Hi Everyone,
Picked up my Photon yesterday, gotta says I like it. Today I used the AIO 4G root method, very easy I must add, and I'm rooted and ready to go. I have a question about Clockwork Recovery for the Photon. My previous device, Moto droid X, used ROM Manager with clockwork 5.0.3.7, I think the numbers are right. What is available for the Photon and is there any requirements other than root? Do I need to be locked or un-locked? (I really don't want to break 4G to have CWM) I have Root Explorer and Tibu installed and can backup apps, but I would like to make a complete clockwork backup. Once this is possibble I'll be looking into Rom-ing and theme-ing.
Thanks
P.S. Is there a "Noobs Guide" to the Photon?
FernBch said:
Hi Everyone,
Picked up my Photon yesterday, gotta says I like it. Today I used the AIO 4G root method, very easy I must add, and I'm rooted and ready to go. I have a question about Clockwork Recovery for the Photon. My previous device, Moto droid X, used ROM Manager with clockwork 5.0.3.7, I think the numbers are right. What is available for the Photon and is there any requirements other than root? Do I need to be locked or un-locked? (I really don't want to break 4G to have CWM) I have Root Explorer and Tibu installed and can backup apps, but I would like to make a complete clockwork backup. Once this is possibble I'll be looking into Rom-ing and theme-ing.
Thanks
P.S. Is there a "Noobs Guide" to the Photon?
Click to expand...
Click to collapse
There is a guide in the Developer Section, but yes you have to be unlocked to use CWM, ROM Manager is not used on the Photon 4g, there is CM7 in the Developer section, that you will see once you go over there, I believe it says something along the lines of, Unlocking, Rooting, CM7, and more goodies with videos and links..
watch qbkings video on how to unlock mophos boot loader and flash clockwork its pretty easy i did it last night but remember to download android sdk cant unlock with out it
Related
Hey everyone, I am new to the rooting world however I have only experienced good things. I decided to root my thunderbolt using TB Autoroot+htc sync last night(had the original stock froyo, was going to installed cyanogen mod 7) and was successful. Unfortunately, I then installed the leaked 2.3.4 RUU GB which rerooted my TB before I installed the cm7(wanted to try the RUU out, bad idea lol). I was wondering if all or any of these are possible (dont care about losing data, just don't want to brick, ie avoiding command lines if possible):
1. root the phone while maintaining the leaked 2.3.4 RUU, just as was done for FROYO? Original reason for rooting was to remove the bloatware apps, but not having custom roms would be ok at this point if that is this is the only option. I know there is the revolution method to root, however will that work on the leaked 2.3.4 RUU?
2. root the tb with my current 2.3.4 RUU and install the BAMF 2.3.4/sense 3.0 GB build, or some other custom 2.3.4 rom?
A tutorial or walk through would be great! I know there are some out there, however I am looking for one specifically for those that have the leaked 2.3.4 RUU on the thunderbolt.
Also, can someone explain the difference in features of the GB builds that have been out for some time(customs) vs the RUU by verizon? I'm not talking about the physical aspects or the apps that come with, but more in terms of installing/switching between them. I know I need to root in order to install the custom roms, but assuming i can root the 2.3.4 RUU, will I be able to install any other 2.3.4 rom such as BAMF or cyanogen without problems? I have heard that you just arent allowed to go backwards, ie back to Froyo one you update to GB, but I should be able to install any 2.3.4 GB ROM once rooted via the bootloader(power+volume down) True?
Any help would be great! Thanks!
Yes you can. Just use revolutionary to root the new GB build. Here is a video tutorial for you.
Well, here comes your first less than pleasant reply...
Pretty much everything you wanted to know is posted in my thread stickied in the Q&A section. That's also where this post is going to end up. Please check my thread on basic noob questions, search before posting, and post in the correct forum.
Ota update after root
I just got this thunderbolt replacement in the mail. I noticed OTA was trying to update so I hurried and pulled the battery to intterupt the update since it was in the version I needed to be to ROOT. Ok I went ahead and ROOTED the phone then updated my RADIO (wich by the way is a big difference without it, it wont stay in 4g) ok so I think im good to go when I see the phone is trying to do a FIRMWARE update again, I dont know if this will ruin my root or phone so Im in airplane mode till I find out what to do. I dont know how to turn off automatic update and I dont want to mess up my root or phone. WHAT DO I DO PLEASE HELP!!!
Jeovanny said:
I just got this thunderbolt replacement in the mail. I noticed OTA was trying to update so I hurried and pulled the battery to intterupt the update since it was in the version I needed to be to ROOT. Ok I went ahead and ROOTED the phone then updated my RADIO (wich by the way is a big difference without it, it wont stay in 4g) ok so I think im good to go when I see the phone is trying to do a FIRMWARE update again, I dont know if this will ruin my root or phone so Im in airplane mode till I find out what to do. I dont know how to turn off automatic update and I dont want to mess up my root or phone. WHAT DO I DO PLEASE HELP!!!
Click to expand...
Click to collapse
If you are rooted, just use a program like root explorer to search for a file called otacerts.zip and rename it to otacerts.bak
When you open root explorer, make sure to put it into write mode. look at the top left side of the program and press on the mount r/w option
Cant find rom
I want to flash rom but I cant find it in my sd card through rom manager and also through recovery any suggestions its in the root of the phone highest directory
Jeovanny said:
I want to flash rom but I cant find it in my sd card through rom manager and also through recovery any suggestions its in the root of the phone highest directory
Click to expand...
Click to collapse
If you used your phone to download a rom, its in the "download" folder, move it to the root of sd card
Sent from my ADR6400L using XDA App
Root Error
I am trying to Root my Thunderbolt but keep getting the following error:
Failed to get Root!
I am using revolutionary.
I have installed, made sure their was a connection, and then removed HTC Sync.
I downloaded and installed Android USB Drivers.
I selected USB Debugging
Thunderbolt Info:
HBOOT 1.04.000
Android 2.3.4
ROM Ver 2.11.605.9
What am I missing and where can I get it? Can anyone help me out with this? Thanks in advance...
I've never rooted but I believe you need to downgrade. Revolutionary does not work with the latest OTA. There are several posts around that explain how to downgrade to the previous OTA (link below). Then you should be able to use the revolutionary method.
http://forum.xda-developers.com/showthread.php?t=1401959
Sent from my Thunderbolt using Tapatalk
Yes you need to downgrade to 2.11.605.5 then use reveloutionary
ok I got a question that needs a straight answer. I have a atrix4G from bell its on stock without root or anything. I have a lapdock coming in the mail!
What i would like to know is can i use the phone with the lapdock after i rooted and de-bloatware it??
even if i dont de-bloatware it can i use the phone rooted with the lapdock or will that be a problem. I just have some apps i want that need root
if i can is there anything that i need to do that is different then the normal root procedure?
thanks in advance and sorry if this sounds like a dumb question.
Root isnt a problem, but some of the moto system apps are needed.
Can I get rid of blur? And still use lapdock?
Sent from my MB860 using Tapatalk
yes you can as long as you are running stock rom/kernel underneath
if you managed to delete your webtop you can install Rom Manager, install ClockworkMod Recovery within rom manager, and flash the appropriate version of webtop (find it in the fruitcakes thread in the developer section).
htc rezound, bought phone today, it said theres an update, i updated now no root. i want root and used and unlocked with the all in one toolkit provided in one of these forums, however i do not want to flash a stupid recover or custom rom. i just want to download some apps that need root and delete bloatware. thanks in advance.
You don't need to flash a stupid recovery, you can flash a smart one called Amon Ra. Then just go into the devoloper menu and install su and you are rooted. Easy peasy. It'll be done in a minute and it won't hurt a bit. You can remain stock ROM, no need to flash a custom ROM.
^ You can even to back to the less-smart stock recovery after that's done.
Sent from my ADR6425LVW using XDA Premium.
Hi all.
Ok, I'm fairly confused as to how to go about rooting my transformer prime 9.4.2.21 tablet.
As I understand it, I should be able to unlock the tablet, then install a 'ROM' that is already rooted, which means..I can boot into the 'ROM' and have root access??
So, I set out and unlocked my tablet (I'm aware of the warranty repercussions). Done. Now I want to root the tablet so I can install Ubuntu or perhaps Debian on it...does anyone know how I go about this?
I'm SURE this has been asked, I just can't seem to find it...I'm also quite new to the mobile 'hacking' world, and I'm a bit confused about all the buzz words (i.e. 'flashing a ROM', etc)..
I appreciate any help!
Cheers
I am pretty sure the next step after unlocking it is installing CWM, then using that to install the ROM of your choice.
Anyone else want to chime in here?
A.) Unlock.
B.) Flash ROM (you may want to pick before unlock0.
C.) Enjoy.
Unless it says otherwise you can assume any ROM that isn't from the manufacture, is rooted. The development section has ROMs, unlock, and Ubuntu crap. I use Debian in a chroot rather than native, and forgo X11. You may have to search for some things.
Can you point out a thread on how to install CWM from an unrooted device? Been searching,, but every thread points to Viperboy's thread, which will not work on .21.
aawshads said:
Can you point out a thread on how to install CWM from an unrooted device? Been searching,, but every thread points to Viperboy's thread, which will not work on .21.
Click to expand...
Click to collapse
You can't install CWM if you haven't unlocked. Root doesn't have anything to do with unlocking.
I suggest using Viperboy's tool to unlock your device. Be careful to follow ALL the directions and you'll be just fine.
Now I want to root the tablet so I can install Ubuntu or perhaps Debian on it...does anyone know how I go about this?
Click to expand...
Click to collapse
Rooting and unlocking are different. If you are unlocked, research which ROM you'd like to install and follow the directions in that thread. Virtually every ROM thread has the directions listed. There's even a thread if you want to try Ubuntu, though it has limited functionality right now.
Personally, I like Jermaine's AOKP ROM. It is really fast and smooth.
That's all well and good, how do you install CWM after unlocking? All of the posts say to use viperboy's tool, but it is not available at this time, the link is dead.
On version 4.5 that I already have option 5 unlock says "MUST BE ROOTED!!"
Are you saying it works without root? Or will the Fastboot method here work?
ok mcliar, I found in another thread from you this:
EDIT: I fixed it! I was able to pull an .apk of OTA Voodoo Rootkeep from a previous Titanium Backup file. I installed the app, and it restored root for me! Its possible that I was already still rooted, but without the ability to d/l apps I couldn't do anything about it. Anyway, I'm back with a rooted .21!
I have a similar situation, lost wifi, did a factory reset, lost voodoo and now can't reroot. How did you pull the apk and install it on the prime?
aawshads said:
That's all well and good, how do you install CWM after unlocking? All of the posts say to use viperboy's tool, but it is not available at this time, the link is dead.
On version 4.5 that I already have option 5 unlock says "MUST BE ROOTED!!"
Are you saying it works without root? Or will the Fastboot method here work?
ok mcliar, I found in another thread from you this:
EDIT: I fixed it! I was able to pull an .apk of OTA Voodoo Rootkeep from a previous Titanium Backup file. I installed the app, and it restored root for me! Its possible that I was already still rooted, but without the ability to d/l apps I couldn't do anything about it. Anyway, I'm back with a rooted .21!
I have a similar situation, lost wifi, did a factory reset, lost voodoo and now can't reroot. How did you pull the apk and install it on the prime?
Click to expand...
Click to collapse
I had a backup apk from titanium backup. I'll attach the apk so you can see if it works for you.
Yes, Viperboy's tool will unlock and install CWM without root (EDIT: come to think of it, I was rooted when I ran this. You can follow this if it doesn't work for you--->). Alternatively, you can use the ASUS tool itself, and then follow this thread to install CWM.
seems like everything needs root...
Ok...
So, I need to 'Flash a ROM'...right. I'm looking in the development section, and the ones I'm looking at require CWM to be installed..but that (from what I can find) requires root to install...
There was a mention of ViperMOD. However, from what I can tell that program will install CWM after you root the device, which it can't for me, as I'm running .21.
I've also read several mentions about using Rom Manager. I installed the free version, and tried to install CWM that way, but it failed with 'An error occurred while attempting to run priviledged commands', presumable because I need to root the device first.
Soo...it really looks like I need to root the device before I can do anything. Is this incorrect? It seems like it is, but when I look into the suggestions listed here I seem to run into a brick wall because I need a rooted device...
I appreciate all the suggestions guys, I really want to get stuff working on my TFP. Any help is (as always!) appreciated.
Thanks
McLiarpants said:
I had a backup apk from titanium backup. I'll attach the apk so you can see if it works for you.
Yes, Viperboy's tool will unlock and install CWM without root (EDIT: come to think of it, I was rooted when I ran this. You can follow this if it doesn't work for you--->). Alternatively, you can use the ASUS tool itself, and then follow this thread to install CWM.
Click to expand...
Click to collapse
oops sorry, I missed that CWM link...I'll check that out.
I have been researching all day, you will need to use fastboot in order to install cwm for the first time if you don't already have root. It will be what I use if I cannot get this titanium backup apk to work.
Mcliar, I appreciate you getting me the APK. I will let you know how it goes.
Could you post the backed up "su" for "OTA Voodoo Rootkeep" (i am guessing it stores the file in the application folder). I am wondering if it would be able to use this back to root the TF201
thanks
k
Hey all, I'm looking to eventually install CyanogenMod 10.1 on my verizon galaxy S4. However, being a complete novice on this type of thing makes me a bit nervous about bricking my expensive phone.
So, I thought it would be good to try and understand the process of rooting and installing the custom rom. Could you guys help me out? I'll list what I know.
First thing I want to do is backup the Android stock rom that came with the phone. I have read that rooting or installing a custom rom (like CM) will void my warranty, so that's not good. But re-flashing the stock android that came with the phone will remedy this. To do this, I found this guide on using Nandroid. I don't think the CWM way will work for Verizon galaxy S4 (read that somewhere, but correct me if that's wrong).
However, it says that I am required to have a rooted phone first before running Nandroid.
Because Verizon's Galaxy S4 comes with a locked bootloader, and an unrooted phone, I need a way to root my phone. I found this nifty all-in-one tool by bhp090808.
The way that tool works is it exploits something in verizon's pre-release kernel of the S4, so it flashes the phone with the pre-release kernel, gets root privileges, then reflashes the stock kernel. Once this is done, my phone will be rooted and I assume I can use Nandroid to backup the stock android on the phone.
This is where I'm stuck. I have a few questions regarding various parts from here on:
1) Since the phone is rooted and I run Nandroid to back up the stock android rom, wouldn't Nandroid back up the stock android rom with the root access? If I needed to return my phone to Verizon under warranty, re-flashing this stock rom would still void my warranty because it still has root access? Is there a way to completely revert to stock android with verizon's unrooted and locked bootloader status (and whatever else)?
2) Does the all-in-one tool unlock bootloader? I found a tool called loki which will unlock the bootloader so that I can install custom roms like CyanogenMod. I looked in the all-in-one tool's zip folder, and it contains a file called "loki_flash", but I am unsure if this is unlocking the bootloader or not.
3) Can I re-flash a stock android if I brick my phone? What exactly does 'bricking' the phone mean?
goodmedic said:
Hey all, I'm looking to eventually install CyanogenMod 10.1 on my verizon galaxy S4. However, being a complete novice on this type of thing makes me a bit nervous about bricking my expensive phone.
So, I thought it would be good to try and understand the process of rooting and installing the custom rom. Could you guys help me out? I'll list what I know.
First thing I want to do is backup the Android stock rom that came with the phone. I have read that rooting or installing a custom rom (like CM) will void my warranty, so that's not good. But re-flashing the stock android that came with the phone will remedy this. To do this, I found this guide on using Nandroid. I don't think the CWM way will work for Verizon galaxy S4 (read that somewhere, but correct me if that's wrong).
However, it says that I am required to have a rooted phone first before running Nandroid.
Because Verizon's Galaxy S4 comes with a locked bootloader, and an unrooted phone, I need a way to root my phone. I found this nifty all-in-one tool by bhp090808.
The way that tool works is it exploits something in verizon's pre-release kernel of the S4, so it flashes the phone with the pre-release kernel, gets root privileges, then reflashes the stock kernel. Once this is done, my phone will be rooted and I assume I can use Nandroid to backup the stock android on the phone.
This is where I'm stuck. I have a few questions regarding various parts from here on:
1) Since the phone is rooted and I run Nandroid to back up the stock android rom, wouldn't Nandroid back up the stock android rom with the root access? If I needed to return my phone to Verizon under warranty, re-flashing this stock rom would still void my warranty because it still has root access? Is there a way to completely revert to stock android with verizon's unrooted and locked bootloader status (and whatever else)?
2) Does the all-in-one tool unlock bootloader? I found a tool called loki which will unlock the bootloader so that I can install custom roms like CyanogenMod. I looked in the all-in-one tool's zip folder, and it contains a file called "loki_flash", but I am unsure if this is unlocking the bootloader or not.
3) Can I re-flash a stock android if I brick my phone? What exactly does 'bricking' the phone mean?
Click to expand...
Click to collapse
I see its been a few days and no one has replied so I will do my best to share what knowledge I have. I've been heavily flashing custom ROMs on my ASUS tablet now for the better part of a year and just got my Verizon GS4, so I have alot of the same questions as you.
1) I'm going to answer this in two parts.
Nandroid, in my experience, refers to the type of backup, not necessarily the process by which to backup. Most common recoveries, including ClockworkMod and TWRP have a feature to create a 'nandroid backup'. This can take some time and files can be quite large, as they copy pretty much every single file on your device; almost like creating a snapshot of your device in that moment in time.
To answer the later part of this question, (typically speaking) once you unlock a bootloader you cannot re-lock it, but that could be different for phones (my knowledge in phones is limited). And yes, using a nandroid backup will back up your device with root access, but using a tool such as Rom Toolbox, you can easily un-root (the program features a 'permanent unroot option'). For one, I would imagine that flashing the stock kernel would overwrite the root, as like you said earlier in the post the current root exploit works by flashing a pre-release kernel, applying root to the device, then re-flashing the current stock kernel. Another way to lose root is to get an over-the-air (OTA) update. You will see programs like OTA Rootkeeper that work to circumvent this, but in your case that may be a valid way to cover your arse in case you need to return it under VZW warranty (it is for this reason that I always buy Best Buy protection plans, because they could care less about the software state about your device [Disclaimer: I worked for Geek Squad so I have /somewhat/ intimate knowledge in this matter])
2) I just rooted my GS4 a few days ago, and nothing I read indicated that the all-in-one tool would unlock the bootloader. If you read the documentation about Loki, he explains this fact. I just found a good video (although it uses TWRP and GooManager instead of ROMManager and CWM) explaining that there isn't a bootloader "unlock" just yet; rather its a workaround to the bootloader that allows us to get custom ROMs on our devices (video is here)
3) "Bricking" a device means rendering the device useless; it won't operate to any fashion that it is useful to you, so its no better than a brick or a paper weight, etc. I would imagine you can re-flash a stock verizon ROM/kernel to restore any screw-ups, but keep in mind this device was released less than three months ago and any development is relatively new. Yes, we have had other Galaxy S series phones, but the S4 has this whole KNOX nonsense that is specifically designed to prevent the kinds of activities we do here on this forum
I really hope that helps. If I said anything that is incorrect, please please feel free to correct it so that at least we can all learn the proper information.
Thanks,
Opethfan89
goodmedic said:
Hey all, I'm looking to eventually install CyanogenMod 10.1 on my verizon galaxy S4. However, being a complete novice on this type of thing makes me a bit nervous about bricking my expensive phone.
So, I thought it would be good to try and understand the process of rooting and installing the custom rom. Could you guys help me out? I'll list what I know.
First thing I want to do is backup the Android stock rom that came with the phone. I have read that rooting or installing a custom rom (like CM) will void my warranty, so that's not good. But re-flashing the stock android that came with the phone will remedy this. To do this, I found this guide on using Nandroid. I don't think the CWM way will work for Verizon galaxy S4 (read that somewhere, but correct me if that's wrong).
However, it says that I am required to have a rooted phone first before running Nandroid.
Because Verizon's Galaxy S4 comes with a locked bootloader, and an unrooted phone, I need a way to root my phone. I found this nifty all-in-one tool by bhp090808.
The way that tool works is it exploits something in verizon's pre-release kernel of the S4, so it flashes the phone with the pre-release kernel, gets root privileges, then reflashes the stock kernel. Once this is done, my phone will be rooted and I assume I can use Nandroid to backup the stock android on the phone.
This is where I'm stuck. I have a few questions regarding various parts from here on:
1) Since the phone is rooted and I run Nandroid to back up the stock android rom, wouldn't Nandroid back up the stock android rom with the root access? If I needed to return my phone to Verizon under warranty, re-flashing this stock rom would still void my warranty because it still has root access? Is there a way to completely revert to stock android with verizon's unrooted and locked bootloader status (and whatever else)?
2) Does the all-in-one tool unlock bootloader? I found a tool called loki which will unlock the bootloader so that I can install custom roms like CyanogenMod. I looked in the all-in-one tool's zip folder, and it contains a file called "loki_flash", but I am unsure if this is unlocking the bootloader or not.
3) Can I re-flash a stock android if I brick my phone? What exactly does 'bricking' the phone mean?
Click to expand...
Click to collapse
The S4 link in my signature has a few stock images to pick from. It will restore it to the original stock Verizon software that came with your phone.
DarkMenace said:
The S4 link in my signature has a few stock images to pick from. It will restore it to the original stock Verizon software that came with your phone.
Click to expand...
Click to collapse
Does the 'Ad-Free' APK I see available on that website work better than jRummy's AdBlocker? I installed it and it detects ads (like in ASTRO, Zedge, and a few others) but doesn't block them even though I have all the settings turned ON and have rebooted when requested.
That said, thanks for the link. I've bookmarked it for future reference and its good to know there are backups available in case anything goes bad.
Are you able to elaborate on how these are flashed? Via ODIN, or can you flash it via CWM/TWRP?
Thanks,
Opethfan89
opethfan89 said:
Does the 'Ad-Free' APK I see available on that website work better than jRummy's AdBlocker? I installed it and it detects ads (like in ASTRO, Zedge, and a few others) but doesn't block them even though I have all the settings turned ON and have rebooted when requested.
That said, thanks for the link. I've bookmarked it for future reference and its good to know there are backups available in case anything goes bad.
Are you able to elaborate on how these are flashed? Via ODIN, or can you flash it via CWM/TWRP?
Thanks,
Opethfan89
Click to expand...
Click to collapse
I'm not n sure. It's the only one I ever used for banner blocking. You use the files with Odin as well after they are extracted.
Sent from my Rooted Verizon Samsung Galaxy S4 using xda premium