Down the wrong pudding hole. - Motorola Photon 4G

So here is my problem, i've wiped my phone so many times to try out every rom/kernel that is posted. The last time i clicked the wrong file to sbf to unlock it and ended up flashing the 235 electrify pudding sbf. (had them all in the same folder...dumbass)
I was able to get rid of the 108 svf error by flashing the boot.img back to the photon ones via fastboot. But still would get the 106 anytime i went to try and flash the sbf.
I've tried in Ubuntu as well as windows 7 to flash it back but nothing has worked since it wants a 235 sbf, and it locked the bootloader.
So I said screw it and tried flashing the electrify 2.3.5 and it loaded up and everything, but i'm stuck on the activation screen and cant get past it. (tires to activate through Verizon)
The 2.3.5 update also removed the bootloader unlock in fast boot even with the id number.
So as easy as it was to flash it right to the electrify sbf, i think once the sprint 2.3.5 sbf is out i should be able to go back. Or once an unlock is found to unlock the bootloader, i can flash the files via fastboot.
I haven't tried messing around with nvflash, since my computer doesn't show the apx when its in that mode.
Update: Was able to bypass activation by booting in to "Boot Android {No BP}" like on the droid x2.

Did you get bootstrap working?
TrojanZulu said:
So here is my problem, i've wiped my phone so many times to try out every rom/kernel that is posted. The last time i clicked the wrong file to sbf to unlock it and ended up flashing the 235 electrify pudding sbf. (had them all in the same folder...dumbass)
I was able to get rid of the 108 svf error by flashing the boot.img back to the photon ones via fastboot. But still would get the 106 anytime i went to try and flash the sbf.
I've tried in Ubuntu as well as windows 7 to flash it back but nothing has worked since it wants a 235 sbf, and it locked the bootloader.
So I said screw it and tried flashing the electrify 2.3.5 and it loaded up and everything, but i'm stuck on the activation screen and cant get past it. (tires to activate through Verizon)
The 2.3.5 update also removed the bootloader unlock in fast boot even with the id number.
So as easy as it was to flash it right to the electrify sbf, i think once the sprint 2.3.5 sbf is out i should be able to go back. Or once an unlock is found to unlock the bootloader, i can flash the files via fastboot.
I haven't tried messing around with nvflash, since my computer doesn't show the apx when its in that mode.
Update: Was able to bypass activation by booting in to "Boot Android {No BP}" like on the droid x2.
Click to expand...
Click to collapse
Sent from my MB855 using XDA App

Was able to root it via the photon torpedo, even though it says it fails, it wont install the apks from the root program but it is rooted. Just downloaded them off market and ran root updater.
Was able to get system recovery to install and booted in to it just fine. but it soft bricks after i install the skiny4g zip file, boots up the first time all the way to the US Cellular boot screen then resets, and then loops the Moto Dual Core icon. Tried the "Boot Android {No BP}, and same effect, also tried just wiping cache and then wiping the system and still the same results.
Update: Finely got Skinny4G to boot, took 3 tires and the last time i wiped system 2 times in mounts and storage, shows up as sprint and 2.3.4 and its looking at sprint wireless towers, just trying to activate it now.
Phone activated on sprint, 3g works with out any issue, but the wifi and 4g is dead, now i just have to wait for the electrify unlock or 2.3.5 sbf for sprint.

Hey man, i did the same i flashed 235pudding by mistake, so i tried using the 2.3.5 sbf form electrify and it was going great until !switching phone to bp.. something else" then it stopped on 99% and failed to flash... i waited for 5 minutes just to be sure nothing else happened... it didnt
Then i pulled battery and powered the phone again this time it didnt said the "failed to boot 2" but it didnt started it just sits on the motorola dual core logo.
I pulled battery and powered it trying to go into RSD mode and it just doesnt appears :O
I pulled battery and tried to go into fastboot and doesnt appears either.... i just can turn it on and it sits on moto logo.... any help ideas? Tnks
__________________________________
Edit: I pressed vol up and down while power button and it finally appeared RSD mode.... but battery too low to flash, im gonna charge the battery on an external charger for an hour and report later if RSD lite actually recognizes the device.
_____________________________________
YEAH! After charging battery the process completed, im an international user so its not very imporanto to me Spront or US cellular, the phone boots good without my sim... but as soon as i put it in it says " modem did not power up (0)" so...
Does Anyone knows where to go form here?
Thanks

jokersax11 said:
Did you get bootstrap working?
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Bootstrap install just fine after rooting.

Unbrick yourself
I want to thank Koriotto and everyone else who suggested and or tried the idea of flashing a 2.3.5 rom to save our backs. Now to everyone who has flashed 2.3.5 electrify pudding into their photons:
Disclaimer:
1°This will bootlock your phone until a working pudding for 2.3.5 is released.
2°I have no idea whether this will work with sprint whatsoever since I can't try it out being an "international" user, but at least your phone won't be a total brick. However, my common sense tells me this most likely won't work with Sprint.
3ºThere is a leaked Photon 2.3.5.sbf lurking amid devs, but as far I know it hasn't been released to the public yet. However, in case you do get ahold of it, please provide me the link so that we can try it out and see if we can help the Sprint folks get back to a stock Sprint rom. "Internationals" most likely won't care.
1°Try to get as much juice as you can into your battery.If you can, use someone else's fully loaded battery or charge yours with an universal battery charger (extremely cheap and easy to find). Your phone won't charge while in rsd or fastboot mode.
2°Download and install the appropriate Motorola drivers (x32 or x64 according to your windows flavor)
3°Download Electrify 2.3.5 SBF from here: https://rapidshare.com/#!download|8...19.0-19-release-keys-signed-USC-US.rar|530398
4°Get your device into RSD mode. If your loader says RSD mode, go to step 5. If your loader says nothing or is stuck on "Flashboot", don't worry. Power off your device and then press Volume down + power. The phone will turn on and then off. Then power on normally and you will be on RSD mode. If this doesn't happen the first time you try it, just keep repeating the forementioned process until you get into RSD mode.
5°Flash the SBF file you downloaded with RSD Lite
6°Live to win!
UPDATE: link from Team US Cellular seems to be down. I'll personally upload the file once I get home tonight.

Yeah. Praise US Cellular.
Sprint can I haz 2.3.5 yet?

Thanks so much for unbricking my Photon
Worked like a charm for mine !
Thanks !!!!
firtermish said:
I want to thank Koriotto and everyone else who suggested and or tried the idea of flashing a 2.3.5 rom to save our backs. Now to everyone who has flashed 2.3.5 electrify pudding into their photons:
Disclaimer:
1°This will bootlock your phone until a working pudding for 2.3.5 is released.
2°I have no idea whether this will work with sprint whatsoever since I can't try it out being an "international" user, but at least your phone won't be a total brick. However, my common sense tells me this most likely won't work with Sprint.
1°Try to get as much juice as you can to your battery.If you can, use someone else's fully loaded battery or charge yours with an universal battery charger (extremely cheap and easy to find). Your phone won't charge while in rsd or fastboot mode.
2°Download and install the appropriate Motorola drivers (x32 or x64 according to your windows flavor)
Click to expand...
Click to collapse

the download link doesn't work,would u plz give u a new download link,I need to unbrick my phone.
Thank u.

motiam4 said:
the download link doesn't work,would u plz give u a new download link,I need to unbrick my phone.
Thank u.
Click to expand...
Click to collapse
Original link went went down. Already corrected with one from Team US Cellular. Happy downloading

any updates with unlocking the bootloader for 2.3.5 flashed from sbf?

Related

[Q] Did I brick my photon?

So I think I may have screwed myself. I was following this guide for changing the battery icon to 1% increments instead of 10%, went to reboot and now my photon is stuck on the Motorola Dual Core technology screen. I can't get adb to recognize it and its been stuck like this for a good 20 minutes. Any thoughts? Am I screwed?
i had this exact problem 3 nights ago
Download rsdlite 5.3.9 , 5.0 would not support the phone.
download either 198-6 or 198-7 sbf found in the devolpment sections
you can flash it with the rsdlite program by booting to rsd, Vol up + power
make sure you have full battery and it will reboot a couple times on its own at the end i had to do a manual reboot but it told me i needed to. your phone will reactivate on reboot
I've been trying to boot to RSD but it seems stuck on that as well.
EDIT: sorry I guess I didn't realize I need RSDlite to make this work. I found a youtube video with links on how to flash this sbf so hopefully this will work. Downloading the 400+mb sbf file now (slow internet so its gonna be ~40 minutes), but after that I'll try flashing.
Are you unable to boot into rsd mode even after pulling the battery? If so then I'm not sure that you will be able to use the sbf file to go back to stock. It's worth a try either way though I suppose if worst comes to worse you can take it back to sprint.
SNAAAAKEE said:
Are you unable to boot into rsd mode even after pulling the battery? If so then I'm not sure that you will be able to use the sbf file to go back to stock. It's worth a try either way though I suppose if worst comes to worse you can take it back to sprint.
Click to expand...
Click to collapse
I didn't realize I needed RSDLite to push the SBF (I really had no idea what rsd mode was). I managed to find a video from qbking on how to unbrick the Photon and follow that. It worked and I am back to where I was.
Thanks guys and a special thanks to Shabbypenguin who helped talk me through the ordeal a bit on IRC.
So I got my Photon up and running again but...I can't make calls with it. I tried to Update profile/Update PRL just to see what would happen but...they both result in force closes on settings and bringing me back to About Phone. I'm going to try and have Sprint reactivate it but...anyone have any thoughts?
You may want to do a factory data reset before trying to flash the sbf again via rsdlite.
Sent from my MZ601 using XDA App
So I managed to reactivate my phone with Sprint. However now I have no data (unless roaming). I read that I may have to update PRL in About phone to get my data back but...whenever I try to update PRL or profile it force closes.
Anything I can do to fix this? I restored everything I had frozen via titanium backup but perhaps something is missing here that is force closing those two?
Durp. Factory reset solved this issue. Data/phone capabilities restored and customization process, take 2, begins now.
Thanks to those that helped again and hopefully this thread will help someone should they soft brick their photon.
.cruiser said:
You may want to do a factory data reset before trying to flash the sbf again via rsdlite.
Sent from my MZ601 using XDA App
Click to expand...
Click to collapse
I am having similar issues as described in this thread with flashing my Photon (back to stock). I forgot to factory reset before I began the flash process and now I can't get access to the O/S so my question is how do you do a factory reset without going into the Android O/S? Can you do this from fastboot/nvflash/RSD?

[Q] Attempted Root, now I'm in endless reboot, help.

Hi,
I got a refurb Atrix 4G from AT&T today in the mail to replace my Atrix 4G that had the wifi/bluetooth radio go bad.
Anyways, I attempted to root this new Atrix using the method from here: Atrix Forums root 4G using fastboot.
If you'll note, those instructions omit the 'chmod' command that is found on the instructions here on xda (I downloaded the preinstall.img from xda, since the other link was bad)
After I rooted, (but I have not rebooted) I transferred using USB mass storage everything that was on my old atrix (I told windows to overwrite everything during the copy)
I also used ADB to push Titanium Backup APK.
After that, the phone restarted unexpectedly.
The phone would startup and restart partially through the startup, occassionally I would see the unlock screen for a moment, but usually it would constantly cycle through the Motorola animation then turn off with the green led, then back on.
I figured I messed up the root or something, so I used the Android Recovery to wipe my user data and cache, that didn't work, so I used RSD Lite and pushed the signed ATT 4.5.91 SBF to the phone. I wiped the user data/cache using Android Recovery again after the sbf. Still the same reboot cycle.
Anything else I can try to revive it?
forum.xda-developers.com/showthread.php?t=1421261
This, then SBF again (with the latest RSD lite).
Still broken?
If you aren't unlocked, do so, then maybe try a fruitcake.
PM me with issues.
I got errors from fastboot when it erased system/boot/webstop/preinstall... Trying RSDLite again.. then unlock, will report back.
I erased partitions (with errors see above), rsd'd the OTA locked sbf again, then I unlocked, still rebooting.
I'm thinking it's something hardware-related since the phone will get all the way to the unlock/motoblur setup screen after a battery pull. but will only do the moto-logo after that.
Can I undo the unlock if I need to send it back? It's not clear to me if using RSD lite with the OTA locked signed ATT 4.5.91 sbf will brick it..
tuxp3 said:
Can I undo the unlock if I need to send it back? It's not clear to me if using RSD lite with the OTA locked signed ATT 4.5.91 sbf will brick it..
Click to expand...
Click to collapse
Can't lock it again.
Great, will ATT take it back? I've only had it a few hours and the problems began before I unlocked.
Dunno. I personally haven't read any reports of phones being rejected for warranty because of an unlocked bootloader, but since you only just got it as a replacement for another one, they may scrutinize you more.
Does it seem like it could be a battery issue? I'd like to think it's not, but my old phone had a similiar rebooting problem (although it would reboot well after startup)

[Q] Atrix 4G won't start up or install from recovery

After countless hours of research, I decided to unlock my bootloader and to root my Motorola Atrix 4G. With success, I was happy to have everything working and installed the Darkside Custom Rom. I let a friend borrow my phone, and they saw the AT&T system update and they decided to install it. They bring back the phone and the system update has finished and was installing. The phone powers off and starts to install the update. 10% into the install, it stops, and I got the little green droid man with the /!\ behind him. I take out my battery, place it back in after 30seconds. It powers on, boots up, powers off and tries to load the update again. I restart it, but this time quickly going into RomManager and starting it up in Recovery Mode. I go to restore the phone using the file I backed up from the TitaniumBackUp app, everything backs up except the system. I plug my phone into my laptop, and everything is in the folder. I performed a system/factory reset, downloaded the last Gingerbread update, but nothing helps. Anything I try to load it says "Installation aborted". No matter if it's the original update or a ROM I download. Looking up other forums, I notice others that have downloaded the Darkside ROM have had the same; if not similar issues. I apologize for the length of this message, but I wanted to put in as much detail as I could so you know exactly what the issue is. I look forward to hearing from someone, and thank you in advance!!!
You probably need to sbf it back to a stock ROM and start over. I had a similar problem when I first got my Atrix and the AT&T update first came out. I had already rooted it and didn't unlock the bootloader yet. It tried to update and bricked the phone. Got AT&T to give me another though as I had just got the thing.
nickdeal said:
You probably need to sbf it back to a stock ROM and start over. I had a similar problem when I first got my Atrix and the AT&T update first came out. I had already rooted it and didn't unlock the bootloader yet. It tried to update and bricked the phone. Got AT&T to give me another though as I had just got the thing.
Click to expand...
Click to collapse
Thanks a ton! How would I go about doing that?
You need to download motorola RSD app to you computer. Search XDA for stock firmwares and download one. You will then need to use the button combo to get in to RSD. Connect the phone to your computer and make sure it recognizes. I had an issue where one of my laptops would not recognize the phone for anything. I had to use a different laptop. Once it's done you should be back to stock. The bootloader should be unlocked still. Just root and flash your ROM of choice.
Sent from my MB860 using XDA App

[How-To] Unlock ATT/T-Mobile on 2.3.5 OTA

IMPORTANT: This guide is for users with a Motorola Photon 4G (MB855) running the 2.3.5 OTA update only. For the lucky ones still running 2.3.4, you want this thread. For those of you who don’t know what version of Android you are running, DO NOT try this. Please read these forums carefully and learn everything you can before attempting this.
This guide is based on the work of halfevildruid and his thread for unlocking GSM for Photon users on 2.3.4 with unlocked bootloaders. All users should take the time to carefully read through that thread here and keep in mind that it was written for 2.3.4/unlocked bootloader users. Some files and steps in that thread will not work on Photons that have had the 2.3.5 OTA applied.
Unlocking US GSM Carriers on 2.3.5 OTA​
Before You Start:
Doing this will remove the domestic GSM carrier lock on the Sprint Photon running 2.3.5 OTA. This process will most likely break your ability to return to Sprint service, so please DO NOT DO THIS if you want to keep your Photon running on Sprint. There are ways to fix this, but none have been tested on 2.3.5 OTA devices. As far as I know, this method has been confirmed to work on three phones (including mine), so consider this experimental and high risk. I am not responsible for bricked phones, warranty issues, cats chasing dogs or hot snow falling up if you try this.
Things You Need:
1.Windows PC (tested on Win 8) with the following software installed:
-Motorola USB Drivers [Download]​-RSD Lite [Download]​-ADB Tools/Android SDK [Download] (Not really necessary, but helpful if you have USB issues.)​2. Micro USB cable and wall charger (needed for bootstrap recovery)
3. Standard (full size) SIM card for US GSM network. (ATT/T-Mobile/Straight Talk)
4. Micro SD card (not necessary, but good just in case)
5. Motorola Photon running 2.3.5 OTA ONLY
Files You Need:
1.Full US Cellular Electrify SBF [Download]
-1FF-sunfire-user-2.3.5-4.5.1A_SUN_USC_19.0-19-release-keys-signed-USC-US.sbf​2. Unbrick SBF [Download]
- 2.3.5_45.4.13ota_unbrick.sbf​3. Electrify/Photon (almost) One Click Root [Download]
-su.zip​4. Bootstrap Recovery [Download]
-MOTODX2_Bootstrap_signed.apk​5. Peetr’s Hybrid Locked 2.3.5 ROM [Dev Thread/Download]
-HybridGBv20locked.zip​6. KDDI Radio [Download]
- KDDI_Radio_udate.zip​
If any links do not work, most can be found at www.motosunfire.com.
Steps
1. Backup Your Stuff!
2. Shutdown phone and remove SIM/SD card (if applicable)
-Tip: Leave your battery cover off. There’s going to be a lot of battery pulls…​3. Open RSD Lite on your computer.
4. Start phone in RSD mode:
-With phone unplugged hold volume-down and power
-It should say fastboot in the top left corner, press volume-down until RSD appears
-Connect phone to computer
-Press volume-up to enter RSD mode​5. Select the full US Celluar SBF in RSD lite and press start.
-This process takes a few minutes and will end in an error, this is normal.
-The phone may hang on the dual core screen, if so pull the battery.
-The phone will either do two things:
-Bootloop with the US cellular logo
-Boot normally to home screen​-In either case, pull the battery and follow the steps to enter RSD mode again.​6. Once you are in RSD mode again, flash the Unbrick SBF
-This should not end in an error, but RSD may say you need to manually reboot your phone, this is normal.
-Once your phone reboots you may experience bootlooping, if so do a factory reset (See below)
-With the phone off pess vol-down + power
-Press vol-down until Android Recovery is shown, press vol-up to enter.
-Press both vol-up + vol-down to see menu.
-In the recovery screen, use the volume buttons to scroll and select factory restore.
-Press power to wipe the phone.
-When complete, reboot phone and you should successfully boot to home.​7. Once you have flashed the two SBFs, you should be able to get to the stock US Celluar rom.
8. After everything has loaded, you need to obtain root access. (See below)
-Make sure all USB drivers are installed on your computer.
-Enable USB debugging mode on phone (System>Applications>Development)
-Unzip the su.zip on your computer and open root.bat, the program will take you through the rest.​9. Once rooted, place the KDDI zip and Peetr’s ROM on either the internal or external storage.
-This is also a good time to install your SIM card.​10. Install the Bootstrap recovery and follow the instructions to boot into recovery.
-Remember: You need to be on AC power to get into Bootstrap recovery.​11. In recovery, flash the KDDI zip and then Peetr’s ROM
12. After installing the ROM, flash KDDI again.
-Flash KDDI as many times as you want, it will give an error but will still work.​13. Reboot phone and enjoy the GSM radio.:highfive:
-If you bootloop again, just do another factory reset. Peetr’s ROM will still be there.
-You may have to root and install Bootstrap again.
-It never hurts to flash KDDI one more time just to be sure.​
See next post for Q&A
Q&A
When You’re Done:
Q: How can I go back to Sprint?
A: The only way that worked for me was by flashing 2.3.5. Photon 4.5.1A-1_SUN-254_13 from this thread. This will take the phone back to mostly stock, but there may be residual radio issues.
Q: What carriers can I use now?
A: Any GSM carrier that uses a standard SIM card. These include:
-ATT (3G)
-T-Mobile (2G/EDGE unless you live in a re-farmed area.)
-Straight Talk (3G w/ATT SIM, 2G w/T-Mobile SIM)​
Q: Can I unlock my bootloader now?
A: Nope. This only unlocks the GSM radio.
Q: Can I install a different ROM than Peetr’s hybrid?
A: SIM unlocking has only been confirmed to work on Peetr’s locked hybrid rom.
Q: I’m pissed at Motorola for canceling the ICS upgrade. How can I sleep at night?
A: As of right now (and probably forever) there is no way to install any version of Android higher than 2.3.5 on any Photon with the 2.3.5 OTA. However, Peetr’s ROM can be modified to make it look and function like ICS. Planters76 has made an excellent theme for the hybrid ROM that can be flashed in Bootstrap. It can be found here.
Once you flash that theme there are several applications on the Play Store that replicate the ICS/JB experience. Developer Moblynx offers replacements for the clock, camera and gallery. Mobint Software makes home and lockscreen replacements as well. I’m not affiliated with these developers, but their work is solid. This is as close as were going to get to ICS on 2.3.5.
Q: Which developers contributed to this?
A: halfevildruid, mof9336, peetr_, Noncs, Lightsword1942, Planters76, and many others. If anyone else would like to be mentioned, let me know and I’ll add you in. Without these developers we’d be left out in the cold, so give them some thanks.
Q: Who are you and what are you doing here?
A: I am not a developer myself, so just think of me as the person gathering all of the information and trying to simplify it. I can’t stand planned obsolescence, so the Photon is a sore point for me. I’ve stayed in the shadows before now because I haven’t had a reason to speak up, but the locked down OTA and cancelled ICS update bugged the hell out of me. I was in the first soak test for the 2.3.5 OTA, so I had no warning that Motorola was about to screw me and many others. If I can help anyone else that was locked down eek any more life from their phones, then I’ve done my job.
Q: I’m lost! Can you help?
A: Just reply with your questions and I’ll try my best. Keep in mind that I am not a developer, so there are some questions I may not have an answer to.
Finally, if anyone finds any incorrect information in my post or some other error, please let me know so I can fix it. I’d like to prevent any unnecessary phone damage if possible.
Works great. thanks.
now 3G shows 4 bars instead of 1 earlier.
I had to use libmoto_198_7
peetr's ROM is cool. and I like the keyboard!
great work.
Works, but WIFI shows error
I followed the steps and I have my Sprint Photon working in AT&T. But the issues is, the Wifi shows error and doesnt start at all. is there something that can be fixed. Also, How can I get my Google Play up and running. The market icon in the stock Peeters ROM doesnt seem to work and time and again just goes to a browser Window.
Thanks a lot for compiling the steps here...
The combination of a WiFi and apk error makes me think that the ROM needs to be flashed again. Also try downloading a new copy of the zip in case the first one was corrupted. If that doesn't fix it, there was another zip floating around the dev forums that fixed WiFi and MMS issues on the USC ROMs. The file is USCMMSWIFI.zip, I just don't know exactly where it is. As for Play store issues, look around for a recent copy of vending.apk or a flashable zip version and install it manually.
Sent from my MB855 using xda app-developers app
flashing 2.3.5_45.4.13ota_unbrick.sbf at the end fixes wifi issues.
Thanks portman and makakalo. I will do the same. I found the USCMMSWIFI.zip, but it is not in a SBF fashion. Any steps that I could follow to include this fix would help me. Thanks again and Merry Christmas!!
Reflashing Peetr's ROM didnt help with Wifi
I reflashed Peetr's ROM, but still stuck with WiFi Error...Installed USCMMSWIFI.zip using Bootstrap Receovery Mode and the installation completed. Yet, Wifi Error is persistent and cant use Wifi
If you haven't already done so, do what portman suggested and flash the unbrick sbf again. If that still doesn't fix it the only other thing I can think of is going back to stock and redoing the entire process. You may need the 254_12 radio sbf and libmoto zip as well as the 254_13 modules zip to completely reset. Those files are in the 2.3.5 sv2 unbrick thread in the dev forum.
Sent from my MB855 using xda app-developers app
Dear all
Thanks..Got it working. Realized that there was some issue in the Peetr's zip file downloaded. Went through the process meticulously after redownloading and got my phone working in an amazing manner!! Thanks a lot to all.
regards
Ram
Thanks for putting this together, I am still waiting on my SIM, should be in the mail today.
Just one question on the root method..does it really mater which root method I use?
The last time I rooted this phone I used torpedo direct v1.1
I seem to be stuck in the unbrick sbf??
Manually powered up my phone a couple of times.
Never mind stuck in bootloop...DOH!
Wipe data/cache
Sent from my MB855 using xda app-developers app
Something strange
I was stuck in a bootloop after flashing the Hybrid ROM/kddi and I could not even get to bootstrap soo, I went back to the beginning and after the first SBF step the phone starts normally and my baseband is N_02.29.04P.
Now I have a US cellular phone with a GSM radio:silly:
The phone is not rooted at this time nor did I run the unbrick sbf.
I am tempted to use it like this to see if I can activate it on my carrier...heh why not.
Update:So what does the unbrick do? Do I need to run it?
wifi works now and it did not work before the phone seems fine, still want to root and load bootstrap though.
My carrier cannot activate me until after the holiday, but the phone shows me on the Tmo network.
After flashing the unbrick sbf, my phone is probably bricked as it is now stuck on : Failed to boot 4, starting RSD mode
Any idea how to recover ?
Thanks !
portman said:
Wipe data/cache
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
As many times as I have done this you would think I would remember that, but no.
After wipe data/cache I got the hybrid rom to load and ran fine except I could not get the radio to work??
Tried rebooting several times, reinstalling kddi several times, but no go.
Fortunately I made a backup, so went back to USCell ROM and the radio was back
khatta said:
After flashing the unbrick sbf, my phone is probably bricked as it is now stuck on : Failed to boot 4, starting RSD mode
Any idea how to recover ?
Thanks !
Click to expand...
Click to collapse
The failed to boot 4 means there's a problem with that partition meaning, whether its corrupt or not there, it just won't boot and will relay that if to you.
To recover, I'd imagine that you need to try the steps over after wiping your data/cache but to make sure that the phone boots after flashing a full sbf.
http://forum.xda-developers.com/showthread.php?t=1759997 (This has lots of info on the sbfing you are doing)
Sent from my sunfire using xda premium
you need to flash anyone of the following using bootstrap recovery
198_7 radio sbf ----- 198_7 libmoto_ril.so
254_12 radio sbf ----- 254_12 libmoto_ril.so
(thanks to Peetr_)
in my case 198_7 radio sbf ----- 198_7 libmoto_ril.so did the trick even when my phone had a locked bootloader.
after this flash KDDI radio
DXM31 said:
As many times as I have done this you would think I would remember that, but no.
After wipe data/cache I got the hybrid rom to load and ran fine except I could not get the radio to work??
Tried rebooting several times, reinstalling kddi several times, but no go.
Fortunately I made a backup, so went back to USCell ROM and the radio was back
Click to expand...
Click to collapse
portman said:
you need to flash anyone of the following using bootstrap recovery
198_7 radio sbf ----- 198_7 libmoto_ril.so
254_12 radio sbf ----- 254_12 libmoto_ril.so
(thanks to Peetr_)
in my case 198_7 radio sbf ----- 198_7 libmoto_ril.so did the trick even when my phone had a locked bootloader.
after this flash KDDI radio
Click to expand...
Click to collapse
I flashed the 254 before and it was a no go for the radio.
I just did a backup and just to be clear on what I need to do:
wipe data/cache/dalvik
flash hybrid ROM
flash 198_7
flash 254_12
flash radio
and I should be golden, correct?
thanks
as a side note:
the phone is currently working great with the usc rom except the network shows T-Mobil the 'e' gets loped off and I have not actually activated the phone yet because my carrier was closed yesterday(wonder why) they said after Wednesday I should get an email.
DXM31 said:
As a side note:
the phone is currently working great with the usc rom except the network shows T-Mobil the 'e' gets loped off and I have not actually activated the phone yet because my carrier was closed yesterday(wonder why) they said after Wednesday I should get an email.
Click to expand...
Click to collapse
Thank God, I thought I was the only one with the T-mobil issue. It happens on every ROM. I noticed if I dial *#*#4636#*#* and go to phone info, it sticks the e on the end for a little while but other than that, I randomly have it.

[Q] Moto Phoukd - New refurbished Photon stuck boot loop...

Background:
Ok so I had the original Photon 4g with ota 2.3.5 (rooted) and the speaker went bad...
took it to the Sprint store they told me they didnt have the parts in stock to fix it...
So they ordered me a whole new phone on Friday (& had it ready for me to pick up yesterday no cost to me)
When i got the phone i realized it was a refurbished pho 4g with a sticker in battery compartment that says: VTO 03/05/13 guessing refurb date?
But anyways the phone came with 2.3.5 installed (im pretty sure came with 4.5.1A-1_SUN-254_13 sbf ..not sure)
I used Photon-Torpedo instructions on motosunfire.com/2-3-5/ to root and was successful
then installed ClockworkMod Recovery On Photon 4G Via Bootstrap Recovery method successful
Problem
Happened when i tried to install Dark Fire Theme...http://forum.xda-developers.com/showthread.php?t=1363636
It rebooted from recovery then just loaded boot animation that came with Dark Fire Theme and just been looping that boot ever since
Furthermore Im pretty sure ive Phoukd myself because I pulled the battery and booted Android Recovery and wiped/reset the phone hoping that would get the phone to start (im thinking that just removed my root??) but still just loads to boot animation and replays over and over
Tried..
I stayed up until 4am this morning searching google, motosunfire and xda etc for a solution but i havent seen anything or even anything involving the refurbished version on the Photon 4g ....
Also tried to use RSD lite to flash another sbf but i get errors everytime
Also tried to save sbf to memory card and update with Android Recovery but get the "E:signature verification failed" ...really wishing I would have toggle notification in clockwork
Tried about 6 different .sbf's in Android Recovery and RSD Lite all come back with some kind of error
Am i permanently bricked or is there a way to get my phone to boot all the way again??
...I have Sprint Insurance but i doubt i can take the phone to them in its current state & id rather not anyways insurance deductible is $100 for Photon 4g ...still!!! ...And i only had this phone for less than 24hrs
..Thanx in advance ...any help appreciated !!
Did you make a backup in CWM or Boot Strap?
———
Screwed by Google. Canceled ICS upgrade on my Moto Photon. No Wow for us.
rbeavers said:
Did you make a backup in CWM or Boot Strap?
———
Screwed by Google. Canceled ICS upgrade on my Moto Photon. No Wow for us.
Click to expand...
Click to collapse
...Ummm sure didnt make any kind of back up ...Because I figured i was just installing a theme, what harm can that really do?!
From the description of that theme, it's based on 2.3.4 sbf's and includes themed 2.3.4 frameworks. So that's why it won't boot. Look inside the zip and check what files will need to be replaced by 2.3.5 files. But I'm not sure if you can adb remount /push files during the boot process.Try to get into bootstrap.... By pulling the battery and plug in a usb cable, then power on to get to bootstrap. Then flash the needed files. If that don't work, you'll have to read more into the electrify sbf repair process.
cougarcougar said:
From the description of that theme, it's based on 2.3.4 sbf's and includes themed 2.3.4 frameworks. So that's why it won't boot. Look inside the zip and check what files will need to be replaced by 2.3.5 files. But I'm not sure if you can adb remount /push files during the boot process.Try to get into bootstrap.... By pulling the battery and plug in a usb cable, then power on to get to bootstrap. Then flash the needed files. If that don't work, you'll have to read more into the electrify sbf repair process.
Click to expand...
Click to collapse
ok thanks ...not too familiar with adb but im doing research to get used to it and try to push the correct files ...i think i lost my clockword recovery and root when i went into Android recovery and did a wipe/factory reset ...but im gonna try adb now ...ill let you know how that goes thanx a million
cougarcougar said:
From the description of that theme, it's based on 2.3.4 sbf's and includes themed 2.3.4 frameworks. So that's why it won't boot. Look inside the zip and check what files will need to be replaced by 2.3.5 files. But I'm not sure if you can adb remount /push files during the boot process.Try to get into bootstrap.... By pulling the battery and plug in a usb cable, then power on to get to bootstrap. Then flash the needed files. If that don't work, you'll have to read more into the electrify sbf repair process.
Click to expand...
Click to collapse
so i cant get adb to recognize my phone ..am i supposed to go into android bootsttrap or use the early usb enumeration option??
SlikkRikkDaRuler said:
so i cant get adb to recognize my phone ..am i supposed to go into android bootsttrap or use the early usb enumeration option??
Click to expand...
Click to collapse
ok so i finally got into adb and went messing around
i looked at the files in the Dark Photon Theme.zip and tried to change them with files from "Blur_Version.45.3.6.MB855.Sprint.en.US"
it sent all files to the phone OKAY
...then it FAILED to write them all
....except boot.img, (which i got from somewhere in one of the the .sbf's i downloaded trying to fix the phone)
now when i turn the phone on it doesnt even make it to the boot animation screen
...just stays at moto dual core screen
is this progress or am i just totally screwed now???
..is there a way to root using adb push or without starting the phone??

Categories

Resources