck on "Flashboot", don't worry. Power off your device and then press Volume down + power. The phone will turn on and then off. Then power on normally and you will be on RSD mode. If this doesn't happen the first time you try it, just keep repeating the forementioned process until you get into RSD mode.
5°Flash the SBF file you downloaded with RSD Lite
6°Live to win!
UPDATE: link from Team US Cellular seems to be down. I'll personally upload the file once I get home tonight.
Yeah. Praise US Cellular.
Sprint can I haz 2.3.5 yet?
Thanks so much for unbricking my Photon
Worked like a charm for mine !
Thanks !!!!
firtermish said:
I want to thank Koriotto and everyone else who suggested and or tried the idea of flashing a 2.3.5 rom to save our backs. Now to everyone who has flashed 2.3.5 electrify pudding into their photons:
Disclaimer:
1°This will bootlock your phone until a working pudding for 2.3.5 is released.
2°I have no idea whether this will work with sprint whatsoever since I can't try it out being an "international" user, but at least your phone won't be a total brick. However, my common sense tells me this most likely won't work with Sprint.
1°Try to get as much juice as you can to your battery.If you can, use someone else's fully loaded battery or charge yours with an universal battery charger (extremely cheap and easy to find). Your phone won't charge while in rsd or fastboot mode.
2°Download and install the appropriate Motorola drivers (x32 or x64 according to your windows flavor)
Click to expand...
Click to collapse
the download link doesn't work,would u plz give u a new download link,I need to unbrick my phone.
Thank u.
motiam4 said:
the download link doesn't work,would u plz give u a new download link,I need to unbrick my phone.
Thank u.
Click to expand...
Click to collapse
Original link went went down. Already corrected with one from Team US Cellular. Happy downloading
any updates with unlocking the bootloader for 2.3.5 flashed from sbf?
Hi,
I got a refurb Atrix 4G from AT&T today in the mail to replace my Atrix 4G that had the wifi/bluetooth radio go bad.
Anyways, I attempted to root this new Atrix using the method from here: Atrix Forums root 4G using fastboot.
If you'll note, those instructions omit the 'chmod' command that is found on the instructions here on xda (I downloaded the preinstall.img from xda, since the other link was bad)
After I rooted, (but I have not rebooted) I transferred using USB mass storage everything that was on my old atrix (I told windows to overwrite everything during the copy)
I also used ADB to push Titanium Backup APK.
After that, the phone restarted unexpectedly.
The phone would startup and restart partially through the startup, occassionally I would see the unlock screen for a moment, but usually it would constantly cycle through the Motorola animation then turn off with the green led, then back on.
I figured I messed up the root or something, so I used the Android Recovery to wipe my user data and cache, that didn't work, so I used RSD Lite and pushed the signed ATT 4.5.91 SBF to the phone. I wiped the user data/cache using Android Recovery again after the sbf. Still the same reboot cycle.
Anything else I can try to revive it?
forum.xda-developers.com/showthread.php?t=1421261
This, then SBF again (with the latest RSD lite).
Still broken?
If you aren't unlocked, do so, then maybe try a fruitcake.
PM me with issues.
I got errors from fastboot when it erased system/boot/webstop/preinstall... Trying RSDLite again.. then unlock, will report back.
I erased partitions (with errors see above), rsd'd the OTA locked sbf again, then I unlocked, still rebooting.
I'm thinking it's something hardware-related since the phone will get all the way to the unlock/motoblur setup screen after a battery pull. but will only do the moto-logo after that.
Can I undo the unlock if I need to send it back? It's not clear to me if using RSD lite with the OTA locked signed ATT 4.5.91 sbf will brick it..
tuxp3 said:
Can I undo the unlock if I need to send it back? It's not clear to me if using RSD lite with the OTA locked signed ATT 4.5.91 sbf will brick it..
Click to expand...
Click to collapse
Can't lock it again.
Great, will ATT take it back? I've only had it a few hours and the problems began before I unlocked.
Dunno. I personally haven't read any reports of phones being rejected for warranty because of an unlocked bootloader, but since you only just got it as a replacement for another one, they may scrutinize you more.
Does it seem like it could be a battery issue? I'd like to think it's not, but my old phone had a similiar rebooting problem (although it would reboot well after startup)
After countless hours of research, I decided to unlock my bootloader and to root my Motorola Atrix 4G. With success, I was happy to have everything working and installed the Darkside Custom Rom. I let a friend borrow my phone, and they saw the AT&T system update and they decided to install it. They bring back the phone and the system update has finished and was installing. The phone powers off and starts to install the update. 10% into the install, it stops, and I got the little green droid man with the /!\ behind him. I take out my battery, place it back in after 30seconds. It powers on, boots up, powers off and tries to load the update again. I restart it, but this time quickly going into RomManager and starting it up in Recovery Mode. I go to restore the phone using the file I backed up from the TitaniumBackUp app, everything backs up except the system. I plug my phone into my laptop, and everything is in the folder. I performed a system/factory reset, downloaded the last Gingerbread update, but nothing helps. Anything I try to load it says "Installation aborted". No matter if it's the original update or a ROM I download. Looking up other forums, I notice others that have downloaded the Darkside ROM have had the same; if not similar issues. I apologize for the length of this message, but I wanted to put in as much detail as I could so you know exactly what the issue is. I look forward to hearing from someone, and thank you in advance!!!
You probably need to sbf it back to a stock ROM and start over. I had a similar problem when I first got my Atrix and the AT&T update first came out. I had already rooted it and didn't unlock the bootloader yet. It tried to update and bricked the phone. Got AT&T to give me another though as I had just got the thing.
nickdeal said:
You probably need to sbf it back to a stock ROM and start over. I had a similar problem when I first got my Atrix and the AT&T update first came out. I had already rooted it and didn't unlock the bootloader yet. It tried to update and bricked the phone. Got AT&T to give me another though as I had just got the thing.
Click to expand...
Click to collapse
Thanks a ton! How would I go about doing that?
You need to download motorola RSD app to you computer. Search XDA for stock firmwares and download one. You will then need to use the button combo to get in to RSD. Connect the phone to your computer and make sure it recognizes. I had an issue where one of my laptops would not recognize the phone for anything. I had to use a different laptop. Once it's done you should be back to stock. The bootloader should be unlocked still. Just root and flash your ROM of choice.
Sent from my MB860 using XDA App
Please I need answers to this issue, not people blaming me for being such a noob. I reprogrammed a Verizon Droid Razr for my colleague here in Nigeria, we both work for a CDMA network. The phone was fine, voice, text and data working until yesterday he told me the phone lost network. I asked him what happened before then and he told me he did an update (the ICS update), so everything went back to Verizon defaults and I needed to reprogram again. I got to reprogram it today but there was no data so I figured I would go back to GB 6.12.181 which the phone was on before the update. I chose DroidRAZR Utility 1.6 which I have on my laptop to do the job. After this my woes began. The phone now stops at the Motorola logo and after that goes blank. I tried again but it was the same response, and I discovered that the recovery changed too, and where I should hit both volume buttons to get the option to wipe all I see is automatic update inside recovery. I tried to remove the sdcard, but I guess the update file he received is in the internal storage. How can I get the phone working again, whether on ICS or GB, whichever would work. Or do we have a total brick? Please I need urgent answers. Thank you all.
Pls people, Help Me!
After Upgrading to ICS you CANNOT downgrade back to 2.3 again, part of ICS does NOT allow downgrading, if its CDMA and you can get to bootstrap you could flash the ROM again, use the sdcard in another device to copy the rom, but it MUST be ICS you CANNOT install GB anymore
lashton said:
After Upgrading to ICS you CANNOT downgrade back to 2.3 again, part of ICS does NOT allow downgrading, if its CDMA and you can get to bootstrap you could flash the ROM again, use the sdcard in another device to copy the rom, but it MUST be ICS you CANNOT install GB anymore
Click to expand...
Click to collapse
Thanks for your reply lashton. Please can you point me to a guide on how I can restore the phone to ICS. It is stuck on Invalid Flash Mode now and the battery is low, but I want to make a factory cable to use tomorrow and see if I can get the phone working again. I just need to know this is possible to restore to ICS.
Thanks.
What you have is soft brick. And yes you will be able to go back to ics but now gingerbread. Look online there are plenty of people that have soft bricked their phones thinking they could just go back to GB. Lol including me. Happy digging! =)
Sent from my DROID RAZR using xda app-developers app
Chuckleb0ne said:
What you have is soft brick. And yes you will be able to go back to ics but now gingerbread. Look online there are plenty of people that have soft bricked their phones thinking they could just go back to GB. Lol including me. Happy digging! =)
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
Please dear sir Chuckleb0ne, kindly guide me on how to do this since you have experienced it before. I have only till tomorrow to get this working as the phone has my friend's official company line on it, he must be able to use it for calls tomorrow. Down on my knees, tears streaming down my eyes... pleading for help...
OK. I managed to construct a factory cable and it supplied power to the phone, so far so good. I tried to use Droid Utility 1.7 to unbrick (option 2) but it didn't work, I mean the fastboot flash went through but I still cannot go further than the Invalid Flash Mode screen, no matter what. I can't even go into recovery. That's a major issue, I think. If I could get into recovery I could sideload the ICS zip I copied on the sdcard with the Utility tool. I next tried option 1, which is Prepare for sideloading ICS on any GB. It didn't work either. Please people, what next before I go crazy. We do not have Verizon here so their support is out of the question, or even returning the phone. I must fix this, with your help, because I have run out of ideas here. Help needed!
Try to boot through BP Tools. The phone must be unplugged. If you can reboot that way then just rewrite the boot .img, I want to say its option 9? Kinda sounds like what happened with my phone, but after I saw the dead android with the door open I believe I could still get into stock recovery and side load .211.
Guys, I got it back on. I used DroidRazr Utility 1.6, 1.7 and this file - Blur_Version.6.12.181.XT912.Verizon.en.US.zip, all three in combination. the blur file on my sdcard, fastboot restore to 181 with Utility 1.6, move into recovery, wipe data and cache, fastboot 211 boot.img from Utility 1.7, back to recovery, flash the blur file on sdcard... ladies and gentlemen, we have a working Droid RAZR on ICS 211. Happy mode activated...
Nice job ezeuba! I'm trying to find a way to get my RAZR back to GB because I HATE ICS. I've been using it for 2 days and I want to smash my phone. I keep finding people saying that it is not possible, although I have found 1 or 2 references stating that it may be possible but is very risky. I am willing to take any risk at this point as my phone is pretty much useless to me now anyway and it is at very high risk of being utterly destroyed. It amazes me how fast you can go from love to hate with a device. This fiasco reminds me of the day I "upgraded" from Windows XP to Vista. At least Microsoft left me the option to go back...
Question: When you did "fastboot restore to 181 with Utility 1.6", were you back to a working GB 181? Were you forced to move "up" to ICS or was it your choice? Thanks in advance for any information!
See! Once you do a little digging you come up with a solution. And now you probably feel incredible for doing it yourself.
Sent from my DROID RAZR using xda app-developers app
emsjo said:
Nice job ezeuba! I'm trying to find a way to get my RAZR back to GB because I HATE ICS. I've been using it for 2 days and I want to smash my phone. I keep finding people saying that it is not possible, although I have found 1 or 2 references stating that it may be possible but is very risky. I am willing to take any risk at this point as my phone is pretty much useless to me now anyway and it is at very high risk of being utterly destroyed. It amazes me how fast you can go from love to hate with a device. This fiasco reminds me of the day I "upgraded" from Windows XP to Vista. At least Microsoft left me the option to go back...
Question: When you did "fastboot restore to 181 with Utility 1.6", were you back to a working GB 181? Were you forced to move "up" to ICS or was it your choice? Thanks in advance for any information!
Click to expand...
Click to collapse
To answer your question first, no I didn't have a choice to stay on Gb or move up to ICS. I only did fastboot to 181 with Utility 1.6 in order for the phone to even boot up to recovery. Prior to that I only had "Invalid Flash Mode" error, no recovery, nothing. So, after fastbooting 181 I got to recovery, wiped data and cache, went back to Utility, 1.7 this time, and flashed boot.img for 211, then went back into recovery and sideloaded the downloaded 211 update file on my sdcard. After that could I get full boot to ICS on the phone. No need dreaming of reverting back to GB, it's not possible, at least for now with a locked bootloader.
Chuckleb0ne said:
See! Once you do a little digging you come up with a solution. And now you probably feel incredible for doing it yourself.
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
You are right. Nothing a bit of research would not solve, if you are really determined to get it to work. It was your assurance that it was certain to work that fired me up. I was afraid the phone was dead and about to be buried.
Thanks.
Thanks ezeuba! Fortunately ICS is starting to grow on me. I was able to load the old Gmail app which was my main issue and find some other workarounds for various other issues.
Hello. I have a photon that was rooted and unlocked and all that. The thing is it somehow got the newest Motorola update. The question i have is can i reroot it. I would love to be able to run a different OS than just the stock one. Can someone help me here or do i have a nice paperweight
yes you can re-root it using the torpedo method. but unfortunately no unlocking at this time
foxsdaddy67 said:
yes you can re-root it using the torpedo method. but unfortunately no unlocking at this time
Click to expand...
Click to collapse
What he means is, you need to be unlocked to install a custom rom with custom kernel and you can no longer unlock. You have two rom options while still locked, but both are based off the blur you already have. You can still root, though.
from what I understand you can use boostrap recovery to install ROMs. i've yet to try it myself but others have used it
foxsdaddy67 said:
from what I understand you can use boostrap recovery to install ROMs. i've yet to try it myself but others have used it
Click to expand...
Click to collapse
Only roms without a custom kernel assuming you are still locked while using it.
Sorry.. but with "locked" you say.. bootloader, o gsm? In general at forum.. lock refers bl?
Sry, for my english :\
Thanks!
Enano08 said:
Sorry.. but with "locked" you say.. bootloader, o gsm? In general at forum.. lock refers bl?
Sry, for my english :\
Thanks!
Click to expand...
Click to collapse
Yes I'm referring to your bootloader. The gsm lock you are referring to only exists in the united states.
thanks for the info guys, well i did get the phone rooted and super user restored, see the thing is the phone was flashed and programmed for page plus, its still running on page plus service but i had 2 problems one being the nag screen to activate the phone for sprint and its constantly in roaming, i called page plus and they say yeah that will happen and no i wont be charged for it, i would be all happy if i could get the roaming off, i did however get rid of the sprint activation by deleting a apk called SprintOMADM,apk. now im not totally sure i need that apk or not but its gone now and i have no nag screen to activate it, it still makes calls just fine but im not sure im totally getting all my incoming phone calls or any notifications for voice mail, any sugestions on how i might be able to get rid of some of this stuff, like i said it was flashed rooted and unlocked before, i did use when i first had it that remote squad software but now it says it cant even read the phone, i was also told by them its probably that awsome new update 2.35. thanks alot again for your responses and ill keep popping in and out of here to see more responses
well disreguard the last post, I had some app downloaded on my phone used to flash roms... well basically what happened i restarted my phone and the app booted before the phone started and it said flash rom from zip file so i selected one that i downloaded here, and thinking it wouldnt work i selected it and hit ok, well it worked alright now the phone says Failed to boot 2, and just shows starting in RSD mode, now im screwed, I shouldnt have done that, I figured it was locked and wouldnt work now the phone is broke how can i get it back just to stock the way it was or am i totally screwed
mamba316 said:
well disreguard the last post, I had some app downloaded on my phone used to flash roms... well basically what happened i restarted my phone and the app booted before the phone started and it said flash rom from zip file so i selected one that i downloaded here, and thinking it wouldnt work i selected it and hit ok, well it worked alright now the phone says Failed to boot 2, and just shows starting in RSD mode, now im screwed, I shouldnt have done that, I figured it was locked and wouldnt work now the phone is broke how can i get it back just to stock the way it was or am i totally screwed
Click to expand...
Click to collapse
What rom did you flash and what little application did you use to flash it with? You're probably not screwed, we just need a bit of information on what steps you took.
Acvice said:
What rom did you flash and what little application did you use to flash it with? You're probably not screwed, we just need a bit of information on what steps you took.
Click to expand...
Click to collapse
well when i got that awsome update 2.35 from my son clicking yes to it, i tried just about any roms to get the phone back, first it was the electrify rom which i later find out dumb mistake on my part, anyway now and i mean right now i flashed the phone with rsd lite using the electrify rom 1FF-sunfire-user-2.3.5-4.5.1A_SUN_USC_19.0-19-release-keys-signed-USC-US..... from there i rooted the phone using the torpedo method, then i installed busybox and i forget which method i used but anyway it was all done in fastboot, once i got all that installed i downloaded a apk file system recovery which is MOTODX2_Bootstrap_signed.apk. plugged in the charger and booted up the system recovery or the bootstrap which ever you call it, and went into advanced and did a dalvik wipe i even hit fix permissions, i then hit go back and did a data- factory clear wipe, then went into install zip from sd card and i first used MOF.2.3.5.ish,v1.4.zip and that installed fine the problems i had was sometimes when i would do that i would get failed to boot 2 screen but i just used the unbrick zip that i downloaded here if anyone wants the name or link let me know, anyway.. once booted up with the MOF ish zip it would load fine but wouldnt save any settings or find any APNs or connect to any wireless networks in my house, but the wireless problem was clear it said error on it, so i knew the problem on that was it wasnt working derr. So this story is getting long now. anyway i then rebooted and turned on the bootstrap slash system recovery utility, and i installed first 2.3.x_libmoto_ril.so_198_7.zip and it aborted the install and failed. i then tried the next one in line which was 2.3.x_libmoto_ril.so_254_12.zip and that one installed fine so i rebooted and i got the failed to boot 2 screen and i did the unbrick sbf file on rsd lite and it booted fine, though still no saving of the settings and no wifi no cell service and no text or anything, I kept RSD lite open and i tried one more thing, 2.3.5sv2_198_7_radio.sbf and flashed it, the wifi for the house started working and i started getting bars on my cell service yay, well atleast i thought yay this is after weeks of not having a cell. well i thought all is well im done and fixed. NOPE im not fixed when i try and dial a number or even activate my phone i get nothing, no dial buzzing sounds like you get normally, no any kinds of sounds the call eventually times out and says called failed retry or cancel the call, i hit retry and i get the same thing. i even tried flashing the radio to 2.3.5sv2_254_12_radio. when i used that one it would save settings but i wouldnt get any cell signal or anything. so im back to square one. I need help. this phone is about 2 steps of getting thrown out the window. I just strated working again and i need this phone to call back customers and i cant afford a regular carrier so im on pageplus the phone was originally flashed through remote squad and worked great until i let my youngest son play a SNES emulator on it and it exited out of the program for some reason and it wanted to do the system update and he hit yes and it installed and screwed up everything. All i want now is to get the phone back to somewhat normal, I can use RSD lite, CDMA workshop, QPST, DFS 4.0.0.5 and a couple others if need be i can download anything i just need to be told what files i need and what i dont need to get the phone back to normal, cuz if i dont get this phone back to normal im just going to not get another pageplus card and throw the phone away and ill be back to not being able to work. thanks to all that has responded to the post here i really do apreciate the time you all have taken to help. sorry it took so long to get back to any of you here but i still need urgent help here badly please and thank you for your time to read this i hope i gave you all the info you needed to help me
I just write this.
Calm down, read the 2.3.5 sv2 custom sbf thread one more time and start from the beginning with unbrick steps. Everytime you do that process, you will understand it more and more and your phone will start to work again. Believe me.
peetr_ said:
I just write this.
Calm down, read the 2.3.5 sv2 custom sbf thread one more time and start from the beginning with unbrick steps. Everytime you do that process, you will understand it more and more and your phone will start to work again. Believe me.
Click to expand...
Click to collapse
im getting ready to try this now thank you
mamba316 said:
well when i got that awsome update 2.35 from my son clicking yes to it, i tried just about any roms to get the phone back, first it was the electrify rom which i later find out dumb mistake on my part, anyway now and i mean right now i flashed the phone with rsd lite using the electrify rom 1FF-sunfire-user-2.3.5-4.5.1A_SUN_USC_19.0-19-release-keys-signed-USC-US..... from there i rooted the phone using the torpedo method, then i installed busybox and i forget which method i used but anyway it was all done in fastboot, once i got all that installed i downloaded a apk file system recovery which is MOTODX2_Bootstrap_signed.apk. plugged in the charger and booted up the system recovery or the bootstrap which ever you call it, and went into advanced and did a dalvik wipe i even hit fix permissions, i then hit go back and did a data- factory clear wipe, then went into install zip from sd card and i first used MOF.2.3.5.ish,v1.4.zip and that installed fine the problems i had was sometimes when i would do that i would get failed to boot 2 screen but i just used the unbrick zip that i downloaded here if anyone wants the name or link let me know, anyway.. once booted up with the MOF ish zip it would load fine but wouldnt save any settings or find any APNs or connect to any wireless networks in my house, but the wireless problem was clear it said error on it, so i knew the problem on that was it wasnt working derr. So this story is getting long now. anyway i then rebooted and turned on the bootstrap slash system recovery utility, and i installed first 2.3.x_libmoto_ril.so_198_7.zip and it aborted the install and failed. i then tried the next one in line which was 2.3.x_libmoto_ril.so_254_12.zip and that one installed fine so i rebooted and i got the failed to boot 2 screen and i did the unbrick sbf file on rsd lite and it booted fine, though still no saving of the settings and no wifi no cell service and no text or anything, I kept RSD lite open and i tried one more thing, 2.3.5sv2_198_7_radio.sbf and flashed it, the wifi for the house started working and i started getting bars on my cell service yay, well atleast i thought yay this is after weeks of not having a cell. well i thought all is well im done and fixed. NOPE im not fixed when i try and dial a number or even activate my phone i get nothing, no dial buzzing sounds like you get normally, no any kinds of sounds the call eventually times out and says called failed retry or cancel the call, i hit retry and i get the same thing. i even tried flashing the radio to 2.3.5sv2_254_12_radio. when i used that one it would save settings but i wouldnt get any cell signal or anything. so im back to square one. I need help. this phone is about 2 steps of getting thrown out the window. I just strated working again and i need this phone to call back customers and i cant afford a regular carrier so im on pageplus the phone was originally flashed through remote squad and worked great until i let my youngest son play a SNES emulator on it and it exited out of the program for some reason and it wanted to do the system update and he hit yes and it installed and screwed up everything. All i want now is to get the phone back to somewhat normal, I can use RSD lite, CDMA workshop, QPST, DFS 4.0.0.5 and a couple others if need be i can download anything i just need to be told what files i need and what i dont need to get the phone back to normal, cuz if i dont get this phone back to normal im just going to not get another pageplus card and throw the phone away and ill be back to not being able to work. thanks to all that has responded to the post here i really do apreciate the time you all have taken to help. sorry it took so long to get back to any of you here but i still need urgent help here badly please and thank you for your time to read this i hope i gave you all the info you needed to help me
Click to expand...
Click to collapse
Wow - just Wow. Unreadable. You are truly fortunate that someone actually read that and offered advice.
yes it was a long post, yes it was all jumbled together, anyway i did all the stuff recccommended and it works. the only problem im having now is, its still not lockig onto the right cell tower or something here where i live.
I Have tried Remote Squads Full Flash and other ways of manually programming it and for some reason I cannot get it to lock onto verizon towers, its like it has me permenantly locked onto sprint. when i drive down the road about 8 miles or so i can go down at the sheetz in my area and I get locked onto a verizon tower there but as soon as i move from that area I lose it and it goes back to sprint towers, I talked with Pageplus and they told me some stuff about what SID and NID i should have in but im not sure if the info was correct they told me they didnt know pennsylvavnia all that good but here is some numbers to try .. im about to melt this thing
Try roam control.
Sent from my MB855 using xda premium