I plugged my headphones in for the first time today and i realized that the left side was quieter than the right. And I unplugged it and replugged it in and it was fine. Then I tried it again and the left side was lower again. I'm not sure what's causing this or if my tablet is defective. But it seems like a hit or miss on getting even volume from both sides.
Anyone else having this problem or can test it out?
I have te same issue and it happens every time I plug in headphones and its annoying.
For me this only happened when I use my SGS2 headphones on Nook.
Actually, I found that SGS2 headphones only work well on the SGS2. With my laptop they have tons of noise, on nook sometimes I have uneven volume.
Although on SGS2 they have the best sound I've ever heard in headphones..
Have you guys tried other headphones?
I only have the one pair of head phones and they are a generic brand from dollar general and they dont have any issues when i use them with either my pc or psp or phone for that matter
Montisaquadeis said:
I only have the one pair of head phones and they are a generic brand from dollar general and they dont have any issues when i use them with either my pc or psp or phone for that matter
Click to expand...
Click to collapse
My 5$ noise isolation headphones work just fine? O_O
Montisaquadeis said:
I have te same issue and it happens every time I plug in headphones and its annoying.
Click to expand...
Click to collapse
This.
Every single time.
no issues here.
No issues here.
Headphone bug
Yes I too have that problem. Glad to see that it's not just me & mine.
Stupid question - for those having issues, have you tried wiggling or rotating the plug once it is plugged in? Sometimes I find if I have a spot of oxidization on the plug it will cause said uneven volume. It could explain the difference that occurs when you unplug/plug back in.
Another thing to try would be to plug them in when the device is asleep to see if that helps. If there is anything that tries to reduce the "pop" of the sound of plugging in the headphones it *might* affect how they sound after the fact.
Just grasping at straws here based on my experience with other devices.
I was having this problem until I realized I only had my headphones plugged in half way. Don't mean to be a jerk, but have you tried plugging your headphones in just a little further?
Sent from my DROID BIONIC using Tapatalk
no amount of fiddling with the plug helped me at all still have the issue and its annoying since the speaker isnt loud enough when I am out and about.
Another thing to consider - another issue I've had with certain device/headphone combos is that some headphone jacks either don't have a long enough plug or the plastic jacket of the jack interferes just enough with the plug in the device to affect sound (essentially related to downsay's comment). Try a cheap pair of 'phones from the dollar store with a simple jack and see if the problem persists. If so, perhaps the device is defective...
These are a cheap pair of head phones from dollar general lol.
Edit: Plugging the headphones in while the device was asleep seems to have fixed the issue for me for now. Sound is equal in both cans now
I have tried 4 different earphones, they have been plugged in all the way. Some people have no problem, so I'm beginning to think this is a hardware defect. I'm going to exchange mine and will let you guys know if there is a difference. I'll also try out the display model and see if it suffers from this problem.
Glad to hear you got them to work. Please do let us know how it goes with returning the nook tablet.
Sent from my DROID BIONIC using Tapatalk
I replaced my Nook twice partially due to this issue. Same problem on all three and it's always the left channel that is not connecting properly. I have found that I can get a good connection by plugging the jack in slowly. I think this is more a software issue than a hardware issue.
Yea just exchanged my tablet as well and the same issue is there as well as the one at the store. Plugging in slowly does help. Just before it engages the last click, if you hear both channels you're golden. Hopefully this is a software issue because it seems to be random. Unfortunately the one I exchanged has a creaking case, so now back to exchange again.
I stopped by Radio Shack this afternoon and purchased a $5 female to male 1/4" stereo connector. It seems to have solved the problem. I had similar problem years back with an iPaq PocketPC. Due to the shape of the hole on the iPaq/Nook, the headphone/earphone connector isn't inserting deeply enough.
Another solution would be to use something like a Dremel Mototool and shave away some of the excess material on the headphone/earphone adapter, so it can insert a little bit deeper.
ibgap said:
I think this is more a software issue than a hardware issue.
Click to expand...
Click to collapse
What is everyone testing their audio on? The stock media player? Video (what program)? Is it on every application you try?
I haven't had any issues with audio in games, websites or MX player at all other than a loudish pop when some programs start up, but I'm using a set of Denon stereo headphones (so, good (large/long, gold) headphone plugs on it, jiggling the connection does nothing).
Related
I was on my nightly bicycle ride using Cardio Trainer and my Skull Candy Smokin Buds, and everytime id move the phone in my bicycle jersey near the headphone jack it would cause the music to skip/stop/ff sometimes try to voice search and sometimes try to redial out ... I can replicate the problem here at home by jiggling the headphone jack around abit .......... anyone else
Yes. I posted the exact same thing in Q&A forum. Got no response but I figured it out.
Sometimes when you plug in your headphones they are detected as a headset. It doesn't occur that often, just make sure the notification icon doesn't have the microphone part. Otherwise any shaking causes songs to skip, phone to freak out and voice dialer starts.
Apparently there's also an app that makes sure they always do connect in headset mode. I think I'll go replace my phone anyway.
Sent from my PG86100 using XDA App
I had the same thing happen yesterday. I was testing some speakers at a job site and the phone was going CRAZY. I pulled the phone out of the otterbox case and re-plugged the headphone in and it was fine. I think my problem was the case + cable was not making the correct contact. Today I had the headphones from a PSP plugged in (with case) and it was fine.
Looks like its the same thing that was heading to my evo4g. The headphone input is design for 3 ring conductor (for remote control) but your headphone jack has 2 ring conductor thus making your phone act weird. I brought an adopter (you can go search amazon) and it fixed the problem.
go to marketplace and download "headset blocker". it wont show up in your apps list. go to 1 of your homescreens, and add its widget. its a toggle that you turn on and off. when its on, none of the headphone control features will work, and it it should just play your music without skipping tracks and what not.
I have the same issue did you ever figure it out?
Like previously mentioned this is because it is designed for a 3 ring conductor. 1 is left, 2 is right, 3 is microphone/control. The controls are back track, forward track, pause/play/answer/hangup. If you have a pair of headphones with 2 conductor (which is fine and it is also designed for) you are good. If, however, you aren't making full contact (because of cases being in the way or you have a 'non standard' headphones, read: cheap ****) wacky things can happy from intermittent contact of the various points.
I've never experienced this on either phone, but, it is a thing and it makes perfect sense.
There is another possibility...that the jack is fncked up. Poorly soldered, defective jack, abused (all it takes it one good jerk on the cable to ruin everything).
It's not as random and wacky of a situation as it sounds like.
I have two different 2 ring (stereo) headphone cables from two different manufacturers and the cable has nothing to do with the issue in my case. The issue is not with headphone/earbuds and not with the cable not plugging in all the way. The issue for me is that when you have the headphone cable plugged into the jack and the other end is feeding any type of amp: stereo equipment, Aux input in a car, whatever, the phone absolutely loses its mind. I've tested it on three different phones now and it does it every time. The phone is unusable until you download, install, and activate Headset Blocker from the market. Then everything works perfectly. It appears to be a defect in either the hardware or the software because it is picking up electrical noise as headset control signals.
BTW, I've measured the cables and tested to be sure they plug in all the way. They are standard 2 ring (which means three conductor) cables that should not be triggering any headset functionality. Something on these phones is falsely triggering the headset connection: maybe some very small electrical signal or voltage coming from aux inputs because as I said, earbuds/headphones with the exact same connector don't have the problem.
Mike
I had the same problem and just swapped it for a new phone. If you're still under 30 days just take it back.
mikeyxda said:
I have two different 2 ring (stereo) headphone cables from two different manufacturers and the cable has nothing to do with the issue in my case. The issue is not with headphone/earbuds and not with the cable not plugging in all the way. The issue for me is that when you have the headphone cable plugged into the jack and the other end is feeding any type of amp: stereo equipment, Aux input in a car, whatever, the phone absolutely loses its mind. I've tested it on three different phones now and it does it every time. The phone is unusable until you download, install, and activate Headset Blocker from the market. Then everything works perfectly. It appears to be a defect in either the hardware or the software because it is picking up electrical noise as headset control signals.
BTW, I've measured the cables and tested to be sure they plug in all the way. They are standard 2 ring (which means three conductor) cables that should not be triggering any headset functionality. Something on these phones is falsely triggering the headset connection: maybe some very small electrical signal or voltage coming from aux inputs because as I said, earbuds/headphones with the exact same connector don't have the problem.
Mike
Click to expand...
Click to collapse
It sounds likely that it could be a grounding issue, probably on the amp side...though it could be on the phone side, especially if this happens to some phones and not others. If this is pro gear there is probably a ground lift switch on the back...give that a shot, if it doesn't help then it is definitely the phone...which I am leaning towards since it seems to happen on some and not others.
Headset Blocker from Market. I had a video on youtube about this and my thread is here.
i am having the same problem. thanks for the heads up for the headset blocker app. beats using up warranty or paying deductible for now.
I know this thread is 2 years old, but I figured bumping is better than starting a new thread. Anways, this issue has been driving me crazy to no end. Headset blocker stops the false signals. However, if it's in your pocket and the base of the jack is bent, (at least on Skullcandy products + HTC Inspire), music stops playing from the left ear.
Anyways, I figured out a solution to this. Cut a 3.4mm hole in a credit card, and then insert your headphone jack. Trim the card around where you insert the headphone jack. To get the right size hole, I use a knife to penetrate the card, and then use a screwdriver to widen the hole until it's about right. It should stop all interference and false signals, audio cutting when your phone is in your pocket and the headphone base is bent.
This also works on heaphones that have microphones; however, you have to remove the plastic piece if you want to use the mic.
Abaout those adapters on Amazon that someone mentioned; what do I search to find them?
daneurysm said:
It sounds likely that it could be a grounding issue, probably on the amp side...though it could be on the phone side, especially if this happens to some phones and not others. If this is pro gear there is probably a ground lift switch on the back...give that a shot, if it doesn't help then it is definitely the phone...which I am leaning towards since it seems to happen on some and not others.
Click to expand...
Click to collapse
Nope, it's certainly on the phone side.
I've had the same issues plugging it into my car and into professional audio equipment.
Headset blocker is great. I just keep it on all the time.
It was pretty funny sitting in the car and realizing that it's dialing everyone on your contact list though. Couldn't make it stop even after unplugging it. It went crazy.
DjDom said:
Nope, it's certainly on the phone side.
I've had the same issues plugging it into my car and into professional audio equipment.
Headset blocker is great. I just keep it on all the time.
It was pretty funny sitting in the car and realizing that it's dialing everyone on your contact list though. Couldn't make it stop even after unplugging it. It went crazy.
Click to expand...
Click to collapse
i have the exact same thing on my device, but it happens with any headphones i have plugged in
moving them just a bit causes google now to launch repeatedly and the music to skip,play,pause,etc
to fix it i remember using a blocker from the market and editing the code that launches google now via headphones so the blocker would block it aswell
Full description of the problem:
I just got my EVO 4G LTE the other day, as a replacement to my original EVO 4G. However, I noticed when it was plugged into my car's AUX port, it puts out a high-pitch (like a teapot) noise. This noise happens as long as the headphone jack is powered up (something playing). Even if I turn the phone's volume down all the way, the high pitch is still heard. Otherwise, the audio from the phone can also be heard normally.
Things I've tried:
1. Different cables known to work. All act identically.
2. Headphones. They work fine.
3. Another car's AUX port. Worked fine.
4. Jiggling the jack on either end causes the pitch to change momentarily, but does not go away.
5. Slightly unplugging it from the car side (so one of the channels is not connected) makes it go away, leaving me to believe the high pitch noise is only coming from one channel (I believe the right channel, hard to tell).
Things I don't want to do:
1. Get a new car stereo.
2. Use a Bluetooth adapter. I already have the Stereoclip, and it doesn't do phone calls. Anything else sounds awful with music.
Does anyone have any solutions? I think its some sort of strange feedback/grounding issue, but I have no idea how I would fix this.
I don't have a solution, but I am experiencing the same issue with the phone plugged into my car's AUX. As long as music is playing I can't really hear the whine, but between songs it's pretty annoying.
I haven't tried playing around with the different EQ settings. By default it's been going to Beats. I may switch to a different setting or try a different player like Winamp. I'm currently using the HTC media player.
jasonkc25 said:
I don't have a solution, but I am experiencing the same issue with the phone plugged into my car's AUX. As long as music is playing I can't really hear the whine, but between songs it's pretty annoying.
I haven't tried playing around with the different EQ settings. By default it's been going to Beats. I may switch to a different setting or try a different player like Winamp. I'm currently using the HTC media player.
Click to expand...
Click to collapse
In my experience it has absolutely nothing to do with what app is being used, nor the EQ. It's nothing software as far as I can tell.
This fixes it:
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ
if your phone is plugged into the car charger and your audio jack is plugged in to listen to music. what our hearing is a ground loop from the cars alternator. try unplugging the power supply and see if that helps..
papadunit said:
if your phone is plugged into the car charger and your audio jack is plugged in to listen to music. what our hearing is a ground loop from the cars alternator. try unplugging the power supply and see if that helps..
Click to expand...
Click to collapse
The car charger makes no difference. I have tried using nothing but the audio cable in the phone and still had the static.
I was under the impression that a normal ground loop would require a charger, but...
Modplan: are you sure this will fix it if the noise occurs even without the charger plugged in? The noise is high-pitch, not really a hum, so I'm wary as to whether it will help here.
Its not a simple ground loop problem. I wired my power to the phone using a separate ground from the car's common ground and the issue still persisted.
Try cranking the volume up then when you hear the noise, start playing with the touchscreen. When i did this the noise started changing according to the movement of my fingers. I concluded that there is something going on with the grounding of the capacitive display thats causing another grounding issue, but its not an issue with the car, but an issue with the phone.
I didn't want to go through the vicious cycle of returning my phone over and over until i get one that didn't have this fault so i just went with a samsung hs3000 hardwired in to my car.
lacrossev said:
Its not a simple ground loop problem. I wired my power to the phone using a separate ground from the car's common ground and the issue still persisted.
Try cranking the volume up then when you hear the noise, start playing with the touchscreen. When i did this the noise started changing according to the movement of my fingers. I concluded that there is something going on with the grounding of the capacitive display thats causing another grounding issue, but its not an issue with the car, but an issue with the phone.
Click to expand...
Click to collapse
I wasn't able to replicate this.
I've had the same issue, but it's only when charging. I figured it had something to do with the aluminum body and, as papadunit said, a problem with grounding and your car's alternator and blah blah blah science.
modplan said:
This fixes it:
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ
Click to expand...
Click to collapse
I'm happy to report that this actually did solve the problem, amazingly. Thanks!
Actually had same issues this passed weekend but with my asus transformer. Was using it for navigation tethering from evo with both charging from my 400w inverter. Plugged transformer into aux and had same high pitching noise only when inverter was plugged in. Even tried different audio cables, same chit.
Sent from my EVO LTE
Headset Jack's other issues
I can confirm the same behavior with my EVO 4g LTE. My HTC Touch Pro 2 or Iphone 4s never had any of these issues with my vehicle's AUX jack. I also verified that if I turn the volume on the phone all the way down that the noise is audible on the vehicle's sound system. It also doesn't matter what player I use or if I add any equalizer settings to the audio. Finally, the noise is present whether the car is running or not.
Can you guys confirm: If you pause the audio on your player does the whine end about 4 seconds after and startup again if you press play? Or if you shut the player down does the noise go away shortly after?
I did some research and some said it has to do with the AUDIO DAC in the phone turning on and off as audio is played, paused, etc. If the output device has high sensitivity these sounds appear.
I had another issue with my Plantronics wired headset distoring when making phone calls. It did not present the whine but it distorted the callers voice as if the treble or bass was too high. I tried various audio settings but nothing changed. With other headsets the issue does not present itself. I think that the audio DAC is also sending higher/lower frequencies that are greater than some headsets can handle.
That Kensington thing that was posted can easily be made with common household parts. Basically all you need to do is take the big bulgy thing from any cable that would have it and attach it to your audio cable. It works best if you have one near each end of the cable. it's called a clamp-on ferrite bead and is just a clip with iron ferrite in the middle. Since i'm new I can't post a link buuuut what I can do is tell you the keywords to look up on google for the ehow link: cable magnets eliminate emi . enjoy!
lacrossev said:
Its not a simple ground loop problem. I wired my power to the phone using a separate ground from the car's common ground and the issue still persisted.
Try cranking the volume up then when you hear the noise, start playing with the touchscreen. When i did this the noise started changing according to the movement of my fingers. I concluded that there is something going on with the grounding of the capacitive display thats causing another grounding issue, but its not an issue with the car, but an issue with the phone.
I didn't want to go through the vicious cycle of returning my phone over and over until i get one that didn't have this fault so i just went with a samsung hs3000 hardwired in to my car.
Click to expand...
Click to collapse
Mine changes pitch according to my cars rpms
Sent from my EVO
I am getting this with headphones, i have used multiple brands and its hit or miss but more hit than miss :laugh:, anyone getting it in there headphone?
I was getting this issue until I installed a custom ROM. Running MeanROM right now with no background noise. Seems counterintuitive to me...but whatever.
J
Sent from my EVO using xda app-developers app
dankorzon said:
That Kensington thing that was posted can easily be made with common household parts. Basically all you need to do is take the big bulgy thing from any cable that would have it and attach it to your audio cable. It works best if you have one near each end of the cable. it's called a clamp-on ferrite bead and is just a clip with iron ferrite in the middle. Since i'm new I can't post a link buuuut what I can do is tell you the keywords to look up on google for the ehow link: cable magnets eliminate emi . enjoy!
Click to expand...
Click to collapse
http://www.radioshack.com/product/index.jsp?productId=3012599
Dankorzon, is this what you're talking about? If so I'm going to go get some tomorrow. I'm having this feedback issue too, but it is only when the car charger is plugged in. But I'd love to get rid of that sound. Drives me crazy.
SOLVED: I used a ground loop isolator
I posted earlier that I had the whining noise in my car even with the engine off. So it wasn't related to an alternator issue. I use a Blitzsafe (blitzsafe.com) device to add a line level input jack to my Honda Accord's stock radio interface. It works well with all my other devices except the Evo 4g LTE. This past weekend I did a little tinkering and noticed that if I pulled the RCA jack on one channel (left or right) every so slightly so the ground tabs weren't touching the noise disappeared. With only one channel connected the noise is not present. I'm not sure why the noise is present with both channels connected but it definitely pointed to a ground loop problem. I did some research in audio forums and some said that a wire could be jumpered so the RCA ground touches the receiver chassis and that would solve the problem. Unfortunately that did not do anything. I touched several different grounding points near the receiver but the sound was always present.
I went to Best Buy and purchased this: http://www.bestbuy.com/site/Fierce+...36.p?id=1218186610567&skuId=9855136&st=ground loop&cp=1&lp=1 It works great. For whatever reason the EVO 4g LTE's DAC must be sensitive or not have the right filter to block the ground signal. This explains why the Kensington product also works.
I also solved my headset issue. I can confirm that older corded Plantronic headsets will not work well with the EVO. The EVO distorts the speaker in the headset. I'm pretty sure it's because it sends lower bass frequencies than the speaker can handle. Only solution was to use a newer headset.
Thanks all for your help.
phiphiJR said:
http://www.radioshack.com/product/index.jsp?productId=3012599
Dankorzon, is this what you're talking about? If so I'm going to go get some tomorrow. I'm having this feedback issue too, but it is only when the car charger is plugged in. But I'd love to get rid of that sound. Drives me crazy.
Click to expand...
Click to collapse
That is what he is talking about, but that is NOT what the kennsington device is. Google "ground loop isolator" for info on what the kennsington is, it is NOT simply an aux cord with ferrite beads on it.
I've got the same problem in my car. This only happens when plugged into the charger. I'm going to try a ground loop isolation device which will arrive sometime next week.
I guess I don't understand why the phone would only do this when no music is playing though. It makes me think maybe a patch could solve the issue if HTC knew what the issue was.
I've got an aux input in my car, and today when I tried plugging in my GSIII, I got met with a faint but annoying whistling sound underneath my music.
It stops if there's no sound being sent over the wire, but the moment a notification (or music) starts playing, it comes up.
Car worked fine with my DX, and still works fine with my friends' iPhones, but I get the stupid sound with my brand new galaxy siii. Oddly enough, it works fine with headphones.
any ideas guys? I'm kinda stumped.
Search ground loop isolation. You are getting dirty power to your phone.
Sent from my SPH-L710 using xda premium
none
Do you have the phone charging through the cigarette lighter? You can get ground noise from there, and it will be transmitted through the phone to your stereo.
Hm. Let me try again without it charging, but that's strange. Why did my old DX not experience this?
Assuming that's the issue - will a different cable solve the problem?
edit: So I checked the phone without plugging it into the charger. Still get a whistling noise. It's really more like a high pitched hum. I notice that if I don't plug the plug in all the way it doesn't happen (but I think I only get one channel).
I'm getting the same thing, and it's driving me crazy. At first I thought my brakes were going bad in my car!
I've tried different audio players and apps, but it still always get the noise. The phone is not charging, and I did not get this with my old captivate either.
Any ideas?
Doesnt happen in my Porsche. I'm using Bluetooth audio though.
Sent from my SGH-T999 using Tapatalk 2
Thats strange. I will get that when charging, but only while nothing is playing.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
I am having the same issue. First time experiencing it though; never heard it with the iPhone, HOX, or NS
I'm using a line in cable, and when i jiggle it, i can hear the noise change tone at the same time. I have a feeling it might be because it's a regular stereo cable and the microphone combo jack on the phone is not working right with it. But that's just a guess.
It's pretty annoying and its making the phone unusable as a music player.
Happens in my Lamborghini (Dodge Caravan) when using a MP3 player. Usually, if I run my hand down the cable it clears as though it's some kind of static build up in the cable.
Sent from my Transformer TF101 using xda premium
try flipping the cable (putting the aux in side into the phone and the phone side in the aux in) it happens to me sometimes and if I flip the cable it clears it out I couldn't tell you why though. also make sure there isn't any dust in the ports or on the cable ends.
That noise you hear is most likely due to the electrical system in the car. I rent cars all the time for work and never know the shape the electrical sys is in so to resolve the issue I bought a Kensington Cable from amazon and now have CD quality sound from any music app including pandora & spotify.
Hope this helps.:cyclops:
rmelendez3 said:
try flipping the cable (putting the aux in side into the phone and the phone side in the aux in) it happens to me sometimes and if I flip the cable it clears it out I couldn't tell you why though. also make sure there isn't any dust in the ports or on the cable ends.
Click to expand...
Click to collapse
Unfortunately, my cable is RCA on one side (L+R channels split) and regular 3.5mm on other.
nyciz said:
That noise you hear is most likely due to the electrical system in the car. I rent cars all the time for work and never know the shape the electrical sys is in so to resolve the issue I bought a Kensington Cable from amazon and now have CD quality sound from any music app including pandora & spotify.
Hope this helps.:cyclops:
Click to expand...
Click to collapse
Not sure what you mean by "the electrical system" and the "shape" of it. Could you clarify? As I said, I have no problems with other devices in this car.
I would usually suspect something wrong with the car, or maybe a ground loop, but I can plug in my Galaxy S (Captivate) or iPod with the same cable, same everything, just switching out the phone, and the noise goes away.
The way the noise cuts in and out between songs, and when I close the music app, it seems to only happen when the audio chip is getting a signal or is being energized. This is making me think that it may just be a noisy chip :crying:
I was on conf call with SGS3 plugged to AUX, no power charging was going on. And either noise canceling didn't work, or noise was getting in thru AUX line to receiving end. I didn't have problems listening, but ppl on the other end complained, and I had to mute the mic.
:crying:
cashyftw said:
doesnt happen in my porsche. I'm using bluetooth audio though.
Sent from my sgh-t999 using tapatalk 2
Click to expand...
Click to collapse
sorry! Could you speak up please? I couldn"t hear you over the sound of your e-penis
I am having the same problem. My HTC Thunderbolt never had this problem. Same car and cables, I get the hissing and popping until I play something. Then it goes away until I stop the music and then it comes back again. Weird and disappointing.
The problem comes from the 4-pin (TRRS) audio jack in the GSIII combined with presumably bad grounding in my 2007 Honda Accord, or the Aux adapter.
I fixed it with a simple DIY solution. I cannibalized a TRRS headphone jack and bought a TRS (3-pin) port from radioshack. I clipped off the jack with a generous portion of wire, then stripped them and cleaned them from their insulation (they are covered in insulating dye).
I connected 3 of the wires to the TRS connector, and taped the whole thing up. No more hum.
Also known as Road Noise. Where the power cable and audio input are too close to each other. Electrical current emits a small magnetic field which will hinder audio quality and promote road noise from the alternator.
This is a very typical senario in car audio install, when you run the power cable and rca right next to each other.
this buzzing noise happens to me every time i drive my car for the past 3 years:
solution: turn down the car volume. if you keep your car volume half-way, then you wont hear it as much, or you wont hear it at all.... you can make the phone volume as loud as you want though. also, as you accelerate faster, the noise gets louder. watch, try it.
EDIT: Moderators, please feel free to move this thread to the troubleshooting/Q&A forum. I didn't realize it might belong there... Sorry!
OK so I got a new HTC One and so far I love it in all aspects except... the following:
With a headset plugged in to the headphone jack (earbuds with in-line mic and button) any amount of jostling or rotation of the plug in the jack causes my phone to skip songs, stop playing music, and begin redialing the last call in my call log. This issue makes the phone practically unusable for listening to music, as even the slightest shaking of the plug (i.e. from phone in pocket while walking, movement of headphone cord from turning head left or right while sitting still, etc) causes problems.
I thought it was a problem with the individual device I got so T-Mobile was nice enough to send me a new HTC One...
And it has the exact same problem.
I have tried several different headsets with button and mic. Notably, all of the headsets with mic I've tried all work flawlessly on all other devices.
Has ANYONE had this problem?
Note that I Intend to record a video of the problem for evidence, but I'm pretty convinced its a design flaw in the HTC One.
At this point I have all intention to go with a different device, as much as that pains me to say (probably the Xperia Z)
EDIT2: After some experimentation, I have discovered the problem. It is a ridiculous design flaw on the part of HTC. I will post pictures later along with videos. In theory it can be remedied with a new set of headphones of a certain style or possibly some electrical tape or other insulating material, but I really don't think that should be a requirement of using the HTC One.
EDIT4: See here for my post on reddit with a description of what I believe to be the cause of this problem: http://www.reddit.com/r/htcone/comments/1k6ia1/illustration_of_a_design_flaw_with_the_htc_one/
And here is a link directly to the photo album on imgur with descriptive captions: http://imgur.com/a/uXvn3
i just picked up a set of ear bud n mic headphones today and played music and did voice commands with it today and had no issues but it was a short period of time...i will try to replicate ur issue and report back later today.
its a issue with something of htc software i believe. it was doing similar with my skullcandy ink'd second gens.
i looked into it a lil but not alot. but it seems only certain headset/earbud combos work properly. i really dont know why theyd have it like that. but for me i had to play around with the mic button and what not.
It's the head set I have earbuds and soul, soul works fine
Sent from my HTC One using Tapatalk 2
I've run into this problem on other phones before, but it was always the 3.5mm jack. Either it was tarnished or the case/jack design combo was causing it to not seat fully. Check very closely that the jack is fully seated and maybe try with another set before condemning the jack in the phone as bad.
I believe I have diagnosed the cause of this and other problems. Please see the OP for links to photo album with descriptions.
I purchased mine back in june and never had this problem. Ive used 2 pairs of headphones with the device (some $5 kyocera promo headset from when I worked at metropcs and a pair of Sony MDR-XB500). Only thing I could think of would be faulty software/hardware (phone jack) combination.
LifeEscalade said:
I purchased mine back in june and never had this problem.
Click to expand...
Click to collapse
yeah , it's right.
I have this very issue on my HTC one Since my wife's HTC one doesn't experience it with the same headphones I just concluded it was some tolerances that were off on mine I mainly use Bluetooth so I didn't feel it was a big enough issue to return. I had originally searched to see if it was a widespread issue, but could not find any others who had it.
I have not had the problem, either with a headset or an AUX cable I use for my car stereo. The headset jack on mine fits very snug and the plug does not touch the housing except maybe a very small area where the lip is metal.
Hi guys.
I have had this issue for awhile and have put it off thinking it was a headphone cable issue but it's not.
I have already tried cleaning with contact cleaner and rubbing alcohol.
My issue is that my phone will trigger "Google voice" search just by slight movement at the cable /jack junction. This is insanely annoying considering I bought this phone due to its audio prowess.
It will also automatically pause or change tracks with the same jack/cable movement.
I am Canadian and bought this from HK via ebay. I am one of those who almost never bother with warranties but obviously would seeing as I spend near a grand on this thing. How would I begin on a warranty claim?
Thanks.
Seems to be a common issue, unfortunately. I haven't really found a way to fix it yet.
How new is your device?
What type of finish is on the end of the cables ends?
I use this cable with almost no issue. Once in a while it will trigger voice when I plug in. But that's all.
https://www.amazon.com/gp/aw/d/B00F9KUF7O/ref=yo_ii_img?ie=UTF8&psc=1
I've also got a phone from HK prior to release in my country and have been struggling with this.
It looks to me that this is because of the way the phone detects your device. I've that the headphones that comes with the device and other earbuds works with no problems, but my bigger M40X for example have this.
The best solution I've found so far is this: plug it and leave it (not moving it at all) for about 10 seconds. After this the problem seems solved most of the time.
Unplugging and re plugging it several times also worked sometimes at the begging, but it was very frustrating and probably not so good for the longevity of the jack.
I'm actually about to make a factory reset for other reasons, but I'll post here if it makes any difference.
UPDATE: The factory reset did not fix the issue, but I have the impression it's triggering the high gain with my m40x as now I've noticed increased volume and no difference to when doing that trick of plugging the detachable cable first to the phone and then to the headset. Don't ask...
I had this issue a few times on my previous phone (Droid Maxx) when in the car, as I was plugging it in (usually when there was turbulence). I thought it was due to the tip of the plug contacting one of the other contacts in the jack. See this link for what the different parts of a headphone/mic combo plug or jack are. I'm not sure if your cable has all of those, but if the wrong ones touch maybe it triggers the mic to listen. Or internally your cable may be shorting between the different signals. Just spitballing ideas.
You know what guys, a friend of mine really liked my phone and got one as well. So when he got it I asked to him to test the jack problem with my headphones and it was simply not there. I do suspect this is a problem with the device. I'll try to get in touch with LG a second time for support (as the first time they asked me to get back to the country where I got it, the Philippines, and this is not really an option).
MrCogito said:
I've also got a phone from HK prior to release in my country and have been struggling with this.
It looks to me that this is because of the way the phone detects your device. I've that the headphones that comes with the device and other earbuds works with no problems, but my bigger M40X for example have this.
The best solution I've found so far is this: plug it and leave it (not moving it at all) for about 10 seconds. After this the problem seems solved most of the time.
Unplugging and re plugging it several times also worked sometimes at the begging, but it was very frustrating and probably not so good for the longevity of the jack.
I'm actually about to make a factory reset for other reasons, but I'll post here if it makes any difference.
UPDATE: The factory reset did not fix the issue, but I have the impression it's triggering the high gain with my m40x as now I've noticed increased volume and no difference to when doing that trick of plugging the detachable cable first to the phone and then to the headset. Don't ask...
Click to expand...
Click to collapse
Funny you mentioned the volume increase. That is a trick I learned from someone in another thread as the standard gain setting for low impedance headphones was too weak. That made a vast improvement in volume and was a life saver because I bought this phone specifically for its audio abilities.
As for the Google voice thing the only thing I found that worked was going under apps and disabling the Google app which is ridiculous considering it kills Google on tap which is a big feature of android.
I am pretty sure this is being trigggered by the jack somehow engaging a contact. Explains why it's triggered when I move.
Drives me nuts. Read somewhere that MM fixed this but not for me. I will try enabling Google app and uncheck all the voice options and see if this helps.
You know what, after struggling long with this I've finally gathered the balls to buy a headphone jack part and replace it myself. I've done it with my old Nexus 4 (the jack actually broke there).
It takes a while to arrive, but I'll perform the change and post the result here.
Where I got it from:
http://www.ebay.com/itm/122034019463
I sometimes have the voice recognition and volume issue, but for me it appears to be an issue with my headphones (Bose MIE2i). I don't have the issue with any other headphone or cable. I have this issue when I fiddle with the in-line controls of the Bose (both this and the 1st pair of Bose). My belief was that it was due to poor shielding of conductors in the controller or shoddy wiring connections.
Did u ever solve the problem with replacement? Im having issues with left and right volume. Like a shorted cable, but bought new phones & still doing that.
Just in case anyone is still suffering from this problem, I made a discovery today. I've replaced the headphone jack in my v10 3 times thinking that they're just ****ty headphone jacks that break all the time, but in my case at least the fault wasn't the contacts inside the jack itself. I found that my problem was actually related to the push-down connector that clips to the motherboard. I had a hunch that keeping the phone in my pocket with headphones connected was slowly rocking it back and forth and would eventually disconnect it. In order to add more clamping pressure to the connector, I put 3 small slices of electrical tape on top of it before screwing the back down. On my walk home today, the left earphone would disconnect with literally every step that I made. After putting the electrical tape in the problem was solved.