I have a rooted Amaze with just some bloatware removed. Yesterday I received a notification in the status bar that a system update was available. When I try to run the update the phone reboots and then freezes with a big green X on the screen. Doesn't look like something official. Has anyone seen this before or know what it's about? I'm thinking maybe it's just failing to run the update because of being rooted or a related issue but can't find any info on Google about the green X.
I finally pulled the battery out because it wouldn't respond and then turned the phone on again. It booted fine and I still have the notice about the update. I'm reluctant to try again until I find out what's going on. Thanks.
I don't think you're able to install an update through a custom recovery..There should be a ROM with that update already in it.
If you have a Custom ROM you can't take the update that is intended for stock unrooted ROMS.
Sent from my HTC Amaze 4G using xda premium
Thanks for the feedback. I don't have a custom rom - just the stock minus some bloat. I can see how the custom recovery, however, might interfere.
I can't find any info on the update and what it includes or why I might want/need it but assuming it would be good to install then is there an easy way to remove the custom recovery? Would running the stock update.zip do this or do I need to go through the full un-root process?
If you have CWM recovery already,
1. Go to /downloads folder inside the internal Storage. You can find the OTA.
2. Rename it to "update.zip" and copy to External SD.
3. Reboot the device to recovery.
4. Select update.zip and update manually.
5. After update & reboot, delete both original files to get rid of notification.
Thanks for the directions. Tried and got this error
Code:
verifying current system...
assert failed: apply_patch_check("/system/app/FriendStream.odex", "some very long hex number", "some other long hex number")
E:Error in /sdcard/update.zip
(stage 7)
Installation aborted.
droidux said:
Thanks for the directions. Tried and got this error
Code:
verifying current system...
assert failed: apply_patch_check("/system/app/FriendStream.odex", "some very long hex number", "some other long hex number")
E:Error in /sdcard/update.zip
(stage 7)
Installation aborted.
Click to expand...
Click to collapse
Seems its not possible as you have removed some programs
Think you removed friendstream also.
It seems to work only if the ROM is unmodded
skr_xd said:
Seems its not possible as you have removed some programs
Think you removed friendstream also.
It seems to work only if the ROM is unmodded
Click to expand...
Click to collapse
Yes, I removed facebook and friendstream. Not sure why those would be necessary to run a system update but you may be right about not being able to update a modified phone. Maybe the update isn't anything I need anyway if it wants to update an app I don't want.
Thanks for the help.
In case anyone has a similar issue, here is what I've figured out.
The update won't run on a modified system - even if it's a stock, but changed, rom. In the interest of exploration, I restored my backup using clockwork and then ran the update. It still didn't work, but following skr_xd's advice above I was able to run the update manually. The result was a more or less stock phone without root but with the most current software. I then re-rooted the phone and re-removed all the bloat with no apparent ill effects.
Thanks for the help.
Btw, I didn't know what the green X was all about, but I think it's related to clockwork mod. Could be wrong though.
droidux said:
In case anyone has a similar issue, here is what I've figured out.
The update won't run on a modified system - even if it's a stock, but changed, rom. In the interest of exploration, I restored my backup using clockwork and then ran the update. It still didn't work, but following skr_xd's advice above I was able to run the update manually. The result was a more or less stock phone without root but with the most current software. I then re-rooted the phone and re-removed all the bloat with no apparent ill effects.
Thanks for the help.
Btw, I didn't know what the green X was all about, but I think it's related to clockwork mod. Could be wrong though.
Click to expand...
Click to collapse
yes its the custom clockworkmod i made
xboarder56 said:
yes its the custom clockworkmod i made
Click to expand...
Click to collapse
Thanks for the confirmation and awesome software. I noticed there is work on version 5.0.2.7. Assuming it would be wise to update once released.
Same issue here. I have stock rom without any bloatware removal.
I just unlocked the bootloader than installed CWM and rooted the phone.
when I try to update phone OTA it stucks in splash screen (With Big Green X logo)
Flash prerooted rom you good to go
Sent from my HTC Amaze 4G using xda premium
I just spent abut 4 hours trying t figure this out...
This is my journey..
Relock bootloader
Flash one of the stock tmobile ruby rom in development section
Did the OTA update on stock
Unlocked my bootloader again
Then i tried to root using one click zerg method but it didnt work
So i flashed clockwork mod using fast boot
Then applied a su binary update i found in the development section.
In less than a minute i got root back.
Then i restored my data from nandroid backup.
My phone is pretty much rooted, bootloader unlocked, bloatware free alongside having the ota update that enabled wifi calling installed.
You don't need to relock your phone to do the update. If you do xboarder's recover to stock method just skip the relock part you can update your phone. So far going back to stock is the only way to get the radio updated as well which I am noticing way better 4g coverage than before!
bmbrad said:
You don't need to relock your phone to do the update. If you do xboarder's recover to stock method just skip the relock part you can update your phone. So far going back to stock is the only way to get the radio updated as well which I am noticing way better 4g coverage than before!
Click to expand...
Click to collapse
working on a way maybe this weekend will have it ready
xboarder56 said:
working on a way maybe this weekend will have it ready
Click to expand...
Click to collapse
NICE! Dude you must never sleep! Always the first to get something done!
I figured out what to do. You just need to rename this update file to update.zip. then reboot in recovery and choose install update from sd card. Next navigate to download folder and install update.zip file. You will be updated and stay rooted at the same time.
This worked for you because you didn't remove any of the t-mobile bloatware from your phone.. This will not work for people who messed with the pre-installed bloatware.
darll said:
This worked for you because you didn't remove any of the t-mobile bloatware from your phone.. This will not work for people who messed with the pre-installed bloatware.
Click to expand...
Click to collapse
Maybe, but 8m I've got another problem after updating this way. Wifi doesn't work anymore. I receive an error while trying to switch on wifi.
Related
This is going to be simply a collection of links with important points...Please read ALL directions and comments carefully...as no one is responsible for any damage to your phone.
NOTE 1: IF YOU ARE UNROOTED AND ALREADY UPDATED WITH OTA, YOU CAN STILL USE THE PROCESSES BELOW TO ROOT AND FLASH RECOVERY.
>> Rooting Samsung Fascinate
>> Flashing Clockwork Recovery
NOTE 2: IF YOU ARE ROOTED AND WANT TO KEEP ROOT, DO NOT INSTALL VERIZON OTA UPDATE. WAIT FOR DEVELOPERS TO POST A ROOTED UPDATE.
If something went wrong and you did not have recovery installed, use Odin to restore system to stock >> Odin Restore files to get you to stock
If something went wrong, but you are still able to get into clockwork recovery >> Stock Nandroid Image
NOTE 3: IF YOU ARE ROOTED, HAVE LAGFIX AND APPS REMOVED, DO NOT INSTALL VERIZON OTA UPDATE. YOU WILL RUN INTO ISSUES. YOU NEED TO COMPLETELY GO BACK TO STOCK, THEN UPDATE. YOU WILL LOSE ROOT.
If you want to stop the OTA update notification, use this file which provides simple edits...but be careful as it may make further updates more difficult >> SCH-I500.DI01 Update
UPDATED:
OTA Update with Root and Busybox >> DH12 to DI01 update with root and busybox
Please post corrections and I will update the OP...I see too many people messing up their devices. Just want to help.
My path.
1) Stock with root mentioned in this dev section
2)restored CW backup
3)used CW to install the update mentioned in this thread.
No problems so far.
After reading this thread again I went to stock and stock kernel. Rooted and gold again.
I think that CPU Scale app causes the Fascinate to shut down, so if you use it and getting them.... remove the app or let me know if you fixed.
Thanks!!!
Now, here is something I didn't try yet. I am still stock (not rooted), ran the OTA...and with all people having issues, I am scared to root. I want to try but I think I will wait and see if anyone else does this.
tats_06 said:
This is going to be simply a collection of links with important points...
>> Rooting Samsung Fascinate
>> Flashing Clockwork Recovery
NOTE 1: IF YOU ARE ROOTED AND WANT TO KEEP ROOT, DO NOT INSTALL VERIZON OTA UPDATE. WAIT FOR DEVELOPERS TO POST A ROOTED UPDATE.
If something went wrong and you did not have recovery installed, use Odin to restore system to stock >> Odin Restore files to get you to stock
If something went wrong, but you are still able to get into clockwork recovery >> Stock Nandroid Image
NOTE 2: IF YOU ARE ROOTED, HAVE LAGFIX AND APPS REMOVED, DO NOT INSTALL VERIZON OTA UPDATE. YOU WILL RUN INTO ISSUES. YOU NEED TO COMPLETELY GO BACK TO STOCK, THEN UPDATE. YOU WILL LOSE ROOT.
If you don't care about root and want to install the OTA update manually >> SCH-I500.DI01 Update
Please post corrections and I will update the OP...I see too many people messing up their devices. Just want to help.
Click to expand...
Click to collapse
I thought the post about doing the OTA manually would allow you to keep root, seeing that it's a stripped down version.
Let me clarify that. If that's the case, I can update the OP.
Restored, updated and Rerooted
All is well. No problems so far.
Guys, pay attention to that update file. It is only updating modem.bin, and then updating your version number so you don't get nagged for an update. There are many more patches/updates in this fix than just modem.bin, and by doing only modem.bin you make it a bit more difficult on yourself to update down the road.
If that's all you want, go ahead and use it, but in no way did JT intend for this to get distributed as "this is what you should use if you have root" update.
Read before using, that's all I ask.
namebrandon said:
Guys, pay attention to that update file. It is only updating modem.bin, and then updating your version number so you don't get nagged for an update. There are many more patches/updates in this fix than just modem.bin, and by doing only modem.bin you make it a bit more difficult on yourself to update down the road.
If that's all you want, go ahead and use it, but in no way did JT intend for this to get distributed as "this is what you should use if you have root" update.
Read before using, that's all I ask.
Click to expand...
Click to collapse
Thanks for heads up...first post updated.
Bump.... Back to top till this gets stickied!
wasupwithuman said:
Bump.... Back to top till this gets stickied!
Click to expand...
Click to collapse
Thanks! I just reported it too to request for sticky.
Just thought I would menetion that phone is auto updating the software once it is downloaded to phone at night I woke up this morning and just reposed at work when I went to use wireless tether it wouldn't work looked at my phone and realized it had been auto updated time to go back to stock and reroot
Sent from my SCH-I500 using XDA App
azalvarez03 said:
Just thought I would menetion that phone is auto updating the software once it is downloaded to phone at night I woke up this morning and just reposed at work when I went to use wireless tether it wouldn't work looked at my phone and realized it had been auto updated time to go back to stock and reroot
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Do you have to go back to stock first before rooting? Or can you just run the root OVER the update? Thanks.
tats_06 said:
Do you have to go back to stock first before rooting? Or can you just run the root OVER the update? Thanks.
Click to expand...
Click to collapse
I don't think the update blocks root. you should be able to install the OTA as long as your not rooted, then once it is installed go ahead and root your device.
Ok...looks like root went thru...working on cwm recovery now.
OK, recovery installed successfully...running a backup right now.
Should I test restoring? Or should I assume I am safe?
Rooting after OTA update.
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
lukaro said:
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
Click to expand...
Click to collapse
If you have CWM installed, you always have root via adb, which means you can get your root apps working.
If you're not running CWM, I don't know. Someone who's tried rage.bin post-update could tell you.
lukaro said:
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
Click to expand...
Click to collapse
Yes you can root after update, I did it fine, but had to attempt it twice, the first try it hung, so had to do a battery pull, and then the second time it worked fine.
Nothing in the update seems worth it to return to stock (I've removed so many stock apps already.)
I'm having the Force Close loop issue. My CWR seems to be missing, as all I can access is Android system recovery <2e> with the options of:
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
Using the Odin method didn't work for me, on multiple tries. My SD card appears to be wiped clean and I can't enter debug mode.
Is there anything short of a miracle that I can do to fix my phone? I've seen a few posts with people saying they had similar problems as mine, but there was never and explanation of how or if they fixed there phone.
Thanks in advance
Help.
I have a rooted Thunderbolt and I have been able to reject the update from Verizon until this afternoon when my phone started to update on its own. The update didn't go through and I got an error icon. Now my phone just goes through the same cycle of turning it self off and trying to update and crashing.
I am able to get to the Clockwork Mod recovery page but the only option that works is the 'reboot system now', which starts the phone and the whole cycle of trying to update is started.
Does anyone have an idea of how to get my phone working again?
Thanks in advance.
Mike
I'm really sorry to hear that happened, I'm not sure what you can do. Hopefully someone will be able to help you out. But at least I can tell you that you are not alone! I wasn't rooted, but my phone did autoupdate on its own at about 2:30pm today.
I posted about it here: http://forum.xda-developers.com/showthread.php?t=1234844
Pull your SDcard, wipe the pg05img.zip file, and try again. You might have to reflash clockwork.
This is the problem with running rooted stock ROMs. I know flashing a new ROM isn't what a noob wants to do, but it will avoid these very confusing headaches.
whats if you rooted using revolutionary? As far as i know there wont be that pg05img.zip file to delete.
Would you always be in danger is this if you are rooted and stay stock?
Why would someone want to root their phone and stay stock ??????
Sent from my Verizon LTE 4G Thunderbolt
loonatik78 said:
This is the problem with running rooted stock ROMs
Click to expand...
Click to collapse
Nope. One only has to keep up with the current releases, rooted versions of which come out within days of official release.
Are you sure it is the Verizon update?
I have the same behavior on my T-bolt since about 10 pst today. However, just before the phone shuts down to reboot, I see a note about a new version of Clockworkmod Recovery 4.0.1.5.
So I have been working on the assumption that it is CWM Recovery that is doing an automatic update.
I also am running rooted stock, and have not updated to latest release.
OK, it isn't the update to CWM Recovery that is the problem; it is the Verizon OTA update, which they have figured out how to force on us. I fixed my phone using the solution given by Mike later in this thread.
jbh00jh said:
Why would someone want to root their phone and stay stock ??????
Sent from my Verizon LTE 4G Thunderbolt
Click to expand...
Click to collapse
Debloating. Stock is pretty damn nice without all the extra crap.
*Madmoose* said:
Debloating. Stock is pretty damn nice without all the extra crap.
Click to expand...
Click to collapse
This, plus "root while you can" - there's no guarantee that rooting will be possible with each subsequent (unrooted) release, but you can root now and stay rooted to keep your options open. Also, getting full backups of everything is easier when rooted.
Did the fix work?
Mike, did you try what loonatik suggested? Did it work? Waiting breathlessly...
Unless I am misunderstanding the problem wiping cache from Clockwork recovery should clear out the update and it will quit trying to install it. For the future if you go to settings in the about phone or software update section (dont remeber which) there is an option to de-select scheduled update checks.
Sent from my HTC Thunderbolt
Wait.. what? Most ROMs I've seen are debloated.. At the very least they have VZW crap removed
Thanks guys for all your help and interest. I tried the solution offered by lunatic but it did not work. Thanks any way I was still looping through continuous on and off cycle. I did however did find a solution on another site. Here is the solution from Sele.
http://www.thunderboltforums.com/forum/htc-thundebolt-hacking-guides/2257-rs-guide-how-get-rid-ota-forced-reboots-rooted-phone.html
It was easier fix than I thought it would be. Step #1 worked.
I also did this to stop the update from happening again.
"If you are rooted use root explorer or super manager and set system to R/W. Then navigate to /system/etc/security. Find the file named otacerts.zip and rename it to otacerts.zip.bak and reboot. Should fix you up."
I'm sorry I can't remember who offered this solution to give credit to. I haven't had any updates yet but only time will tell.
Good Luck with your phone.
JBO1018 said:
Unless I am misunderstanding the problem wiping cache from Clockwork recovery should clear out the update and it will quit trying to install it. For the future if you go to settings in the about phone or software update section (dont remeber which) there is an option to de-select scheduled update checks.
Sent from my HTC Thunderbolt
Click to expand...
Click to collapse
Yes you are correct wiping the cache fixed the problem.
mjkusa said:
Thanks guys for all your help and interest. I tried the solution offered by lunatic but it did not work. Thanks any way I was still looping through continuous on and off cycle. I did however did find a solution on another site. Here is the solution from Sele.
http://www.thunderboltforums.com/forum/htc-thundebolt-hacking-guides/2257-rs-guide-how-get-rid-ota-forced-reboots-rooted-phone.html
It was easier fix than I thought it would be. Step #1 worked.
I also did this to stop the update from happening again.
"If you are rooted use root explorer or super manager and set system to R/W. Then navigate to /system/etc/security. Find the file named otacerts.zip and rename it to otacerts.zip.bak and reboot. Should fix you up."
I'm sorry I can't remember who offered this solution to give credit to. I haven't had any updates yet but only time will tell.
Good Luck with your phone.
Click to expand...
Click to collapse
Definitely a handy resource.. Every time a new OTA comes out, this is a very frequently asked question.
I suppose you could always use an RUU too
mike.s said:
Nope. One only has to keep up with the current releases, rooted versions of which come out within days of official release.
Click to expand...
Click to collapse
Based on how many of these threads I see, that clearly isn't what's being done.
Help.
So, my boss asks me to root his thunderbolt, so I do. Then, he goes and tries to install an OTA update on the thunderbolt and wonders why it won't work. I get into work this morning and he says, "I need you to unroot my phone so I can install OTA updates"???
I'm very confused, but hey, he wants it unrooted. Problem is, I can pull the battery, startup like normal, boot into the rooted OS and immediately the thing shuts down and tries to install the OTA update he installed.
This results in the android guy and the triangle with an exclamation point in it showing and I can't go any further.
ADB DOES see the device when I do adb devices.
How do I push the stock ROM back on to the phone and have it update that back to stock?
Help.
WHY he wants the phone unrooted or even decided to update it with an OTA ROM is beyond me.
Please and thank you in advance.
Wrong section but if the bootloader still has s-off, I would install custom recovery again and flash the rooted ota rom.
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=1009423
You should be able to flash the latest ota by booting into bootloader. If adb is working then I believe you can...
adb reboot bootloader
here is a link to the file you will need with instructions...
how to flash the latest ota
1. I realized too late it was the wrong section, apologies.
2. I don't need to flash a ROOTED ROM, he wants this device back to being stock UNROOTED.
Can I, using recovery, flash PG05IMG_MR1_no_hboot.zip over what is there now and go back to unroot and stock?
I use an Evo and can do almost anything on that, but the thunderbolt is a little new to me. Not my device, shouldn't have offered to root it for my boss without knowing he was going to try to install an OTA update.
Any help with unrooting and reflashing the Stock OTA would be very helpful.
It's one of the big issues with running stock rooted. Nothing stopping it from trying to update itself and screw the pooch
Honestly, if he wants OTAs just for the latest goodies/stability and battery improvements he'd be better off with something cooked... Just my opinion though
Sent from my ADR6400L using XDA App
sanjsrik said:
2. I don't need to flash a ROOTED ROM, he wants this device back to being stock UNROOTED.
Any help with unrooting and reflashing the Stock OTA would be very helpful.
Click to expand...
Click to collapse
Hmmm - not sure why you didn't just use the link that I provided? I will quote from there...
Code:
Using this RUU will wipe all data on your device!
Please make a backup of all sensitive data before
proceeding. Similarly, you will [B]LOOSE ROOT IF
YOU FLASH THIS[/B]. It is unclear right now
whether or not this version is easily rootable.
[B]PROCEED WITH CAUTION[/B]
This is not a link to a rooted rom.
thepolishguy said:
Hmmm - not sure why you didn't just use the link that I provided? I will quote from there...
Code:
Using this RUU will wipe all data on your device!
Please make a backup of all sensitive data before
proceeding. Similarly, you will [B]LOOSE ROOT IF
YOU FLASH THIS[/B]. It is unclear right now
whether or not this version is easily rootable.
[B]PROCEED WITH CAUTION[/B]
This is not a link to a rooted rom. It is a link to the full unrooted ota ruu that has been put in a flashable (from hboot) PG05IMG.zip.
Click to expand...
Click to collapse
Update: Worked like a charm.
Thanks, polishguy, that wasn't clear originally, will follow your link. Much appreciated.
sanjsrik said:
Thanks, polishguy, that wasn't clear originally, will follow your link. Much appreciated.
Click to expand...
Click to collapse
No problem. It wasn't clear originally bc I am not sure how XDA views links to "this sort of file". As in a "Romeo Uniform Uniform"
thepolishguy said:
No problem. It wasn't clear originally bc I am not sure how XDA views links to "this sort of file". As in a "Romeo Uniform Uniform"
Click to expand...
Click to collapse
I would guess it's fine considering there are an abundance of RUU links in the dev section.
I have the sprint EVO3D. I unlocked it and its rooted, but at the moment I'm still running the stock image. I keep trying to install the latest OTA update from HTC (the one that removes CarrierIQ) but it keeps failing to install...no message, no error, essentially the phone just reboots when I tell it to install the update.
Does it have something to do with CWM being flashed for recovery? I'd like to have CarrierIQ removed. Is there a way around this that anyone knows of?
I had CM7 and MIUI installed at one point, but I wanted the 3D camera that I don't get with either of those.
DarkNemesis618 said:
I have the sprint EVO3D. I unlocked it and its rooted, but at the moment I'm still running the stock image. I keep trying to install the latest OTA update from HTC (the one that removes CarrierIQ) but it keeps failing to install...no message, no error, essentially the phone just reboots when I tell it to install the update.
Does it have something to do with CWM being flashed for recovery? I'd like to have CarrierIQ removed. Is there a way around this that anyone knows of?
I had CM7 and MIUI installed at one point, but I wanted the 3D camera that I don't get with either of those.
Click to expand...
Click to collapse
If you're running into issues applying an OTA while on a rooted ROM, my first suggestion would be to suggest you grab a rooted stock ROM which already contains the OTA.
The steps to installing an OTA are fairly simple, but if done improperly whether due to lack of following directions or any other myraid of reasons, COULD damage the device or at least set the user back a few hours.
In order to process an OTA with 100% certainity, the stock recovery should be loaded. Manufacturers ARE able to add and use edify scripting language which could only be interperted and executed probably by a stock recovery image as they are not required to release the source code to their recovery image.
With that said and no mention of htc official unlock or revolutionary unlock, the process I would take on my own personal EVO 3D which would be unlocked with revolutionary is as follows:
1) Flash stock recovery image from most recent RUU via Flash Image GUI while in normal android mode.
2) Accept OTA and allow to fully process.
3) Flash custom recovery back using a PG86IMG.zip file.
4) Boot into custom recovery and via adb shell chmod 4755 /system/bin/su.
5) Reboot and everything should be set.
Another word of caution will be at step 2 to understand this will remove root access by removing the setuid flag on the /system/bin/su binary. This will be restored by step 4.
These steps might have to be tailored/changed for an HTC unlock device. Probably step 3 can be replaced by the fastboot flash recovery c:\recovery.img command.
Hope that helps!
Yes, it is because of CWM. You need the stock recovery to update officially.
Where would I download the stock recovery? I tried googling for it, but wasn't getting any straight answer that I could understand...
http://forum.xda-developers.com/showthread.php?p=22554153#post22554153
There you go
Just download a stock rooted rom zip and flash it. Much easier, and much less hassle than trying to go back to the stock recovery.
Thanks everyone, got stock recovery flashed and update is installed...now to get my apps reinstalled
sitlet said:
Just download a stock rooted rom zip and flash it. Much easier, and much less hassle than trying to go back to the stock recovery.
Click to expand...
Click to collapse
I agree, but the man wanted the stock recovery, so the stock recovery is what he got lol
DarkNemesis618 said:
Thanks everyone, got stock recovery flashed and update is installed...now to get my apps reinstalled
Click to expand...
Click to collapse
Glad it all worked!
If anyone is interested, I saw this posted today. A small OTA update released by AT&T today.
http://www.androidcentral.com/att-pushes-out-update-htc-one-m8-brings-android-444-and-hd-voice
scott500 said:
If anyone is interested, I saw this posted today. A small OTA update released by AT&T today.
http://www.androidcentral.com/att-pushes-out-update-htc-one-m8-brings-android-444-and-hd-voice
Click to expand...
Click to collapse
This is merely a rumor. The ATT link is to the old May 2014 update.
Pay no attention.
The link to the att sight yes is for old 1.58 build, does not mean there isnt an update coming...as its being reported with a build number by more and more sights, could just be a rumour but it could also be rolling out.
Well, they finally released the update today. Finally have 4.4.4. On my m8. Now to wait for lollipop
Does anybody know where the OTAPkg file gets downloaded to? I'm trying to preserve the file and not have to download it again and again after a fail update. Thanks.
Edit: n/m found it, it's under the FUMO folder within the internal SD.
Please save a copy. We need it for a custom rom
Sent from my HTC One_M8 using XDA Free mobile app
johnnyutah22 said:
Please save a copy. We need it for a custom rom
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
I'm lost. I installed the 4.4.4 OTA, installed the latest CM12 nightly, and now I have no cell service nor options to select/enter an apn. Under apn it states "access point names not available for this user" HElP?!
ALSO, what custom roms can I run using this 4.4.4 OTA?!
bford152 said:
I'm lost. I installed the 4.4.4 OTA, installed the latest CM12 nightly, and now I have no cell service nor options to select/enter an apn. Under apn it states "access point names not available for this user" HElP?!
ALSO, what custom roms can I run using this 4.4.4 OTA?!
Click to expand...
Click to collapse
I can't help you with CM12, but I just installed Viper One and it seems to work fine.
I updated to the 4.4.4 via OTA yesterday, and Viper installed without a hitch.
NB: Make a Nandroid Backup before flashing please.
Whats the best way to update my girlfriend's rooted M8? Currently running 4.4.2 rooted S-ON. Can she just take OTA and then will have to re-root?
I'm S-OFF on my phone so I haven't had to deal with this. Already updated my firmware months ago and have been running 4.4.4 roms.
Thanks!!
Downloading it now.
You'll have to re-flash stock recovery, take the OTA update, then restore twrp (or other custom recovery) and re-root.
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Also is there anyway to flash twrp without using a pc? I tried flashify but it doesn't seem to be working cause it would revert back to the fastboot no matter what.
Same situation here I think... stock rom (never changed it yet), rooted, unlocked, s-off. Downloaded OTA then realized I needed to flash original recovery back. Did that, now AT&T sw update is of course telling me to wait 24 hours to check again. Any way around that?
jeremyenos said:
Same situation here I think... stock rom (never changed it yet), rooted, unlocked, s-off. Downloaded OTA then realized I needed to flash original recovery back. Did that, now AT&T sw update is of course telling me to wait 24 hours to check again. Any way around that?
Click to expand...
Click to collapse
Yeah just manually change the date one day ahead and try it again. It might take a couple of secs for it to prompt that there is an update.
I just posted a pre-rooted ruu in the dev section.
Backup data in twrp to your ext sd. Flash ruu via sd card method. Flash twrp using the free app flashify. Reboot to twrp and restore data.
No pc required.
Just make sure you backup files on internal.
volcalstone said:
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Also is there anyway to flash twrp without using a pc? I tried flashify but it doesn't seem to be working cause it would revert back to the fastboot no matter what.
Click to expand...
Click to collapse
There's a boot loader flashable twrp in the dev section posted by jball
dottat said:
I just posted a pre-rooted ruu in the dev section.
Backup data in twrp to your ext sd. Flash ruu via sd card method. Flash twrp using the free app flashify. Reboot to twrp and restore data.
No pc required.
Just make sure you backup files on internal.
Click to expand...
Click to collapse
I noticed that flashify also will install CWM or Philz. Is your method specific to TWRP or can you use the others. The reason I ask is because I currently use Philz and would need that to restore my backup.
johnnyutah22 said:
I noticed that flashify also will install CWM or Philz. Is your method specific to TWRP or can you use the others. The reason I ask is because I currently use Philz and would need that to restore my backup.
Click to expand...
Click to collapse
You can flash whichever you use.
I thought I read where this update would include the EYE Experience. Did I read that wrong or do I just not know how to use my camera anymore?
volcalstone said:
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Click to expand...
Click to collapse
I don't think root changes are the issue; as typically it will fail before it even goes into recovery with a message that the system has been modified. It might just be a bad download.
Setting up your phone again is really not that bad a proposition; especially if you use Titanium to restore apps. And it will also restore your Xposed installer and modules. Using Titanium, I can easily be up and fully configured again in about a half hour after a factory reset or RUU. Although, of course this will depend on the amount of customization in settings, etc.
You might consider updating with the new RUU (relocking bootloader required if s-on). Not only will this bypass the OTA install issue you are having, but makes for a cleaner install. Yes, you will have to set the phone up again; and you will also need to backup any data on internal storage, as it will be wiped by RUU.