Hi XDA-Devs, i have here a german T-Mobile HTC Mozart and want to flash it with an newer Rom. I can connect the Phone with Zune on my Win7 PC, but the Windows Mobile Device Center can not find my Mozart.
I have download this Rom > http://forum.xda-developers.com/showthread.php?t=1359397 and extract it with 7zip to my desk.
Than ill tryed to boot the phone with Powerbutton+VolumeDown to the Bootloader Mode "Serial" than i connect the Phone via USB-Cable to PC, "Serial" switched to "USB". In the first Steps, the RomUpdateUtility don not display me information about the current image, in the next step i can click "Update", on the next page i also can not see information about the current version. After this i started the RomUpdateUtility, i see a ProcessBar on PC and Phone, but all the time on 0% of process , after a few minutes i become the following error: "Error 262 The Update Utility has encountered communication errors during the update process"
What is the problem?
Hi friend.. can you post here the info about your phone?? You can found in Settings->Information.
Example..
O.S Version:
Firmware:
Radio:
ecc.ecc.
And... Have you Mango??
OS: 7.0.7392.0
FirmWare: 2250.21.13301.111
HW: 0004
Bootloader: 1.33.2250.1(123643)
ChipSoc: 2.2.5.0
??
metatrixter said:
Hi XDA-Devs, i have here a german T-Mobile HTC Mozart and want to flash it with an newer Rom. I can connect the Phone with Zune on my Win7 PC, but the Windows Mobile Device Center can not find my Mozart.
I have download this Rom > http://forum.xda-developers.com/showthread.php?t=1359397 and extract it with 7zip to my desk.
Than ill tryed to boot the phone with Powerbutton+VolumeDown to the Bootloader Mode "Serial" than i connect the Phone via USB-Cable to PC, "Serial" switched to "USB". In the first Steps, the RomUpdateUtility don not display me information about the current image, in the next step i can click "Update", on the next page i also can not see information about the current version. After this i started the RomUpdateUtility, i see a ProcessBar on PC and Phone, but all the time on 0% of process , after a few minutes i become the following error: "Error 262 The Update Utility has encountered communication errors during the update process"
What is the problem?
Click to expand...
Click to collapse
is 1st time you try to install a Custom Rom?have you installed Rspl/Hspl ??
yeah first time, and whats Rspl/Hspl? Where i become this?
Always Read first some guides before you do anything ...
metatrixter said:
yeah first time, and whats Rspl/Hspl? Where i become this?
Click to expand...
Click to collapse
This is Usually things to do for Flash Custom Rom. For make your phone "flashable" with custom roms(no official roms) you need to install RSPL/HSPL.
1. If you have MANGO with SPL 4.xx or 5.xx in your device, flash a NODO Rom first to downgrade SPL otherwise you´ll brick it.
2. You must have RSPL/HSPL installed in your device , download RSPL/HSPL see this thread HERE.
3. Before doing any operations be sure you have battery level more than 50%!
4. Now flash Custom Rom you download and extract before.
Warranty Issues
Be warned, using RSPL may void your warranty.
If you need to send your device to a Repair Centre, make sure that it looks like stock! Install stock official ROM before go to Repair Centre.
And Please.. Read Always Full guides before do anything.... It prevent to brick your phone
problem solved, the missing RSPL/HSPL, thanks a lot
Related
I don't know why I use HTC_Uni_SIM_Unlock_v1 with my phone !!!!
Now I can,t use IT. During the boot stops same seconds after the windowsmobile screen. It's impossible to contact it.
Read "Problem 5: Device shows NO GSM when booting" on the Common Upgrading Problems in HTC Hermes" wiki page. Solution is there for you
Maybe we should post a warning along with the Universal SIM Unlock tool instructions... such as
DON'T EVEN THINK ABOUT USING THIS WITH A HERMES!!!!!!!
There seems to be at least a couple of new victims every week!
I follow solution n°5 but I have a broblem with the bootloader. The Buttons are correct ?
Thanks
domomedia5 said:
I follow solution n°5 but I have a broblem with the bootloader. The Buttons are correct ?
Click to expand...
Click to collapse
Yes: SIDE OK + POWER + STYLUS RESET
I not be able to connect via USB the phone ! The radio rom 1.20.31.10 don't recognize my phone
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
is this the correct rom
thanks
Yes, this is the correct rom:
If you get a "ERROR 120: COUNTRY ID ERROR", do not disconnect the device, run MaUpgradeUt_noID again.
when I arrive to the window from ver. to ver. there are no description of the version !
what can I do
No problem, this is normal it is because the device is in bootloader mode.
how many minutes I had to wait
no more than 30min
It's stop from 30 minutes on cheching information on your device !?!?!
If the Hermes screen shows "Upgrade Radio Stack Please wait........." just wait until it finishes, if not, reset your device and put it back in bootloader mode, and run MaUpgradeUt_NoID again.
Make sure you've previously run the 'erase' commands in mtty sucessfully:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
If you can not success with radio upgrade, do a full rom upgrade using a rom matching your CID, start the upgrade from bootloader and make sure usb connections in activesync is disabled.
Ok...I have been through all the posts about upgrading etc. I still have a problem and I'm sure that I'm overlooking something....but I can't figure it out on my own. Here is what is happening (it does the same thing with every RUU that I've used...the DST fix...upgrading to WM6....etc)
1. I run the RUU and let it go through its routine (extract files, verify info on pc, etc.)
2. I check the box that says I have read the readme and click next
3. The next screen appears and it has the following steps:
Connect to the USB cable (check)
Establish an ActiveSync Connection (check)
Disable standby and hibernation on PC (check)
Make sure batter is > 50% (check)
Then I check the box and click next
4. I pick the update and click on the update button
5. I verify that I want to upgrade my phone from ROM verion x.xx.xxx to x.xx.xxx and click next
6. The program tells me that I am finally ready to update...and if I am sure I want to proceed to click next...so I click next
7. As soon as I click next...the progress bar comes up on my pc and my phone goes into standby mode (no bootloader...just standby). The progress bar never moves.
8. After a minute or two the RUU give me the ERROR [260]: Connection
9. I reboot my device and repeat steps 1-8
10. I reboot my device and my computer and repeat steps 1 - 8.
Now if I leave my device connected to the usb and close out the RUU after it gives me the ERROR [260], and then run the RUU again...when it is first verifying the information on my pc (before it asks any questions and before it tells me to connect my device) it will throw the device into bootloader mode. If I try to keep running the RUU while the device is in bootloader mode it give me the error that my device is not connected. I have tried and tried...maybe one of ya'll can help me. Thanks in advance
Chris
Some questions:
.) Is your desktop PC running XP or Vista?
If you have a firewall running, close it.
.) If you running Vista check this guide:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
.) What updates did you try to flash?
.) Did you install Olipros bootloader first?
gerald_s said:
Some questions:
.) Is your desktop PC running XP or Vista?
If you have a firewall running, close it.
.) If you running Vista check this guide:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
.) What updates did you try to flash?
.) Did you install Olipros bootloader first?
Click to expand...
Click to collapse
XP
No firewall
I tried to flash the WM6 from AT&T I assume its beta
and no did not install the Olipros bootloader
Ok...I think I found out how to do this...Ya'll can tell me if I'm screwing something up.
I go through all the steps listed above until it gets to the progress screen. When it gets there I manually put the the device in bootloader mode (Power, side ok, and reset). Once I do this...the progress bar starts moving. I will let you know if this works...
Hmmmm
Its not the way it should work but if it works its ok
You should have installed Olipros HardSPL first and then try to flash an official rom. If its working then something with your download is wrong.
What ROM is on there now?
Has the phone been CID unlocked?
Oli's CustomRUU is better, you may want to unpack the ROM and put the NBH in a folder with Oli's RUU and then do the upgrade.
BTW, gerald_s is right, you should not have to do that... what you may want to do is put the phone in Bootloader mode manually (while not connected to the PC), then plug in the USB, then start the RUU. That helps some people with 260 error.
I've got the same damn issue... it's driving me crazy. I had this occur when I flashed my Hermes100 from the stock version to Custel's. After about 15 starts and reboots it took. I'm now trying to get to Vp3G's 3.60 and it continues to give me the 260 error.
I am trying to figure out how to fomat my micro, but really hoping to find a solution over cable.
Hermes 100
IPL 1.04
SPL - 2.10 Olipro
Any suggestions?
You may be trying to flash a rom that includes the radio rom. What is your device? Is it possible that your device is a new x01ht with radio 1.14 and radio bootloader 0182? If yes, then you will get this error when you try to flash a rom with this method because during the flash it will be disconnected by the radio bootloader because it is not overwriteable. If you flash using the NBH file on the microSD, it will skip past radio and radio boot and just flash the other parts of the file.
mikebraeuer said:
I've got the same damn issue... it's driving me crazy. I had this occur when I flashed my Hermes100 from the stock version to Custel's. After about 15 starts and reboots it took. I'm now trying to get to Vp3G's 3.60 and it continues to give me the 260 error.
I am trying to figure out how to fomat my micro, but really hoping to find a solution over cable.
Hermes 100
IPL 1.04
SPL - 2.10 Olipro
Any suggestions?
Click to expand...
Click to collapse
If you are running windows XP, just connect the card to the computer, open MY COMPUTER, right-click the removable disk that is your microSD and then click format. Default in windows xp is to format using FAT32 filesystem which is perfect.
The thing is... if you dont know how to format a drive in Windows, should you be flashing your device yourself?
Which Solution???
I've got a Softbank X01HT with:
S/N: HT639
SuperCID <--- result of checking by mtty
IPL: 1.04
SPL: 2.10Olipro
GSM: 1.47.00.10
OS: 3.54.07 WWE
I tried to flash with new Schap 3.54c but the process would not be done coz ERROR 262 or ERROR 302. Fortunately, after failure of flashing, my device is still normal running. Then I tried to flash radio 1.51.00.10 but I got the same above. Once again, I have just tried to flash splash screen and I got the same result too. It mean my device can not upgrade anything !
Anybody here show me a solution that help my device to become a normal device, I mean it will be able to flash anything ROM as it would be! Don't tell me READ and READ, I had read so much . And don't tell me use MTTY again SPL1.01MFG, I think that is a final solution
Wantoknow said:
I've got a Softbank X01HT with:
S/N: HT639
SuperCID <--- result of checking by mtty
IPL: 1.04
SPL: 2.10Olipro
GSM: 1.47.00.10
OS: 3.54.07 WWE
I tried to flash with new Schap 3.54c but the process would not be done coz ERROR 262 or ERROR 302. Fortunately, after failure of flashing, my device is still normal running. Then I tried to flash radio 1.51.00.10 but I got the same above. Once again, I have just tried to flash splash screen and I got the same result too. It mean my device can not upgrade anything !
Anybody here show me a solution that help my device to become a normal device, I mean it will be able to flash anything ROM as it would be! Don't tell me READ and READ, I had read so much . And don't tell me use MTTY again SPL1.01MFG, I think that is a final solution
Click to expand...
Click to collapse
Have you tried flashing with your microSD?
Kevbodian said:
Have you tried flashing with your microSD?
Click to expand...
Click to collapse
I forgot to tell that, I had flashed through extra memory card yet, and could be done!
But I wanna flash ROM against CustomRUU through MS Active Sync as I had used before. Can you help me
i have a problem very similar to Chris. when i check the box "yes activesync is syncronised", and then the progressbar shows up and the phone goes into standby.
i've turned standby of in powermanagement options.
my os is XP
i use active sync v4.5
and this is first time i try this.
i've read something about this bootloader, i can get there but then i cannot sync with active sync. so i kinda stuck.
have been searching the forums and this was the same problem as mine but i don't understand your solutions.
//KufrA
--Problem solved--
i did all things without activesync,
1. start phone in bootloader
2. do the install
3. wait 0% to 100%, and done.
is there a problem with active sync or why do i have to do anything with it at all?
I have a problem:
I flashed my hd2 from a stocked rom 1.42 dutch version, with hspl 1.42. I installed a custom rom from: HTC HD2 Laurentius WWE 21891UltimatePOWER.
it worked fine for 2 or 3 days and then it stocked, i reseted the phone and
When i turn on my HD2, i get a white screen. and it doest go away. Even after softreset (volume button down in bootloader)
When i go in to bootloader i see this screen:
Pb81100 hx-bc
Spl-1.42.hspl xe
0x05
Cotullahspl 0x30
Click to expand...
Click to collapse
When i try to instal a rom by going in to bootloader en then start in win xp the update wont start, it stocked at 0 %
Then i tried to flash a orginal romt by sd:
it stocked at 7 % and i get this screen:
_______________________RUUNBH
PB81100___HX-BC
SPL-1.42.__hspl___XD
________________0x05
CotullaHSPL______0x30
Upgrade ROM code error
Please try again
Click to expand...
Click to collapse
- Then i tried to flash a radio rom by activesync, in xp it wont start,
- i tried flashing by sd and it stocked on 98%
- I tried different to install a rom and radio rom by vista, but also no succes
- I tried task 29 (by the Attached Task29 into a single exe.) to erease all data from the phone, but in windows by activesync it wont start
i tried al the above from windows 7.
Is there anyone that can help me, please i getting very desperate.
VERY VERY IMPORTANT! Try and read 2-3 times what is written here http://forum.xda-developers.com/showthread.php?t=609477
Only afterwards proceed to the following :
First of all....try and use Windows Vista or Windows 7.
Second of all....do not try to use task 29 because its a bit more complicated and it involves some drivers and so on!
Use this little thing here http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 and after its completed....flash a proper radio something like 2.08.50.xx which you can find on Radio dedicated section here http://forum.xda-developers.com/showthread.php?t=611787
After all these....flash a custom ROM but be careful to be one suited with your radio! Which is a radio appliable for most of custom ROMS BUT be VERY careful!
Another thing.....do not flash from SD Card....Use the CustomRUU tool and flash it via ActiveSync!
Do you get any particular error message? When in bootloader mode, does "usb" show at the bttom of the screen? If so, try moving to a different usb port, preferably at the rear of the pc, or try different cable or even different pc. If still no luck, try uninstalling and then re-installing the latest version of Activesync.
The White Screen issue sounds like the incorrect radio version for the rom. I'm not familar with the details of the particular rom, but there are certain rom/radio combinations that will do that if they do not match eg running a 2.10 based rom with a x.xx.51.xx radio. The phone works intially until a reset and then hangs.
viperd said:
VERY VERY IMPORTANT! Try and read 2-3 times what is written here ......
Click to expand...
Click to collapse
Thanks for the replay
I tried, flashing by activesync. i flashed it the first time by hspl (the tread you link to) and then by activesync. But like i said, the hd2 stops at a white screen, so i tried by every possible way i could think of. Also i tried task 39 by the tool you mention, but it still does not work.
But i will correct my ts.
@clydeb1
I tryd to flash different radioroms, but if it try by activesync it wont start and by sd-flash it stocks at 98%, but i will try a different active sync
Okay,
I tried the following options:
- I installed a newest activesync and tried to instal an new rom under windows xp. The update stocked at 0% and i tried to install radio rom, with the same results
- I installed the windows mobile on windows 7, and tried the same as in windows xp, and still the same results.
Then i tried flashing every rom from the site by the sd-method (after every bad flash i formatted the sd-card with fat32)
With the sd method the phone stocked at 99% and then gives the next images:
00018003
LEOIMG.nbh - Fail
Radio_V2Fail
Update terminate
update fail
Click to expand...
Click to collapse
IS there any one how has a solution for this problem
Ok....try from the beginning!
1.Get from here http://forum.xda-developers.com/showthread.php?t=611433 HSPL2_RUN.zip (extract the content in a folder named hspl ).2
2. For Windows 7 you need Windows Mobile Device Center ( WMDC ) NOT ActiveSync!! Get it here http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
3. Make sure in WMDC settings the USB connection is checked!
4. Take out your battery....insert it again! Start your phone while keeping pressed the Vol Down button! This will get you into bootloader! The screen should display USB on the lower part of the screen! (evidently connected to computer )
5. Flash HSPL2 select 2.08 version
6. Use that tool I recommended earlier.....http://forum.xda-developers.com/show...3&postcount=19
7. Enter again the bootloader and flash a Radio ROM ( try 2.08.50.xx ) via WMDC!
8. Flash either NRGZ 21898 or Cleanex 21898 versions ( I recommend these in particular because they work with the radio mentioned above and are also stable ROMs ).
P.S. Take out your SD card and SIM card while performing all these steps!
Hope you will solve it!
viperd said:
Ok....try from the beginning!
1.Get from here (extract the content in a folder named hspl ).2
2. For Windows 7 you need Windows Mobile Device Center ( WMDC ) NOT ActiveSync!! Get it here
3. Make sure in WMDC settings the USB connection is checked!
4. Take out your battery....insert it again! Start your phone while keeping pressed the Vol Down button! This will get you into bootloader! The screen should display USB on the lower part of the screen! (evidently connected to computer )
5. Flash HSPL2 select 2.08 version
6. Use that tool I recommended earlier.....
7. Enter again the bootloader and flash a Radio ROM ( try 2.08.50.xx ) via WMDC!
8. Flash either NRGZ 21898 or Cleanex 21898 versions ( I recommend these in particular because they work with the radio mentioned above and are also stable ROMs ).
P.S. Take out your SD card and SIM card while performing all these steps!
Hope you will solve it!
Click to expand...
Click to collapse
Thanks for the advise
I did every step. The first problem is: WMDC doest say there is a connection, while windows 7 say there is a connection also i see usb in the lower part of the screen.
In the same sequence as you right above. the hspl2 says it worked fine, but when i reset the boatlooder still says it has hspl 1.42 in stead of 2.08. The tool you recommended did't start. and says update error.
do you know something else i could do (or anyone else)
Give the phone to someone who can get it to work??
Give me your SD-CARD serial number.
I'ma make a goldcard for you.
sd-card max to 4gb!
And then try flashing stock nld 1.66 rom using sd-card.
Because you tried to fix it flashing a 'original rom?' from sd I think I know what's your problem.
Did you use a Dutch shipped rom while trying to fix or a WWE one?
If you flash a shipped rom from storage card it restores the original SPL and removes HSPL !
Try flashing a Dutch shipped rom one more time from storage card, it will restore the original SPL made for your device.
korenbloem said:
Thanks for the advise
I did every step. The first problem is: WMDC doest say there is a connection, while windows 7 say there is a connection also i see usb in the lower part of the screen.
In the same sequence as you right above. the hspl2 says it worked fine, but when i reset the boatlooder still says it has hspl 1.42 in stead of 2.08. The tool you recommended did't start. and says update error.
do you know something else i could do (or anyone else)
Click to expand...
Click to collapse
Thanks mate, if my suggestion doesn't work hopefully you can help him.
xmoo said:
Give me your SD-CARD serial number.
I'ma make a goldcard for you.
sd-card max to 4gb!
And then try flashing stock nld 1.66 rom using sd-card.
Click to expand...
Click to collapse
@Korenbloem,
A simple hardreset would have fixed your issue as well.
Instead of all kind of panic experiments like mtty/ flashing radios/roms from sd you could have come to me and I would have helped you.
You flashed a very old rom from the rom archive but never the less that rom is intensivily tested by me and the beta team.
I have no idea what kind of software you installed/tweaks you did or anything else but also with installing the wrong software it could cause the rom not to boot anymore.
Sorry to tell you but these 'bricking' stories are mostly caused by unexperiened users and it
making me sad to see more people are opening threads like this blaming a rom and causing a panic reaction in public destroying our work.
I realy hope you fix your device and I will try to help you but this isn't a rom issue.
Leo
Laurentius26 said:
Because you tried to fix it flashing a 'original rom?' from sd I think I know what's your problem.
Did you use a Dutch shipped rom while trying to fix or a WWE one?
If you flash a shipped rom from storage card it restores the original SPL and removes HSPL !
Try flashing a Dutch shipped rom one more time from storage card, it will restore the original SPL made for your device.
Click to expand...
Click to collapse
Thanks for the adivse, but i already tried that with an orginal rom, but i will try it again, mabey there is a difference with a shipped rom.
The first thing i did was a hard reset, but that did't worked. (the phone is in this shape for 1 month now).
Second. I am not blaming you or anyone. I flashed the wrong radio rom i think (cant remember witch one) And that is my own fault. I never wanna make the suggestion that it is because of youre rom.
I took a risk by flashing my phone. and i is my responsibility.
Edit: I tried a shipping rom nld. But it gives the same error as always, only after 7%. But thanks for the advise
@ Xmoo, First of al thank you that you want to help with a sollution. But what does that mean a goldcard and what are the consequences of using it.
Laurentius26 helped me with fixing my device.
The problem was the radio. and by flashing a factory rom from t-mobile, the hspl was reset to spl 2.00. After that he flashed a orginal shipped rom (the orignal one from my device). And the rom is fixed again SPL 1.66 is now on the device.
Laurentius thanks for al the help!!!!!
HD2 bricked?
Hi, I urgently need your help. I used my hd2 on a vodafone branded rom 1.44. Last week I installed a Vodafone NLD 1.72 rom , + froyostone 3.4 Rom,kernel 8.5 (with hspl). Yesterday my touchscreen has stopped fully .. . The next, I've been in touch with HTC and they will pick up my phone tomorrow for repair. I have to remove hspl ofcourse .. so I happily try to flash official vodafone rom from the SD card, did nothing 1.72, 1.48 seemed to do until I restart and got an ROM code error. What to do: ( I am pretty desperate now .. when you start you get an exclamation point and then 'not allow' and then the tricolor. Is this due to the lack of the original 1.44 ROM? Apologies for this begging post and my poor English but I hope that someone has a solution to unbrick this device so he can up picked by HTC.
vanbasten88 said:
Hi, I urgently need your help. I used my hd2 on a vodafone branded rom 1.44. Last week I installed a Vodafone NLD 1.72 rom , + froyostone 3.4 Rom,kernel 8.5 (with hspl). Yesterday my touchscreen has stopped fully .. . The next, I've been in touch with HTC and they will pick up my phone tomorrow for repair. I have to remove hspl ofcourse .. so I happily try to flash official vodafone rom from the SD card, did nothing 1.72, 1.48 seemed to do until I restart and got an ROM code error. What to do: ( I am pretty desperate now .. when you start you get an exclamation point and then 'not allow' and then the tricolor. Is this due to the lack of the original 1.44 ROM? Apologies for this begging post and my poor English but I hope that someone has a solution to unbrick this device so he can up picked by HTC.
Click to expand...
Click to collapse
Do you have a branded Leo? If so, enter bootloader (remove battery, press volume down, insert battery), connect via usb (maybe you have to wait for driver installation), start the latest *.exe from your operator/carrier...
same problem here flashing an old radio... and now, everytime i try to flash a factory rom ship (RUU_Leo_HTC_PTG_1.66.410.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship) on 1% get the error 244 - invalid model id.
I tried to hard reset and now the message on the bottom of screen show me the right factory radio (2.06.51.07) of this rom but stays on this screen forever anyone knows what can i do? please help... tks a lot!
andreftx said:
same problem here flashing an old radio... and now, everytime i try to flash a factory rom ship (RUU_Leo_HTC_PTG_1.66.410.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship) on 1% get the error 244 - invalid model id.
I tried to hard reset and now the message on the bottom of screen show me the right factory radio (2.06.51.07) of this rom but stays on this screen forever anyone knows what can i do? please help... tks a lot!
Click to expand...
Click to collapse
Maybe it is because you flashed the wrong stock rom.
You should find the CORRECT STOCK ROM for your device, otherwise you need a gold card
silverwind said:
Maybe it is because you flashed the wrong stock rom.
You should find the CORRECT STOCK ROM for your device, otherwise you need a gold card
Click to expand...
Click to collapse
sorry but this rom i've downloaded from htc.com after insert model and my hd2 serial number and work for a while, but after flash hspl 1.42 to install another rom, when i flash a new radio version get the problem! so i flash again hspl to recovery for SPL 1.42.000 and then, nothing more is functional
tks 4 help... have anyone other solution?
andreftx said:
sorry but this rom i've downloaded from htc.com after insert model and my hd2 serial number and work for a while, but after flash hspl 1.42 to install another rom, when i flash a new radio version get the problem! so i flash again hspl to recovery for SPL 1.42.000 and then, nothing more is functional
tks 4 help... have anyone other solution?
Click to expand...
Click to collapse
The 1.66 ROM you posted above has radio version 2.06.51.07 with it. So have you considered trying to flash that radio version and then flash the ROM. I know if you get the ROM to flash it will flash that radio anyway. But you seem to think you flashed a wrong radio so just thinking out loud here.
Hello guys. I need to ask some detailed information about latest leaked Mango update. I'm very unexperienced Windows Phone user.
I just bought a unbranded (without operator programs-logos) HTC Mozart. I want to flash my Mozart with latest leaked Mango ROM. My phone has a windows version of 7392 NoDo. I just downloaded the RUU exe file. What are the steps of installation? Please tell step by step. Can i jump into bootloader mode or just "connect phone to pc,run zune and run ruu exe?"
Please help me, i'm really unexperienced windows phone user. I had some android phones for 4 years, very experienced android user (even android rom installation) but these operating system is unfamiliar for me. I'm very glad if anybody help me
I searched all windows phone threads but didn't find any guide. What are the steps of installation of Official Mango Update? Please help!
1) make sure you've downloaded the right RUU rom for your phone, or have your phone security unlock
2) power off, press power & vol- buttons to boot, you'll see "security unlocked" at the top if it's unlocked
3) connect your phone to your PC, "serial" on the screen will turn to "USB"(if not, you have to install the windows mobile device center manually)
4) run the RUU on your PC, then the mango goes from here~ enjoy
WARN: MAKE SURE YOUR PHONE DID NOT INSTALL ANY RSPL/HSPL(check it on the same screen, right info is SPL xxxx)
Thanks for your reply I'm really appreciated.
can i install Europe update for unbranded device in Asia?
life25ak said:
can i install Europe update for unbranded device in Asia?
Click to expand...
Click to collapse
You should probably use the Asia ROM.
Ok, Im confused!!!
I have a HTC Mozart, with simlock to Orange UK
From the debranding/flashing guide found : http://forum.xda-developers.com/showthread.php?t=1002391 - I thought i followed it to the letter....
Download a ROM which is by the same network as you're on (for example if you're phone is currently locked to Orange UK then download RUU_Mozart_Orange_UK_1.22.061.10_Radio_5.50.09.18_ 22.24.50.09U, by ansar. - do not download 1.30!). Done
Open up ActiveSync/Mobile Device Center
Flash this ROM to your phone (you may not need to do this step, but most users will).
Turn your phone off.
Put your phone into Bootloader Mode - this can be done by pressing and holding the Volume Down Key & Power Button.
Plug your phone into your PC, hopefully a HTC USB driver will install.
Once the driver is installed your phone should display USB mode.
Extract the zip file and then run the exe file
Run through the update process
When your ROM is flashed, your phone will want you to customise it - just do the basic stuff.
Done all this - brilliant - I now have:
OS 7.0.7004.0
FW Rev No 2250.09.12210.061
HW Rev No 0004
Radio SW Vers 5.50.09.18_22.24.50.09u
Radio HW Vers A.102.0.D4
Bootloader 1.22.2250.10 (110809) 40
Download the ROM you would like to flash (e.g. RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33 b.50_RELEASE).
Extract the unbranded ROM zip file and then extract the exe file (WinZip will not do this - try 7zip or similar).
Copy the RUU_signed.nbh from the unbranded ROM
Extract the branded ROM exe
Paste the RUU_signed.nbh from the unbranded ROM to branded ROM
Plug your phone back into the PC in bootloader mode
Run RomUpdateUtility.exe file from the branded ROM (but with the unbranded RUU_signed.nbh file)
Follow the steps...
Et voila, you'll have (if all goes well) and unbranded ROM installed
Last step, plug your phone back into your PC and run Zune. Your phone should receive the latest cumulative update.
No matter what I do, this bit will not work!! I follow it to the letter! it either gets stuck at 0% then fails OR vendor ID wrong!! Plllllleeeease tell me what Im doing wrong...! and what I need to do to get this thing running A ok again!!! At this minute, Ive connected this to Zune and the Feb 11 update will not install - keeps telling me to unplug and reconnect..... I think after 3 hours of trying - I think its as good as its gonna get! lol
I was trying to get the internet tethering thing done as Id seen the euro update seems for some users at least to be working..... (dont shoot!) lol
Can anyone help??
Hi piggyman1978, u got vendor ID wrong because u cannot flash custom rom without HSPL try search from forum ... cheerz
Sorry - thread needs deleting now - solved - thank you for your help!