Guys, I plan to flash Mui Galnet 1.12.9 from a newly rooted android stock 2.1.
would this be safe ?
or will it cause an issue?
Note: In the Mui Galnet Manual, the international version of Samsung Galaxy S requires 2.2 before flashing.
the first time you flash it, it will boot loop you, pull the battery and use the 3 button combo to get back into recovery, and flash again.
bfranklin1986 said:
the first time you flash it, it will boot loop you, pull the battery and use the 3 button combo to get back into recovery, and flash again.
Click to expand...
Click to collapse
I plan to follow the steps on the website below:
http://theunlockr.com/2010/10/12/ho...droid-phone-after-any-one-click-root-methods/
Your suggestion seems to confuse me as to why I have to flash the miui gingerbread rom for a second time. I would appreciate it if you explain your reason.
Because it will bootloop, so you pull battery and reboot into recovery again and reflash the zip back over itself like you would do with CM7. Look at Noob_in_N33d's guide on how rom flash MIUI. It is stickied and has everything you need.
Btw anything from unlocker.com is about as generic as it can come. Use the users guides here. That is what XDA is for, right?
Related
I am coming from one of team whiskeys 2.1 roms and I havent looked much into other roms since then about 2 months ago or so. I want to try going Froyo with Nero 3. I have Odin downloaded and kind of get how to use it and stuff. But when going from eclair to froyo everybody says to odin to stock.. Well which rom is the stock one and is it stock 2.1 I am supposed to odin back to or is it the 2.2 stock? and Is there any other steps I should follow after odin-ing back to "stock" I have downloaded much of what I needed and have been searching for a while And i remember seeing a post a long while ago on the steps i should follow but my search skills aren't the greatest. Thanks in advance for any help!
dev_man77 said:
I am coming from one of team whiskeys 2.1 roms and I havent looked much into other roms since then about 2 months ago or so. I want to try going Froyo with Nero 3. I have Odin downloaded and kind of get how to use it and stuff. But when going from eclair to froyo everybody says to odin to stock.. Well which rom is the stock one and is it stock 2.1 I am supposed to odin back to or is it the 2.2 stock? and Is there any other steps I should follow after odin-ing back to "stock" I have downloaded much of what I needed and have been searching for a while And i remember seeing a post a long while ago on the steps i should follow but my search skills aren't the greatest. Thanks in advance for any help!
Click to expand...
Click to collapse
If you are on Fusion 2.1, just use rom manager and install this using install from SD card option. You should be OK. If that does not help try ODIN.
Incase you are stuck and need to revert back to stock or want to take the long route just incase then use this file
Stock Rom
PIT File for ODIN
Thanks. I just tried it and everything seemed to have flashed over okay. I just didnt know if it was required to odin to stock first or not. Everything is working pretty good so far. gonna mess around with a few new kernels now.
Cant seem to get clockwork mod recovery to work
Any suggestions on how to get back into the clockwork mod recovery so i can install from zips again?
dev_man77 said:
Any suggestions on how to get back into the clockwork mod recovery so i can install from zips again?
Click to expand...
Click to collapse
Install Rom Manager from Market, Make sure you have Busy Box & Super user app. Launch rom Manager, Select Clockwork Recovery, Select your device from pop up window. Select Reboot to Clockwork Recovery menu. Phone will restart, select reinstall packages it will restart again and take you into Clockwork menu.
Tried this twice and it keeps taking me back to the stock recovery mode... Dont know why.
*edit*
Had to reinstall packages twice and it finally worked. Everything is gravy. Gonna see if the SuperIO kernel is better than the stock+Voodoo5...
i have a samsung fascinate on verizon. now i used to have fun with roms and themes and what not on my phone.... since the update of the clockwork mod, it has been impossible. i have tried everything, amend2edify programs, odin, and every superclean rom seems to have the same thing, nothing differs and my phone goes right back to a new superclean rom i used and it is impossible to theme it or do anything different other than use it. this is boring and extremely frustrating. with no customization, what good is the phone?
if it helps.. my firmware is 2.2.1 / eb01 / dl09
im lost. everytime i try to flash anything from cwm i get an error, it takes my phone 4 mins to boot and then nothing. every time!
I know i am rooted successfully, seems once they switched from amend scrpts i lost my talent? and the cwm i have is orange screen (latest one dl from market and flashed) and i STILL boot to blue recovery and have to run update.zip to get to orange, without fail every time. it will not load on its own when i boot to recovery. crazy. maybe i am missing something here? someone please help me!
thank you.
phil4c said:
i have a samsung fascinate on verizon. now i used to have fun with roms and themes and what not on my phone.... since the update of the clockwork mod, it has been impossible. i have tried everything, amend2edify programs, odin, and every superclean rom seems to have the same thing, nothing differs and my phone goes right back to a new superclean rom i used and it is impossible to theme it or do anything different other than use it. this is boring and extremely frustrating. with no customization, what good is the phone?
if it helps.. my firmware is 2.2.1 / eb01 / dl09
im lost. everytime i try to flash anything from cwm i get an error, it takes my phone 4 mins to boot and then nothing. every time!
I know i am rooted successfully, seems once they switched from amend scrpts i lost my talent? and the cwm i have is orange screen (latest one dl from market and flashed) and i STILL boot to blue recovery and have to run update.zip to get to orange, without fail every time. it will not load on its own when i boot to recovery. crazy. maybe i am missing something here? someone please help me!
thank you.
Click to expand...
Click to collapse
I believe u need to odin a stock rom/kernal/radio package before switching roms. Look up the official verizon ed05 pacakage in the development section. Also read the stickies in there aswell.
Odin ed05.tar w/ pit
Boot up once
Odin cwm that's required by rom
Boot into recovery
Wipe data
Install rom.zip
i am trying this now. thank you in advance!
ok now, forgive me for sounding like an idiot (cuz i am) when you say odin cwm required by rom, am i sideloading cwm basically thru odin? and where would i find a download for cwm? im stock ed05 across the board now. thanks!
phil4c said:
ok now, forgive me for sounding like an idiot (cuz i am) when you say odin cwm required by rom, am i sideloading cwm basically thru odin? and where would i find a download for cwm? im stock ed05 across the board now. thanks!
Click to expand...
Click to collapse
yep here ya go
http://dl.dropbox.com/u/25089906/cwm-recovery-ALL.tar
odin this after you have booted up on ed05 once
boot into cwm by holding both volume up/dow and power buttons until the samsung logo appears twice
wipe data
install powerwashED05.zip from sd card
reboot and enjoy your rooted/debloated/de touchwized/ deodexed/zip aligned rom!
thank you for all of your help. i am now back to enjoying my phone everything works perfect and it is just the way i want it. now all i need to do is start to keep up with the changes so i dont lose track of how to do stuff.
thanks again!
Glad that it worked...enjoy!
hi guys
I recently bought a 2nd hand Vibrant for a really good price.
As far as i see the Vibrant is already rooted with 2.2.1 Lidroid, and CWM installed.
The battery usage is amazing with this rom, but I still fancy to install some custom GB roms.
I have some questions:
1. I would like to check if I am already on GB bootloader, please guide me to check?
2. If I am not on GB bootloader, I know I must first install it.
I wonder if Vibrant has some stock GB firmwares like captivate does? The stock camera is a must for my case ><
Am i correct if I follow this method from here
http://forum.xda-developers.com/showthread.php?t=1156832
3.Or actually I can simply flash any custom GB roms directly from where I am (Lidorid 2)
THX
Okay you know if you're not gb bootloaders when you turn on ur phone there's weird rainbow lines
If not then you are
And if you are then yea you can flash any rom
Sent from my GT-I9000 using xda premium
Let me confirm if you suggesting me to flash the GB roms?
If there's rainbows > froyo bootloader
if nothing > GB bootloader
So can i say actually Gb roms doesnt really need GB bootloader
as long as I am fine with the rainbows?
THX
j4371 said:
Let me confirm if you suggesting me to flash the GB roms?
If there's rainbows > froyo bootloader
if nothing > GB bootloader
So can i say actually Gb roms doesnt really need GB bootloader
as long as I am fine with the rainbows?
THX
Click to expand...
Click to collapse
I've run CM7, and CM9 (ICS) on Froyo boot loaders. For me it just makes the kernel screen flash and show again, then goes on to ROM booting. I'm running a Froyo boot loader right now.
Is lidroid a t959 rom or a t959v?
You need to have a t959 to be in the vibrant 3g section, otherwise you'll probably want the galaxy s 4g section.
Sent from my Sensation using Tapatalk 2
there is a Lidroid version for T959 - I have a Odin flash with it. I use it instead of JFD.
Want to know if you have the GB boot loaders? Easy -
Hold the Volume up button and the power button at the same time. If it goes to download mode....you got the GB bootloaders.
T959 Vibrant does not have Samsung 2.3 support. Samsung forgot about us after Froyo. There Froyo OTA upgrade bricked so many phones that they wont chance it again.
For 2.3 Gingerbread you will have to download a I9000 port found in our Development section. That said the ICS packages are very nice for Vibs too.
need help guys
A few hours ago, I was at work and bored.
I started to flash some GB roms without coming back to check this post.
The rom i used was phiremod-fusion-2.1.1.
As usual I nandroid my lidroid before doing anything.
Then I 3 wipes and flash the phiremod rom.
first time the flash was really quick and also rebooted itself.
But only this time I realise I have a newer CWM 5.xx version instead of my 2.xx version (Lidroid)
Ok, i wasn't panic, because i read some where before. It's prefectly fine for a cm7 if the first time it bootloop.
Then I pull battery, and boot into recovery again, to flash the 2nd time.
this time BAAM, prefect. I found myself with a 2.3.x cm7 mod rom.
but as soon as I found the camera apk is actually the MIUI one. I decided to nandroid back to Lidorid.
things turns ugly at this point, when i back to CWM i restored.
But only found some errors CWM said , but I remember CWM did say something like erasing boot.img before restoring.
After the resotre failed, I accidentally reboot my phone.
And now my vibrant only stuck at the typical black boot screen "Vibrant in the middle with samsung at the bottom.
I tried to boot back to recovery, but no luck.
right now I am telling myself i probably need to restore to stock.
Can my fellow xda members guide me the proper way to
1. boot CWM
2. download mode
Given the fact that I am not too sure about which bootloader I am on.
THX people!!
Yup, you'll need to go back to stock. There are plenty of write-ups on how to do it.
Also, NEVER restore a 2.2 backup after you install 2.3 or higher. The file systems and partitions are different. Odin back to stock, install lidroid again, and then try to restore your backup.
j4371 said:
need help guys
A few hours ago, I was at work and bored.
I started to flash some GB roms without coming back to check this post.
The rom i used was phiremod-fusion-2.1.1.
As usual I nandroid my lidroid before doing anything.
Then I 3 wipes and flash the phiremod rom.
first time the flash was really quick and also rebooted itself.
But only this time I realise I have a newer CWM 5.xx version instead of my 2.xx version (Lidroid)
Ok, i wasn't panic, because i read some where before. It's prefectly fine for a cm7 if the first time it bootloop.
Then I pull battery, and boot into recovery again, to flash the 2nd time.
this time BAAM, prefect. I found myself with a 2.3.x cm7 mod rom.
but as soon as I found the camera apk is actually the MIUI one. I decided to nandroid back to Lidorid.
things turns ugly at this point, when i back to CWM i restored.
But only found some errors CWM said , but I remember CWM did say something like erasing boot.img before restoring.
After the resotre failed, I accidentally reboot my phone.
And now my vibrant only stuck at the typical black boot screen "Vibrant in the middle with samsung at the bottom.
I tried to boot back to recovery, but no luck.
right now I am telling myself i probably need to restore to stock.
Can my fellow xda members guide me the proper way to
1. boot CWM
2. download mode
Given the fact that I am not too sure about which bootloader I am on.
THX people!!
Click to expand...
Click to collapse
Get into download mode by while it's off, holding VOL-UP + Vol-DOWN and plugging in USB.
y vibrant revived!!
Thx everyone
After this, I am thinking to ask my colleagueto make one JIG for me.
I'd like to confirm it's same as SGS, i.e. 3 X 10kohm in series
hi,
I am sorry if this is a dumb question. But i have failed several attempts while shifting to ICS (RC 5 by team-nyx). Every time when i install ROM & kernel via CWM and boot the device (vibrant t959) it freezes on the screen with VIBRANT and SAMSUNG displaying WHITE on BLACK back ground.
i have gone back to JFD and tried several times BUT same result.
I was on froyo 2.2 (build UVKB5) updated via kies and did it but no luck. I followed wiki.cyanogenmod.com/wiki/Samsung_Vibrant:_Full_Update_Guide and did starting from No. 03 --
downloaded Cmenard's Kernel with the ClockworkMod Recovery 2.5
Heimdall Suite 1.3.2 for windows
AND upto No. 9 under Windows ONLY: section
the CWM installs as it says (A blue transfer bar will appear on the phone showing the kernel being transferred. The device will reboot automatically. )
after that i cleared factory, cache and dalvik cache.
then I select install Zip from SD card and chose the ROM (which is from team-nyx.com/index.php/releases).
after 3% it says rebooting and vibrant shuts down and reboots.. when after I clicked the combo (vol+vol-power) to enter the CWM its not there.. so I reinstall using [heimdall flash --kernel zImage] command in PC's cmd. then after i redid the same to select from SD and then ROM installed ok.
then I selected the kerenel which was taken by same source and installation went normal..
after I select reboot from CWM it reboots and hangs on vibrant screen.
I cannot figure OUT WHAT IM doing WRONG..
Please HELP ME..!!!
thank you for your time
I am moving to 2.2 via kies after going back to stock JFD. then i will root my vibrant. after that i will install ROM manager from market. THEN i will try to FLASH to ICS RC 5 + kernel from nyx TEAM.
I dont know what is wrong.. please HELP
From what you told us it sounds right. Have you tried a different ICS rom? Give ICS slim a try. When you Odin back did you checked re-partition?
Sent from my SGH-T959 using Tapatalk 2
You should try flashing the Gingerbread bootloaders using Odin after you flash back to stock. Those bootloaders can run a Froyo ROM as well as ICS so it wouldn't hurt to do either way. After you flash the bootloader then try flashing the ROM.
And try a different ROM like iwillkillyou suggested. Slim is good, but ICZen is very solid if you're tipping your toes into ICS.
iwillkillyou said:
From what you told us it sounds right. Have you tried a different ICS rom? Give ICS slim a try. When you Odin back did you checked re-partition?
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
hi,
thank you for the reply. No i havent tried a different ROM. yes I checked repartiton when ODin Y this is happening.. I have Flashed this ROM once.. but then when someone calls me they cudnt hear me clearly.. when i initiate the call its ok.. so I moved back to JFD..:/
kaiser_bun said:
You should try flashing the Gingerbread bootloaders using Odin after you flash back to stock. Those bootloaders can run a Froyo ROM as well as ICS so it wouldn't hurt to do either way. After you flash the bootloader then try flashing the ROM.
And try a different ROM like iwillkillyou suggested. Slim is good, but ICZen is very solid if you're tipping your toes into ICS.
Click to expand...
Click to collapse
thank you for the reply.. I jz finished Updating to 2.2 via kies..ok I will flash Gingerbread bootloaders using Odin. I will try I think it wont be necessary to ROOT the vibrant..to Flash Bootloaders.. I am going to Flash the ICS ROM via ROM manager (after rooting via SuperOneclick root2.3.3)..
haarsh said:
thank you for the reply.. I jz finished Updating to 2.2 via kies..ok I will flash Gingerbread bootloaders using Odin. I will try I think it wont be necessary to ROOT the vibrant..to Flash Bootloaders.. I am going to Flash the ICS ROM via ROM manager (after rooting via SuperOneclick root2.3.3)..
Click to expand...
Click to collapse
Just so that you know, everytime you are using Kies, you are running the risk of hardbricking your device. It is notorius for that and in fact someone last week got HBricked with it.
I don't use ROM Manager and probably won't as long as I have a Vibrant. All you need to do is go back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall PAckages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Also for more detailed instructions, se my ICS install giude also in my signature.
Woodrube said:
Just so that you know, everytime you are using Kies, you are running the risk of hardbricking your device. It is notorius for that and in fact someone last week got HBricked with it.
I don't use ROM Manager and probably won't as long as I have a Vibrant. All you need to do is go back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall PAckages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Also for more detailed instructions, se my ICS install giude also in my signature.
Click to expand...
Click to collapse
Thank you for the links.. I downloaded and place CWR inside SD. Without kies can we install official releases via Odin.. is there any way.. im sorry if that is a stupid question
No stupid questions. That is why we are here. I am pretty sure there is a flashable 2.2 stock floating aroung here. I personally don't have it though. Custom 2.2's are at this point tweaked so completely out, that they will blow the doors off any 2.2 stock ROM out there. I usggest Moped_Ryder's ROMs and Fishman's Bionix-redux ROMs. Quality, fast and stable. Not ICS, but everything works and no fear of the dreaded Encryption Bug.
PM incoming btw.
Woodrube said:
No stupid questions. That is why we are here. I am pretty sure there is a flashable 2.2 stock floating aroung here. I personally don't have it though. Custom 2.2's are at this point tweaked so completely out, that they will blow the doors off any 2.2 stock ROM out there. I usggest Moped_Ryder's ROMs and Fishman's Bionix-redux ROMs. Quality, fast and stable. Not ICS, but everything works and no fear of the dreaded Encryption Bug.
PM incoming btw.
Click to expand...
Click to collapse
thank you. btw can we Flash to 2.2 via CWM .. directly selecting the ROM from SD .. without Odin
If you can find it, you should be able to. Just put on your card and flash away, taking care to wipe accordingly.
A note on flow though:
2.1, 2.2 -can go into and out of any 2.2 there is laterally.
2.3-4.0 -will need to Odin to stock before going back to a 2.2 ROM. Can move laterally from 4.0 to 4.0 though.
(i.e DO NOT try to restore a 2.2 nandroid or flash a 2.2 ROM when you are on an ICS variant. the /system is completely changed and reformatted. You need to Odin to get it back.)
Moped Ryder uploaded a semi tweaked version of the stock 2.2 build. It's a zip that you can just flash using CWR:
http://forum.xda-developers.com/showthread.php?t=1674519
It comes rooted with busybox and some other goodies, but it's the stock kernel and whatnot. I'd highly recommend Fishman's Bionix-V Mod or Moped Ryder's Slim_Ryder ROMs if you're going to be on Froyo though. They're both great, but I went with Fishman's latest Bionix Mod since I couldn't get bluetooth to work on Moped Ryder's ROM. Which is really unfortunate because I loved Moped Ryder's otherwise.
And you don't have to Odin back to stock if you're just bouncing around Froyo or Eclair builds; only if you're coming from Gingerbread or ICS (2.3 or 4.0).
Keep us updated. I'm curious to see what worked. It's probably the gingerbread loaders. But, who knows.
Sent from my SGH-T959 using Tapatalk 2
Is your Samsung Vibrant (T959) Rooted.?
iwillkillyou said:
Keep us updated. I'm curious to see what worked. It's probably the gingerbread loaders. But, who knows.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
hi.. I tried again with flashing semaphore kernel through Odin installed CWM version higher than 2.5 to install ICS RC5 by nyx --sorry i need that soo badly so didnt checked anything else ..
@that time I was on vibrant 2.2 UVKB5 (stock)
NOT rooted
I didnt had so called
bootloaders
Click to expand...
Click to collapse
(i dunno what it means though--have to search )
BUT it didnt worked for me instead freezes at Vibrant start-up screen. So i Couldnt switch back to CWM. I Odin back to JFD with repartition clicked and my vibrant was locked (network lock). Finally, I got it cleared by application named Galaxy_S Unlock by Helroz from the market.
Now I am at the very beginning again. I am now on 2.1 JFD. I dont know WHY this happening to me .. :crying:
gonna try again with GB bootloaders.. BUT Im sick of failing and going back to 2.1 (my friends who are having captivate had no problem)
Speedy5150 said:
Is your Samsung Vibrant (T959) Rooted.?
Click to expand...
Click to collapse
At the time i was trying it was NOT rooted.. But now i have it rooted because i needed to unlock the network . which happened me for the very first time after flashing back to JFD using Odin..
Thank you guys for the links and thoughts on 2.2 ROMs.. I am not that expert . Thats why i was updating to 2.2 via KIES -- which is not a good idea as it seems with the ability 2 brick the device. I am going to get Bionix-V FishmanMod V4 FULL and install as http://forum.xda-developers.com/showthread.php?t=1441976 says..
It says Boot into clockwork recovery and i think i found something to do that in this thread http://forum.xda-developers.com/showthread.php?t=734164
I have to get ROM manager from market and go through it..
BUT Im damn upset with the RC5 ICS update by nyx being unable to installed into my device.. I will try with GB bootloaders flashed ..
If you are going to go with Fish's ROM, then all you need to do is Odin back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall Packages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Fish also has a Odin package that you can flash his ROM through Odin and not have to deal with CWR.
ROM Manager is no longer supporting 2.1, so if you do go back to JFD, then it will be hard to get RM. It is out there somewhere but really all you need is the Update.zip from above to do it. I suggest that you stay on Fish's ROM for awhile and read about ICS installs and all the little things that are involved. If you do flash Fish's ROM, you don't need to mess with the bootloaders.
Btw, aside from Kies, messing with Bootloaders is one of the sure fire ways to hardbrick your device. It only takes seconds to flash them, but do it wrong and, well you know.
Good luck and ask if you have any.
Woodrube said:
If you are going to go with Fish's ROM, then all you need to do is Odin back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall Packages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Fish also has a Odin package that you can flash his ROM through Odin and not have to deal with CWR.
ROM Manager is no longer supporting 2.1, so if you do go back to JFD, then it will be hard to get RM. It is out there somewhere but really all you need is the Update.zip from above to do it. I suggest that you stay on Fish's ROM for awhile and read about ICS installs and all the little things that are involved. If you do flash Fish's ROM, you don't need to mess with the bootloaders.
Btw, aside from Kies, messing with Bootloaders is one of the sure fire ways to hardbrick your device. It only takes seconds to flash them, but do it wrong and, well you know.
Good luck and ask if you have any.
Click to expand...
Click to collapse
thanks alot for the info brother.. some guys told me STUPID.. but YOU guys are awesome.. I am a newbie to this flashing and stuff.. but learned a lot from XDA . Thanks again for the reply. now I have stock 2.1 with ROOT . (rooted cuz i had to unlock the vibrant). I will flash to Fish's 2.2 ROM soon. BTW may i ask you after moving to Fish's ROM and later if i need to move to ICS still can I do it without messing with Bootloaders..
Thank you
That is what we are here for in the Q&A/General sections.
Regaring your question about Gingerbread bootloaders being needed:::Yes and No.
Gingerbread bootloaders were required in the infancy of ICS ROMs bc they prevented what is called "Rainbows" in your clockwork where you couldn't see anything. The options were there but you just couldn't see them. Then as ICS evolved, the need for GB bl's lessened and now you don't need them at all.
But...There's always a but...Gingerbread bl's are recommended by most of the devs for ICS builds because they seem to work better with the custom recoveries that come with some of the kernels. There is more to it but in short, GB bl's are not required but recommended.
If you go to my ICS install guide, in the middle pages and more again at the end, Yosup (highly respected user) and I have a detailed conversation about bootloaders and their installation. Once he got over the fear and did it, he was hooked and flashing ICS ROMs weekly if not more. It is a very informative section of that thread.
Hello, I am having trouble flashing other roms on my phone. I have CWM and Cyanogenmod running, but whenever I try to flash another rom, the phone just boots back into Cyanogen. Am I missing a step here? My phone is a Samsung Galaxy S 4G, and I am trying to flash the latest ICBINB rom. I've been reading other threads but I just can't seem to find a solution.
Thanks
wheredoesitgo said:
Hello, I am having trouble flashing other roms on my phone. I have CWM and Cyanogenmod running, but whenever I try to flash another rom, the phone just boots back into Cyanogen. Am I missing a step here? My phone is a Samsung Galaxy S 4G, and I am trying to flash the latest ICBINB rom. I've been reading other threads but I just can't seem to find a solution.
Thanks
Click to expand...
Click to collapse
Could you provide a bit more information? Does the attempt to flash the ROM fail? Do you get any errors when trying to flash a new ROM? If a ROM flash is successful, there is no possible way for the device to boot up with a previous ROM since the system would be completely erased.