If anyone is interested, I saw this posted today. A small OTA update released by AT&T today.
http://www.androidcentral.com/att-pushes-out-update-htc-one-m8-brings-android-444-and-hd-voice
scott500 said:
If anyone is interested, I saw this posted today. A small OTA update released by AT&T today.
http://www.androidcentral.com/att-pushes-out-update-htc-one-m8-brings-android-444-and-hd-voice
Click to expand...
Click to collapse
This is merely a rumor. The ATT link is to the old May 2014 update.
Pay no attention.
The link to the att sight yes is for old 1.58 build, does not mean there isnt an update coming...as its being reported with a build number by more and more sights, could just be a rumour but it could also be rolling out.
Well, they finally released the update today. Finally have 4.4.4. On my m8. Now to wait for lollipop
Does anybody know where the OTAPkg file gets downloaded to? I'm trying to preserve the file and not have to download it again and again after a fail update. Thanks.
Edit: n/m found it, it's under the FUMO folder within the internal SD.
Please save a copy. We need it for a custom rom
Sent from my HTC One_M8 using XDA Free mobile app
johnnyutah22 said:
Please save a copy. We need it for a custom rom
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
I'm lost. I installed the 4.4.4 OTA, installed the latest CM12 nightly, and now I have no cell service nor options to select/enter an apn. Under apn it states "access point names not available for this user" HElP?!
ALSO, what custom roms can I run using this 4.4.4 OTA?!
bford152 said:
I'm lost. I installed the 4.4.4 OTA, installed the latest CM12 nightly, and now I have no cell service nor options to select/enter an apn. Under apn it states "access point names not available for this user" HElP?!
ALSO, what custom roms can I run using this 4.4.4 OTA?!
Click to expand...
Click to collapse
I can't help you with CM12, but I just installed Viper One and it seems to work fine.
I updated to the 4.4.4 via OTA yesterday, and Viper installed without a hitch.
NB: Make a Nandroid Backup before flashing please.
Whats the best way to update my girlfriend's rooted M8? Currently running 4.4.2 rooted S-ON. Can she just take OTA and then will have to re-root?
I'm S-OFF on my phone so I haven't had to deal with this. Already updated my firmware months ago and have been running 4.4.4 roms.
Thanks!!
Downloading it now.
You'll have to re-flash stock recovery, take the OTA update, then restore twrp (or other custom recovery) and re-root.
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Also is there anyway to flash twrp without using a pc? I tried flashify but it doesn't seem to be working cause it would revert back to the fastboot no matter what.
Same situation here I think... stock rom (never changed it yet), rooted, unlocked, s-off. Downloaded OTA then realized I needed to flash original recovery back. Did that, now AT&T sw update is of course telling me to wait 24 hours to check again. Any way around that?
jeremyenos said:
Same situation here I think... stock rom (never changed it yet), rooted, unlocked, s-off. Downloaded OTA then realized I needed to flash original recovery back. Did that, now AT&T sw update is of course telling me to wait 24 hours to check again. Any way around that?
Click to expand...
Click to collapse
Yeah just manually change the date one day ahead and try it again. It might take a couple of secs for it to prompt that there is an update.
I just posted a pre-rooted ruu in the dev section.
Backup data in twrp to your ext sd. Flash ruu via sd card method. Flash twrp using the free app flashify. Reboot to twrp and restore data.
No pc required.
Just make sure you backup files on internal.
volcalstone said:
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Also is there anyway to flash twrp without using a pc? I tried flashify but it doesn't seem to be working cause it would revert back to the fastboot no matter what.
Click to expand...
Click to collapse
There's a boot loader flashable twrp in the dev section posted by jball
dottat said:
I just posted a pre-rooted ruu in the dev section.
Backup data in twrp to your ext sd. Flash ruu via sd card method. Flash twrp using the free app flashify. Reboot to twrp and restore data.
No pc required.
Just make sure you backup files on internal.
Click to expand...
Click to collapse
I noticed that flashify also will install CWM or Philz. Is your method specific to TWRP or can you use the others. The reason I ask is because I currently use Philz and would need that to restore my backup.
johnnyutah22 said:
I noticed that flashify also will install CWM or Philz. Is your method specific to TWRP or can you use the others. The reason I ask is because I currently use Philz and would need that to restore my backup.
Click to expand...
Click to collapse
You can flash whichever you use.
I thought I read where this update would include the EYE Experience. Did I read that wrong or do I just not know how to use my camera anymore?
volcalstone said:
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Click to expand...
Click to collapse
I don't think root changes are the issue; as typically it will fail before it even goes into recovery with a message that the system has been modified. It might just be a bad download.
Setting up your phone again is really not that bad a proposition; especially if you use Titanium to restore apps. And it will also restore your Xposed installer and modules. Using Titanium, I can easily be up and fully configured again in about a half hour after a factory reset or RUU. Although, of course this will depend on the amount of customization in settings, etc.
You might consider updating with the new RUU (relocking bootloader required if s-on). Not only will this bypass the OTA install issue you are having, but makes for a cleaner install. Yes, you will have to set the phone up again; and you will also need to backup any data on internal storage, as it will be wiped by RUU.
Related
This is going to be simply a collection of links with important points...Please read ALL directions and comments carefully...as no one is responsible for any damage to your phone.
NOTE 1: IF YOU ARE UNROOTED AND ALREADY UPDATED WITH OTA, YOU CAN STILL USE THE PROCESSES BELOW TO ROOT AND FLASH RECOVERY.
>> Rooting Samsung Fascinate
>> Flashing Clockwork Recovery
NOTE 2: IF YOU ARE ROOTED AND WANT TO KEEP ROOT, DO NOT INSTALL VERIZON OTA UPDATE. WAIT FOR DEVELOPERS TO POST A ROOTED UPDATE.
If something went wrong and you did not have recovery installed, use Odin to restore system to stock >> Odin Restore files to get you to stock
If something went wrong, but you are still able to get into clockwork recovery >> Stock Nandroid Image
NOTE 3: IF YOU ARE ROOTED, HAVE LAGFIX AND APPS REMOVED, DO NOT INSTALL VERIZON OTA UPDATE. YOU WILL RUN INTO ISSUES. YOU NEED TO COMPLETELY GO BACK TO STOCK, THEN UPDATE. YOU WILL LOSE ROOT.
If you want to stop the OTA update notification, use this file which provides simple edits...but be careful as it may make further updates more difficult >> SCH-I500.DI01 Update
UPDATED:
OTA Update with Root and Busybox >> DH12 to DI01 update with root and busybox
Please post corrections and I will update the OP...I see too many people messing up their devices. Just want to help.
My path.
1) Stock with root mentioned in this dev section
2)restored CW backup
3)used CW to install the update mentioned in this thread.
No problems so far.
After reading this thread again I went to stock and stock kernel. Rooted and gold again.
I think that CPU Scale app causes the Fascinate to shut down, so if you use it and getting them.... remove the app or let me know if you fixed.
Thanks!!!
Now, here is something I didn't try yet. I am still stock (not rooted), ran the OTA...and with all people having issues, I am scared to root. I want to try but I think I will wait and see if anyone else does this.
tats_06 said:
This is going to be simply a collection of links with important points...
>> Rooting Samsung Fascinate
>> Flashing Clockwork Recovery
NOTE 1: IF YOU ARE ROOTED AND WANT TO KEEP ROOT, DO NOT INSTALL VERIZON OTA UPDATE. WAIT FOR DEVELOPERS TO POST A ROOTED UPDATE.
If something went wrong and you did not have recovery installed, use Odin to restore system to stock >> Odin Restore files to get you to stock
If something went wrong, but you are still able to get into clockwork recovery >> Stock Nandroid Image
NOTE 2: IF YOU ARE ROOTED, HAVE LAGFIX AND APPS REMOVED, DO NOT INSTALL VERIZON OTA UPDATE. YOU WILL RUN INTO ISSUES. YOU NEED TO COMPLETELY GO BACK TO STOCK, THEN UPDATE. YOU WILL LOSE ROOT.
If you don't care about root and want to install the OTA update manually >> SCH-I500.DI01 Update
Please post corrections and I will update the OP...I see too many people messing up their devices. Just want to help.
Click to expand...
Click to collapse
I thought the post about doing the OTA manually would allow you to keep root, seeing that it's a stripped down version.
Let me clarify that. If that's the case, I can update the OP.
Restored, updated and Rerooted
All is well. No problems so far.
Guys, pay attention to that update file. It is only updating modem.bin, and then updating your version number so you don't get nagged for an update. There are many more patches/updates in this fix than just modem.bin, and by doing only modem.bin you make it a bit more difficult on yourself to update down the road.
If that's all you want, go ahead and use it, but in no way did JT intend for this to get distributed as "this is what you should use if you have root" update.
Read before using, that's all I ask.
namebrandon said:
Guys, pay attention to that update file. It is only updating modem.bin, and then updating your version number so you don't get nagged for an update. There are many more patches/updates in this fix than just modem.bin, and by doing only modem.bin you make it a bit more difficult on yourself to update down the road.
If that's all you want, go ahead and use it, but in no way did JT intend for this to get distributed as "this is what you should use if you have root" update.
Read before using, that's all I ask.
Click to expand...
Click to collapse
Thanks for heads up...first post updated.
Bump.... Back to top till this gets stickied!
wasupwithuman said:
Bump.... Back to top till this gets stickied!
Click to expand...
Click to collapse
Thanks! I just reported it too to request for sticky.
Just thought I would menetion that phone is auto updating the software once it is downloaded to phone at night I woke up this morning and just reposed at work when I went to use wireless tether it wouldn't work looked at my phone and realized it had been auto updated time to go back to stock and reroot
Sent from my SCH-I500 using XDA App
azalvarez03 said:
Just thought I would menetion that phone is auto updating the software once it is downloaded to phone at night I woke up this morning and just reposed at work when I went to use wireless tether it wouldn't work looked at my phone and realized it had been auto updated time to go back to stock and reroot
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Do you have to go back to stock first before rooting? Or can you just run the root OVER the update? Thanks.
tats_06 said:
Do you have to go back to stock first before rooting? Or can you just run the root OVER the update? Thanks.
Click to expand...
Click to collapse
I don't think the update blocks root. you should be able to install the OTA as long as your not rooted, then once it is installed go ahead and root your device.
Ok...looks like root went thru...working on cwm recovery now.
OK, recovery installed successfully...running a backup right now.
Should I test restoring? Or should I assume I am safe?
Rooting after OTA update.
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
lukaro said:
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
Click to expand...
Click to collapse
If you have CWM installed, you always have root via adb, which means you can get your root apps working.
If you're not running CWM, I don't know. Someone who's tried rage.bin post-update could tell you.
lukaro said:
Can someone give a diffinative answer please. Can we root after the OTA update or does the update block root?
Click to expand...
Click to collapse
Yes you can root after update, I did it fine, but had to attempt it twice, the first try it hung, so had to do a battery pull, and then the second time it worked fine.
Nothing in the update seems worth it to return to stock (I've removed so many stock apps already.)
I'm having the Force Close loop issue. My CWR seems to be missing, as all I can access is Android system recovery <2e> with the options of:
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
Using the Odin method didn't work for me, on multiple tries. My SD card appears to be wiped clean and I can't enter debug mode.
Is there anything short of a miracle that I can do to fix my phone? I've seen a few posts with people saying they had similar problems as mine, but there was never and explanation of how or if they fixed there phone.
Thanks in advance
I have a rooted Amaze with just some bloatware removed. Yesterday I received a notification in the status bar that a system update was available. When I try to run the update the phone reboots and then freezes with a big green X on the screen. Doesn't look like something official. Has anyone seen this before or know what it's about? I'm thinking maybe it's just failing to run the update because of being rooted or a related issue but can't find any info on Google about the green X.
I finally pulled the battery out because it wouldn't respond and then turned the phone on again. It booted fine and I still have the notice about the update. I'm reluctant to try again until I find out what's going on. Thanks.
I don't think you're able to install an update through a custom recovery..There should be a ROM with that update already in it.
If you have a Custom ROM you can't take the update that is intended for stock unrooted ROMS.
Sent from my HTC Amaze 4G using xda premium
Thanks for the feedback. I don't have a custom rom - just the stock minus some bloat. I can see how the custom recovery, however, might interfere.
I can't find any info on the update and what it includes or why I might want/need it but assuming it would be good to install then is there an easy way to remove the custom recovery? Would running the stock update.zip do this or do I need to go through the full un-root process?
If you have CWM recovery already,
1. Go to /downloads folder inside the internal Storage. You can find the OTA.
2. Rename it to "update.zip" and copy to External SD.
3. Reboot the device to recovery.
4. Select update.zip and update manually.
5. After update & reboot, delete both original files to get rid of notification.
Thanks for the directions. Tried and got this error
Code:
verifying current system...
assert failed: apply_patch_check("/system/app/FriendStream.odex", "some very long hex number", "some other long hex number")
E:Error in /sdcard/update.zip
(stage 7)
Installation aborted.
droidux said:
Thanks for the directions. Tried and got this error
Code:
verifying current system...
assert failed: apply_patch_check("/system/app/FriendStream.odex", "some very long hex number", "some other long hex number")
E:Error in /sdcard/update.zip
(stage 7)
Installation aborted.
Click to expand...
Click to collapse
Seems its not possible as you have removed some programs
Think you removed friendstream also.
It seems to work only if the ROM is unmodded
skr_xd said:
Seems its not possible as you have removed some programs
Think you removed friendstream also.
It seems to work only if the ROM is unmodded
Click to expand...
Click to collapse
Yes, I removed facebook and friendstream. Not sure why those would be necessary to run a system update but you may be right about not being able to update a modified phone. Maybe the update isn't anything I need anyway if it wants to update an app I don't want.
Thanks for the help.
In case anyone has a similar issue, here is what I've figured out.
The update won't run on a modified system - even if it's a stock, but changed, rom. In the interest of exploration, I restored my backup using clockwork and then ran the update. It still didn't work, but following skr_xd's advice above I was able to run the update manually. The result was a more or less stock phone without root but with the most current software. I then re-rooted the phone and re-removed all the bloat with no apparent ill effects.
Thanks for the help.
Btw, I didn't know what the green X was all about, but I think it's related to clockwork mod. Could be wrong though.
droidux said:
In case anyone has a similar issue, here is what I've figured out.
The update won't run on a modified system - even if it's a stock, but changed, rom. In the interest of exploration, I restored my backup using clockwork and then ran the update. It still didn't work, but following skr_xd's advice above I was able to run the update manually. The result was a more or less stock phone without root but with the most current software. I then re-rooted the phone and re-removed all the bloat with no apparent ill effects.
Thanks for the help.
Btw, I didn't know what the green X was all about, but I think it's related to clockwork mod. Could be wrong though.
Click to expand...
Click to collapse
yes its the custom clockworkmod i made
xboarder56 said:
yes its the custom clockworkmod i made
Click to expand...
Click to collapse
Thanks for the confirmation and awesome software. I noticed there is work on version 5.0.2.7. Assuming it would be wise to update once released.
Same issue here. I have stock rom without any bloatware removal.
I just unlocked the bootloader than installed CWM and rooted the phone.
when I try to update phone OTA it stucks in splash screen (With Big Green X logo)
Flash prerooted rom you good to go
Sent from my HTC Amaze 4G using xda premium
I just spent abut 4 hours trying t figure this out...
This is my journey..
Relock bootloader
Flash one of the stock tmobile ruby rom in development section
Did the OTA update on stock
Unlocked my bootloader again
Then i tried to root using one click zerg method but it didnt work
So i flashed clockwork mod using fast boot
Then applied a su binary update i found in the development section.
In less than a minute i got root back.
Then i restored my data from nandroid backup.
My phone is pretty much rooted, bootloader unlocked, bloatware free alongside having the ota update that enabled wifi calling installed.
You don't need to relock your phone to do the update. If you do xboarder's recover to stock method just skip the relock part you can update your phone. So far going back to stock is the only way to get the radio updated as well which I am noticing way better 4g coverage than before!
bmbrad said:
You don't need to relock your phone to do the update. If you do xboarder's recover to stock method just skip the relock part you can update your phone. So far going back to stock is the only way to get the radio updated as well which I am noticing way better 4g coverage than before!
Click to expand...
Click to collapse
working on a way maybe this weekend will have it ready
xboarder56 said:
working on a way maybe this weekend will have it ready
Click to expand...
Click to collapse
NICE! Dude you must never sleep! Always the first to get something done!
I figured out what to do. You just need to rename this update file to update.zip. then reboot in recovery and choose install update from sd card. Next navigate to download folder and install update.zip file. You will be updated and stay rooted at the same time.
This worked for you because you didn't remove any of the t-mobile bloatware from your phone.. This will not work for people who messed with the pre-installed bloatware.
darll said:
This worked for you because you didn't remove any of the t-mobile bloatware from your phone.. This will not work for people who messed with the pre-installed bloatware.
Click to expand...
Click to collapse
Maybe, but 8m I've got another problem after updating this way. Wifi doesn't work anymore. I receive an error while trying to switch on wifi.
Just got to know that Pantech has released the much awaited Jelly Bean 4.1 for the Flex through OTA AT&T software update.
Like many others, I'm using the flex outside US, therefore, cannot update my flex.
Would request someone to upload the OTA JB zip file.
Can't wait to see Jelly Bean on the Flex.
PS: Check out the Pantech website for this great news
This is good news. I wish I wasn't rooted with CWMR so I could get this. Tried flashing stock recovery.img and boot.img files but get NOT SUPPORT.
Anyone know a way to get this phone back to complete stock so we can get the Jell Bean goodness?
I managed to unroot and restore stock recovery.
Got prompted for the update, it downloaded and installed fine!
This little Flex seems quite a bit better with Jelly Bean. Wish it had been 4.2 but 4.1 is fine.
Tersanyus said:
I managed to unroot and restore stock recovery.
Got prompted for the update, it downloaded and installed fine!
This little Flex seems quite a bit better with Jelly Bean. Wish it had been 4.2 but 4.1 is fine.
Click to expand...
Click to collapse
Can you upload the update file?
How did you unroot?
Sent from my PantechP8010 using xda app-developers app
Not rooted anymore so probably can't get the update file. It was like 264MB or something.
Not planning to root this phone again.
Interesting that the Pantech diag menu shows still rooted and tampered, it's definitely not rooted.
It should be 100% stock.
If you know of a way to get the file off the phone I can look for it.
---------- Post added at 01:09 PM ---------- Previous post was at 12:52 PM ----------
I knew from experience I had to go to stock recovery and unroot to update.
I flashed a stock rooted nandroid backup I had made after rooting initially.
To unroot I think I went into the SuperUser app and choose option to unroot.
Stock recovery file is posted in a thread here somewhere, had recovery.img and boot.img.
Tried flashing those in fastboot but only got NOT SUPPORT mesage.
I took a flashable zip file that had CWM recovery.img file in it and replaced it with the stock recovery.img and flashed it in CWM.
Once stock recovery was on the phone when I tried to use it I only got a little android symbol lying on its back with a red exclamation point.
Phone booted fine and worked ok
Couldn't get it to see the AT&T update until this morning.
Things I have noticed in this new Jelly Bean build for our little Flex:
Of the stock AT&T apps only 3 I could disable (ugh), why no Disable button
good news
Tersanyus said:
Not rooted anymore so probably can't get the update file. It was like 264MB or something.
Not planning to root this phone again.
Interesting that the Pantech diag menu shows still rooted and tampered, it's definitely not rooted.
It should be 100% stock.
If you know of a way to get the file off the phone I can look for it.
Click to expand...
Click to collapse
Basically you will find the update in the /cache folder.
I'm not sure if you you can access this folder without being rooted. You can give it a try using the ES File Explorer.
Let me know if you get the update.
ES File Manager did see the cache folder and all the other system folders. It was empty. I'm sorry, I factory reset the phone last night from stock recovery since it was not updating built in apps properly. Never seen stock recovery on this phone before. It has an option for root. I selected it. Downloaded a few root checker apps, not rooted.
I'm sorry if I hadn't reset it last night I might have found the file. I'm sure it will turn up somewhere. This little Flex doesn't have much in the way of development but someone here at XDA will get it sooner or later.
Tersanyus said:
ES File Manager did see the cache folder and all the other system folders. It was empty. I'm sorry, I factory reset the phone last night from stock recovery since it was not updating built in apps properly. Never seen stock recovery on this phone before. It has an option for root. I selected it. Downloaded a few root checker apps, not rooted.
I'm sorry if I hadn't reset it last night I might have found the file. I'm sure it will turn up somewhere. This little Flex doesn't have much in the way of development but someone here at XDA will get it sooner or later.
Click to expand...
Click to collapse
Oh that's bad!
Actually, there's another way. If you can share your system nandroid backup, maybe that can help.
Try Rooting
Tersanyus said:
ES File Manager did see the cache folder and all the other system folders. It was empty. I'm sorry, I factory reset the phone last night from stock recovery since it was not updating built in apps properly. Never seen stock recovery on this phone before. It has an option for root. I selected it. Downloaded a few root checker apps, not rooted.
I'm sorry if I hadn't reset it last night I might have found the file. I'm sure it will turn up somewhere. This little Flex doesn't have much in the way of development but someone here at XDA will get it sooner or later.
Click to expand...
Click to collapse
Why dont you try to root with this method http://forum.xda-developers.com/showthread.php?t=1886460 ,its the same you used to root 4.0.4 I guess, should work, pull out the update and then unroot the phone as you dont want it rooted.
It happened to me, even rooted I wanst able to see /data content with ES File Blablabla, then tried with root explorer and worked fine.
I'm not going to root this Flex. It's not a primary phone for me (never was). It is used as a spare now and can be used by novice users in my family and friends. Don't want them to have a rooted phone. I'd been wanting to get this phone back to complete stock for a while but hasn't really put much effort into it.
When I saw that Pantech released JB for Flex a few days ago that was my motivation to get it back to stock. Frankly I was surprised I was able to get it back to stock and not brick the phone!
I'm uploading the stock rooted rom I have. Luckily I saved that on my computer. It's uploading to Dropbox now so it will take a while.
Thanks for your help
Tersanyus said:
I'm not going to root this Flex. It's not a primary phone for me (never was). It is used as a spare now and can be used by novice users in my family and friends. Don't want them to have a rooted phone. I'd been wanting to get this phone back to complete stock for a while but hasn't really put much effort into it.
When I saw that Pantech released JB for Flex a few days ago that was my motivation to get it back to stock. Frankly I was surprised I was able to get it back to stock and not brick the phone!
I'm uploading the stock rooted rom I have. Luckily I saved that on my computer. It's uploading to Dropbox now so it will take a while.
Click to expand...
Click to collapse
Well, thanks for the file, I'm outside US and even on stock, update notification doesn't prompt.
I got mine back to Stock, but when I hit check for upgrade it says..."Previous session is running. Please Try Later"
I have wiped it several times. any ideas?
Wait...
kneemeister said:
I got mine back to Stock, but when I hit check for upgrade it says..."Previous session is running. Please Try Later"
I have wiped it several times. any ideas?
Click to expand...
Click to collapse
I can see ATT's software updater sucks, we just can wait for our friend's upload.
Here it is: Link removed, Dropbox suspended it.
That should be a stock but rooted rom. Nothing else done to it at all. At least. I had that on the phone for a while as a backup when I was playing with roms for the flex.
Probably only going to leave this link up for a day. I'd make your own nandroid backup first. You'll probably get an md5 error in CWMR but there are instructions for fixing that around. I think it was ADB commands that had to fix it. I know the instructions for clearing the md5 error are in one of the flex rom threads, not that there were many of those. The standard disclaimer applies, if this nandroid backup bricks your phone, I can't help you.
I got the same previous session message too. Then it said no update after wiping. I think the best thing is just wipe and don't check for updates. Leave phone on, wifi on and wait for the phone to check on it's own. I got the prompt in a few hours.
Hope this helps you.
So, need to flash stock recovery after restoring nandroid correct?
Sent from my PantechP8010 using xda app-developers app
Likely if you do not flash stock recovery in CWMR the update will fail. I tried to take the update before flashing stock recovery, it failed each time. I had already unrooted though. Pretty much what I have learned from flashing various phones over the years is that if you are not stock completely any OTA updates from the carrier will fail or soft brick your device.
I think the Flex was one where I had just that issue. There was some AT&T update a few months back, I said to apply it and I got stuck in recovery. Every time I rebooted the phone it just booted to recovery. Found out if I went into the diag screen on the Flex and choose reboot from there I could boot normally. Eventually I figured out I had the wrong boot.img on the phone. Once that was fixed the phone booted fine. But the update never worked.
You can try to take the update with CWMR but I doubt it will work and could brick or soft brick. I've learned to never take an OTA update from the carrier if you are not completely stock.
Still waiting
Tersanyus said:
Likely if you do not flash stock recovery in CWMR the update will fail. I tried to take the update before flashing stock recovery, it failed each time. I had already unrooted though. Pretty much what I have learned from flashing various phones over the years is that if you are not stock completely any OTA updates from the carrier will fail or soft brick your device.
I think the Flex was one where I had just that issue. There was some AT&T update a few months back, I said to apply it and I got stuck in recovery. Every time I rebooted the phone it just booted to recovery. Found out if I went into the diag screen on the Flex and choose reboot from there I could boot normally. Eventually I figured out I had the wrong boot.img on the phone. Once that was fixed the phone booted fine. But the update never worked.
You can try to take the update with CWMR but I doubt it will work and could brick or soft brick. I've learned to never take an OTA update from the carrier if you are not completely stock.
Click to expand...
Click to collapse
Im on stock and I cant update, no root, stock recovery, Ive been waiting for the update and nothing.
I dont know if is because Im outside US
I got mine back to stock and unrooted, but the upgrade still fails at about 25% and reboots. If I clear cache and wipe, it will download again, then fail again. Even after flashing back to stock, recovery still says rooted and so does the software upload screen. But I have confirmed that I am no longer rooted. I am about to give up.
I have converted my AT&T M8 to stock Dev Edition following this thread. Worked a treat.
http://forum.xda-developers.com/htc-one-m8/general/guide-update-to-official-developer-t3002003
I'm going on a vacation and want to use my phone as a transfer spot for photos taken with a DSLR. To do that, I will need to be able to copy/move files from the camera's SD card onto my phone's SD using USB OTG.
I understand that if I keep the stock recovery, loader, etc and only achieve root, then I will be able to get any OTA that becomes available. I will also be able to use one of the methods to enable writing to the SD of the phone.
So, the question is, how to get root without changing anything that will impact the OTA ability?
Hope I was clear in what I have and what I'm looking for.
No Direction?
Nobody?
GHammer said:
Nobody?
Click to expand...
Click to collapse
I've never heard of anyone wanting just root, so I'm not sure. But if your bootloader is unlocked you can try TowelRoot and see if that works and just install SuperSu through the playstore.
Unique
Ha! I'm unique.
Actually, I like Sense, and Lollipop is fine. I just didn't loike all the crap AT&T forced onto the phone and Uber was the last straw.
So, I want to keep the phone 'stock' except for accessing the extrenal SD.
I'll give Towelroot a shot and see how it goes.
GHammer said:
Ha! I'm unique.
Actually, I like Sense, and Lollipop is fine. I just didn't loike all the crap AT&T forced onto the phone and Uber was the last straw.
So, I want to keep the phone 'stock' except for accessing the extrenal SD.
I'll give Towelroot a shot and see how it goes.
Click to expand...
Click to collapse
Maybe I'm just off base here, but once the bootloader is unlocked, can't you just fastboot TWRP recovery, install SU (zip) file via recovery, then fastboot stock recovery and end up with a stock rooted device? Or does Lollipop not allow this?
DanGeorges said:
Maybe I'm just off base here, but once the bootloader is unlocked, can't you just fastboot TWRP recovery, install SU (zip) file via recovery, then fastboot stock recovery and end up with a stock rooted device? Or does Lollipop not allow this?
Click to expand...
Click to collapse
Hmmmm, perhaps just booting a recovery and installing SU would work.
See why I asked?
Guess this will wait for the weekend now. Restoring a phone takes more time than I have and it looks like I'm in uncharted territory.
Again, my objective is to have an OTA acceptable system with root.
Thanks for the two ideas, and of course, I'm open to others.
GHammer said:
Hmmmm, perhaps just booting a recovery and installing SU would work.
See why I asked?
Guess this will wait for the weekend now. Restoring a phone takes more time than I have and it looks like I'm in uncharted territory.
Again, my objective is to have an OTA acceptable system with root.
Thanks for the two ideas, and of course, I'm open to others.
Click to expand...
Click to collapse
I had a rooted device (4.4.2) and when I wanted the OTA to 4.4.4, I kept the root, but re-fastbooted the stock recovery so that the OTA would work. It kept my root (I think), and then I just re-installed TWRP so that I could still do backups..
I hope that someone with more knowledge than I will chime in if I'm wrong (or right).
DanGeorges said:
I kept the root, but re-fastbooted the stock recovery so that the OTA would work.
Click to expand...
Click to collapse
This is what I would suggest. There may be other ways (root without custom recovery). But I know for certain that the following will work: flash TWRP, flash SU or SuperSU to root. Than flash back to stock recovery.
You will be on stock recovery, have root, and should not impact OTA (provided all system files are also stock and not altered by root).
You can also try to fastboot boot TWRP (and then flash SU/SuperSU) without actually flashing TWRP. I'm not certain this will work, but I think it does under LP. I think something on 4.4.4 broke this ability, but then it came back.
Weekend Project
I will try the boot TWRP method first, and if that fails, I'll flash TWRP, get root, then go back to stock recovery.
This is now just an exercise to see which method works as the stock File Manager reads the USB and can copy files to the SD. I had not tried since 4.4.4. but did yesterday and it works for any kind of file.
I've had this pending on my phone for quite awhile, I haven't done it because I'm rooted. I decided one day to try it, my phone rebooted to TWRP and nothing happened. Which is exactly what I thought would happen. So I pulled the stock recovery from the stock rom and successfully flashed it. Tried the update again and I am getting a bit error from the stock recovery. The phone goes into "wtf just happened" mode and I have to do a battery pull and reboot. Which works fine. I don't really want to backup everything and re-root and reinstall everything, so does anyone know what my bootloader isn't seeing, but needs to see in order to push the update through?
Also, my phone isn't reading my brand new 64gb SanDisk evo suddenly. Was reading it fine last week... And ideas?
I'm on stock rooted ZV8 with sprint naval kernel.
Sent from my Sprint LG G3 sexiness via tapatalk
partitions may be zv4/zv6 on your phone? that may be why you cant do the OTA. what about dirty flashing stock rooted ZVA(not recommended, but works great for me)? there is a navel kernel for it also. Make a backup and if you dont like it, flash back? what connectivity fix does the ZVA update claim? I thought the only (LISTED) update was they added factory reset protection?
He can't take the OTA cause he has TWRP installed. OTA will only install with stock recovery. Probably will need to use the flashtool to go to complete stock if you want to receive the OTA.
Sent from my SM-G920P
Arjohns said:
He can't take the OTA cause he has TWRP installed. OTA will only install with stock recovery. Probably will need to use the flashtool to go to complete stock if you want to receive the OTA.
Sent from my SM-G920P
Click to expand...
Click to collapse
He said he put stock recovery back on, but yes he would probably need to flash completely stock to do the ota
Sent from my LGLS990 using XDA Free mobile app
Guess I should have read that better, sorry. As stated, try the rooted ZVA. OTA can be stopped due to edited build prop, debloating, etc. So complete stock through flashtool or flashing a rooted ZVA would be the only way to get to the new version.
Sent from my SM-G920P