Hi guys. I'm running latest Tshiba firmware.
I used SuperOneClick with no success. I tried on 2 computers, but application freezes and do nothing...
Any other suggestion?
I root it with SuperOneClick? Try second modw for rooting that is avible in app.
Jon2555 said:
I root it with SuperOneClick? Try second modw for rooting that is avible in app.
Click to expand...
Click to collapse
Sorry, what's the app?
Have you enabled "usb debugging" on tablet before starting SuperOneClick on your PC?
usually this is "root" of the problem
sader0 said:
Have you enabled "usb debugging" on tablet before starting SuperOneClick on your PC?
usually this is "root" of the problem
Click to expand...
Click to collapse
Hi, i know my problem now. I can't get Folio 100 recognised by Windows 7.
Always is recognised as "Toshiba Mass Storage" or "H:\".
I tried already on two differents computers (two with Windows 7), one Windows is clean install i can't install ADB driver.
I downloaded Android SDK r11 from here
I installed Java Development Kit since Android SDK won't run without it.
I run Android Manager, install only platform-tools for adb
I install Google USB and add lines for Nvidia Tegra 2
I do cmd echo
Restart
I put Toshiba Folio in Debug Mode, plug-in...
Windows install Mass Storage driver only...
Turn off Debug Mode and turn on... Device goes to Mass Storage Mode...
Windows won't do anything with modified usb driver inf
Windows eventually installs a device as "H:\"
Nothing more.
Please help, thanks in advance.
Hi again.
Also, i can install ADB, Android SDK and SuperOneClick on Mac... But i don't know if i can tweak usb driver for doing root here.
SOLVED WITH FASTBOOT
Thanks to all!!!
Hi, I am looking for usb driver for viewpad 7 for using adb. Can anybody provide and link or pointers from where can I get the same.
Thanks,
Dang
There's no "real" driver...
Just connect your Viewpad 7 to your PC.
A window pops up where you can select "setup.exe" - select it.
Then a few drivers get installed (perhaps a restart is necessary)
Seems like the Viewpad 7 has a virtual drive which gets mounted when connecting it to a PC - it's shown up as virtual CD-drive for me under Windows XP and Windows 7.
PS: The drivers are also located on the virtual CD-drive in a directory.
Make sure you run the file from the virtual optical drive if you have autorun disabled.
Sent from my HTC Sensation Z710e using XDA App
plug youre viewpad in now youre pc see een cdrom right click and open use that adb.exe that one works
How to remove the virtual drive
I have already installed the drivers from this drive, but whenever I connect the device, the virtual CD-ROM drive still appears. Anyone know how to get rid of it?
LEGEND383 said:
I have already installed the drivers from this drive, but whenever I connect the device, the virtual CD-ROM drive still appears. Anyone know how to get rid of it?
Click to expand...
Click to collapse
I always open the Sync tool then (do nothing, no sync or so).
That's the only way my Windows 7 PC recognizes the tablet via ADB.
I have been doing that as well, but it's just annoying to have this extra drive that is of no use and just sits there taking up a drive letter.
Stupid question, ive never used adb, but does this mean i dont have to download it because already cames on that virtual drive, and so i only need to install it ?
Now i manage to install the drivers.
I go to the command line in windows and write :
adb usb
adb devices, and get this:
List of devices attached
FM6120420141
Then i do,
adb shell, and nothing happens.
Ive tried several commands and nothing works, what m i doing wrong here ?
Hi guys, i tried another pc with windows xp and everything worked perfect at first try. Thans for the help VPAD7, nice chating.
Bye all the other losers.
Hi VPAD7
Can you share the solution for "adb devices" not working on windows7? I am facing he same problem with my Viewpad7.
Thanks for your contribution to the forum.
---------- Post added at 12:45 AM ---------- Previous post was at 12:39 AM ----------
VPAD7 said:
Now i manage to install the drivers.
Could you share how did you manage to get drivers installed on windows7? I am also seeing same issue with viewpad7. I am trying to root it.
Click to expand...
Click to collapse
Solved driver issue on windows7
Hi,
I was facing issue in connecting viewpad7 to windows7 machine. Even synchronization steps were failing. Manuall attempt to run "adb.exe devices" were unable to detect the device. Here is my steps that I did for rooting the device with SuperOnceClick(SOC)1.7-
1. Initially driver were not detected/installed on windows7. Only CDROM displaying setup was displayed and clicking "Setup.exe" is not installing drivers. Copy the All files on computer and say folder name is "v7Setup".
2. To Install drivers, Connect Tablet/Phone to windows7, select "USB Tethering in tablet" (This is needed to detect devices by Windows7), in windows7:check the "Device Manager", it can show "Others" two devices: HSUSB & RNDIS. Update the driver for both devices from "v7setup/RUT/*" folders.
3. Now start SOC1.7 and select "rageagainstthecage" and click root. It may wait at "Running rageagainstthecage..." message in SOC log window. Then disconnect the Tablet after waiting for 1-2 minute and connect again after beep sound from windows7. Here, again I needed to install the drivers as mentioned in step2. SOC1.7 will proceed and finally in poup message, it will ask to "push su" files. And Done.
Goodmornig everyone..!
I just bought an Archos 80 G9 Turbo 16GB and I cannot connect it with my computer that runs Windows 7 64bit
When I plug it, it is detected as an Unknown Device (error code 43) and nothing is mounted.. (but tablet is in "slow charge")
In an old Win XP computer is working good, this made me think it's not completely tablet's fault..
here what I've tried, deeply searching on internet:
-Downloaded ADB android Drivers (in Archos site, on internet, various sources), forced installation of them, problem come out: Drivers are not for a 64 bit Os
-Uninstalled Kies, LG Pc suite and rebooted after every change..nothing changed
-Unactivate and reactivate after reboot Windows Media Player 12..no change
-Changed Usb Mode in tablet from MTP to PTP.. nothing changed
-Installed a lot of USB apps in Google Play and tried changing values..no change
-Upgraded tablet from GingerBread to ICS, deeply wiped and restored several times, and in every configuration, I allways had same results..
-Changed USB cable, several of them tested..and guess?? Nothing..eheh
-Tried shouting at it, tried kissing and asking for his forgiveness..but nothing
I'm stuck on Stock! i cannot upgrade it with XDA custom, I can only connect to pc via FTP server....!
Any Clues?!?!
Thank You to all!
1. To root and to enable SDE menu you need only adb driver
2. You can transfer archos.ext4.update files using FTP from pc to tablet
3. Recovery for flashing firmware update or custom kernel creates ramdisk which is seen as standard usb storage device- "just works"
You need to give full access (Everybody) to the folder where Android SDK is installed in Program Files (x86) and through Android SDK Manager select the second item "Android SDK Platfrom-tools for download.
This worked for me on Windows 7 Ultimate.
Ooops overread something... forget it!!!
Have you checked for the correct MTP driver package...
Regards,
scholbert
gen_scheisskopf said:
1. To root and to enable SDE menu you need only adb driver
2. You can transfer archos.ext4.update files using FTP from pc to tablet
3. Recovery for flashing firmware update or custom kernel creates ramdisk which is seen as standard usb storage device- "just works"
Click to expand...
Click to collapse
Only is an huge word, I have tried several dof them, and no one is working, no one is accepted by windows (it tells me they are not designed for the device or they are not for an x64 OS)
Strange thing, it accepted me usb drivers for Samsung Mobile, it installed them.. but not ADB from android... obviously, Samsung ones where not working with it..
xcen3x said:
You need to give full access (Everybody) to the folder where Android SDK is installed in Program Files (x86) and through Android SDK Manager select the second item "Android SDK Platfrom-tools for download.
This worked for me on Windows 7 Ultimate.
Click to expand...
Click to collapse
Installed drivers and quite everything with Android SDK, but nothing changed, even forcing these drivers... tried with access tweek, but.. nothing..
scholbert said:
Ooops overread something... forget it!!!
Have you checked for the correct MTP driver package...
Regards,
scholbert
Click to expand...
Click to collapse
Dowloaded and istalled a few from windows... the problem is, if it would be an MTP problem, I should not have it in PTP mode... I suppose...
EDIT: tried disabling Integrity Checks for non signed drivers with these string in cmd:
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING ON
nothing changed
indyjones83 said:
Only is an huge word, I have tried several dof them, and no one is working, no one is accepted by windows (it tells me they are not designed for the device or they are not for an x64 OS)
Strange thing, it accepted me usb drivers for Samsung Mobile, it installed them.. but not ADB from android... obviously, Samsung ones where not working with it..
Installed drivers and quite everything with Android SDK, but nothing changed, even forcing these drivers... tried with access tweek, but.. nothing..
Click to expand...
Click to collapse
For Gen9 you need Archos modified driver
gen_scheisskopf said:
For Gen9 you need Archos modified driver
Click to expand...
Click to collapse
These are the first one I tried.. From their site.. Not working.. Thankyou!
I wrote them in Contact and support in that site, copying and pasting the same I wrote here, they answered me, two days later.. Excited in what solution they could give me,from the heights of their knowledge, I suddenly opened and the answers was:
Please write the email in English.
Are they kidding me? This makes me suppose they have not even tried in reading it.. Well.. 1000 thanks for you and you support..!
Sent from my Optimus 2X using XDA
Second reply from Archos, this time they read it, but only first few lines..
their reply is:
"We invite you to connect the device to a 32 bits system and then to check if the Archos is seen by the pc."
Already done, and it's working with that (WIN XP)
Did you try to install manually the MTP driver from the device manager of the PC ?
YES.
any new clue from here?
Thankyou!
Try this
Sent from my ARCHOS 80G9 using XDA
1 thing, when you are plugging into your PC, are you plugging it into the main hub (rear of PC), or a front port?
I had a devil of a job getting mine to recognise the driver, in the it turned out it really needs to be plugged into the rear port, it may have been a conflict on my PC, but worth a shot.
pittnuma said:
1 thing, when you are plugging into your PC, are you plugging it into the main hub (rear of PC), or a front port?
I had a devil of a job getting mine to recognise the driver, in the it turned out it really needs to be plugged into the rear port, it may have been a conflict on my PC, but worth a shot.
Click to expand...
Click to collapse
Yes, tried to connect it in every usb my laptop has, even tried in disconnecting every usb device and turned off the pc. After that I took off battery for a few minutes and started again.. no change... ERROR 43...!
In the old win xp pc I use front usb I installed 10 years ago, and works..!
ADB USB drivers from archos site are not recognized, it's not possible to manually select them.. I was able to select an old symbian driver I have in an old backup directory, but not that one... any clue?
indyjones83 said:
Yes, tried to connect it in every usb my laptop has, even tried in disconnecting every usb device and turned off the pc. After that I took off battery for a few minutes and started again.. no change... ERROR 43...!
In the old win xp pc I use front usb I installed 10 years ago, and works..!
ADB USB drivers from archos site are not recognized, it's not possible to manually select them.. I was able to select an old symbian driver I have in an old backup directory, but not that one... any clue?
Click to expand...
Click to collapse
Did you try the link in my previous post? I'm running win7 64 bit and it worked for me!
Maybe just try adding the file in your USERPROFILE directory first!
Sent from my HTC Sensation using XDA
bobjbain said:
Did you try the link in my previous post? I'm running win7 64 bit and it worked for me!
Maybe just try adding the file in your USERPROFILE directory first!
Sent from my HTC Sensation using XDA
Click to expand...
Click to collapse
Yes, that one and a modified one.. the problem is, it remains as an "Unknown Device" (error 43).
I tried now to move that driver you suggested me in USERPROFILE (c:\USERS\"myname" and c:\USERS\"myname"\.android) is this you mean?
and same error: can't find in directory any compatible driver for the device. make sure it's done for a x64 system...
It seams to me device is not recognized at all.. not PTP or MTP or USB DEBUG....
but it works with win xp...! I tried again..!
Another doubt I have is: when I plug it to the wall charger I found on the box, it goes on "Slow Charge".. is it normal? why not fast charge or Normal? may be an hint?
indyjones83 said:
Yes, that one and a modified one.. the problem is, it remains as an "Unknown Device" (error 43).
I tried now to move that driver you suggested me in USERPROFILE (c:\USERS\"myname" and c:\USERS\"myname"\.android) is this you mean?
and same error: can't find in directory any compatible driver for the device. make sure it's done for a x64 system...
It seams to me device is not recognized at all.. not PTP or MTP or USB DEBUG....
but it works with win xp...! I tried again..!
Another doubt I have is: when I plug it to the wall charger I found on the box, it goes on "Slow Charge".. is it normal? why not fast charge or Normal? may be an hint?
Click to expand...
Click to collapse
OK try this :-
Download the naked universal drivers attached to this post and unzip somwhere!! (got this from the Sensation forum, would say thanks but I can't remember who posted them).
Attache your G9 then go into device manager.
Now find your badly installed driver and uninstall it. Keep doing this until all drivers are uninstalled.
Now unplug and reattach G9, let windows do it's thing. You will still have a excalamation next to "Android Drivers" at this point.
Right click on the driver in device manager and "Update Driver Software", then click "Browse My Computer....", now click on "Let Me Pick from a list...", then click the "Have Disk" button. Browse to the folder where you extracted the Universal Naked Drivers and select the andorid_winxusb.inf file.
If you get unsigned warnings click on the "trust me" or whatever it says.
Driver should now be installed.
The adb_usb.ini file is really for if you use adb, if you do it need to go in c:\users\you\.android directory (create the directory if it doesn't exist).
You can test adb connectivity by using "adb devices" from the command line.
Hope this helps
indyjones83 said:
Another doubt I have is: when I plug it to the wall charger I found on the box, it goes on "Slow Charge".. is it normal? why not fast charge or Normal? may be an hint?
Click to expand...
Click to collapse
I think this is probably because your USB cable only has 2 internal cables, not 4.
IIRC, the outside 2 are USB and data chat and the inside 2 are for 5v power.
If your G9 detects the cable doesn't have the two middle connections then it will do a slow charge regardless.
Are you using the cable you got with the G9??
bobjbain said:
I think this is probably because your USB cable only has 2 internal cables, not 4.
IIRC, the outside 2 are USB and data chat and the inside 2 are for 5v power.
If your G9 detects the cable doesn't have the two middle connections then it will do a slow charge regardless.
Are you using the cable you got with the G9??
Click to expand...
Click to collapse
Yes, I'm using the cable i got with the g9.. I could have a dual cable (the one they give to you with an external hdd), but it's mini usb, not micro...
bobjbain said:
OK try this :-
Download the naked universal drivers attached to this post and unzip somwhere!! (got this from the Sensation forum, would say thanks but I can't remember who posted them).
Attache your G9 then go into device manager.
Now find your badly installed driver and uninstall it. Keep doing this until all drivers are uninstalled.
Click to expand...
Click to collapse
And this is the problem.. I don't have any driver to uninstall, as if my device is an "Unknown Device" no service, no adb no mpt recognized.. only an "unknown device".. even with new drivers, the only driver it lets me install are Samsung drivers.. but obiously doesn't work!
I now tried in installing it as this samsung, just to have something to uninstall...
bobjbain said:
Now unplug and reattach G9, let windows do it's thing. You will still have a excalamation next to "Android Drivers" at this point.
Right click on the driver in device manager and "Update Driver Software", then click "Browse My Computer....", now click on "Let Me Pick from a list...", then click the "Have Disk" button. Browse to the folder where you extracted the Universal Naked Drivers and select the andorid_winxusb.inf file.
If you get unsigned warnings click on the "trust me" or whatever it says.
Driver should now be installed.
The adb_usb.ini file is really for if you use adb, if you do it need to go in c:\users\you\.android directory (create the directory if it doesn't exist).
You can test adb connectivity by using "adb devices" from the command line.
Hope this helps
Click to expand...
Click to collapse
You are really amazing, archos is not caring at all..
Before I tried your firs suggestion in USERDEVICE and for a minute it found my device as Error 10 and not Error 43 (unknown device)... and that's the only moment my pc saw the tablet...
Thankyou!!
indyjones83 said:
Yes, tried to connect it in every usb my laptop has, even tried in disconnecting every usb device and turned off the pc. After that I took off battery for a few minutes and started again.. no change... ERROR 43...!
In the old win xp pc I use front usb I installed 10 years ago, and works..!
ADB USB drivers from archos site are not recognized, it's not possible to manually select them.. I was able to select an old symbian driver I have in an old backup directory, but not that one... any clue?
Click to expand...
Click to collapse
I too have run across this problem--AFTER woprking for 6 months with it under ADB just fine. Not just my work computer, home devices as well. Did you ever get this fixed?
hi,
i wanted to start android development on a real, but not too expensive device.
So i bought this one: http://www.amazon.de/WiPad-Multitou...=sr_1_2?s=ce-de&ie=UTF8&qid=1337256098&sr=1-2
The manufactorer is CUBE: http://www.cube-tablet.com/cube-k8g...8-1-2ghz-camera-8gb-capacitive-tablet-pc.html
It works fine and i wanted to connect it to my PC, running windows 7.
The problem is: I could not find any usb driver on the (chinese) manufactorer site.
In the device manager the device was listed as "K8GT_W" and marked with "no driver installed".
Can someone please tell me, if there is a driver for this device or how to use some "generic" usb device driver with this device?
I downloaded the google USB driver with the android SDK manager.
The i selected "update driver" from the device maanger + selected the google usb driver download directory.
This shows the message "K8GT_W could not be installed".
The manufacturers is CUBE:http://www.vaful.com/cube-k8gt-delu...roid-40-capacitive-touch-screen-p-100130.html
I also encountered the same problem!
me 2
did you solve the problem? and found any thing?
Im looking for a usb driver for a visture v97 hd, also a china tablet with the exact same issue you guys are having. anyone have a generic driver for us so we can charge our tablets via usb ?
Hi
I have tablet (non brand) when I connect it to the windows 7 pc the windows reported that it can not find the driver and it appears under the "other devices" with the device name "Android>
I did my homework and google abt the problem but the keywords are very confusing
any hope to find the the driver?
thanks
Hi,
You should try to find the model of your device and search for drivers on the internet.
Usually, when you connect you tablet to a Windows PC without usb debugging, you can access the contents of the SD card, just like you would with a USB stick.
But if you activated the debugging, you need the driver.
All the best.
croq said:
Hi,
You should try to find the model of your device and search for drivers on the internet.
Usually, when you connect you tablet to a Windows PC without usb debugging, you can access the contents of the SD card, just like you would with a USB stick.
But if you activated the debugging, you need the driver.
All the best.
Click to expand...
Click to collapse
Thanks For your kind reply
actually I want to connect it with debugging enabled
below some information from the device
Model number M711
Android version : 4.0.3
baseband version 0.7
kernel version 3.0.8
buildnumber 97F1-D2-H2-H01-W402.20120210
thanks
any hope good guys?