Hi All,
I've been combing the forums for a number of days to see if I could find some help to a bluetooth pairing prob, but have yet to find what I'm looking for.
I have a new t-mobile mda that has been flashed to the latest 2.24 ROM (yes, i know it's a beta rom). I also have a Motorola H700. I can get the phone to see my laptop just fine, but it won't even detect the headset. I've looked around motorola's website, but it's less than helpful. I'm really hoping my new headset isn't DOA. It charges fine, but never enters pairing mode. I don't have another bluetooth enabled phone to test it with. I'm really hoping someone can offer some suggestions.
Thank so much!
im using an h700 i got from ebay for 35 bucks on my tmobile mda (2.17 qtek rom) and it pairs just fine. does your led stay in constant purple? that means it should be pairing. i dont see any reason why the phone can't detect the headset. are you sure the headset is entering pairing mode correctly? remember that after awhile itll exit pairing mode on its own. just a thought.
No, i have yet to get the thing into pairing mode (as i mentioned earlier ). Is there some way to force the headset to do so? Thanks!
Problem fixed. A little reg tweaking and the proper application of buttons & viola!, headest works fine.
care to share how u did that? cuz i have the same headset and i cant get it working either!
Hi
I have had my mozart for about 6 weeks, and been using it in the car with my BMW Bluetooth.
3 days ago, the phone must have re-booted 20times in one hour while in the car. I turned off bluetooth on the phone. The phone stopped re-booting
I am not the only one with this issue. My boss has the same issue and she has a Jag.
I cannot find anything on this!
has no one else seen this!?
i use a sony hands free kit via bluetooth and im finding that once i disconnect and try to make a call, the person im calling cant hear me. but once i resart the phone its fine. im guessing this is a bug that may get fixed when the update comes out. hopefully you may find the same.
breakbystealth said:
i use a sony hands free kit via bluetooth and im finding that once i disconnect and try to make a call, the person im calling cant hear me. but once i resart the phone its fine. im guessing this is a bug that may get fixed when the update comes out. hopefully you may find the same.
Click to expand...
Click to collapse
no problem whatsover in bluettoth, using parrot handsfree kit in my car and MW600 for rest
Same with Opel Astra. It was working fine for one week but now it keeps restarting.
Info
I just dig for some info. It seems that the phone is rebooting when the car try to synchronise the phone book. Just turn off this featuer from the car bluetooth menu.
My Atrix pairs up nicely with my '01 BMW's BT system, but will drop the connection after about 15sec, and then reconnect again, hold that connection for about 15sec, then drop it. Phone will show Paired but not connected, and the car will be in a similar state. Following other's suggestions, I cleaned out my Contacts-- even with no Contacts in the phone, the same thing happens.
Any idea what's going on? My iphone 3gs and 4 connected 100%, uploaded their Contacts, and never gave me a moment's problem, so I know the BT in the car is working OK.
Help!
Sorry to hear that. I have so far no problems with connecting my phone to my built in BT system. I have a Mazda 2010. I stream music and get incoming calls too.
I used a bt headset for an hour long conference call this morning. No lost connections yet. Reboot doesn't help?
Sent from my MB860 using XDA App
Nope, rebooting doesn't help. BT on the Atrix works just fine with my Panasonic house phone that has BT on it.
I had the same issue today in my 2010 Dodge Ram. Captivate worked great in it, but the Atrix dropped the BT/Call after 30-45 seconds or so. I haven't noticed it dropping connection when I'm not using the phone (I have an icon on my ent/nav headunit), only saw the icon disappear when on a call.
Exwoodchuck said:
My Atrix pairs up nicely with my '01 BMW's BT system, but will drop the connection after about 15sec, and then reconnect again, hold that connection for about 15sec, then drop it. Phone will show Paired but not connected, and the car will be in a similar state. Following other's suggestions, I cleaned out my Contacts-- even with no Contacts in the phone, the same thing happens.
Any idea what's going on? My iphone 3gs and 4 connected 100%, uploaded their Contacts, and never gave me a moment's problem, so I know the BT in the car is working OK.
Help!
Click to expand...
Click to collapse
OK, so I messed with it some more...
If I'm super-fast, I can dial from the car's BT system-- and the name of the phone does appear on the car's Nav. That is, until the phone and/or car drops the connection.
I've asked for help on Motorola's forum, and been tracking down a Product Manager @ ATT to get the word up the chain.
I have the same issue with my 04 3-Series. I posted about this in the Problem forum.
No bt issues here. I used it yesterday with a car kit/fm transmitter to stream Slacker and nav simultaneously to my stereo for a couple of hours and it worked great.
Ziuck said:
I have the same issue with my 04 3-Series. I posted about this in the Problem forum.
Click to expand...
Click to collapse
Think we've got the same BT ULF's in our car. Please let me know if you find a solution, and I'll do the same.
mgymnop said:
Sorry to hear that. I have so far no problems with connecting my phone to my built in BT system. I have a Mazda 2010. I stream music and get incoming calls too.
Click to expand...
Click to collapse
Can you skip forward and back and pause?
I could with the iphone but have not been able to get it to work with android.
The weirdest bit is that I got it to work for Pandora ONCE... then never again.
I think it has something to do with the way android treats certain devices... I have motorola BT stereo headphones that the controls worked for WinMo W7 and iphone, but do not work on any android device I've tried.
I also lose connection with the in car BT occaisionally but not very often and can usually get it to reconnect without much hassle.
2010 mazda 3.
Exwoodchuck said:
My Atrix pairs up nicely with my '01 BMW's BT system, but will drop the connection after about 15sec, and then reconnect again, hold that connection for about 15sec, then drop it. Phone will show Paired but not connected, and the car will be in a similar state. Following other's suggestions, I cleaned out my Contacts-- even with no Contacts in the phone, the same thing happens.
Any idea what's going on? My iphone 3gs and 4 connected 100%, uploaded their Contacts, and never gave me a moment's problem, so I know the BT in the car is working OK.
Help!
Click to expand...
Click to collapse
Just because it worked with your iPhones doesn't mean the BT module isn't faulty...it might just have trouble accepting connections from certain things. Not to say the phone's *not* at fault, but don't assume it's the phone when there's a chance it could still be the phone.
I have a kenwood bluetooth module in my receiver that worked perfectly with every phone until I got an iPhone 4 (even previous iPhones worked fine). It wouldn't connect and finally when I got it to work the sound quality was horrendous (most people couldn't understand a single word). I thought the phone was obviously bad until I contacted Kenwood and they sent me a beta driver for the bluetooth module in the receiver. Updated the driver and it worked perfectly.
I agree- the BT module *could* be fault, but given that it works with all iphones and my BB Bold, I'd have to say that it's more than likely something to do with the way the Atrix/Android handles the connection.
Others are now chiming in on the Motorola Forum about this issue- including someone who has a newer BMW BT module than I have - he's also got the same issue. There's also a Dodge owner earlier in this thread that's got the same problem.
On a whim, I copied 20 contacts to the SIM, thinking that might be the problem.
Same results.
i also had bt pairing problems with my ford sync, and it seems to be android related as it also happened with my n1.
couple things to try that should help: disable wireless and make sure you aren't using the power widget on one of your home screens. also, i used autostarts to unbind the media button pressed event, and between those three things, the bt works fine...
Tried an experiement-- copied some contacts to the SIM.
Same issue- phone connects/disconnect/connects/disconnects for good.
Exwoodchuck said:
I agree- the BT module *could* be fault, but given that it works with all iphones and my BB Bold, I'd have to say that it's more than likely something to do with the way the Atrix/Android handles the connection.
Others are now chiming in on the Motorola Forum about this issue- including someone who has a newer BMW BT module than I have - he's also got the same issue. There's also a Dodge owner earlier in this thread that's got the same problem.
Click to expand...
Click to collapse
Apparently you read my post...but didn't understand it completely.
My previous receiver worked *PERFECTLY* with all phones but the iPhone 4. I used about 20+ phones with it without a single problem...but the iPhone 4 wouldn't connect 3/4 of the time, and when it did it didn't transfer any contacts and when I made a call the sound quality was *very* bad. I obviously assumed it was the iPhone 4 until I tried another one with it...turned out it *WAS* the receiver having an older firmware that wasn't compatible with the iPhone 4.
The reason a lot of Audis and BMWs aren't working with a few Android phones (the Atrix being one of them) isn't because Android is designed poorly...it's because the firmware in the receivers doesn't handle the Android setup well. The reason most people can connect but can't get contacts is because the way BMW/Audis poll for Contact lists doesn't work with Android. The car manufacturers haven't spent the time required to realize this and put out a correction. You should be complaining to BMW or Audi about this (whichever type you own) and trying to get them to release an updated BT Stack for your receiver (they might say it's not possible but it is).
Thanks for the clarification.
I doubt that BMW is going to release a firmware upgrade for my BT module - its out of production, and it's already 'state of the art', circa 2006 when they stopped producing them. I've read of other issues with newer BMW and other cars still having issues with the Phonebook upload, which is where I think the problem lies. It doesn't seem to be isolated to older cars either- I've read of 2010 models having the same issue I've got, and not just from European makers.
Digging around, this is a common theme with Android and BT not playing nicely-- many other phone manufactures have released patches/updates to correct similar issues, and I'm hoping that with the Atrix being the 'biggest and baddest', that Motorola sees fit to do the same. I've got a $600 fully integrated factory BT system thats now useless, and I'd sure like to have it working again.
I sometimes forget that I've got another BT-enabled car to test on -- a 2010 Audi A3.
My Atrix paired with no issue, then popped up with a message in the Notification area about allowing access to the Contacts. Ahh-hah! When paired to my BMW, I never get that message. So... the BMW appears to be unable to complete the handshake for PBAP access, and when it fails, it drops.
After syncing with my BMW I do not get the PBAP confirmation.
I did not get the confirmation with my Inspire 4G either but that phone DID work just fine. Contacts and audio would work and never had a drop out when I had the phone.
So there is a way to "fix" this issue without updating the vehicles BT.
Tested with my car bluetooth with 2 calls for ~30 mins in all today morning. Worked fine. It stayed paired on all the time.
I haven't seen anyone post this yet, and I'm hoping I won't draw the usual search you fool comments. I am trying to connect to an IOGEAR GBHFK231 handsfree car device which I know usues a passcode to connect. It pairs without prompting me for the passcode, and when it tries to connect i get a message bluetooth device has disconnected, and the BT no longer shows up in the list.
I am currently using Scotts Cleanrom 1.6.5 without any mods installed, but I have had this problem with stock before unlocking, Nils ICS, Scott's Cleanrom ICS, and a few others ICS and GB.
I have also contacted IOGEAR who says they have not received any reports of issues, and will get back with me if they get any information. I'm holding my breath. Notice the blue color.
Any ideas from this renowned collection of geniuses?
This is a cheapo device by the way, and relaceing it isn't a problem. Just looking for answers.
Thanks,
Matt
Wow no responses yet.. I had it connect one time and was able to make a call using voice dial, but after it was disconnected it went back to paired but not connected, then disappeared when attempting to connect. I'm planning to upgrad my car stereo with a bluetooth calling built in model. Am I likely to have similar problems?
Thanks again.
Am I the only one to experience this problem? anyone using a Bluetooth hands free car device and can verify it working? I'm a little hesitant to buy another and have the same problem.
Sent from my ADR6425LVW using Tapatalk
No comments about searching. See? :-D
You might try Amazon reviews to see if there are any reasonable complaints there.
Not sure where Berlin is but, if you live in the south, the bluetooth device itself may overheat on your dash, and that may cause the issue you describe.
Also, not familiar with BT pairing for your device, but you should be prompted for a pin / code. Make sure you're in BT wireless settings on your Rezound when you are trying to pair. It might be good to "forget" your BT device and start with a fresh pairing attempt.
Sent from my ADR6425LVW using Tapatalk
If you've had the device previously paired to the phone, the phone I'd has changed according to the device. Clear your pair list and re-pair or pair, delete the pair, re-pair.
Sent from my ADR6425LVW using Tapatalk
BT is flaky at best right now with the ICS rom. Mine works most of the time when it wants to. Occasionally I will have to reboot my phone to get it work right.
I have the turtle beach px500 headphones and my phone hooks up to them over Bluetooth just fine. Can make calls, listen to music.
Running innefabilis 1.0
Sent from my ADR6425LVW using XDA App
htc uses its own BT stack. Unfortunately, BT still has too many variables which is why I have never bought the BT peripheral for my pioneer system. Not worth 150 bucks to have it not pair with a phone down the line.
Thanks for all the replies. I've been through stack problems in the past with some car audio bt devices never won one yet. This issue started before I ever unlocked my phone, and I have used both GB and ICS roms with no luck so I'm going to rule that out for now. I've started getting error messages that say I am using the wrong pin to pair, but have never been given the box to enter a pin. So far as heat etc this was working fine on my Dinc, and hasn't been in the car since I switched to the Rezound. I have also connected it to other phones while trying to fix it without a problem. Does anyone have a method to force the box to open to enter the pin, or is there possible a security setting that I need to remove?
Well I figure it out. I changed the bt device to a setting to use 2 phones, then reset it to factory default and it's working now. I don't know why the other resets didn't do the same thing, but it's working.
Hi
Super new here with a question that hopefully someone here can help with. So I'm into rc cars and Traxxas a huge rc company has this app that integrates with the transmitter via Bluetooth. It allows you to connect with your rc car to do all sorts of tuning and adjustments. Basically there's a Bluetooth Module that connects to the transmitter. So to my surprise it's not connecting to my Galaxy s8, it was working with my Samsung tablet E and up until this last update has stopped connecting as well. Connects to an iPhone just fine. Friend of mine has a Galaxy note 8 and the same setup and his note connects fine with his transmitter but not mine.
So I contact traxxas about all this and they suggest sending them my module to be flashed. They seem to point out how it's not their fault and it's android with their latest security patches. Now i don't know crap about crap as far as this stuff but it doesn't sound right that everything else I own with bluetooth connects just fine but their app does not. I've looked around but haven't gotten much info on this issue and will pretty much have to send the module in to be flashed.
Was just wondering if any of you knowledgeable guys in here were able to shed some light on the situation. I worry that I will have to go through this everytime Android has a security patch update which will totally suck. Anyhow thank you guys in advance, any input would be greatly appreciated.