Related
Like the title says who got a working N connection with the 101. I can only connect at 54. Using a netgear WNDR3700 router and WPA2 AES
Maurice
I'm in the exact same position. My N1 and my eeePC both connect at speeds greater than 54mbps, but the A101 will not go any higher than 54mbps...
I was running a speedtest compare between my Evo and the 70i and noticed a big difference in speed, ~3Mb in favour of the Evo. Also noticed that its only connecting at g and not n. Is there some sort of governing going on?
are we talking connecting to an n router or connecting at n speeds?
godashram said:
are we talking connecting to an n router or connecting at n speeds?
Click to expand...
Click to collapse
Connecting at N speeds.
However, I did set my router to N only mode and I was unable to obtain an IP address.
e4xda said:
Connecting at N speeds.
However, I did set my router to N only mode and I was unable to obtain an IP address.
Click to expand...
Click to collapse
does you router use 2.4Ghz or 5Ghz for n? what does the archos support?
My router is 2.4-2.5 ghz running DD-WRT. I checked the tech specs on Archos page but I don't see any info on what frequency they are using, just says it supports WiFi b/g/n.
http://www.archos.com/products/ta/archos_101it/specs.html?country=us&lang=en
e4xda said:
I checked the tech specs on Archos page but I don't see any info on what frequency they are using, just says it supports WiFi b/g/n.[/QUOT]
The Archos is 2.4 GHz only. However that doesn't matter, because I have both 2.4 and 5 GHz on my netgear WNDR3700. All my other devices with N are connecting at N speed to it.
I think the problem is the wifi driver from the archos, unless someone can show me that he is connected at N speed with his archos.
Maurice
Click to expand...
Click to collapse
It better not be false advertising... Or a fix better be made soon.
Sent from my HTC Legend using XDA App
i have a wndr3700 wireless router and using speedtest from the market i get
7.60 Mbps Down
3.41 Mbps Up
looks pretty fast N or not
I only have 5 GHZ N AP so I had to hook up a 2.4 GHZ "N" router that I have, but it is not really N, could never get 300Mbps connectoin on my laptop, but i get 54Mbps on the Archos, it seems fast enough to me.
not working
Very slow no N
I have 74 Mbit wireless connection with my 101 and an WRT320N-EU, so N does work in my situation
Emailed Archos regarding this issue, below is their answer.
"
Archos
Dear Customer,
We are working on this issue.
Kind Regards,
Archos Technical Support
Thank you for choosing Archos products.
We also have at your disposal on our website, FAQ's, firmwares and drivers.
Feel free to visit our it at website : http://www.archos.com
Please note that for your convenience we also saved a full copy of the manual on your Archos under the data folder."
Hello,
as I've read on the net, i9100 should be a dualband wifi device. 2.4 Ghz AND 5 Ghz ought to be supported.
I that true? Is someone actually using 5 Ghz-only mode or was that just marketing buzz?
greetings
No, it doesn´t connect to 5GHz WLAN
How could I control it ? I don't have anything related to it in my settings' panel ^^'
LightspeedGalaxy said:
No, it doesn´t connect to 5GHz WLAN
Click to expand...
Click to collapse
it does, i´m using it once in a while
sewe said:
it does, i´m using it once in a while
Click to expand...
Click to collapse
You are right! I just tried that, and it works just fine.
Thanks for your answers. But which one is correct?
Did you set your Wifi-AP to IEEE 802.11a which is 5Ghz or to 802.11n, which uses 2.4 AND 5 Ghz?
Please some more details. Right now the possibility for dualband is still just 66%
greetings
My case :
My house Router Setting - 2.4ghz band for Wireless G and 5ghz band for Wireless N... Both worked with my phone. But G on 2.4ghz more stable (most of the time 3bar or more), fot N on 5ghz sometime no network coverage.
My router : DLink Quadband DIR825
Sent from my GT-I9100 using XDA App
I'm using Apple's Time Capsule with both 5 Ghz N and 2.4 Ghz G and N.
As usual 5Ghz is faster but weaker in signal strength.
Yarymo said:
How could I control it ? I don't have anything related to it in my settings' panel ^^'
Click to expand...
Click to collapse
I tried to set my router to 5GHz mode, and it wouldn´t find the WLAN even if I´m standing next to the Router.
I only tried 802.11n, not 802.11a.
But as others said differently I may give it another try. My Firmware is still KE2, maybe the updated the WLAN-driver later?
I´d actually would like to be able to use 5GHz, as there are quite a few 2,4GHz WLANs next to me, so bandwidth isn´t always the best.
So, whats the case now? Are there several different Hardware/Softwarelayouts on the market or why are there these differences?
Can someone confirm that pure 5GHz wifi works or not, based on trial and error, and post his Firmware-details?
Greetings,
Fenrasa
EDIT:
i googled something VERY interesting:
[Firmware] I9100XXKG1 (Android 2.3.4) (05.07.2011) is supposed to be able to connect to 5GHz Wifis. Can someone try it out and confirm it?
Another poster to the thread wrote, that "KE2 and 7" ought to connect to 5GHz wifi as well.
SOURCE: --cant post link yet, need 8 posts ---
No people some ROM's supporting some NOT !!
Example: Stock Rom -supporting!
and LeoMar75 Rom Revolution
My EU device with KE7 ROM does connect to 5GHz on my WNDR3700 router. IIRC I had to make the SSID visible to make the original connection; once the connection was set up, I then reset the SSID to hidden.
Allright!
Samsung Galaxy S2 i9100 on I9100XXKE7 logged into my 5GHz Wifi. (Buildnummer GINGERBREAD.XWKE7)
Thank you all for your help!
Just a follow up question to this:
It appears the GS2 does have 5ghz support at least to some degree.
Is this 802.11a 5ghz, or 802.11n 5ghz, or both? And on a side-note, what's the fastest speed you've got it to negotiate with wifi? On my Galaxy S, even with 802.11n and 10 feet away from my router, I usually max out at 72 mbps.
It definitely supports 802.11n at 5 GHz, as that's how I connect to my home network. I have no idea how fast the link is -- never bothered to check.
Now that I'm at home, I just connected to my 5 GHz 802.11n, and the link speed reported by the SGS2 is 65 Mbps, the same speed I get connecting at 2.4 GHz. I'm sitting about 2 meters from my access point, and the 5 GHz signal strength is only "good", as opposed to "excellent" for the 2.4 GHz.
3waygeek said:
It definitely supports 802.11n at 5 GHz, as that's how I connect to my home network. I have no idea how fast the link is -- never bothered to check.
Now that I'm at home, I just connected to my 5 GHz 802.11n, and the link speed reported by the SGS2 is 65 Mbps, the same speed I get connecting at 2.4 GHz. I'm sitting about 2 meters from my access point, and the 5 GHz signal strength is only "good", as opposed to "excellent" for the 2.4 GHz.
Click to expand...
Click to collapse
Interesting, thanks 3waygeek! Glad to hear 5Ghz appears to work with 802.11n.
*Bump*
Anyone else have any experience/input?
5ghz works here too, speeds seem to be faster( not that they matter on real life conditions) but signal ill always be weaker for 5ghz as it doesn't penetrate walls and such as well as 2.4
Sent from Samsung Galaxy S2 on TELUS.
I am quite confused about the statements here regarding the signal ranges of a....n..
can somebody have a look at "http://en.wikipedia.org/wiki/IEEE_802.11" they give the largest ranges for ...n signals. The only thing I can confirm is that yes, I can connect to all: a... and ...n..
Well it may be useful to gather a collection of working/not working stats together to find the best rom/kernel/modem combos.
NOT working (5GHz network not detected, Time Capsule with separate named 5GHz channel, picked up fine by Macbook Pro):
ROM: VillainROM 2.4.2
Kernel: 2.6.35.11 ninphetamine 2.0.5, and also 2.1.3
Modem: XXKG6
ROM: LeoMar75 2.6 - XXKH3
Kernel: 2.6.35.11 ninphetamine 2.1.3
Modem: XXKH3
well, for those who can't connect to 5Ghz band, try to adjust channel setting on your router may solve the problem.
My S2 only supports 36-48 channels currently, and I can't find any region option in the setting menu.
BTW, yes, the 5Ghz signaling strength is not as good as 2.4Ghz. However, the trasmission rate (or efficiency) is much better than 2.4Ghz due to less interfere.
I have a wifi only GTab 10.1 connecting to a Linksys E1200 wireless-n router. The fastest speed I can connect is 65mbps. I have 2 laptops that connect to the same router and they connect between 150-300mbps. I am using the app 'cool wifi information' on my tab to show the connection speed. I am using Task650's v7.2 ROM.
Does anyone know if this is a limitation of the wifi module in the tab or should it be able to connect faster than 65mbps?
Thanks!
The 150-300 mpbs is achieved using Multiple antennas (MIMO). Laptops have the power to support the dual band channels, but I think phones and tablets are limited to single bands for power considerations, and so max out at 64 mbps.
Just got this phone today,
I have a Netgear R6300 capable of AC wifi but my phone wont connect to the internet when its on the 5ghz network. It works fine on the 2.5ghz but the other it connects but no internet.
I tried giving it a reserved ip and looking at the settings on my router but nothing is popping out at me?
Anyone have any ideas?
HTC One on Rogers network (Canada)
WakeTurbulence said:
Just got this phone today,
I have a Netgear R6300 capable of AC wifi but my phone wont connect to the internet when its on the 5ghz network. It works fine on the 2.5ghz but the other it connects but no internet.
I tried giving it a reserved ip and looking at the settings on my router but nothing is popping out at me?
Anyone have any ideas?
HTC One on Rogers network (Canada)
Click to expand...
Click to collapse
Check the Advanced Wi-Fi settings. Check Freq Band and make sure it is not set to 2.4 GHz only. Also try turning on "Best Wi-Fi Performance" and see if that helps.
Mine connects to my 5GHz network with no problems at all.
Hope that helps.
kevinrstruck said:
Check the Advanced Wi-Fi settings. Check Freq Band and make sure it is not set to 2.4 GHz only. Also try turning on "Best Wi-Fi Performance" and see if that helps.
Mine connects to my 5GHz network with no problems at all.
Hope that helps.
Click to expand...
Click to collapse
What router do you have? Also what kind of connection speed are you getting?
I checked freq and it was on auto, tried just 5ghz, also tried Best wifi but it still cant connect to the internet. I gets a connection with the router according to the phone but my 6300 doesnt show it as a connected device.
no problem here i can connect to my 5Ghz network with my a/n capable Time Capsule router. speeds are 55..27 Mbps download / 35.95 Mbps upload. my One wifi settings are set to Auto (vs. setting to 2.5 or 5 Ghz).
I have a Netgear WNDR4500. Speeds are 40 Mbps down and 28 Mbps up. That is with the router 2 floors above me in my house. My settings are also set to "Auto" as well. I connected immediately when I got home on Thursday after getting the device. I have had no problems at all with WiFi. Sorry I cannot be of more assistance.
I have no problem when connecting to my R6300 in AC mode ...
mine connects just fine
No connection at 5ghz, can only connect at 2ghz
I have d-link dr-825 rev B router with [DD-WRT v24-sp2 (04/01/13) std - build 21153] firmware. It has dual 2ghz and 5ghz radios.
I can only connect at 2ghz and unable to connect at 5ghz.
I have a dell latitude laptop and my old Galaxy SII has no problem connecting.
Howvever Htc-One lists the access point, correctly determines what kind of security is on (like wpa/wpa2 etc) but is unable to connect. I think once I saw a brief flash saying authentication failure on my phone when trying to connect to 5ghz. So I removed all security and made it completely open just to try. Again no connection without any error.
I am thinking of returning it if it is going to be a problem.
---------- Post added at 12:17 PM ---------- Previous post was at 11:40 AM ----------
Ok, I have solved the problem, now it is connecting. I made two changes in the wirless setup. Enable RTS/CTS protection and also enabled short preamble. After these two changes it is connecting as expected.
WakeTurbulence said:
Just got this phone today,
I have a Netgear R6300 capable of AC wifi but my phone wont connect to the internet when its on the 5ghz network. It works fine on the 2.5ghz but the other it connects but no internet.
I tried giving it a reserved ip and looking at the settings on my router but nothing is popping out at me?
Anyone have any ideas?
HTC One on Rogers network (Canada)
Click to expand...
Click to collapse
I'm having the same issue with mine and the same router, can not quiet figure out what is going on.
Just quick update i just did an update on my router and it seems to connect completely fine
For those who have router issues, check for a firmware update! Most routers have a few updates while sitting on the shelf. I used to always update and properly configure routers (with out the software disc) for customers at my old job and we rarely had problems of customers bribing it back. And throw out the disc that comes with the router. The software can cause headaches down the road. All security settings can be done inside the router through any web browser and router IP.
Just got a black ATT HTC ONE, everything is great, but no connection to 5ghz network here either.
I have a Netgear WNDR3700 and just updated to the DD-WRT build 21676, and still no go...
All our macbook airs are working fine on the 5ghz...:cryingrobably time for a new router lol
Connects to my linksys ea6500 5ghz ac just fine link speed around 400 mbps
Sent from my HTC One using XDA Premium HD app
Added an Airport Express, and 5ghz works fine from that...
cq_ said:
Just got a black ATT HTC ONE, everything is great, but no connection to 5ghz network here either.
I have a Netgear WNDR3700 and just updated to the DD-WRT build 21676, and still no go...
All our macbook airs are working fine on the 5ghz...:cryingrobably time for a new router lol
Click to expand...
Click to collapse
Prefers 2.4
I have a dual band N router, and my One seems to "prefer" connecting to the 2.4 GHz network over the 5 GHz.
It will work fine on the 5GHz, but I have to switch it manually when I walk in the house (so I usually don't).
I guess I could just tell my phone to "forget" the 2.4 network to fix this. On more thinking, maybe it's a coverage thing - it probably finds the 2.4 GHz network first. Lower frequencies penetrate walls better, right?
doxy-LS said:
I have a dual band N router, and my One seems to "prefer" connecting to the 2.4 GHz network over the 5 GHz.
It will work fine on the 5GHz, but I have to switch it manually when I walk in the house (so I usually don't).
I guess I could just tell my phone to "forget" the 2.4 network to fix this. On more thinking, maybe it's a coverage thing - it probably finds the 2.4 GHz network first. Lower frequencies penetrate walls better, right?
Click to expand...
Click to collapse
Correct. The 2.4 GHz network should travel further. Its all about that sweet sweet 5 GHz speed though! Mine connects to my Asus RT-AC66U router just fine.
doxy-LS said:
I have a dual band N router, and my One seems to "prefer" connecting to the 2.4 GHz network over the 5 GHz.
It will work fine on the 5GHz, but I have to switch it manually when I walk in the house (so I usually don't).
I guess I could just tell my phone to "forget" the 2.4 network to fix this. On more thinking, maybe it's a coverage thing - it probably finds the 2.4 GHz network first. Lower frequencies penetrate walls better, right?
Click to expand...
Click to collapse
You could always set it to 5ghz preferred. Mine connects to my netgear 5ghz ac router with no issues. Also if you have the same password for both frequencies it could just be connecting to that first.
Sent from my HTC One using Tapatalk 2
no preferred option?
godfirst said:
You could always set it to 5ghz preferred. Mine connects to my netgear 5ghz ac router with no issues. Also if you have the same password for both frequencies it could just be connecting to that first.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
I did check when sitting in my driveway - the 2.4 GHz network was still 2 "arcs" there & the 5 GHz was just a dot, so I think it is connecting to the first one it finds & sticking with it. In the Wi-Fi preferences, the "Wi-Fi frequency band" options are only Auto/5 GHz only/2.4 GHz only. No 'preferred' option - I'm running stock though - is there something different in the custom ROMs? I'm not afraid to root/ROM - I just haven't seen a good reason yet.
doxy-LS said:
I did check when sitting in my driveway - the 2.4 GHz network was still 2 "arcs" there & the 5 GHz was just a dot, so I think it is connecting to the first one it finds & sticking with it. In the Wi-Fi preferences, the "Wi-Fi frequency band" options are only Auto/5 GHz only/2.4 GHz only. No 'preferred' option - I'm running stock though - is there something different in the custom ROMs? I'm not afraid to root/ROM - I just haven't seen a good reason yet.
Click to expand...
Click to collapse
Use the only 5ghz only. There's a big difference with custom roms and stock att at the moment. There's new firmware etc. 2.4Ghz has more penetration through walls then 5Ghz. That's why you have more bars of one and not the other.
Sent from my HTC One using Tapatalk 2
godfirst said:
Use the only 5ghz only. There's a big difference with custom roms and stock att at the moment. There's new firmware etc. 2.4Ghz has more penetration through walls then 5Ghz. That's why you have more bars of one and not the other.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Well I want to be able to use the 2.4 GHz networks when available, so I'll leave it on auto. I guess the speed isn't a huge deal when the wireless connection is so much faster than my internet connection.
And yes, I know that there are lots of differences between stock & custom ROMs (my last phone was a Nexus S & I was always changing ROMs). What I meant to ask was if there was a difference with that specific option.
wifi 2.4GHz connection problems
Welcome
I have silver One for 3 weeks now, but it was 2 weeks in service - they reinstalled software and returned phone. No change.
I can't connect to any 2.4 Ghz network (G/N) ending Authentication Error. Only 5GHz works.
I tried it with Netgreat WNDR4700 (Gargoyle custom software), CISCO access point @ work, also random WiFi open networks in shops/malls, etc. Other devices i know and have at home ( Samsung Note II, htc Sensation, Acer Iconia tab, Dell Latitude laptop) works fine. Just the One cosing problems.
I run stock rom, how can I turn on more verbose logging or see what is happening in the Operation system while connecting? I must prove to Regenersis Poland service that my phone does not work. Otherwise they will say phone works within parameters.
Anyone using Wireless storage on 5GHz network? I want to know the speed of file transfer from PC as I planning to purchase a new router with 5ghz band and 300mbps data transfer. So can anyone help me should I upgrade or stay with my linksys 54mbps 2.5ghz router only.
Any idea on AC routers aur our device supports AC routers.
With linksys 2.5ghz I get 2mbps transfer speed not more than that.
Sent from my LG-D802 using Tapatalk
Sent from my LG-D802 using Tapatalk
That is actually a good question. I recently got an 802.11n router, might just test it out on it.
robogo1982 said:
That is actually a good question. I recently got an 802.11n router, might just test it out on it.
Click to expand...
Click to collapse
thnkx whats ur model no ? dual band router ? simultaneous dual band or single frequency at a time ?