This thread was created to verify and promote the SuperOneClick rooting method that worked for me. I purchased a YP-G1 SGP 4.0 from Amazon recently and found enough hints on what to try for gaining ROOT.
All credit for this method goes to CLShortFuse and his SuperOneClick process.
There may be other steps to get this running, but below is what I did and it worked.
1. Enable USB Debugging.
2. Connect YP-G1 to PC, mount storage.
3. Locate Samsung Kies install on phone storage, install Samsung Kies.
4. Reboot after install.
5. Open Kies, run the update. (Kies never successfully connected to the YP-G1. I believe this was just to get drivers installed.)
6. Extract SuperOneClick to a folder on your PC's HD. (I chose a folder with no spaces in the name. Not sure if it matters.)
7. Unmount storage from the phone's notification bar.
8. Launch SuperOneClick.exe.
9. Click ROOT on SuperOneClick application on the PC.
10. Sit back and wait. It takes quite a while with mandatory 40s pauses.
This method may include steps that are not actually needed, but it is what I did and rooting the YP-G1 was successful. I will try to update the steps if I found a way to take out a few steps.
User etrnldrk reported that the update to Kies was not necessarily.
You don't need to update Kies to get this to work. The drivers installed just fine for me with the version included on my player.
ESET smart security says this file is loaded with trojan viruses. I wont touch it!!!!
thedjmike said:
ESET smart security says this file is loaded with trojan viruses. I wont touch it!!!!
Click to expand...
Click to collapse
Did you read the thread? It's normal that your antivirus will detect virus because many anti-virus detect exploit as virus but it's a false alarm.
Does it work with 2.3?
thanks dude worked like a charm on my 5inch yp -G70
-sandro- said:
Does it work with 2.3?
Click to expand...
Click to collapse
Sorry if I sound noobish but, what is 2.3? Is that the Android OS version?
azoller1 said:
thanks dude worked like a charm on my 5inch yp -G70
Click to expand...
Click to collapse
Good to hear this method was attempted on a 5" player. I really like this device and since I bought it for my Niece as a Christmas present, I might pick up the 5" for myself.
I've not had to process root again on the device, so I don't have much to update yet. Sounds like the Kies Update step was not needed, so thanks for reporting that.
chrisgriner said:
Sorry if I sound noobish but, what is 2.3? Is that the Android OS version?
Click to expand...
Click to collapse
Yeah, Pretty sure that's what they mean.
I also really like this device!
Best media player/mp3 player Ive ever had/used.
I have the 4.0, and a friend of mine has the 5.0,
and the 5.0's screen does not look nearly as good as the 4.0!
Also,
Ive only owned this for a couple/few weeks now,
and have not rooted it yet...
But am sorely tempted to do so..
However, I have no windows OS on any of my machines,
So what's the best route for someone on a Linux machine, with no access to windohs?
Really don't want to have to use an emulator to run a .exe file. lol
I used SuperOneClick on my UK 5.0 and it worked fine to obtain root.
I also said yes to installing busybox permanently, which was perhaps a mistake as it segfaults when I try to run it.
I believe this is because the /system partition didn't have sufficient space for the binary (it had ~650kb space remaining when mounted rw after the su binary was installed), so it has been truncated (and hence doesn't run well )
This leads to a problem when trying to install busybox from anywhere else too, and to solve this I had to grab a static busybox binary (from Debian iirc) place it in /data and create a symlink to /system/xbin/busybox (need to remount the partition rw temporarily). I didn't bother to create the symlinks, but probably should do.
*delete post*
Followed the directions & tried several times using XP and W7 machines. Both get stuck at "Running psneuter..." (See below). Anyone else have this problem?
I tried w/ Debugging on and off. Also tried mounted and unmounted. Failed.
I tried closing GO launcher (which I read on another thread), and running stock. Failed.
I tried 3 different versions of KIES (Kies_2.0.0.11034_5, Kies_2.0.0.11033_25 & Kies_2.1.1.11124_17_6). Failed.
Any ideas?
-------------
Getting OS version...
2.3.5
OK
2.3.5
Pushing psneuter...
375 KS/c (585731 bytes in 1.523s)
OK
chmod psneuter...
OK
Running psneuter...
-stuck here-
---------- Post added at 04:34 PM ---------- Previous post was at 03:53 PM ----------
--Nevermind--
I ran an updated version of superone click and it worked. I was using 1.9.5 previously. 2.3.3.0 worked!
Rasa11 said:
Yeah, Pretty sure that's what they mean.
I also really like this device!
Best media player/mp3 player Ive ever had/used.
I have the 4.0, and a friend of mine has the 5.0,
and the 5.0's screen does not look nearly as good as the 4.0!
Also,
Ive only owned this for a couple/few weeks now,
and have not rooted it yet...
But am sorely tempted to do so..
However, I have no windows OS on any of my machines,
So what's the best route for someone on a Linux machine, with no access to windohs?
Really don't want to have to use an emulator to run a .exe file. lol
Click to expand...
Click to collapse
I was in the same boat as you. I love Linux, and hate Windows. But, I needed to root my device. Try this. It worked for my 5.0, and believe it should work for the 4.0. It uses the same zergRush exploit as Super One Click does. It's built on the same stuff as doomlord's root, too.
transportguy said:
Followed the directions & tried several times using XP and W7 machines. Both get stuck at "Running psneuter..." (See below). Anyone else have this problem?
I tried w/ Debugging on and off. Also tried mounted and unmounted. Failed.
I tried closing GO launcher (which I read on another thread), and running stock. Failed.
I tried 3 different versions of KIES (Kies_2.0.0.11034_5, Kies_2.0.0.11033_25 & Kies_2.1.1.11124_17_6). Failed.
Any ideas?
-------------
Getting OS version...
2.3.5
OK
2.3.5
Pushing psneuter...
375 KS/c (585731 bytes in 1.523s)
OK
chmod psneuter...
OK
Running psneuter...
-stuck here-
Click to expand...
Click to collapse
Try doomlords easy rooting toolkit, I used that and it rooted my galaxy player 4.0 easily.
link : forum.xda-developers.com/showthread.php?t=1321582
hope I helped!
apapousek said:
I was in the same boat as you. I love Linux, and hate Windows. But, I needed to root my device. Try this. It worked for my 5.0, and believe it should work for the 4.0. It uses the same zergRush exploit as Super One Click does. It's built on the same stuff as doomlord's root, too.
Click to expand...
Click to collapse
Excellent! Thanks very much man.
I appreciate it. <3
Does anyone know if this works for Android 2.3.6 on the US Player 4.0? I've been looking everywhere and can't find anything for 2.3.6 (which apparently patches the zergRush exploit).
TheTehk17 said:
Does anyone know if this works for Android 2.3.6 on the US Player 4.0? I've been looking everywhere and can't find anything for 2.3.6 (which apparently patches the zergRush exploit).
Click to expand...
Click to collapse
Flash either a custom rom or a custom kernel and then it is supposed to work.
The OP should be updated to reflect that the root won't work on 2.3.6 until a custom rom/kernel is installed.
zaclimon said:
Flash either a custom rom or a custom kernel and then it is supposed to work.
Click to expand...
Click to collapse
Which custom rom or kernel? I've been trying to figure out how to get started rooting my US 4.0 player with 2.3.6 and it's proving incredibly confusing. Is there anywhere that lists a step by step process?? I know I need to unlock the bootloader - can't find any specific info on that for my particular player. I know I need to flash a ROM or Kernel, but can't find specific info on which one works for 2.3.6 for the YP-G1. I just can't seem to find any real useful info on how to proceed - could anyone throw me a bone?
klemmaniac said:
Which custom rom or kernel? I've been trying to figure out how to get started rooting my US 4.0 player with 2.3.6 and it's proving incredibly confusing. Is there anywhere that lists a step by step process?? I know I need to unlock the bootloader - can't find any specific info on that for my particular player. I know I need to flash a ROM or Kernel, but can't find specific info on which one works for 2.3.6 for the YP-G1. I just can't seem to find any real useful info on how to proceed - could anyone throw me a bone?
Click to expand...
Click to collapse
First, you don't have to unlock any bootloader period. As far as the custom kernel goes, the only one that works well is TerraSilent. Because mostly everybody already switched up to a custom rom, GB was pretty much left up. I would recommend that you update your device when you'll have flashed a custom kernel or rooted your device.
Related
Hi all
I have a G2 touch that was stock and got the OTA update to 2.1 (t-mobile). But i decided I wanted root, not for developing just to get rid of a few system apps like stock and peep.
so i followed a few guides read lots of things and ended up having the generic htc rom 1.5 and rooted after making a gold card and downgrading. The problem was the OTA upgrade to 2.1 wouldnt install. (no groans from those that know what they are on about i'm new to this and thought it would upgrade )
as i like 2.1 more i ended up reflashing the stock 1.5 htc rom without having root and the OTA upgrade worked fine.
Now ive played with the generic htc 2.1 i actually prefer the t-mobile rom as it seems to have more in it like g-sensor calibration etc.
ive read several pages on here and other forums and now im just confused as to how to get a rooted version of the t-mobile 2.1 rom.
is it even possible?
if not and i do the full gold card and downgrade procedure again Which ROM will give me rooted 2.1 that is the closest to the t-mobile stock so i can remove the stock apps i want rid of?
sorry if it seems like an obvious question but i really dont get all this kernel, radio flashing, kitchens and all of that stuff i just want a simple rom i can put in and everything works like normal except i have root
thanks for your help
stevegb666 said:
Hi all
I have a G2 touch that was stock and got the OTA update to 2.1 (t-mobile). But i decided I wanted root, not for developing just to get rid of a few system apps like stock and peep.
so i followed a few guides read lots of things and ended up having the generic htc rom 1.5 and rooted after making a gold card and downgrading. The problem was the OTA upgrade to 2.1 wouldnt install. (no groans from those that know what they are on about i'm new to this and thought it would upgrade )
as i like 2.1 more i ended up reflashing the stock 1.5 htc rom without having root and the OTA upgrade worked fine.
Now ive played with the generic htc 2.1 i actually prefer the t-mobile rom as it seems to have more in it like g-sensor calibration etc.
ive read several pages on here and other forums and now im just confused as to how to get a rooted version of the t-mobile 2.1 rom.
is it even possible?
if not and i do the full gold card and downgrade procedure again Which ROM will give me rooted 2.1 that is the closest to the t-mobile stock so i can remove the stock apps i want rid of?
sorry if it seems like an obvious question but i really dont get all this kernel, radio flashing, kitchens and all of that stuff i just want a simple rom i can put in and everything works like normal except i have root
thanks for your help
Click to expand...
Click to collapse
I'm not aware of any T-Mobile 2.1 ROMs, as everyone wants to rid their phone of branding normally.
But... here's the best method for you. Install your old official 1.5 ROM, and then do the OTA update to 2.1. Make sure you install your T-Mobile 1.5 to do this.
Then, go to http://www.villainrom.co.uk/viewtopic.php?f=110&t=2096 and follow that guide to get a custom recovery image onto your phone. From there, you can use adb to access your handset as root, and add and remove stuff as you please. ADB info is in that guide, and a guide to removing apps is at http://www.villainrom.co.uk/viewtopic.php?f=46&t=862
HTH
PS. This won't give you everyday root, for things like root apps, since your ROM won't itself be rooted. But if you look up "Superuser.apk" and push that to /system/app (you'll learn about pushing etc with adb or googling 'adb push'), along with the su binary, you can give yourself basic root, though it won't be perfect.
If anyone else wants to help out, what you'll need is the 2 superuser files i mentioned, and a modified boot image that has the changed hero.prop (i think it's called that), with ro.secure set to 0 in the ramdisk.
But don't worry about this later stuff unless you need to.
Hi thanks very much for the help
i get the idea right up until the basic root bit, so think i will get that far .....after that you lost me
will i be able to use apps for rooted devices if i just get the basic root working?
stevegb666 said:
Hi thanks very much for the help
i get the idea right up until the basic root bit, so think i will get that far .....after that you lost me
will i be able to use apps for rooted devices if i just get the basic root working?
Click to expand...
Click to collapse
Should be able to. Give it a go That last bit wasn't intended for you, more for anyone who tries this in future and wants adb root access.
i've managed to hit another problem....
i'm trying to install the adb drivers and having trouble. i have the normal usb drivers installed and have downloaded the drivers from villanrom (it wont let me post the link sorry)
but when i tell it to install them i get a window pop up saying the driver contains no information for my device.
ive uninstalled the my htc drivers and tried again but i never get an adb device appear.
am i missing something obvious?
im using windows xp and have the hero set to pc sync when connected.
thanks
stevegb666 said:
i've managed to hit another problem....
i'm trying to install the adb drivers and having trouble. i have the normal usb drivers installed and have downloaded the drivers from villanrom (it wont let me post the link sorry)
but when i tell it to install them i get a window pop up saying the driver contains no information for my device.
ive uninstalled the my htc drivers and tried again but i never get an adb device appear.
am i missing something obvious?
im using windows xp and have the hero set to pc sync when connected.
thanks
Click to expand...
Click to collapse
Hmm OK. I know the issue. Find the driver folder, and use this file as the ini file
http://dl.dropbox.com/u/7618177/android_winusb.inf
I had to hack the file to make it recognise the hero
Hi guys my girlfriend bought a LG Viper 4G LTE and she told me to root it to remove the sprint crap, so I was wondering if anyone has already done this and if yes, can they tell me how to s-off + root + custom recovery + and probably custom ROM.
If anyone can help, please I'll appreciate it. Since I searched here for that phone and is not even listed.
The phone is running android 4.0.4, is this ICS or Jelly bean?
I do not know how to get into fast boot boot loader cause I don't think it is POWER + VOL DOWN.
Thanks in advanced
Have a nice day
:what::what::what::what::what::what:
Sent from my Nexus 10 using Tapatalk HD
Im trying to root mine right now and can't seem to get it to work, I've tried Root_with_Restore_by_Bin4ry_v21 and LG-Viper-ICS-Root-tool with no luck. If i get it to run all the way though and reboot it still comes up without root and with no super user. I am starting to think I may have to find a way to downgrade it and root from there.....Did you ever have any luck?
Update:
Check out post 17 here
http://forums.androidcentral.com/lg-viper-4g-lte/253022-cannot-root-viper-ics.html
here is the link for LS840ZVI :https://docs.google.com/file/d/0BzPBX7oKPGLOcno0dFVNUXByMVE/edit
I've downgraded and rooted so far and its working, I may look for a rom before i upgrade again.
Confirmed above!
jared_schaefer said:
Im trying to root mine right now and can't seem to get it to work, I've tried Root_with_Restore_by_Bin4ry_v21 and LG-Viper-ICS-Root-tool with no luck. If i get it to run all the way though and reboot it still comes up without root and with no super user. I am starting to think I may have to find a way to downgrade it and root from there.....Did you ever have any luck?
Update:
Check out post 17 here
http://forums.androidcentral.com/lg-viper-4g-lte/253022-cannot-root-viper-ics.html
here is the link for LS840ZVI :https://docs.google.com/file/d/0BzPBX7oKPGLOcno0dFVNUXByMVE/edit
I've downgraded and rooted so far and its working, I may look for a rom before i upgrade again.
Click to expand...
Click to collapse
I can confirm that the above will work. I have a refurbished Viper from Sprint that I got because my 3G radio quit sending. It would receive great, but couldn't send any MMS or upload anything while on 3G. 4G was great, just no joy on 3G. Strangest thing. Anyway, got the phone replaced, and on the replacement was of course the dreaded unrooted ZVK. Gotta have my root back...
So I decided to try all this stuff out, and It worked.
To add a little further info, if you've got a relatively bare install of Windows, especially XP, you might need BOTH the VisualC++ Runtime Redistributables from 2010 (mentioned in the above thread) AND the one from 2008! If you don't have both, the LG FlashTool will not run. You can find them on Microsoft's site.
Once the flash tool has successfully downgraded your Viper, make sure you perform a factory reset, as indicated in the instructions for the FlashTool. Then use the "Activate" app to get your 3G/4G on. After that, set up your Google account under "Accounts and Sync" in "Settings".
I did the whole operation completely on a linux system, using a virtual machine running Windows XP for the FlashTool, then the bash script from here: http://forum.xda-developers.com/showpost.php?p=43530152&postcount=3253 with the v.31 rooting tool from the original post in that thread.
I had to edit the script in a very minor way, as was pointed out by its author, so it could find my adb command. I just placed the path to that command in the line that said:
Code:
for test_adb in "adb" "stuff/adb"
in the place of the first "adb", so I got:
Code:
for test_adb in "/home/user/android-sdk-linux/platform-tools/adb" "stuff/adb"
Make sure to replace "user" with your username, without the quotes.
Then I stuck the script in the same folder as the runme.bat file. After the script and root tool had done their work, my phone had rebooted a total of three times, and I had a perfectly functional Superuser app!
Huge thanks to LoveMyAndroid2010 in the post linked above. Great script - some love for linux!
Now to get RootKeeper and upgrade back to ZVK...
The aforementioned root method worked for me. Since I've rooted, I've compiled my findings into another thread. I haven't been able to unlock the bootloader yet, unfortunately.
how to upgrade LG Viper to Jelly bean or higher
After I root as per instructions, how can I upgrade the OS?
Please help. I'm a newbie and would appreciate any help you may offer. Haven't rooted any phone before.
After scrounging, searching, hunting, and generally scrubbing every tree/rock/bush for answers, I have decided that it is time to post. As I am new to these forums, I sincerely appreciate any assistance in this matter. I have tried the only two methods that I can find to root my phone. the one by Bin4ry which is found at http://forum.xda-developers.com/showthread.php?t=1886460. and another one from a different site that was for JB. I have made sure that both debugging is on as well as allowing installations of non-market applications. I have tried every single usb mode, that just on the off chance, mine was that one phone that wanted to seperate itself from society. Since my phone is running ICS 4.0.4 I should be using Bin4ry's version, but I get stopped by this
Code:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (18.06.2013) v31 =
======================================================================
Device type:
1) New Standard-Root (thx Ariel Berkman)
2) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
3) Old
4) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 1
Please connect Device with enabled USB-Debugging to your Computer
Doing a Backup first, please confirm this on your device!
Now unlock your device and confirm the backup operation.
Done!
Press any key to continue . . .
Please select the RESTORE MY DATA option now on your device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot now ...
mount: Operation not permitted
3679 KB/s (380532 bytes in 0.101s)
2668 KB/s (1500495 bytes in 0.549s)
3647 KB/s (1165484 bytes in 0.312s)
remote object '/system/bin/ric' does not exist
.
Going to copy files to it's place
mount: permission denied (are you root?)
Rebooting again, please wait!
Could Not Find C:\Users\USERNAME\Desktop\newroot\ric
Restoring previous Backup! Please select the RESTORE MY DATA option now on your
device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot last time now ...
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
It says that It's done and that all is done, but I think that because the mounting permission was denied that it wasn't able to root the device. If I could get some assistance on this from someone with more experience, I'd appreciate it. Does anyone know how to fix/root this device? I don't know if this will make a difference or not but it says the software is VS840PP2
Bump, anyone know anything?
I wish someone would
cecpuman said:
Bump, anyone know anything?
Click to expand...
Click to collapse
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Rooted mine
D3d10ck said:
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Click to expand...
Click to collapse
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
Big thanks.Any roms that work on our phone?
---------- Post added at 02:16 AM ---------- Previous post was at 02:01 AM ----------
Can you post instructions on how to flash CM10?
Do i do standard Lucid downgrade to GB procedure?
Thanks in advance.
lviv73 said:
Big thanks.Any roms that work on our phone?
Click to expand...
Click to collapse
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
how to flash clockworkmod
scififan68 said:
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
Click to expand...
Click to collapse
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
You may have to install the baseband for the Exceed. I think in the CyanogenMod beta thread on AndroidForums there is a link but I'm not sure. Use ROM Manager to install CWM Recovery and then Flash CM10.
Vs840pp 4.1.2
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
scififan68 said:
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
Click to expand...
Click to collapse
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
ls5280 said:
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
Click to expand...
Click to collapse
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
scififan68 said:
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
Click to expand...
Click to collapse
Thanks a bunch, I thought it would be okay to do that but just wanted to make sure before doing it.
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
ls5280 said:
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
Click to expand...
Click to collapse
Glad to see you got CM 10 on this phone, since it runs pretty good, the only issue I had is the way it handles low signal areas, which is why I upgraded to the LG Spectrum plus I wanted Verizon 4G LTE.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
kibbles-n-bits said:
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
Click to expand...
Click to collapse
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Will I be stuck in activation mode?
scififan68 said:
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Click to expand...
Click to collapse
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
derekpoole890 said:
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
Click to expand...
Click to collapse
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation https://www.youtube.com/watch?v=8WGKCdlnt1s
wow how did i miss that one!
scififan68 said:
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation
Thanks for the link. I apologize for not researching that better. CM 10 here i come!
Click to expand...
Click to collapse
I know this is an old post but I just snuck and rooted the girlfriends LG Lucid VS840ZV9 / 4.0.4 / software update version 6.3.0_B7
tonight using spectrum_root_windows
http://www.mediafire.com/download/on6cnik4h0fo697/spectrum_root_windows.zip
So I have the ZTE Midnight (Z768G) and I am getting the classic "low on space" message and I know what rooting is as I rooted my Nook Tablet 4GB but I can't seem to find a root that will work for my phone so that I can set my default storage to the SD card and I was wondering if someone could help me. Or if there's alternatives to rooting it that would also be nice. I installed an app that can erase cache but it's not doing much for me right now. I can't even update my apps. Any help would be nice!!
-Luciano
Root ZTE Midnight using kingo root - works!
lucianodiaz5 said:
So I have the ZTE Midnight (Z768G) and I am getting the classic "low on space" message and I know what rooting is as I rooted my Nook Tablet 4GB but I can't seem to find a root that will work for my phone so that I can set my default storage to the SD card and I was wondering if someone could help me. Or if there's alternatives to rooting it that would also be nice. I installed an app that can erase cache but it's not doing much for me right now. I can't even update my apps. Any help would be nice!!
-Luciano
Click to expand...
Click to collapse
went to kingoapp.com and downloaded and ran the app against my ZTE Midnight from Net10 - I now have root access. I did not buy the phone to make calls - the $20 price tag for an Android test platform was too goo to pass up.
covergeek said:
went to kingoapp.com and downloaded and ran the app against my ZTE Midnight from Net10 - I now have root access. I did not buy the phone to make calls - the $20 price tag for an Android test platform was too goo to pass up.
Click to expand...
Click to collapse
It worked but now I can't move the apps over to the SD card like I wanted to. I tried doing the /System app mover method of turning system apps to normal apps and uninstalling but it's still giving me that message.
Find the posts dealing with zte and link2sd. I am able to now install anything without space worries
Sent from my Z768G using xda app-developers app
Question:
After Rooting, can anyone install CWM & Install Custom ROM?
I'm looking to Root, Install CWM, then Install Custom ROM for Android v4.0 or higher.
Anyone successfully Rooted & Updated to Android v4.0 or higher.
Please advise. Thank you!
*** UPDATE: Kingo Android ROOT = ROOTED my (NET10) ZTE Z768G ***
*** LOOKING: Custom Recovery & Custom ROM (Android v4.0 or higher) **** Anyone ???
dtkool said:
Question:
After Rooting, can anyone install CWM & Install Custom ROM?
I'm looking to Root, Install CWM, then Install Custom ROM for Android v4.0 or higher.
Anyone successfully Rooted & Updated to Android v4.0 or higher.
Please advise. Thank you!
*** UPDATE: Kingo Android ROOT = ROOTED my (NET10) ZTE Z768G ***
*** LOOKING: Custom Recovery & Custom ROM (Android v4.0 or higher) **** Anyone ???
Click to expand...
Click to collapse
What drivers did you use to get Kingo Android Root to work? Nothing seems to be working for me...
ZTE Midnight!!!! No luck
I am having no luck with root.... tried all
How?
covergeek said:
went to kingoapp.com and downloaded and ran the app against my ZTE Midnight from Net10 - I now have root access. I did not buy the phone to make calls - the $20 price tag for an Android test platform was too goo to pass up.
Click to expand...
Click to collapse
How did you get kingoroot to run? I get stuck at "Installing Drivers" forever. I've tried installing my own drivers, both the included ones from the phone's internal memory as well as the latest ones from ZTE, and the ZTE ones that kingoroot points me to in the troubleshooting section. I'm running Win8 and I've also tried disabling Signed Driver Verification. What is the magic spell to get this thing to run? I agree $20 is *****in if I can just get the thing rooted so I can install more than 1 app and *cough* turn on tethering
jawa6988 said:
How did you get kingoroot to run? I get stuck at "Installing Drivers" forever. I've tried installing my own drivers, both the included ones from the phone's internal memory as well as the latest ones from ZTE, and the ZTE ones that kingoroot points me to in the troubleshooting section. I'm running Win8 and I've also tried disabling Signed Driver Verification. What is the magic spell to get this thing to run? I agree $20 is *****in if I can just get the thing rooted so I can install more than 1 app and *cough* turn on tethering
Click to expand...
Click to collapse
Haha that's the point right xD $20 hot spot! But I agree. Nothing seems to be working ATM... Too much bloatware and need to get started on a CM nightly...
Right
wireproof said:
Haha that's the point right xD $20 hot spot! But I agree. Nothing seems to be working ATM... Too much bloatware and need to get started on a CM nightly...
Click to expand...
Click to collapse
Seriously, I left it sitting all night to see if it would ever start to download. The help section says that it's stalling on Driver Verification and to disablle it, but it makes no difference. I have trouble believing that's the problem since it won't even download the driver, how can it even try to "verify" it. Besides that fact that I have the latest driver from the manufacturer and have tried the one from the link in their help pages to the ZTE driver. Is there no command line option to skip the driver installation and just see if it will run? I know i can access it by adb. OR does anyone know of a method to root this thing manually? I'm not skeered to use terminal and dox boxes, but I'd rather not do it blind. THis phone is nearly useless to me without root especialy since i just figured out why I get no signal... It's a damn T-Mobile based device. It's doesn't say this ANYWHERE on the box or documentation. I should have researched it first as I usually do, but I got too excited by the idea of a droid for $20. I thought, at least if it doesn't work, it will be a toy for my 5 year old... But even he will want to install more than 1 teeny app LOL
With a custom 4.2 or later rom and good signal this thing would be.... OK... not great, but not too bad either. It isn't all that slow as I was afraid. Kit Kat might be great on it
Will a root method from any other ZTE devices work for the Midnight? I read that it might possible be the same as the ZTE Concord from t-mobile, but I tried a root method for it using a jcase update.zip, but it did not work. I'm at a loss. I've never had this much trouble getting one rooted. Apparently this device just wasn't popular enough
jawa6988 said:
Seriously, I left it sitting all night to see if it would ever start to download. The help section says that it's stalling on Driver Verification and to disablle it, but it makes no difference. I have trouble believing that's the problem since it won't even download the driver, how can it even try to "verify" it. Besides that fact that I have the latest driver from the manufacturer and have tried the one from the link in their help pages to the ZTE driver. Is there no command line option to skip the driver installation and just see if it will run? I know i can access it by adb. OR does anyone know of a method to root this thing manually? I'm not skeered to use terminal and dox boxes, but I'd rather not do it blind. THis phone is nearly useless to me without root especialy since i just figured out why I get no signal... It's a damn T-Mobile based device. It's doesn't say this ANYWHERE on the box or documentation. I should have researched it first as I usually do, but I got too excited by the idea of a droid for $20. I thought, at least if it doesn't work, it will be a toy for my 5 year old... But even he will want to install more than 1 teeny app LOL
With a custom 4.2 or later rom and good signal this thing would be.... OK... not great, but not too bad either. It isn't all that slow as I was afraid. Kit Kat might be great on it
Will a root method from any other ZTE devices work for the Midnight? I read that it might possible be the same as the ZTE Concord from t-mobile, but I tried a root method for it using a jcase update.zip, but it did not work. I'm at a loss. I've never had this much trouble getting one rooted. Apparently this device just wasn't popular enough
Click to expand...
Click to collapse
I tried the root method for the T-Mobile branded version of the phone... I have the NET10 GSM version.. Nothing seems to be working either. Not even Gingerbreak... This is a freaking NET10 phone... And Kit Kat would be nice on this phone! 800 mhz processor and 512MB RAM so it should work well.
I just bought this phone too. It comes with CM 2.3.7 installed on it. I"m wanting a KitKat ROM. I'm hoping my by Wambo_Bomb will compile a version of his BlakAndroid for the ZTE Midnight. I've asked him to do so. He said he needs the modules an Kernel info to do it. If he does come through for me, I will share with everyone.
ROOTED!!!
I just wanted to come back and let you guys know: After A few days and much frustration, I tried Kingoapp.com again and it worked flawlessly on the first try, so now I'm rooted and able to run root apps on my rooted stock rom. Now does anyone know of a way to get a custom recovery on this phone? And if there are any cutom roms available yet? If your friend does compile a rom, I'd be happy to help with testing.
---------- Post added at 10:34 AM ---------- Previous post was at 10:29 AM ----------
Sleepycloud said:
I just bought this phone too. It comes with CM 2.3.7 installed on it. I"m wanting a KitKat ROM. I'm hoping my by Wambo_Bomb will compile a version of his BlakAndroid for the ZTE Midnight. I've asked him to do so. He said he needs the modules an Kernel info to do it. If he does come through for me, I will share with everyone.
Click to expand...
Click to collapse
Mine is now rooted, so let me know if you need me to dig out any files and send them to you. I can't make a full nandroid yet, but I can get in there with FTP or adb and hopefully get anything you need
---------- Post added at 10:51 AM ---------- Previous post was at 10:34 AM ----------
wireproof said:
What drivers did you use to get Kingo Android Root to work? Nothing seems to be working for me...
Click to expand...
Click to collapse
Try Kingoapp again. The server issue appears to be fixed. I did try from a fresh clean install of Win8, but I had tried that before and it stalled at installing drivers, so maybe had nothing to do with it. I simply connected the phone, installed drivers from internal memory (appeared as "CD-ROM in Win8), enabled development mode, then ran Kingoapp and it worked flawlessly. Good luck. The more people we get rooted, the better the custom ROMS will become I hope
GOT ROOT!!! cool thanks. now what... no roms yet?
sorry to steal the thread but does anyone know how to unlock sim for tmobile.
I was able to root the zte midnight using kingo root. So now Im looking for cwm and a custom rom for this phone. Does anyone know if any are out for this phone?
ultravioletnanokitty started a developers thread but i cant post on there to motivate them...
http://forum.xda-developers.com/showthread.php?t=2715570
I need a custom recovery for this phone, i will donate 50 USD if somebody help me to convert z768g to v768. So i could be able to Unlock it. Please help.
zte miniget10 phones root
ok I was having same problems do this plug device to pc go to thispc or my computer click on your phone and it will install right drivers and use kingo and your done figured th out 20mins into trying to root I bought this device just todo this to fiue out for have a nice day
---------- Post added at 10:01 PM ---------- Previous post was at 09:44 PM ----------
datboirobbie said:
ok I was having same problems do this plug device to pc go to thispc or my computer click on your phone and it will install right drivers and use kingo and your done figured th out 20mins into trying to root I bought this device just todo this to fiue out for have a nice day
Click to expand...
Click to collapse
sorry misspelled it zte midnight
ZTE midnight root???
has anyone ever found a root for zte z828tl??
What version of kingo?
For the last two years I have been going back and forth between my Note 2 that was Stock Rooted on 4.1.2 and my un-Rooted Note 2 fully stock on 4.4.2. Each had their advantages
I had all but given up
Now thanks to GhettoRoot I have the best of both worlds.:highfive:
I would like to hear what is COOL about having Root on 4.4.2.
You newbies to 4.4.2 check out the Active apps widget . it only takes up one space on the home screen. It is a must have.
Because of GhettoRoot XDA will need to redo Most of the Verizon Note 2 Forum. AdamOutler's Root is obsolete, Thanks for the good times Adam
doctor-cool said:
For the last two years I have been going back and forth between my Note 2 that was Stock Rooted on 4.1.2 and my un-Rooted Note 2 fully stock on 4.4.2. Each had their advantages
I had all but given up
Now thanks to GhettoRoot I have the best of both worlds.:highfive:
I would like to hear what is COOL about having Root on 4.4.2.
You newbies to 4.4.2 check out the Active apps widget . it only takes up one space on the home screen. It is a must have.
Because of GhettoRoot XDA will need to redo Most of the Verizon Note 2 Forum. AdamOutler's Root is obsolete, Thanks for the good times Adam
Click to expand...
Click to collapse
AdamOutler's Root is obsolete, Thanks for the good times
Click to expand...
Click to collapse
Adam has done A LOT for this community especially for Samsung phone in general.. His work is NOT obsolete and he still very involved on this forum. I am not friends with him or do I know him but he was the master mind behind unlocking/exploiting Verizons bootloader.. which currently on 4.3 and 4.4.3 is still not possible. This is most likely do to him not having the phone and the phones age..
SOo I hope I got the wrong impression from your statement.. Bc that man you mentioned.. Is a LEGEND.. Hands down
Just to confirm, Ghettoroot does not work on 4.4.2 baseband ND7. Is that correct?
Sent from my Galaxy Note 2 using Tapatalk
11/9/14 Update. I successfully rooted with GhettoRoot with Note 2 running Android 4.4.2 and baseband ND7 (Verizon). Required SDK install and Note 2 Android drivers for Windows first.
jtsmall said:
11/9/14 Update. I successfully rooted with GhettoRoot with Note 2 running Android 4.4.2 and baseband ND7 (Verizon). Required SDK install and Note 2 Android drivers for Windows first.
Click to expand...
Click to collapse
I also had success using GhettoRoot from this post:
http://forum.xda-developers.com/showpost.php?p=55210343&postcount=27
ADB from this post:
http://forum.xda-developers.com/showthread.php?t=2588979
Koush's universal android drivers from here:
https://github.com/koush/UniversalAdbDriver
Yes, that's it. Samsung's drivers work for me.
Sent from my Galaxy Note 2 using Tapatalk
travisn000 said:
I also had success using GhettoRoot from this post:
http://forum.xda-developers.com/showpost.php?p=55210343&postcount=27
ADB from this post:
http://forum.xda-developers.com/showthread.php?t=2588979
Koush's universal android drivers from here:
https://github.com/koush/UniversalAdbDriver
Click to expand...
Click to collapse
crossing fingers
shissler said:
crossing fingers
Click to expand...
Click to collapse
woot woot im rooted..lol now what way to go
shissler said:
woot woot im rooted..lol now what way to go
Click to expand...
Click to collapse
I used it to replace the APN config file in my wife's phone for use on other carriers (T-Mobile & international use):
http://forum.xda-developers.com/showpost.php?p=57070787&postcount=7
It worked great for up to HSDPA+ speeds, but no LTE.. ..then she left the phone on top of her car; it fell off in traffic and got run over.. maybe this will help someone else!
Before it got smashed, I had planned on trying the following thread out next (for the VZW Note 3) to see if I could get LTE working on T-Mobile:
http://forum.xda-developers.com/showthread.php?t=2530523
travisn000 said:
I also had success using GhettoRoot from this post:
http://forum.xda-developers.com/showpost.php?p=55210343&postcount=27
ADB from this post:
http://forum.xda-developers.com/showthread.php?t=2588979
Koush's universal android drivers from here:
https://github.com/koush/UniversalAdbDriver
Click to expand...
Click to collapse
nothing works for me.
I have Verizon Note 2 with version 4.4.2 and ND7
it says "error: device not found" 6 times
samloves said:
nothing works for me.
I have Verizon Note 2 with version 4.4.2 and ND7
it says "error: device not found" 6 times
Click to expand...
Click to collapse
I followed travis's post and mine is rooted now with superuser access.
My only question now is what method do we use to install twrp or cwm on this nd7 rooted note 2 with 4.4.2?
Can we use odin and just flash the latest twrp or is there another workaround?
zbomb5610 said:
I followed travis's post and mine is rooted now with superuser access.
My only question now is what method do we use to install twrp or cwm on this nd7 rooted note 2 with 4.4.2?
Can we use odin and just flash the latest twrp or is there another workaround?
Click to expand...
Click to collapse
In order to install a custom recovery, you have to have an unlocked bootloader. At this moment, there is no do it yourself method to unlock the bootloader on factory stock 4.4.2, so you can't install CWM/PHILZ or TWRP. For about $75 I think... you can send your phone off to a company that uses special equipment to downgrade your phone to 4.1.2... then you would be able to unlock the bootloader.... Otherwise, the most you can do right now is root the device and make modifications that don't require unlocked bootloader (e.g. debloat, install Xposed modules, etc...). An XDA user named Beastmode is working on trying to get a modified version of TWRP called Safestrap working for 4.4.2 which wouldn't require an unlocked bootloader, so you may want to keep an eye on that thread here: http://forum.xda-developers.com/showthread.php?p=57190369
Thanks for the reply. I figured that was the case. I had 4.1.2 a few days ago also and figured "hey, i haven't updated in over a year" and didn't read into it enough and then upgraded to stock ota 4.4.2 so that sucks. I guess I can live with it like this for now till a fix comes out if one does.
also having trouble
I also have been having trouble rooting my note2 with 4.4.2. I followed travis' approach and I got the 6 device not found errors. Am I not installing the correct drivers? Any help or information is greatly appreciated.
UPDATE: Just got it to work. Will post soon what I was doing wrong and what I did to correct it.
I was able to get GhettoRoot to find my device once and the install failed. Now no matter what I do including removing and adding drivers it says it cannot see your Android device. Is there a trick i'm missing?
travisn000 said:
I also had success using GhettoRoot from this post:
http://forum.xda-developers.com/showpost.php?p=55210343&postcount=27
ADB from this post:
http://forum.xda-developers.com/showthread.php?t=2588979
Koush's universal android drivers from here:
https://github.com/koush/UniversalAdbDriver
Click to expand...
Click to collapse
---------- Post added at 08:43 PM ---------- Previous post was at 08:37 PM ----------
I had something similar happen to me. The very first time I ran GhettoRoot it found my device and tried to install but failed. Now, it won't find device no matter what I do.
IceCo1d said:
I also have been having trouble rooting my note2 with 4.4.2. I followed travis' approach and I got the 6 device not found errors. Am I not installing the correct drivers? Any help or information is greatly appreciated.
Click to expand...
Click to collapse
for me a message came up on my phone asking for permission and then i was able to root after installing the drivers.
I just had to accept on my phone first for it to actually work.
popdevil said:
I was able to get GhettoRoot to find my device once and the install failed. Now no matter what I do including removing and adding drivers it says it cannot see your Android device. Is there a trick i'm missing?
---------- Post added at 08:43 PM ---------- Previous post was at 08:37 PM ----------
I had something similar happen to me. The very first time I ran GhettoRoot it found my device and tried to install but failed. Now, it won't find device no matter what I do.
Click to expand...
Click to collapse
The part you are talking about does not come up until after the command prompt finds your device. Then you get the message to accept. That message came up the very first time but now it will not find the device for me to get to that part.
zbomb5610 said:
for me a message came up on my phone asking for permission and then i was able to root after installing the drivers.
I just had to accept on my phone first for it to actually work.
Click to expand...
Click to collapse
popdevil said:
I was able to get GhettoRoot to find my device once and the install failed. Now no matter what I do including removing and adding drivers it says it cannot see your Android device. Is there a trick i'm missing?
---------- Post added at 08:43 PM ---------- Previous post was at 08:37 PM ----------
I had something similar happen to me. The very first time I ran GhettoRoot it found my device and tried to install but failed. Now, it won't find device no matter what I do.
Click to expand...
Click to collapse
I had similar issues with some of my trials.. ...try turning developer mode off and on, plug in and then give the phone 30-90 seconds or so for installer mode to time out and verify the device is in MTP or PTP mode.
Just rooted my Note 2 running 4.4.2
Ok gang, so after about a week of trying every method to root my phone I finally got it to work. I'm going to tell you what I was doing wrong and what you can check to see where you are messing up. Hope this helps someone.
The issue I kept running into was that my device could not be found. I would run Ghettoroot and it would just tell me error device not found. This made no sense because I could get Kies to work and the bubble in the lower right corner that says installing device drivers would always succeed. However if I went into Device Manager (on the computer) there was a little yellow exclamation point next to my device. After looking in to the properties it said there were no drivers installed.
Also if you open a command prompt and type "adb devices" (with your phone plugged in) it should show you your device, if nothing comes up then the drivers are not properly installed.
So... First check that drivers are properly installed in your Device Manager (again this is on your computer), and then open a cmd window and type adb devices to see if your phone shows up. If it does then you are ready to use Ghettoroot.
I used this Ghettoroot:
http://forum.xda-developers.com/showpost.php?p=55210343&postcount=27
and the drivers I used were called:
SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0 (I can't remember where I DLed it from, sorry)
Also, if you are interested. My method for figuring out what was wrong started by right clicking on the GhettoRoot .bat file to see the sequence cmd commands. They began with adb commands and I then googled to see how to check that the command would work. That is when I stumbled on the comman "adb devices" to make sure my phone was properly connected.
I hope this helps someone and if I can help in any other way just ask!
Heimdahl? Odin?
mattnmag said:
In order to install a custom recovery, you have to have an unlocked bootloader. At this moment, there is no do it yourself method to unlock the bootloader on factory stock 4.4.2, so you can't install CWM/PHILZ or TWRP. For about $75 I think... you can send your phone off to a company that uses special equipment to downgrade your phone to 4.1.2... then you would be able to unlock the bootloader.... Otherwise, the most you can do right now is root the device and make modifications that don't require unlocked bootloader (e.g. debloat, install Xposed modules, etc...). An XDA user named Beastmode is working on trying to get a modified version of TWRP called Safestrap working for 4.4.2 which wouldn't require an unlocked bootloader, so you may want to keep an eye on that thread here: http://forum.xda-developers.com/showthread.php?p=57190369
Click to expand...
Click to collapse
I've only had this phone a week. My vs980 fractured :crying: now I'm stuck with this "thing" which I've done nothing with as I'm still trying to figure out WHAT never mind how. There's so much bloat I'm thinking AOSP. But how?
So far, ghetto-root hasn't worked for me but have removed Kaspersky etc to see if that was the problem. Then worry abt boot loader. Am on Pageplus Carrier so there wont be any OTA updates
Is there any merrit in the "Heimdahl" (??) method shown here CYANOGENMOD
I've read some of people using Odin to load pre-rooted stock image (and have found the images... but... )
I bricked the vs980 playing too fast and not waiting for answers. (learned a thing or 2 unbricking it)
So am I correct in understanding that you can no longer "Drop" an Un****** version of the factory image into the phone? By any means?
THANKS
VW