For the last two years I have been going back and forth between my Note 2 that was Stock Rooted on 4.1.2 and my un-Rooted Note 2 fully stock on 4.4.2. Each had their advantages
I had all but given up
Now thanks to GhettoRoot I have the best of both worlds.:highfive:
I would like to hear what is COOL about having Root on 4.4.2.
You newbies to 4.4.2 check out the Active apps widget . it only takes up one space on the home screen. It is a must have.
Because of GhettoRoot XDA will need to redo Most of the Verizon Note 2 Forum. AdamOutler's Root is obsolete, Thanks for the good times Adam
doctor-cool said:
For the last two years I have been going back and forth between my Note 2 that was Stock Rooted on 4.1.2 and my un-Rooted Note 2 fully stock on 4.4.2. Each had their advantages
I had all but given up
Now thanks to GhettoRoot I have the best of both worlds.:highfive:
I would like to hear what is COOL about having Root on 4.4.2.
You newbies to 4.4.2 check out the Active apps widget . it only takes up one space on the home screen. It is a must have.
Because of GhettoRoot XDA will need to redo Most of the Verizon Note 2 Forum. AdamOutler's Root is obsolete, Thanks for the good times Adam
Click to expand...
Click to collapse
AdamOutler's Root is obsolete, Thanks for the good times
Click to expand...
Click to collapse
Adam has done A LOT for this community especially for Samsung phone in general.. His work is NOT obsolete and he still very involved on this forum. I am not friends with him or do I know him but he was the master mind behind unlocking/exploiting Verizons bootloader.. which currently on 4.3 and 4.4.3 is still not possible. This is most likely do to him not having the phone and the phones age..
SOo I hope I got the wrong impression from your statement.. Bc that man you mentioned.. Is a LEGEND.. Hands down
Just to confirm, Ghettoroot does not work on 4.4.2 baseband ND7. Is that correct?
Sent from my Galaxy Note 2 using Tapatalk
11/9/14 Update. I successfully rooted with GhettoRoot with Note 2 running Android 4.4.2 and baseband ND7 (Verizon). Required SDK install and Note 2 Android drivers for Windows first.
jtsmall said:
11/9/14 Update. I successfully rooted with GhettoRoot with Note 2 running Android 4.4.2 and baseband ND7 (Verizon). Required SDK install and Note 2 Android drivers for Windows first.
Click to expand...
Click to collapse
I also had success using GhettoRoot from this post:
http://forum.xda-developers.com/showpost.php?p=55210343&postcount=27
ADB from this post:
http://forum.xda-developers.com/showthread.php?t=2588979
Koush's universal android drivers from here:
https://github.com/koush/UniversalAdbDriver
Yes, that's it. Samsung's drivers work for me.
Sent from my Galaxy Note 2 using Tapatalk
travisn000 said:
I also had success using GhettoRoot from this post:
http://forum.xda-developers.com/showpost.php?p=55210343&postcount=27
ADB from this post:
http://forum.xda-developers.com/showthread.php?t=2588979
Koush's universal android drivers from here:
https://github.com/koush/UniversalAdbDriver
Click to expand...
Click to collapse
crossing fingers
shissler said:
crossing fingers
Click to expand...
Click to collapse
woot woot im rooted..lol now what way to go
shissler said:
woot woot im rooted..lol now what way to go
Click to expand...
Click to collapse
I used it to replace the APN config file in my wife's phone for use on other carriers (T-Mobile & international use):
http://forum.xda-developers.com/showpost.php?p=57070787&postcount=7
It worked great for up to HSDPA+ speeds, but no LTE.. ..then she left the phone on top of her car; it fell off in traffic and got run over.. maybe this will help someone else!
Before it got smashed, I had planned on trying the following thread out next (for the VZW Note 3) to see if I could get LTE working on T-Mobile:
http://forum.xda-developers.com/showthread.php?t=2530523
travisn000 said:
I also had success using GhettoRoot from this post:
http://forum.xda-developers.com/showpost.php?p=55210343&postcount=27
ADB from this post:
http://forum.xda-developers.com/showthread.php?t=2588979
Koush's universal android drivers from here:
https://github.com/koush/UniversalAdbDriver
Click to expand...
Click to collapse
nothing works for me.
I have Verizon Note 2 with version 4.4.2 and ND7
it says "error: device not found" 6 times
samloves said:
nothing works for me.
I have Verizon Note 2 with version 4.4.2 and ND7
it says "error: device not found" 6 times
Click to expand...
Click to collapse
I followed travis's post and mine is rooted now with superuser access.
My only question now is what method do we use to install twrp or cwm on this nd7 rooted note 2 with 4.4.2?
Can we use odin and just flash the latest twrp or is there another workaround?
zbomb5610 said:
I followed travis's post and mine is rooted now with superuser access.
My only question now is what method do we use to install twrp or cwm on this nd7 rooted note 2 with 4.4.2?
Can we use odin and just flash the latest twrp or is there another workaround?
Click to expand...
Click to collapse
In order to install a custom recovery, you have to have an unlocked bootloader. At this moment, there is no do it yourself method to unlock the bootloader on factory stock 4.4.2, so you can't install CWM/PHILZ or TWRP. For about $75 I think... you can send your phone off to a company that uses special equipment to downgrade your phone to 4.1.2... then you would be able to unlock the bootloader.... Otherwise, the most you can do right now is root the device and make modifications that don't require unlocked bootloader (e.g. debloat, install Xposed modules, etc...). An XDA user named Beastmode is working on trying to get a modified version of TWRP called Safestrap working for 4.4.2 which wouldn't require an unlocked bootloader, so you may want to keep an eye on that thread here: http://forum.xda-developers.com/showthread.php?p=57190369
Thanks for the reply. I figured that was the case. I had 4.1.2 a few days ago also and figured "hey, i haven't updated in over a year" and didn't read into it enough and then upgraded to stock ota 4.4.2 so that sucks. I guess I can live with it like this for now till a fix comes out if one does.
also having trouble
I also have been having trouble rooting my note2 with 4.4.2. I followed travis' approach and I got the 6 device not found errors. Am I not installing the correct drivers? Any help or information is greatly appreciated.
UPDATE: Just got it to work. Will post soon what I was doing wrong and what I did to correct it.
I was able to get GhettoRoot to find my device once and the install failed. Now no matter what I do including removing and adding drivers it says it cannot see your Android device. Is there a trick i'm missing?
travisn000 said:
I also had success using GhettoRoot from this post:
http://forum.xda-developers.com/showpost.php?p=55210343&postcount=27
ADB from this post:
http://forum.xda-developers.com/showthread.php?t=2588979
Koush's universal android drivers from here:
https://github.com/koush/UniversalAdbDriver
Click to expand...
Click to collapse
---------- Post added at 08:43 PM ---------- Previous post was at 08:37 PM ----------
I had something similar happen to me. The very first time I ran GhettoRoot it found my device and tried to install but failed. Now, it won't find device no matter what I do.
IceCo1d said:
I also have been having trouble rooting my note2 with 4.4.2. I followed travis' approach and I got the 6 device not found errors. Am I not installing the correct drivers? Any help or information is greatly appreciated.
Click to expand...
Click to collapse
for me a message came up on my phone asking for permission and then i was able to root after installing the drivers.
I just had to accept on my phone first for it to actually work.
popdevil said:
I was able to get GhettoRoot to find my device once and the install failed. Now no matter what I do including removing and adding drivers it says it cannot see your Android device. Is there a trick i'm missing?
---------- Post added at 08:43 PM ---------- Previous post was at 08:37 PM ----------
I had something similar happen to me. The very first time I ran GhettoRoot it found my device and tried to install but failed. Now, it won't find device no matter what I do.
Click to expand...
Click to collapse
The part you are talking about does not come up until after the command prompt finds your device. Then you get the message to accept. That message came up the very first time but now it will not find the device for me to get to that part.
zbomb5610 said:
for me a message came up on my phone asking for permission and then i was able to root after installing the drivers.
I just had to accept on my phone first for it to actually work.
Click to expand...
Click to collapse
popdevil said:
I was able to get GhettoRoot to find my device once and the install failed. Now no matter what I do including removing and adding drivers it says it cannot see your Android device. Is there a trick i'm missing?
---------- Post added at 08:43 PM ---------- Previous post was at 08:37 PM ----------
I had something similar happen to me. The very first time I ran GhettoRoot it found my device and tried to install but failed. Now, it won't find device no matter what I do.
Click to expand...
Click to collapse
I had similar issues with some of my trials.. ...try turning developer mode off and on, plug in and then give the phone 30-90 seconds or so for installer mode to time out and verify the device is in MTP or PTP mode.
Just rooted my Note 2 running 4.4.2
Ok gang, so after about a week of trying every method to root my phone I finally got it to work. I'm going to tell you what I was doing wrong and what you can check to see where you are messing up. Hope this helps someone.
The issue I kept running into was that my device could not be found. I would run Ghettoroot and it would just tell me error device not found. This made no sense because I could get Kies to work and the bubble in the lower right corner that says installing device drivers would always succeed. However if I went into Device Manager (on the computer) there was a little yellow exclamation point next to my device. After looking in to the properties it said there were no drivers installed.
Also if you open a command prompt and type "adb devices" (with your phone plugged in) it should show you your device, if nothing comes up then the drivers are not properly installed.
So... First check that drivers are properly installed in your Device Manager (again this is on your computer), and then open a cmd window and type adb devices to see if your phone shows up. If it does then you are ready to use Ghettoroot.
I used this Ghettoroot:
http://forum.xda-developers.com/showpost.php?p=55210343&postcount=27
and the drivers I used were called:
SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0 (I can't remember where I DLed it from, sorry)
Also, if you are interested. My method for figuring out what was wrong started by right clicking on the GhettoRoot .bat file to see the sequence cmd commands. They began with adb commands and I then googled to see how to check that the command would work. That is when I stumbled on the comman "adb devices" to make sure my phone was properly connected.
I hope this helps someone and if I can help in any other way just ask!
Heimdahl? Odin?
mattnmag said:
In order to install a custom recovery, you have to have an unlocked bootloader. At this moment, there is no do it yourself method to unlock the bootloader on factory stock 4.4.2, so you can't install CWM/PHILZ or TWRP. For about $75 I think... you can send your phone off to a company that uses special equipment to downgrade your phone to 4.1.2... then you would be able to unlock the bootloader.... Otherwise, the most you can do right now is root the device and make modifications that don't require unlocked bootloader (e.g. debloat, install Xposed modules, etc...). An XDA user named Beastmode is working on trying to get a modified version of TWRP called Safestrap working for 4.4.2 which wouldn't require an unlocked bootloader, so you may want to keep an eye on that thread here: http://forum.xda-developers.com/showthread.php?p=57190369
Click to expand...
Click to collapse
I've only had this phone a week. My vs980 fractured :crying: now I'm stuck with this "thing" which I've done nothing with as I'm still trying to figure out WHAT never mind how. There's so much bloat I'm thinking AOSP. But how?
So far, ghetto-root hasn't worked for me but have removed Kaspersky etc to see if that was the problem. Then worry abt boot loader. Am on Pageplus Carrier so there wont be any OTA updates
Is there any merrit in the "Heimdahl" (??) method shown here CYANOGENMOD
I've read some of people using Odin to load pre-rooted stock image (and have found the images... but... )
I bricked the vs980 playing too fast and not waiting for answers. (learned a thing or 2 unbricking it)
So am I correct in understanding that you can no longer "Drop" an Un****** version of the factory image into the phone? By any means?
THANKS
VW
Related
Hi guys my girlfriend bought a LG Viper 4G LTE and she told me to root it to remove the sprint crap, so I was wondering if anyone has already done this and if yes, can they tell me how to s-off + root + custom recovery + and probably custom ROM.
If anyone can help, please I'll appreciate it. Since I searched here for that phone and is not even listed.
The phone is running android 4.0.4, is this ICS or Jelly bean?
I do not know how to get into fast boot boot loader cause I don't think it is POWER + VOL DOWN.
Thanks in advanced
Have a nice day
:what::what::what::what::what::what:
Sent from my Nexus 10 using Tapatalk HD
Im trying to root mine right now and can't seem to get it to work, I've tried Root_with_Restore_by_Bin4ry_v21 and LG-Viper-ICS-Root-tool with no luck. If i get it to run all the way though and reboot it still comes up without root and with no super user. I am starting to think I may have to find a way to downgrade it and root from there.....Did you ever have any luck?
Update:
Check out post 17 here
http://forums.androidcentral.com/lg-viper-4g-lte/253022-cannot-root-viper-ics.html
here is the link for LS840ZVI :https://docs.google.com/file/d/0BzPBX7oKPGLOcno0dFVNUXByMVE/edit
I've downgraded and rooted so far and its working, I may look for a rom before i upgrade again.
Confirmed above!
jared_schaefer said:
Im trying to root mine right now and can't seem to get it to work, I've tried Root_with_Restore_by_Bin4ry_v21 and LG-Viper-ICS-Root-tool with no luck. If i get it to run all the way though and reboot it still comes up without root and with no super user. I am starting to think I may have to find a way to downgrade it and root from there.....Did you ever have any luck?
Update:
Check out post 17 here
http://forums.androidcentral.com/lg-viper-4g-lte/253022-cannot-root-viper-ics.html
here is the link for LS840ZVI :https://docs.google.com/file/d/0BzPBX7oKPGLOcno0dFVNUXByMVE/edit
I've downgraded and rooted so far and its working, I may look for a rom before i upgrade again.
Click to expand...
Click to collapse
I can confirm that the above will work. I have a refurbished Viper from Sprint that I got because my 3G radio quit sending. It would receive great, but couldn't send any MMS or upload anything while on 3G. 4G was great, just no joy on 3G. Strangest thing. Anyway, got the phone replaced, and on the replacement was of course the dreaded unrooted ZVK. Gotta have my root back...
So I decided to try all this stuff out, and It worked.
To add a little further info, if you've got a relatively bare install of Windows, especially XP, you might need BOTH the VisualC++ Runtime Redistributables from 2010 (mentioned in the above thread) AND the one from 2008! If you don't have both, the LG FlashTool will not run. You can find them on Microsoft's site.
Once the flash tool has successfully downgraded your Viper, make sure you perform a factory reset, as indicated in the instructions for the FlashTool. Then use the "Activate" app to get your 3G/4G on. After that, set up your Google account under "Accounts and Sync" in "Settings".
I did the whole operation completely on a linux system, using a virtual machine running Windows XP for the FlashTool, then the bash script from here: http://forum.xda-developers.com/showpost.php?p=43530152&postcount=3253 with the v.31 rooting tool from the original post in that thread.
I had to edit the script in a very minor way, as was pointed out by its author, so it could find my adb command. I just placed the path to that command in the line that said:
Code:
for test_adb in "adb" "stuff/adb"
in the place of the first "adb", so I got:
Code:
for test_adb in "/home/user/android-sdk-linux/platform-tools/adb" "stuff/adb"
Make sure to replace "user" with your username, without the quotes.
Then I stuck the script in the same folder as the runme.bat file. After the script and root tool had done their work, my phone had rebooted a total of three times, and I had a perfectly functional Superuser app!
Huge thanks to LoveMyAndroid2010 in the post linked above. Great script - some love for linux!
Now to get RootKeeper and upgrade back to ZVK...
The aforementioned root method worked for me. Since I've rooted, I've compiled my findings into another thread. I haven't been able to unlock the bootloader yet, unfortunately.
how to upgrade LG Viper to Jelly bean or higher
After I root as per instructions, how can I upgrade the OS?
Please help. I'm a newbie and would appreciate any help you may offer. Haven't rooted any phone before.
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Once you select Option 1, you need to go back to the main windows to uncheck one box (F something) and then click start before it does the rooting. I missed it yesterday also and just keep waiting until I realized there was a step I didn't do.
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Delete the root toolkit, restart your computer and download it again. Same thing happened to me :thumbup:
Sent from my SCH-I545 using xda app-developers app
Help!
I am having the same problem and my phone is sitting there with a large android icon and message reading "Downloading.. Do not turn off target!!" I am afraid to disconnect the phone from the USB. What should I do?
ThugosaurusRex said:
Delete the root toolkit, restart your computer and download it again. Same thing happened to me :thumbup:
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Same here, Verizon Samsung g s4.
I followed the instructions: unchecked the F. reset box, and selected tar and clicked start. The "<OSM> All threads completed. (succeed 0 / failed 0) line showed up, and nothing else.
goldberg96 said:
Hi folks. I am not allowed to post in the developer forums since I am a new user so I figured I'd try here and hopefully some developer will be watching this forum.
I want to root my new Verizon Samsung Galaxy S4. I found the thread regarding the all in one tool for doing the root and installing recovery.
I followed the instructions, downloaded the tool, connected my phone, invoked the tool and selected Option 1 (Root my phone). The cursor skipped down one line and then nothing. I waited 15 minutes to make sure it wasn't doing anything but that's it, nothing.
I am new to Android and therefore new to Rooting so I thought this all in one tool would be perfect for me to get the job done. But I now have no idea why nothing happens when I invoke the tool and select Option 1.
Is there somebody in this forum who can help me please?
Thanks ............ Rob
Click to expand...
Click to collapse
Did you enable USB debugging and third-party? USB debugging can be found by tapping on build number (i think) under about phone like 7 times. Developer options should appear in your settings after that. Third-party sources is under security I believe. Hope that helps!
whichonespink73 said:
Did you enable USB debugging and third-party? USB debugging can be found by tapping on build number (i think) under about phone like 7 times. Developer options should appear in your settings after that. Third-party sources is under security I believe. Hope that helps!
Click to expand...
Click to collapse
I don't mean to hijack any responses here, but seeing as I have the same problem as OP I think it's safe to say that he also enabled USB debugging and third-party sources. Nothing
dabs delicious said:
I don't mean to hijack any responses here, but seeing as I have the same problem as OP I think it's safe to say that he also enabled USB debugging and third-party sources. Nothing
Click to expand...
Click to collapse
I actually found my problem. Even though I had the usb debugging flag set, when I tried to root, a popup window came up in the background asking me to confirm that I wanted to enable usb debugging. Because it was in the background I kept missing it. Once I saw it and replied, everything worked perfectly. Hope this maybe helps someone.
goldberg96 said:
I actually found my problem. Even though I had the usb debugging flag set, when I tried to root, a popup window came up in the background asking me to confirm that I wanted to enable usb debugging. Because it was in the background I kept missing it. Once I saw it and replied, everything worked perfectly. Hope this maybe helps someone.
Click to expand...
Click to collapse
You're talking about the popup window on your phone, right? Because It pops up for me too, and I click "confirm" each time, but to no avail
Does anyone else have any suggestions?
Question about using the 3 in 1 tool
I am wondering a few things. I have the Samsung Galaxy 4 that has not been activated by Verizon yet. I want to use it on Straight Talk which uses GSM. After running this tool with the unlocking and rooting, will I be able to do this?
Super Noob
Hello everyone this is my very first post, I am looking to root my verizon s4 using the one tool kit i dont believe i will have any trouble doing so i have rooted a few phones in my past before, my only question is about unrooting. i didnt want to start a whole new thread for this so figured i would ask here. is the VRUAMDK Factory Image (modified with No-Wipe) that you download from http://forum.xda-developers.com/showthread.php?t=2301259 is that the stock verizon firmware the only thing holding me back from rooting is not being sure that i have the stock firmware to flash, i might mess up and wanna make sure i have that for any situation that might come up. would someone plz confirm that that is the file i want to return to no root stock
missjamie said:
I am wondering a few things. I have the Samsung Galaxy 4 that has not been activated by Verizon yet. I want to use it on Straight Talk which uses GSM. After running this tool with the unlocking and rooting, will I be able to do this?
Click to expand...
Click to collapse
Root just allows you to hack the software on your phone, and the "unlock" refers to the bootloader. It does not unlock the phone for other carriers; this is done (from what I understand) by dialing a specific set of codes, generally provided to you by the original carrier of the phone if you have an account in good standing with them and you tell them you plan on travelling out of the country and need to use GSM. I have never needed to do this and as such only have a minor theoretical knowledge of the subject; I would appreciate it if somebody with more knowledge on this would confirm or deny my suspicion that you are better off trading the phone for an AT&T/T-Mobile one that actually was meant for GSM, or otherwise obtaining one.
JNava420 said:
Hello everyone this is my very first post, I am looking to root my Verizon s4 using the one tool kit i don't believe i will have any trouble doing so i have rooted a few phones in my past before, my only question is about unrooting. I didn't want to start a whole new thread for this so figured i would ask here. is the VRUAMDK Factory Image (modified with No-Wipe) that you download from http://forum.xda-developers.com/showthread.php?t=2301259 is that the stock Verizon firmware the only thing holding me back from rooting is not being sure that i have the stock firmware to flash, i might mess up and wanna make sure i have that for any situation that might come up. would someone plz confirm that that is the file i want to return to no root stock
Click to expand...
Click to collapse
This is the original bootloader; not the stock firmware. You need to flash this after you successfully root, start the phone, start SuperSU, and update the SU binary.
The full stock firmware is rather large and available here:
http://forum.xda-developers.com/showthread.php?t=2289325
might not know as much as i thought
thanks for telling me this first of all, so let me see if i get this right and im hoping you or someone will tell me if im correct or not. The all in one root method does that take care of the whole SuperSu, and update part or do i still need to do that after the root tool does its business? With unrooting do i just need to flash the stock firmware in odin use triangle away and i should be good correct, im not quite understanding the whole thats the original bootloader....the file that downloads is a .tar i thought that was firmware/rom....what do i need the original bootloarder for exactly? I honestly am to the point id be willing to pay someone who has a credible rep to video chat and walk me through it all
If you need assistance. Pm me. If I sm available ill help you.
JNava420 said:
thanks for telling me this first of all, so let me see if i get this right and im hoping you or someone will tell me if im correct or not. The all in one root method does that take care of the whole SuperSu, and update part or do i still need to do that after the root tool does its business? With unrooting do i just need to flash the stock firmware in odin use triangle away and i should be good correct, im not quite understanding the whole thats the original bootloader....the file that downloads is a .tar i thought that was firmware/rom....what do i need the original bootloarder for exactly? I honestly am to the point id be willing to pay someone who has a credible rep to video chat and walk me through it all
Click to expand...
Click to collapse
The original bootloader is locked and doesn't allow for us to use the exploit to install SuperSU and root the phone.
We are installing the unlocked bootloader via Odin...
Then running motochopper to exploit a vulnerability to gain root...
Then MANUALLY (this can't happen automagically) opening SuperSU and updating the SU binary...
Then rebooting the phone to make sure you still have root (personal preference)...
Then re-loading the original bootloader (we don't need the modified one anymore!) via Odin...
Then we are done!
The steps in the how to are very precise and accurate. If you would like to PM me, I am available for another hour or so.
OverkillSD said:
The original bootloader is locked and doesn't allow for us to use the exploit to install SuperSU and root the phone.
We are installing the unlocked bootloader via Odin...
Then running motochopper to exploit a vulnerability to gain root...
Then MANUALLY (this can't happen automagically) opening SuperSU and updating the SU binary...
Then rebooting the phone to make sure you still have root (personal preference)...
Then re-loading the original bootloader (we don't need the modified one anymore!) via Odin...
Then we are done!
The steps in the how to are very precise and accurate. If you would like to PM me, I am available for another hour or so.
Click to expand...
Click to collapse
Well said. Only correction is the bootloader still remains locked. The recoveries included are loki patched. This bypasses the bootloader. All roms and kernels are loki patched so flashing them is safe. This is as close as we're gonna get to an unlocked bootloader for now.
Ah. I was under the impression the bootloader was unlocked. Thanks for the info.
I'm getting an error in Odin: "Cannot open serial port." I have debugger mode enabled and whatnot, any help?
dabs delicious said:
I'm getting an error in Odin: "Cannot open serial port." I have debugger mode enabled and whatnot, any help?
Click to expand...
Click to collapse
I am also coming up with this error. My computer says that device is not responding. I am a first time "rooter" but I read the instructions carefully and now im stuck.....any suggestions?
chrisxstyle1182 said:
I am also coming up with this error. My computer says that device is not responding. I am a first time "rooter" but I read the instructions carefully and now im stuck.....any suggestions?
Click to expand...
Click to collapse
Could be a couple of things first make sure your using the cable that came with your phone. Try switching usb ports. Alsi try rebooting your pc
I have read for hours and done everything suggested.
I got my friends Note 2 Stock.
I tried casual and get the error libUsb over and over
All my security measures are turned off.
Samsung drivers installed(went thru the whole uninstall ,reinstall etc)
Java updated
Win 7
3 different cables 2 different USB ports
I am rooted with Route 66
Weird part is I am on 4.1.1 and VRAMC3
Is there another way to just UNlock other than Casual?
I am adding another question and would appreciate any response as I can't seem to find the answer.
Is there another method to unlock bootloader?I am rooted.
I only ask because although I am happy with being rooted ,I want to try out a newer version of Android.I am on 4.1.
Is there a Root 66 with 4.3?
bump
edited og post with another question.Apologies for being a pest.
duenay said:
I have read for hours and done everything suggested.
I got my friends Note 2 Stock.
I tried casual and get the error libUsb over and over
All my security measures are turned off.
Samsung drivers installed(went thru the whole uninstall ,reinstall etc)
Java updated
Win 7
3 different cables 2 different USB ports
I am rooted with Route 66
Weird part is I am on 4.1.1 and VRAMC3
Is there another way to just UNlock other than Casual?
I am adding another question and would appreciate any response as I can't seem to find the answer.
Is there another method to unlock bootloader?I am rooted.
I only ask because although I am happy with being rooted ,I want to try out a newer version of Android.I am on 4.1.
Is there a Root 66 with 4.3?
Click to expand...
Click to collapse
I don't think there is a fully functional 4.3 TW rom out there yet. I wouldn't flash it. Unlock the bootloader with casual, if you can't, use a different computer to do it.
thank you for responding.I tried Casual on a different pc and got pass the Libusb error but ran into a "handshake" error.Will research the new error.I wish there was another way to unlock.It's weird that casual doesn't like my pc for the Note 2 but worked great for my S3.
duenay said:
thank you for responding.I tried Casual on a different pc and got pass the Libusb error but ran into a "handshake" error.Will research the new error.I wish there was another way to unlock.It's weird that casual doesn't like my pc for the Note 2 but worked great for my S3.
Click to expand...
Click to collapse
Casual doesnt like either of my computers with my Note 2. Im kind of a nube. But cant get past the libUsb hing either.
From what I'm reading it sounds like you're already unlocked. If you're rooted usually you would've unlocked first. How do you know you're rooted?
Sent from my SCH-I605 using Tapatalk
Hälftebyte said:
From what I'm reading it sounds like you're already unlocked. If you're rooted usually you would've unlocked first. How do you know you're rooted?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
I used Root66 and in my LIMITED understanding,it only roots and does not unlock.I am able to remove programs and run all my rooted apps like TIBU and Super SU pops up etc.I am just not able to install roms etc
duenay said:
I used Root66 and in my LIMITED understanding,it only roots and does not unlock.I am able to remove programs and run all my rooted apps like TIBU and Super SU pops up etc.I am just not able to install roms etc
Click to expand...
Click to collapse
Okay, so you're not unlocked then.
I see all your posts but I'm going to ask the basic questions anyway.
The first pc is obviously having issues with drivers. Seems like the second is good to go.
Do you have USB debugging enabled in Developer mode?
When you click Do it in Casual does your phone automatically reboot into Download mode?
Yes it does boot into d/l and I did have usb debug checked.I have the hand shake error but was able to get past the usb driver d/l
duenay said:
Yes it does boot into d/l and I did have usb debug checked.I have the hand shake error but was able to get past the usb driver d/l
Click to expand...
Click to collapse
Okay well here's my suggestion. Use Odin to flash KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar so you will be completely stock 4.1.2 with VRAMC3.
Then do the unlocking process with Casual R515b found here http://forum.xda-developers.com/showthread.php?t=2272066
Don't use the nightlies...the nightlies have given me problems.
You said you were on 4.1.1 with VRAMC3... that might be the issue you're having.
If you do this I don't see why you won't be able to unlock.
Thanks for all your help.My wife is finally dumping her Iphone and likes my N2 the way it is so I'm moving on to the N3.I sincerely appreciate all your replies.
A while back when I first got my Verizon Note 2, I used Adam Outler's Casual method to root my phone to Stock. I don't mind stock and root mostly for the Tethering.
About a week back the OTA notice hit my phone. I have declined the notice/update twice giving myself time to look for the root update. I found this thread by Beans: http://forum.xda-developers.com/showthread.php?t=2518704 ........ It seems right but this thread by AdamOutler says not to use ODIN: http://forum.xda-developers.com/showthread.php?t=2045563
So I am a little confused. I just want the update but don't want to mess up and not have my tethering ever again.... or brick the phone.
As a newbie, it's a scary task. Someone please help point me in the right direction. I just want the 4.3 Stock. If there is a thread for my situation I couldn't find it. I search "casual TWRP 4.3 OTA" and other similar variations.
I can still get to the TWRP 2.5.0.0. I have also downloaded the ODIN and started it... looks simple, but there are no instructions.
Someone please help me...
Thanks
MrNewbie said:
A while back when I first got my Verizon Note 2, I used Adam Outler's Casual method to root my phone to Stock. I don't mind stock and root mostly for the Tethering.
About a week back the OTA notice hit my phone. I have declined the notice/update twice giving myself time to look for the root update. I found this thread by Beans: http://forum.xda-developers.com/showthread.php?t=2518704 ........ It seems right but this thread by AdamOutler says not to use ODIN: http://forum.xda-developers.com/showthread.php?t=2045563
So I am a little confused. I just want the update but don't want to mess up and not have my tethering ever again.... or brick the phone.
As a newbie, it's a scary task. Someone please help point me in the right direction. I just want the 4.3 Stock. If there is a thread for my situation I couldn't find it. I search "casual TWRP 4.3 OTA" and other similar variations.
I can still get to the TWRP 2.5.0.0. I have also downloaded the ODIN and started it... looks simple, but there are no instructions.
Someone please help me...
Thanks
Click to expand...
Click to collapse
Welp, couple things...
#1 - The link you posted above is the from the Note 3. You want this one http://forum.xda-developers.com/showthread.php?t=2578458
#2, The ROM gets flashed via CWM or TRWP like normal, it's only the radio update that gets flashed via ODIN. That shouldn't affect your current unlock/root status.
#3 - If it is only ROOT you are after, the 4.3 OTA is Rootable, just not unlockable. So if by chance you accidentally take the OTA you should still be able to ROOT and install your Tethering app. You just won't be able to unlock the bootloader and install a custom recovery/rom.
Jiggabitties said:
Welp, couple things...
#3 - If it is only ROOT you are after, the 4.3 OTA is Rootable, just not unlockable. So if by chance you accidentally take the OTA you should still be able to ROOT and install your Tethering app. You just won't be able to unlock the bootloader and install a custom recovery/rom.
Click to expand...
Click to collapse
So if you are OTA'd to MJ9, how do you unlock?
SteveHebe said:
So if you are OTA'd to MJ9, how do you unlock?
Click to expand...
Click to collapse
You cannot. Best bet is to not take the other and unlock your bootloader. If you take it you will probably be locked for a very long time.
Sent from my SCH-I605 using Tapatalk 2
michigan66 said:
You cannot. Best bet is to not take the other and unlock your bootloader. If you take it you will probably be locked for a very long time.
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
SteveHebe said:
So if you are OTA'd to MJ9, how do you unlock?
Click to expand...
Click to collapse
Correct, you cannot currently UNLOCK the OTA MJ9 boot loader. But you can ROOT. Which will allow you to tether.
Sent from my SCH-I605 using xda app-developers app
MrNewbie said:
A while back when I first got my Verizon Note 2, I used Adam Outler's Casual method to root my phone to Stock. I don't mind stock and root mostly for the Tethering.
About a week back the OTA notice hit my phone. I have declined the notice/update twice giving myself time to look for the root update. I found this thread by Beans: http://forum.xda-developers.com/showthread.php?t=2518704 ........ It seems right but this thread by AdamOutler says not to use ODIN: http://forum.xda-developers.com/showthread.php?t=2045563
So I am a little confused. I just want the update but don't want to mess up and not have my tethering ever again.... or brick the phone.
As a newbie, it's a scary task. Someone please help point me in the right direction. I just want the 4.3 Stock. If there is a thread for my situation I couldn't find it. I search "casual TWRP 4.3 OTA" and other similar variations.
I can still get to the TWRP 2.5.0.0. I have also downloaded the ODIN and started it... looks simple, but there are no instructions.
Someone please help me...
Thanks
Click to expand...
Click to collapse
I would think long and hard about taking the OTA...although root is available, you may want an unlocked bootloader at some point, and there is no guarantee that is coming to the official 4.3. My guess is that it will not simply because this phone is 18 months old and the skilled developers that put in the time to do things like unlock bootloaders move on to newer devices.
If you managed to use Casual in the past, Odin won't be a problem for you. Below are the steps:
Odin takes about 5 minutes total...its really easy.
Download Odin (it's just a simple windows program). - http://forum.xda-developers.com/atta...3&d=1304094576
Make sure you have the latest samsung drivers - http://www.mediafire.com/?hzlnda0l5t8qyes
Download and extract the firmware from the first post in this thread - http://forum.xda-developers.com/showthread.php?t=2578458
Save whatever 4.3 ROM you choose to your external SD card.
Power down the phone and boot back into download mode (volume down, power and home at the same time).
Open Odin, plug in phone...Odin should recognize the phone and you will see the com port noted in yellow.
Check the PDA box and put the firmware file (unzipped) in the PDA slot. Click start and 30 seconds later you are done. Phone will reboot into recovery at this point.
Then you can flash any of the 4.3 ROMs (including stock) in TWRP (I use 2.5.0.0 too). I have tried them all and Sophisticated 3.0 has worked the best for me...I will be trying beans 23 as soon as it is done.
tfly212 said:
I would think long and hard about taking the OTA...although root is available, you may want an unlocked bootloader at some point, and there is no guarantee that is coming to the official 4.3. My guess is that it will not simply because this phone is 18 months old and the skilled developers that put in the time to do things like unlock bootloaders move on to newer devices.
If you managed to use Casual in the past, Odin won't be a problem for you. Below are the steps:
Odin takes about 5 minutes total...its really easy.
Download Odin (it's just a simple windows program). - http://forum.xda-developers.com/atta...3&d=1304094576
Make sure you have the latest samsung drivers - http://www.mediafire.com/?hzlnda0l5t8qyes
Download and extract the firmware from the first post in this thread - http://forum.xda-developers.com/showthread.php?t=2578458
Save whatever 4.3 ROM you choose to your external SD card.
Power down the phone and boot back into download mode (volume down, power and home at the same time).
Open Odin, plug in phone...Odin should recognize the phone and you will see the com port noted in yellow.
Check the PDA box and put the firmware file (unzipped) in the PDA slot. Click start and 30 seconds later you are done. Phone will reboot into recovery at this point.
Then you can flash any of the 4.3 ROMs (including stock) in TWRP (I use 2.5.0.0 too). I have tried them all and Sophisticated 3.0 has worked the best for me...I will be trying beans 23 as soon as it is done.
Click to expand...
Click to collapse
Thank you so much. Updated and everything seem to work just fine, but after some use it started rebooting. I am going to put on Sophisticated as you suggested. Hopefully, it will be more stable then the stock ROM.
And I can't get the WIFI Tethering to work. Which Tethering app are you using? I have unlimited data... and need to make sure Verizon isn't charging me for no reason.
MrNewbie said:
Thank you so much. Updated and everything seem to work just fine, but after some use it started rebooting. I am going to put on Sophisticated as you suggested. Hopefully, it will be more stable then the stock ROM.
And I can't get the WIFI Tethering to work. Which Tethering app are you using? I have unlimited data... and need to make sure Verizon isn't charging me for no reason.
Click to expand...
Click to collapse
I had some reboots on the stock rom too...but once I went to the other roms (I tried Nephilium, Sophisticated and N3bula, but had the best results with Sophisticated) and I haven't had one reboot.
As for the wifi tethering, on stock you need to flash the file below (some of the newer roms, including Sophisticated have it baked in).
http://forum.xda-developers.com/showpost.php?p=48315091&postcount=245
IS anybody getting close to an unlock/root post VRUEMJ9 VZWi605 Note 2.
the reason I ask is I unrooted back to stock 4.1.1 and then picked up the VZW OTA 4.3 and now can't use Casual or any other method, I can root but not unlock bootloader. well anybody have any Ideas? thank you.
david515 said:
the reason I ask is I unrooted back to stock 4.1.1 and then picked up the VZW OTA 4.3 and now can't use Casual or any other method, I can root but not unlock bootloader. well anybody have any Ideas? thank you.
Click to expand...
Click to collapse
The reason you ask what? You didn't ask anything. And as it's been stated a million times, no unlock method avaliable and unlikely there will be one.
Sent from my SCH-I605 using xda app-developers app
akellar said:
The reason you ask what? You didn't ask anything. And as it's been stated a million times, no unlock method avaliable and unlikely there will be one.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Eh, he is one of those that puts the question in his title instead of the body of the reply. But as @akellar said, there is nothing available.
Thanks so much for all the help. I got everything working right based on the instructions from this thread. I initially had an issue with the "Wifi Tether" because I was using a 3rd party app. Instead the correct app is the "Mobile Hotspot" app. It might be named differently for other carriers, but for Verizon it is "Mobile Hotspot".
Again thank you for all the replies.
Thank you for Sophisticated v3.
Thank you Adam Outler for the original Casual root.
And Thank you runandhide05 for the "Mobile Hotspot" hack!
:good::fingers-crossed: LOL
So I have the ZTE Midnight (Z768G) and I am getting the classic "low on space" message and I know what rooting is as I rooted my Nook Tablet 4GB but I can't seem to find a root that will work for my phone so that I can set my default storage to the SD card and I was wondering if someone could help me. Or if there's alternatives to rooting it that would also be nice. I installed an app that can erase cache but it's not doing much for me right now. I can't even update my apps. Any help would be nice!!
-Luciano
Root ZTE Midnight using kingo root - works!
lucianodiaz5 said:
So I have the ZTE Midnight (Z768G) and I am getting the classic "low on space" message and I know what rooting is as I rooted my Nook Tablet 4GB but I can't seem to find a root that will work for my phone so that I can set my default storage to the SD card and I was wondering if someone could help me. Or if there's alternatives to rooting it that would also be nice. I installed an app that can erase cache but it's not doing much for me right now. I can't even update my apps. Any help would be nice!!
-Luciano
Click to expand...
Click to collapse
went to kingoapp.com and downloaded and ran the app against my ZTE Midnight from Net10 - I now have root access. I did not buy the phone to make calls - the $20 price tag for an Android test platform was too goo to pass up.
covergeek said:
went to kingoapp.com and downloaded and ran the app against my ZTE Midnight from Net10 - I now have root access. I did not buy the phone to make calls - the $20 price tag for an Android test platform was too goo to pass up.
Click to expand...
Click to collapse
It worked but now I can't move the apps over to the SD card like I wanted to. I tried doing the /System app mover method of turning system apps to normal apps and uninstalling but it's still giving me that message.
Find the posts dealing with zte and link2sd. I am able to now install anything without space worries
Sent from my Z768G using xda app-developers app
Question:
After Rooting, can anyone install CWM & Install Custom ROM?
I'm looking to Root, Install CWM, then Install Custom ROM for Android v4.0 or higher.
Anyone successfully Rooted & Updated to Android v4.0 or higher.
Please advise. Thank you!
*** UPDATE: Kingo Android ROOT = ROOTED my (NET10) ZTE Z768G ***
*** LOOKING: Custom Recovery & Custom ROM (Android v4.0 or higher) **** Anyone ???
dtkool said:
Question:
After Rooting, can anyone install CWM & Install Custom ROM?
I'm looking to Root, Install CWM, then Install Custom ROM for Android v4.0 or higher.
Anyone successfully Rooted & Updated to Android v4.0 or higher.
Please advise. Thank you!
*** UPDATE: Kingo Android ROOT = ROOTED my (NET10) ZTE Z768G ***
*** LOOKING: Custom Recovery & Custom ROM (Android v4.0 or higher) **** Anyone ???
Click to expand...
Click to collapse
What drivers did you use to get Kingo Android Root to work? Nothing seems to be working for me...
ZTE Midnight!!!! No luck
I am having no luck with root.... tried all
How?
covergeek said:
went to kingoapp.com and downloaded and ran the app against my ZTE Midnight from Net10 - I now have root access. I did not buy the phone to make calls - the $20 price tag for an Android test platform was too goo to pass up.
Click to expand...
Click to collapse
How did you get kingoroot to run? I get stuck at "Installing Drivers" forever. I've tried installing my own drivers, both the included ones from the phone's internal memory as well as the latest ones from ZTE, and the ZTE ones that kingoroot points me to in the troubleshooting section. I'm running Win8 and I've also tried disabling Signed Driver Verification. What is the magic spell to get this thing to run? I agree $20 is *****in if I can just get the thing rooted so I can install more than 1 app and *cough* turn on tethering
jawa6988 said:
How did you get kingoroot to run? I get stuck at "Installing Drivers" forever. I've tried installing my own drivers, both the included ones from the phone's internal memory as well as the latest ones from ZTE, and the ZTE ones that kingoroot points me to in the troubleshooting section. I'm running Win8 and I've also tried disabling Signed Driver Verification. What is the magic spell to get this thing to run? I agree $20 is *****in if I can just get the thing rooted so I can install more than 1 app and *cough* turn on tethering
Click to expand...
Click to collapse
Haha that's the point right xD $20 hot spot! But I agree. Nothing seems to be working ATM... Too much bloatware and need to get started on a CM nightly...
Right
wireproof said:
Haha that's the point right xD $20 hot spot! But I agree. Nothing seems to be working ATM... Too much bloatware and need to get started on a CM nightly...
Click to expand...
Click to collapse
Seriously, I left it sitting all night to see if it would ever start to download. The help section says that it's stalling on Driver Verification and to disablle it, but it makes no difference. I have trouble believing that's the problem since it won't even download the driver, how can it even try to "verify" it. Besides that fact that I have the latest driver from the manufacturer and have tried the one from the link in their help pages to the ZTE driver. Is there no command line option to skip the driver installation and just see if it will run? I know i can access it by adb. OR does anyone know of a method to root this thing manually? I'm not skeered to use terminal and dox boxes, but I'd rather not do it blind. THis phone is nearly useless to me without root especialy since i just figured out why I get no signal... It's a damn T-Mobile based device. It's doesn't say this ANYWHERE on the box or documentation. I should have researched it first as I usually do, but I got too excited by the idea of a droid for $20. I thought, at least if it doesn't work, it will be a toy for my 5 year old... But even he will want to install more than 1 teeny app LOL
With a custom 4.2 or later rom and good signal this thing would be.... OK... not great, but not too bad either. It isn't all that slow as I was afraid. Kit Kat might be great on it
Will a root method from any other ZTE devices work for the Midnight? I read that it might possible be the same as the ZTE Concord from t-mobile, but I tried a root method for it using a jcase update.zip, but it did not work. I'm at a loss. I've never had this much trouble getting one rooted. Apparently this device just wasn't popular enough
jawa6988 said:
Seriously, I left it sitting all night to see if it would ever start to download. The help section says that it's stalling on Driver Verification and to disablle it, but it makes no difference. I have trouble believing that's the problem since it won't even download the driver, how can it even try to "verify" it. Besides that fact that I have the latest driver from the manufacturer and have tried the one from the link in their help pages to the ZTE driver. Is there no command line option to skip the driver installation and just see if it will run? I know i can access it by adb. OR does anyone know of a method to root this thing manually? I'm not skeered to use terminal and dox boxes, but I'd rather not do it blind. THis phone is nearly useless to me without root especialy since i just figured out why I get no signal... It's a damn T-Mobile based device. It's doesn't say this ANYWHERE on the box or documentation. I should have researched it first as I usually do, but I got too excited by the idea of a droid for $20. I thought, at least if it doesn't work, it will be a toy for my 5 year old... But even he will want to install more than 1 teeny app LOL
With a custom 4.2 or later rom and good signal this thing would be.... OK... not great, but not too bad either. It isn't all that slow as I was afraid. Kit Kat might be great on it
Will a root method from any other ZTE devices work for the Midnight? I read that it might possible be the same as the ZTE Concord from t-mobile, but I tried a root method for it using a jcase update.zip, but it did not work. I'm at a loss. I've never had this much trouble getting one rooted. Apparently this device just wasn't popular enough
Click to expand...
Click to collapse
I tried the root method for the T-Mobile branded version of the phone... I have the NET10 GSM version.. Nothing seems to be working either. Not even Gingerbreak... This is a freaking NET10 phone... And Kit Kat would be nice on this phone! 800 mhz processor and 512MB RAM so it should work well.
I just bought this phone too. It comes with CM 2.3.7 installed on it. I"m wanting a KitKat ROM. I'm hoping my by Wambo_Bomb will compile a version of his BlakAndroid for the ZTE Midnight. I've asked him to do so. He said he needs the modules an Kernel info to do it. If he does come through for me, I will share with everyone.
ROOTED!!!
I just wanted to come back and let you guys know: After A few days and much frustration, I tried Kingoapp.com again and it worked flawlessly on the first try, so now I'm rooted and able to run root apps on my rooted stock rom. Now does anyone know of a way to get a custom recovery on this phone? And if there are any cutom roms available yet? If your friend does compile a rom, I'd be happy to help with testing.
---------- Post added at 10:34 AM ---------- Previous post was at 10:29 AM ----------
Sleepycloud said:
I just bought this phone too. It comes with CM 2.3.7 installed on it. I"m wanting a KitKat ROM. I'm hoping my by Wambo_Bomb will compile a version of his BlakAndroid for the ZTE Midnight. I've asked him to do so. He said he needs the modules an Kernel info to do it. If he does come through for me, I will share with everyone.
Click to expand...
Click to collapse
Mine is now rooted, so let me know if you need me to dig out any files and send them to you. I can't make a full nandroid yet, but I can get in there with FTP or adb and hopefully get anything you need
---------- Post added at 10:51 AM ---------- Previous post was at 10:34 AM ----------
wireproof said:
What drivers did you use to get Kingo Android Root to work? Nothing seems to be working for me...
Click to expand...
Click to collapse
Try Kingoapp again. The server issue appears to be fixed. I did try from a fresh clean install of Win8, but I had tried that before and it stalled at installing drivers, so maybe had nothing to do with it. I simply connected the phone, installed drivers from internal memory (appeared as "CD-ROM in Win8), enabled development mode, then ran Kingoapp and it worked flawlessly. Good luck. The more people we get rooted, the better the custom ROMS will become I hope
GOT ROOT!!! cool thanks. now what... no roms yet?
sorry to steal the thread but does anyone know how to unlock sim for tmobile.
I was able to root the zte midnight using kingo root. So now Im looking for cwm and a custom rom for this phone. Does anyone know if any are out for this phone?
ultravioletnanokitty started a developers thread but i cant post on there to motivate them...
http://forum.xda-developers.com/showthread.php?t=2715570
I need a custom recovery for this phone, i will donate 50 USD if somebody help me to convert z768g to v768. So i could be able to Unlock it. Please help.
zte miniget10 phones root
ok I was having same problems do this plug device to pc go to thispc or my computer click on your phone and it will install right drivers and use kingo and your done figured th out 20mins into trying to root I bought this device just todo this to fiue out for have a nice day
---------- Post added at 10:01 PM ---------- Previous post was at 09:44 PM ----------
datboirobbie said:
ok I was having same problems do this plug device to pc go to thispc or my computer click on your phone and it will install right drivers and use kingo and your done figured th out 20mins into trying to root I bought this device just todo this to fiue out for have a nice day
Click to expand...
Click to collapse
sorry misspelled it zte midnight
ZTE midnight root???
has anyone ever found a root for zte z828tl??
What version of kingo?