I have an Arnova 10 G2. On the back it says 101c (first 10 in big size letters, followed by 1c in small size letters).
Could anyone please let me know if this is a Gen 8 or Gen 9 device.
Hey diablo009!
Why don't you have look at their website:
http://arnovatech.com/
Especially the contact data:
http://arnovatech.com/corporate/contact_us.html?country=ua&lang=en
If i got it right Arnova is the budget series of Archos.
In fact these devices look like Archos tablets but i guess they have different electronics inside (Asian low cost SoC's based on Cortex-A8).
EDIT:
I just had a short look into the firmware update file for Arnova 10 G2 and it seems they are using a RK29xx SoC on the mainboard.
These are low-budget ARM SoC's built by a chinese manufacturer:
http://www.rock-chips.com/index.php?do=prodnew
Unfortunately these chips are not very well documented.
There's another forum where you might find some help:
http://www.slatedroid.com/
There are G1 and G2 devices... AFAIK this has nothing in common with the G8 or G9 series distributed by Archos.
EDIT:
Around the globe you may find even devices like these mentioned here:
forum.xda-developers.com/showthread.php?p=18808961
Regards,
scholbert
Thanks scholbert. I should've made some research before buying this. But one good thing is that my core intention was as a 10" book reader. So that part is good.
I went in their site a few times, but couldn't really make out. I'll try looking more tonight.
Edit: One positive thing it that there was this app called "arctools" that I could use to flash the rooted version of stock rom. Atleast something, better than being stuck with nothing.
pretty sure arnova is Gen 8 based, but I think it may run gingerbread instead of froyo. I don't tthink the arnova series for Gen 9 has been released.
Hi butterflygirl!
butterflygirl said:
pretty sure arnova is Gen 8 based, but I think it may run gingerbread instead of froyo. I don't tthink the arnova series for Gen 9 has been released.
Click to expand...
Click to collapse
Please read my post... these devices use different hardware inside.
We should be careful not to confuse people again and mix everything up.
Trust me, i looked into the firmware update file (update.img) from their website.
Completely different low level-structure and content compared to the gen8/9 AOS files.
Regards,
scholbert
scholbert said:
Hi butterflygirl!
Please read my post... these devices use different hardware inside.
We should be careful not to confuse people again and mix everything up.
Trust me, i looked into the firmware update file (update.img) from their website.
Completely different low level-structure and content compared to the gen8/9 AOS files.
Regards,
scholbert
Click to expand...
Click to collapse
It was not my intent to imply that the hardware was the same, merely to point out that this was released during the gen 8 releases and not gen 9. I would refer the original poster here for more info on their device .
http://forum.archosfans.com/viewforum.php?f=87&sid=defea523d29b6843c48a9b3cf9d55795
butterflygirl said:
It was not my intent to imply that the hardware was the same, merely to point out that this was released during the gen 8 releases and not gen 9. I would refer the original poster here for more info on their device .
http://forum.archosfans.com/viewforum.php?f=87&sid=defea523d29b6843c48a9b3cf9d55795
Click to expand...
Click to collapse
O.K. i see... so i didn't get you
Thanks for the link!
Cheers,
scholbert
Related
Hi Everyone,
Not sure if this is the right place (did not find a specific ZTE tablet forum - but i guess all the chinese tablets are pretty much the same).
I recently got this device, It's pretty nice, not strong or anything (like the nexus 7 i initially wanted) but it was given to me for free.
My only problem with the device is the operating system version, android 4.2, I have also nexus 4 device and going back to 4.2 feels a bit how to say, laggy, old fashioned.
Can someone guide me please / link and also explain if it's possible somehow to get this tablet to android 4.4 or even 4.3.
Thanks you very much,
Anyone knows maybe? even a general answer not only to the zte tablet, regarding the chinese tablets and firmwares.
Tricepz said:
Anyone knows maybe? even a general answer not only to the zte tablet, regarding the chinese tablets and firmwares.
Click to expand...
Click to collapse
I am hacking this same tablet right now. ZTE is just a clone brand. Really, it is a Rockchip rk3188 processor, and some GPU. I hope this helps you find the right ROM. The bootloader is already unlocked, so that's not going to be a problem. Download this to identify your HW further:
https://play.google.com/store/apps/details?id=com.Bfield.CpuIdentifier
Best of luck!
Hey XDA Community,
after 3 1/2 years i'll retire my Galaxy S3 and get a new phone. So far so easy.
But as a Android enthusiast, i can't just buy a new phone, it has to be a phone which offers a good hardware base for using custom roms. And what i learned in the last 3 1/2 years is that, for example, Samsungs Exynos processors are NOT a good hardware base and rom developers hate Exynos processors.
So here we come to the magic question: Which is, from a developer view, the best, and what are acceptable processor brands which allow developers to develop a rom (more precisely the "device tree") which can make use of all of the processors features and its performance?
I think the following two brands are well known among all custom rom users and don't need to be commented:
Exynos -> as described above, "the Antichrist"
Qualcomm Snapdragon -> as far as i know the Holy Grail for developers
But what about the "underdogs"? How developer friendly are the following processor brands which now appear more and more in (flagship) phones from Huawei, Xiaomi and many other smaller phone manufacturers:
MediaTek (currently used by some Acer phones)
Hisilicon Kirin (for example used by the Huawei Ascend Mate 7, Huawei Honor 6 ...)
Nvidia Tegra (for example used by the new Google Pixel C tablet)
Intel Atom (for example used by the Asus ZenFone 2)
I'm excited about your experience with and recommendations for these "underdogs", especially if you are a developer!
Best regards,
Mika
Mediatek - Not developer friendly. Not easy to create custom ROMs for this brand of SoC.
Never heard of Hisilicon Kirin SoC. Not too sure about Nvidia Tegra.
No one else interessted in this issue?
Mika83AC said:
No one else interessted in this issue?
Click to expand...
Click to collapse
Only qualcomm.
Hisilicon is a no go. No sources.
Sony + Qualcomm is the best choice.
Sent from my Nexus 5 using XDA Free mobile app
I added the "Intel Atom" processors to the list of choice. Perhaps a little late, but i think it's not unimportant.
Mika83AC said:
I added the "Intel Atom" processors to the list of choice. Perhaps a little late, but i think it's not unimportant.
Click to expand...
Click to collapse
Intel is a no go as well since it's pretty new. As for your choice of SoC, it really depends on your needs. If you want to use a custom ROM, you're best off with Qualcomm. Otherwise most SoC will work fine for you. I own a Galaxy S6(Exynos SoC), unknown China phone(MediaTek SoC) and a HTC M8 HK edition(Qualcomm SoC). I can use them all just fine in my daily life.
Mika83AC said:
Hey XDA Community,
after 3 1/2 years i'll retire my Galaxy S3 and get a new phone. So far so easy.
But as a Android enthusiast, i can't just buy a new phone, it has to be a phone which offers a good hardware base for using custom roms. And what i learned in the last 3 1/2 years is that, for example, Samsungs Exynos processors are NOT a good hardware base and rom developers hate Exynos processors.
So here we come to the magic question: Which is, from a developer view, the best, and what are acceptable processor brands which allow developers to develop a rom (more precisely the "device tree") which can make use of all of the processors features and its performance?
I think the following two brands are well known among all custom rom users and don't need to be commented:
Exynos -> as described above, "the Antichrist"
Qualcomm Snapdragon -> as far as i know the Holy Grail for developers
But what about the "underdogs"? How developer friendly are the following processor brands which now appear more and more in (flagship) phones from Huawei, Xiaomi and many other smaller phone manufacturers:
MediaTek (currently used by some Acer phones)
Hisilicon Kirin (for example used by the Huawei Ascend Mate 7, Huawei Honor 6 ...)
Nvidia Tegra (for example used by the new Google Pixel C tablet)
Intel Atom (for example used by the Asus ZenFone 2)
I'm excited about your experience with and recommendations for these "underdogs", especially if you are a developer!
Best regards,
Mika
Click to expand...
Click to collapse
If you want the most development, nexus devices will always have the best open source support. If not a nexus, stick with qualcomm . all the other socs have less open source support and therefore fewer developers willing to work on them. That doesn't mean you won't get custom ROMs (zenfone 2 is going well), but the pool of people able to do real development on it is tiny...
nVidia also releases open sourced images for it's devices...
check out
Cheers
dirlan2001 said:
nVidia also releases open sourced images for it's devices...
check out
Cheers
Click to expand...
Click to collapse
nvidia = binary-hell
Sent from my Nexus 5 using XDA Free mobile app
popthosegaskets said:
Intel is a no go as well since it's pretty new. As for your choice of SoC, it really depends on your needs. If you want to use a custom ROM, you're best off with Qualcomm. Otherwise most SoC will work fine for you. I own a Galaxy S6(Exynos SoC), unknown China phone(MediaTek SoC) and a HTC M8 HK edition(Qualcomm SoC). I can use them all just fine in my daily life.
Click to expand...
Click to collapse
My question is only meant to find the best choice/choices for using custom roms.
You're right, if just looking for a new phone, the SoC is not the most important to look for.
codeworkx said:
nvidia = binary-hell
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I guess this means "no fun for the devs"?
Mika83AC said:
I guess this means "no fun for the devs"?
Click to expand...
Click to collapse
Depends on how you define "fun".
Sent from my Nexus 5 using XDA Free mobile app
codeworkx said:
.... Sony + Qualcomm is the best choice ...
Click to expand...
Click to collapse
Hey @codeworkx, just one question regarding your sony recommendation.
What do you say about this: http://forum.xda-developers.com/z3-compact/general/loss-drm-keys-t2890936
If Sony offers you good conditions / sources / binarys and whatever to develop a custom rom, but kills or at minumum downgrades many of the phones features when unlocking the bootloader (camera quality, screen quality, sound quality ...) would you buy this devices at all?
Or is there a way arround this bootloader mess which just isn't known in the thread linked above?
Regards,
Mika
I have a Vertu Aster P Chinese clone, purchased from here https://www.luxuryvertu.cn/ProID473.html and since buying it, I've been desperate to try and update it from the Vertu-themed Android 6.0 Marshmallow that it came with.
They lie about the phone specs on their site that I got it from. It doesn't run Android 8.0 and it doesn't have a Qualcomm Snapdragon 660 SoC .The genuine Vertu Aster P runs on Android 9.0 Pie, which is what this clone should have really come with, being a late 2019 phone and to stay true to the genuine Vertu. Trouble is, being a Chinese replica, and having an MTK SoC, there is no support for it. The manufacturers refuse to provide me with the kernel source code, so I'm at a dead end in terms of any Android development.
One thing I did notice is that the 'Device Info' app shows the device as being a 'gionee6755_66_m'. See the second attachment that I've uploaded. Does this mean anything to anyone? Is it the model of a specific Gionee handset? Could this be a clue as to what the Chinese clone makers based this phone off? If so, I do know of a few threads here and there on XDA related to Gionee development.
Also, in the third screenshot attachment that I've uploaded, you can see that the icons for data connection and aeroplane mode are rubbing up against each other, suggesting that someone has made a 'quick and dirty' fix to try and get both of the icons to fit the width of this phone's screen. Which also might suggest that this ROM was actually pulled from another device. Any thoughts?
Chris
@chris8189
Note that you on every Android device can fake its brand and/or model: you can even make it think to be an Apple iPhone 11 Pro. You also can fake its version of Android OS. What you can't (easily) change are descriptions of installed hardware components .
So one can't really say your device is a Vertu Aster P or Gionee6755_66_m or whatever.
What I think happened is that you got screwed.
jwoegerbauer said:
@chris8189
Note that you on every Android device can fake its brand and/or model: you can even make it think to be an Apple iPhone 11 Pro. You also can fake its version of Android OS. What you can't (easily) change are descriptions of installed hardware components .
So one can't really say your device is a Vertu Aster P or Gionee6755_66_m or whatever.
What I think happened is that you got screwed.
Click to expand...
Click to collapse
I wasn't 'screwed' as such. That's a bit of a crass term. The device is of premium quality, feels as heavy as a genuine Vertu and really does look the part. And it performs perfectly fine on Android 6.0. The phone is fast and responsive and does whatever I need it to do.
That said, it wouldn't have caused them any more distress in putting Android 9.0 onto this phone. The MT6755 Helio P10 chipset that this clone has is more than capable of running 9.0. Why they didn't is a mystery to me.
Hi,
I own the Teclast P10HD https://www.teclast.com/en/zt/P10HD/
I want to root it, and if possible install Android 10, I have searched the forums but found nothing about it (There's a thread about the older P10 which has different hardware).
Any help is highly appreciated.
I've been trying to root the device but traditional methods don't work as the boot partition can't be unlocked, also the key method used for other devices made by the same chipset manufacturer doesn't work either. There's a flashing tool provided by the manufacturer but it only works on Windows and I don't own a copy so I couldn't try it. Let's hope someone is able to unlock the device as the hardware is pretty decent
This device has something odd.
Antutu reports the same speed of a mate pad t8 and many other tablets, but it's not very responsive.
I think android is not very optimized for this unisoc, what do you think?
It get much nicer with poco launcher and mi camera but still it looks a bit slow for a 2020 device
suoko said:
This device has something odd.
Antutu reports the same speed of a mate pad t8 and many other tablets, but it's not very responsive.
I think android is not very optimized for this unisoc, what do you think?
It get much nicer with poco launcher and mi camera but still it looks a bit slow for a 2020 device
Click to expand...
Click to collapse
you need to bear in mind that it has only 3 GB RAM, which is not ideal for a 2020 android device. I use it mainly for internet relating activities and social network apps. I installed some lite games and they work fine. Given its extremely low price, its value is good.
Did you manage to find any custom ROM that works on it?
EstrellaAzul said:
I've been trying to root the device but traditional methods don't work as the boot partition can't be unlocked, also the key method used for other devices made by the same chipset manufacturer doesn't work either. There's a flashing tool provided by the manufacturer but it only works on Windows and I don't own a copy so I couldn't try it. Let's hope someone is able to unlock the device as the hardware is pretty decent
Click to expand...
Click to collapse
Try this
https://www.getdroidtips.com/root-teclast-p10-hd/
ghassan haddad said:
you need to bear in mind that it has only 3 GB RAM, which is not ideal for a 2020 android device. I use it mainly for internet relating activities and social network apps. I installed some lite games and they work fine. Given its extremely low price, its value is good.
Did you manage to find any custom ROM that works on it?
Click to expand...
Click to collapse
The mate pad has 2gb so that's not the question.
The p10hd can run everything, it gives no problems but generally speaking it is not that fluid.
I know Huawei or xiaomi can probably add some optimizations here and there, maybe a version 10 of android and a teclast custom launcher could help it. Let's see if they prefer to launch new devices or are now working on those they already produce to experiment a bit.
However, unisoc is pretty good, now that chromeos is getting lighter, it would be nice to see it on this soc
suoko said:
unisoc is pretty good, now that chromeos is getting lighter, it would be nice to see it on this soc
Click to expand...
Click to collapse
Sorry but I didn't get this line. What is Unisoc? and what does chromium have to do with it?
By the way, does Teclast usually upgrade the software or are we gonna stuck to what we got?
ghassan haddad said:
Sorry but I didn't get this line. What is Unisoc? and what does chromium have to do with it?
By the way, does Teclast usually upgrade the software or are we gonna stuck to what we got?
Click to expand...
Click to collapse
No idea on teclast upgrade policies but I guess we're OK considering that m16 is still on android 8.
Unisoc is the cpu soc brand. It's quite cheap but not bad at all, I was only guessing how chromeos would run on it. Chromeos includes android and Linux apps, it's going to be an os we will find very often in the next years. I would try a color e-ink too in it, to make cheap long-lasting edu tools available to a huge lot of people: add the embedded 4g/5g connection support and you get wherever you want
https://forum.hovatek.com/thread-32287.html
Try this.
Hello, I still have my Mi Pad 2 (16GB) laying around and i've been thinking about replacing its battery and then install some sort of alternative OS such as Ubuntu, Chrome OS, Android x86 etc... I saw some topics here and on other websites but only a few people actually got those OS's working but didn't provide any instructions whatsoever.
Is someone still interested in this device? If so, any help and support would be appreciated.
Yes, I am still using it. I had already replaced the batteries once.
Trying to find a good custom ROM.
ksmukta said:
Yes, I am still using it. I had already replaced the batteries once.
Trying to find a good custom ROM.
Click to expand...
Click to collapse
Is it easy to replace the battery? I'm thinking about getting a new one. Btw, what ROM are you using at the moment?
Yes I am ，but i flash win10 2004 . and Improved heat dissipation，Now, the only issue is the shortened battery standby, but other than that I'm pretty happy with it!
eastwoodnet said:
Yes I am ，but i flash win10 2004 . and Improved heat dissipation，Now, the only issue is the shortened battery standby, but other than that I'm pretty happy with it!
Click to expand...
Click to collapse
I'm also willing to try Windows 10 2004, but a lightweight version because my Mi Pad 2 is the 16GB version. How did you install that on yours? With a USB dongle with USB stick and keyboard like a regular computer?
Also, how did you improve heat dissipation?
By the way, does anyone know if it's possible to desolder the eMMC and replace it with a high capacity one? Like 64 or 128GB?
I still use my Mi Pad 2, mainly for reading. But been looking into bringing up Android N to this tablet (there is at least one Intel Atom nougat kernel source available, which might come in handy) and also around 3-4 different tablets running Nougat on Intel Atom (so we can try to use those blobs). Bliss OS is an option as well (as per the guide(s) on this forum). One approach could be to assist the Bliss OS team in squashing the bugs for the Mi Pad 2. If you want to discuss this further, feel free to let me know.
Palm Trees said:
I still use my Mi Pad 2, mainly for reading. But been looking into bringing up Android N to this tablet (there is at least one Intel Atom nougat kernel source available, which might come in handy) and also around 3-4 different tablets running Nougat on Intel Atom (so we can try to use those blobs). Bliss OS is an option as well (as per the guide(s) on this forum). One approach could be to assist the Bliss OS team in squashing the bugs for the Mi Pad 2. If you want to discuss this further, feel free to let me know.
Click to expand...
Click to collapse
I'm a bit "desperate" to have a good OS available for this device because otherwise it's basically a paper weight for me. Stock MIUI was always flawed and slow and in my case Windows is pretty limited since I only have 16 gigs. And yeah, I'm available to discuss this further, it would be a pleasure.
joaocandeias said:
I'm a bit "desperate" to have a good OS available for this device because otherwise it's basically a paper weight for me. Stock MIUI was always flawed and slow and in my case Windows is pretty limited since I only have 16 gigs. And yeah, I'm available to discuss this further, it would be a pleasure.
Click to expand...
Click to collapse
Have you ever tried the AOSP rom (it's seems to be a developer rom from Xiaomi) for Mi Pad 2?
I'm currently using MIUI 9.6.2.0 Mod from LVware it's working fine.
The only Android N kernel source for Cherry Trail devices available is the Grandstream GXV3380 http://www.grandstream.com/support/resources/?title=GXV3380 (scroll down to GXV3380 GNU GPL). Grandstream writes its rom is Android 7 based, so the kernel source must be Nougat based (I only write this, because a Cherry Trail nougat source has never been released, so this is huge. I even think it is able to compile based on the archive contents). I only came by this by searching for Cherry Trail devices on Geekbench Browser. Would like to compare this kernel source to the Lollipop Mi Pad 2 one.
In terms of an Android Marshmallow Cherry Trail kernel source, I could only find the Panasonic Toughpad Android 6 (PANASONIC FZ-A2A): https://panasonic.net/cns/oss/tabletcomputer/FZB2D001.html .. It's worth mentioning that Amazon has made the Amazon Echo Show (2nd Gen) kernel source available as well (5.5.3.9-20200618.tar.bz2), but I think it's Lollipop based: https://www.amazon.com/gp/help/customer/display.html?ie=UTF8&nodeId=201626480 (scroll down to Echo Show (2nd Generation). The Nougat kernel source might be released, as the latest software version available is 655636620 (https://www.amazon.com/gp/help/customer/display.html?nodeId=201602210) and according to Wiki the 6.x.x.x builds are Nougat based. I know it's confusing, you can read more about it here: https://en.wikipedia.org/wiki/Fire_OS#cite_note-4
In terms of blobs, there are plenty of devices to borrow from. Medion has 4 tablets that have been updated from Lollipop -> Marshmallow -> Nougat. The same with Getac, which has two models the MX50 and the ZX70. Lenovo has a few Cherry Trail devices as well upgraded to Nougat, which can be borrowed from.
Palm Trees said:
Have you ever tried the AOSP rom (it's seems to be a developer rom from Xiaomi) for Mi Pad 2?
I'm currently using MIUI 9.6.2.0 Mod from LVware it's working fine.
The only Android N kernel source for Cherry Trail devices available is the Grandstream GXV3380 http://www.grandstream.com/support/resources/?title=GXV3380 (scroll down to GXV3380 GNU GPL). Grandstream writes its rom is Android 7 based, so the kernel source must be Nougat based (I only write this, because a Cherry Trail nougat source has never been released, so this is huge. I even think it is able to compile based on the archive contents). I only came by this by searching for Cherry Trail devices on Geekbench Browser. Would like to compare this kernel source to the Lollipop Mi Pad 2 one.
In terms of an Android Marshmallow Cherry Trail kernel source, I could only find the Panasonic Toughpad Android 6 (PANASONIC FZ-A2A): https://panasonic.net/cns/oss/tabletcomputer/FZB2D001.html .. It's worth mentioning that Amazon has made the Amazon Echo Show (2nd Gen) kernel source available as well (5.5.3.9-20200618.tar.bz2), but I think it's Lollipop based: https://www.amazon.com/gp/help/customer/display.html?ie=UTF8&nodeId=201626480 (scroll down to Echo Show (2nd Generation). The Nougat kernel source might be released, as the latest software version available is 655636620 (https://www.amazon.com/gp/help/customer/display.html?nodeId=201602210) and according to Wiki the 6.x.x.x builds are Nougat based. I know it's confusing, you can read more about it here: https://en.wikipedia.org/wiki/Fire_OS#cite_note-4
In terms of blobs, there are plenty of devices to borrow from. Medion has 4 tablets that have been updated from Lollipop -> Marshmallow -> Nougat. The same with Getac, which has two models the MX50 and the ZX70. Lenovo has a few Cherry Trail devices as well upgraded to Nougat, which can be borrowed from.
Click to expand...
Click to collapse
Yep, I've tried the AOSP ROM but it gets really slow after a bit. It's almost impossible to multitask because it can't handle more than 2 apps. Never heard about that MIUI ROM though, do you have a link for it? is it good?
About the sources i'll be completely honest. I have limited expertise on this subject but seeing all that makes me think that it's not that impossible to make a good ROM for our device (am i wrong?), so what's limiting us? People with knowledge? More sources? What's the next step?
eastwoodnet said:
but i flash win10 2004
Click to expand...
Click to collapse
does the touch keyboard move content up now?
hi my mipad 2 get error bootloader 03, and have option to press vol up to boot normal. after that, the mipad always turn off like drain battery but when I plug the charger is already full. can any one help me? thanks
Tr4sHCr4fT said:
does the touch keyboard move content up now?
Click to expand...
Click to collapse
holy ****ing **** I know exactly what you mean. windows 8 does it. windows 8 is great.
i've been messing with 8 on it, and it's literally orgasmicly good. 10 is still my main OS because some drivers are missing, but the whole of it works really well.
oh, and using gibson's inspectre.exe to disable spectre and meltdown protections was THE thing to finally get the performance that seemingly disappeared. thats because it did disappear! also seems to help with RAM usage enormously
and I cut the plastic insulator between the motherboard and the rear case. filled in the gap with a thermal pad pretty much right on the CPU. 2.24 GHz base clocks now baby!
and this CPU is around a 7W TDP for anyone wondering. intel says 2W SDP, I say 4W SDP is probably closer to reality. 2W is at the base 1.44 GHz tho, but mine is at 2.24 GHz all the time.
I still have my 2GB RAM 16GB internal MiPad2 and working with shortened battery life and some limited app functionality (G.Play doesn't work/update for eg).
I want to use it primarily as a book/manga reader as well as a media player of sorts.
I saw the recommended custom ROMs list here but any advice on which is ideal for this device based on its limited hardware?
Oni1315 said:
I still have my 2GB RAM 16GB internal MiPad2 and working with shortened battery life and some limited app functionality (G.Play doesn't work/update for eg).
I want to use it primarily as a book/manga reader as well as a media player of sorts.
I saw the recommended custom ROMs list here but any advice on which is ideal for this device based on its limited hardware?
Click to expand...
Click to collapse
i installed a light version of windows 10 on mine and it works surprising well. I have around 8gb to play with
That's cool! Performance is ok?
So would app installation then be via the Microsoft Store or can you still install via Google Play?
Are the instructions for the Windows 10 Lite flashing detailed somewhere on this forum?
joaocandeias said:
i installed a light version of windows 10 on mine and it works surprising well. I have around 8gb to play with
Click to expand...
Click to collapse
Hello,
can you really install Windows 10 on Mipad 2 2 / 16Gb based on Android?
I have a Mipad 2 2/64 based on Android, and I want to replace it with Windows 10, would you like to share the method with me?
I still use this little tablet as a second screen/device playing video's on the desk when im working on my laptop. The screen is still really nice: bright and crisp. Mine has Windows 10 installed which is barely useable, usually everything feels kinda slow, but it does work. The biggest problem was that it thermal throtteled after normal use, so what helps is if you do a cooling mod. It's not that hard, I cut a square out of the shroud thats covering the CPU and placed a thick thermal pad over the CPU so it touches the outer metal housing. This greatly improved CPU/GPU performance and solved the thermal issue. The housing doesn't even get that hot when you stress the tablet. It now plays video's no problem all day long, where it would stutter after while without the mod...
Don't expect any miracles though, it's still an Atom with a slow eMMC drive and only 2GB of RAM. Windows is just too heavy for it sometimes. A newer version of Android would probably be a better fit. What also helps is if you debloat Windows a little: https://github.com/W4RH4WK/Debloat-Windows-10
Oni1315 said:
That's cool! Performance is ok?
So would app installation then be via the Microsoft Store or can you still install via Google Play?
Are the instructions for the Windows 10 Lite flashing detailed somewhere on this forum?
Click to expand...
Click to collapse
Performance is fine i guess. I think it gave a new life to my Mi Pad 2 even though i haven't been using it lately. App instalation is via Microsoft Store of course, or via .exe installers just like a PC.
I'm wondering if it will be possible to install Windows 10X on it. That would be very cool.
As for the instructions, i used an old tutorial from the Xiaomi forums to change from Android to Windows and then I installed that Windows 10 lite from Ghostspectre using a USB stick just like a regular PC
Amin_foam said:
Hello,
can you really install Windows 10 on Mipad 2 2 / 16Gb based on Android?
I have a Mipad 2 2/64 based on Android, and I want to replace it with Windows 10, would you like to share the method with me?
Click to expand...
Click to collapse
That's right, my 2/16 Mi Pad 2 is running Windows 10.
I found the link for the tutorial. Sadly it's offline, but Wayback Machine can open it just fine, except the pictures. Surprisingly, the download link is still online too but it's pretty big (7 gigs).
If anyone needs that, i can send the two links through PM