Hi guys its been a while since I have rooted my phone and I want to install custom roms but I can't flash clockwork mod. I am using ROM manager.
The problem is my phone isn't listed on the list of devices when I try to flash. The list has -
Commtiva z71 (Boston, blaze and more)
Dell steak
Geeksphone one
Huawei ascend
Huawei ascend 2
Huawei pulse
Huawei U8220/U8230
Micromax A70
Spice MI700/Commtiva link 700 and more.
Any help?
Sent from my E310 using xda premium
Advantage MX ClockWork Mod Recovery for Acer Liquid Mini e310 [Windows Tutorial]
Greetings MeTall3d;
I've had the same issue.
I've figured out a way to flash the recovery with Clockwork Mod.
[Windows 7 Tutorial]
Important: Before starting you agree that you do this on your own will and if anything goes wrong, you are the one responsible for any trouble you might find. (i.e: your device gets bricked; errors; etc..)
Either ways this method was tested in my device without having any problem.
Instructions: (For Windows 7 Users)
Before you start: This CWM (ClockWork Mod) is meant to work on Acer Liquid Mini E310 with Gingerbread Version 2.3.3 Only (As refered by Acer-Club.ru)
1) Download: "recovery for mini.zip"
Or visit Acer-Club.ru for further details:
Go to Acer-Club.ru
I recommend browsing the website using Google Chrome.
Anyway; i translated this tutorial to a better English since Google Translator doesn't translate very well)
2) Make sure you have the updated Acer USB Drivers Installed.
Also; check in your device manager if you need the ACER HSUSB Drivers.
If so don't waste your time looking for them on the web.
You probably won't find them.
What you need to do to install the HSUSB Drivers is to let your Windows; update them for you.
When Windows 7 pops up a message showing you that it wasn't possible to install 4 HSUSB Drivers, select (in that same window) the option that lets Windows Update Install them.
When done you're good to go.
3) In your device press:
Menu > Settings > Applications > Development > Enable USB Debugging Option.
4) Turn off your phone.
5) Press this button combination:
Vol. Up + Volume Down + Power Button.
IMPORTANT: As soon as the Red LED turns on; let go of the volume Down Button and you are Fastboot mode.
(You will see 4 text lines instead of the usual 2)
How it should look:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6) While in this mode, connect your device to your computer.
7) Extract "recovery for mini" (pack) and run: "install_recovery.cmd"
8) Follow the instructions (press any key when prompted).
9) When it's finished the phone reboots and you're done.
10) Test it by performing the Hard Reset key combination.
Press: Camera + Vol.Down + Power Button (Wait untill it vibrates 3 times)
--------------------------------------------------------------------------------------------------------------------------
CWM Recovery Acer Liquid Mini Controls:
Volume Up / Down = Move selection Up or Down
Camera = OK
Power button: Only for: Backup / Restore, Mount / Unmount, and some of the functions of Advanced Section
--------------------------------------------------------------------------------------------------------------------------------
Source: Acer-Club.Ru
Author: rekaveri
Thanks Acer-Club.Ru for this Awsome Mod !!!
Advantage MX ClockWork Mod Recovery for Acer Liquid Mini e310 [Linux Tutorial]
[Linux Tutorial]
Important: Before starting you agree that you do this on your own will and if anything goes wrong, you are the one responsible for any trouble you might find. (i.e: your device gets bricked; errors; etc..)
Either ways this method was tested in my device without having any problem.
Instructions:
1) Download: "recovery for mini.zip"
2) Extract it to your desired place.
3) Run the Command Line on this folder.
4) Then type:
"adb devices"
-->(To Check if your device is connected / listed)
It must show the device serial number.
5) Turn off your phone.
6) Press this button combination:
Vol. Up + Volume Down + Power Button.
IMPORTANT: As soon as the Red LED turns on; let go of the volume Down Button and you are Fastboot mode.
(You will see 4 text lines instead of the usual 2)
7) Go back to the command line and type:
"fastboot -i 0x0502 flash recovery recoo.img"
-->(to flash your recovery rom)
Note: "recoo.img" stands for the image file name that comes with the "Recovery for Mini"(.zip/.gzip/.tar file).
It may also be called "recovery.img".
Hope this Helps every ACER LIQUID MINI E310 USER!!
P.S - I wrote with caps, because i want Acer Liquid Mini e310 users to get what they need.
I asked for it and unfortunly i got many closed doors; because almost every (thankfully not everyone) forum; maker; developer is forgetting about this awsome device capabilities.
--------------------------------------------------------------------------------------------------------------------------------
Source: Acer-Club.Ru
Author: rekaveri
Thanks Acer-Club.Ru for this Awsome Mod !!!
Okay so how do I get more custom ROMs for this phone? Is cm7 or Miui out?
Okay thanks.
works fine
The tutorial works for me ..
now what should I do now to install a new rom ..
I have a big doubt .. why we want to install a new rom as we are already having 2.3 version in our Acer e310
Please clear this and tell me how to install a new rom such that I can try now
Personalgroups said:
The tutorial works for me ..
now what should I do now to install a new rom ..
I have a big doubt .. why we want to install a new rom as we are already having 2.3 version in our Acer e310
Please clear this and tell me how to install a new rom such that I can try now
Click to expand...
Click to collapse
its not just abt version alone. its about the features,speed,performance,gud battery life which the custom roms provide.
Sent from my Nexus One using Tapatalk
The Tutorial (http://forum.xda-developers.com/showpost.php?p=22829039&postcount=2) doesnt workx for me. =(
The Device was not found and doesnt reboot in Bootloader. Drivers are installed (USB Driver_Acer_1.0_A23G_E310).
I must say, I work in XP Mode. In Win7 x64 the Drivers doesnt work. In XP Mode the Drivers are okay and I've rooted it in XP Mode.
I have the problem that my E310 is locked for Vodafone, and I need a unlocked Phone for orange Austria.
how to boot into recovery
Is safe installing the stock rom from the acer site after this?
Edit: tested and it is safe
help
hello , im a begginer , so i want a big help .. i try to flash my acer liquid mini e310 ,, but it seems i flashed the wrong kernel clorckworkmod ,,
Now when i press the power up buton , it stand just on ACER LOGO , it won't turn on i let it for hours but it wont turn on....
please help me
Don't work for my phone
Sheitx said:
Greetings MeTall3d;
I've had the same issue.
I've figured out a way to flash the recovery with Clockwork Mod.
[Windows 7 Tutorial]
Important: Before starting you agree that you do this on your own will and if anything goes wrong, you are the one responsible for any trouble you might find. (i.e: your device gets bricked; errors; etc..)
Either ways this method was tested in my device without having any problem.
Instructions: (For Windows 7 Users)
Before you start: This CWM (ClockWork Mod) is meant to work on Acer Liquid Mini E310 with Gingerbread Version 2.3.3 Only (As refered by Acer-Club.ru)....
Thank you for your post here for these problems but I tried to do this all went well. When the phone restarted it freezed another time on the first screen ACER how it was before... doesn't want to continue anymore...
Click to expand...
Click to collapse
Greetings;
Try this:
- Enter ClockWorkMod Recovery
(or flash a version for your device if you dont have it)
- Download Sherpya Rom and copy the *.zip file to your SDCard.
- Reboot your device under CWM
- Select:
- Advanced > Wipe Dalvik Cache
- Erase Cache (on the 1st menu)
- Advanced > Mounts and Storage > Format "Boot"; "Cache" and "System".
- Go back to the 1st Menu
- Install *.zip from SDCard
- Select the Sherpya Rom zip file.
- Let it complete.
- Done.
Now you have the best rom ever for that device.
With:
- Custom kernel (ext4 supported)
- Everything Working.
- Already Rooted
Please press thanks if it helped you. This will keep me motivated to help and continue to give support for Acer Liquid Mini e310.
Sent from my E310 using XDA Free mobile app
Link for Acer Liquid E310
hi developers,
i have a acer liquid mini e310 an i need the "recovery for mini.zip" for windows. but i can not download it from the russian website. please can enyone donload or mailin me the zip-file?
i have fout it on the following site: http://forum.xda-developers.com/showthread.php?p=22833427#post22833427
Greetings;
Recovery e310 Signed:
http://www.mediafire.com/download/7orczcz4d7jnn9f/recovery-e310-signed.zip
Note: The file is for the device. Not for Windows x)
Let me know if you need any help.
Please press Thanks Button if it helped you as this will keep me motivated to continue helping and supporting this device.
Best Regards;
Could alt room help in sim unlocking ?
About network unlocking there is a specific thread opened :
https://forum.xda-developers.com/showthread.php?t=1414377
Related
So its time to have some fun flashing your phone.Rooting means getting acess to the Root of the Phone Rom.Once rooted you can install Custom Roms [Operating Systems],Remove Crappy apps, get better performance and Battery etc. Rooting your phone is Not Big job ,But a Bit lengthy at the first time..But you will end up in trouble if you dont know the actual procedure.That doesn't mean you will brick your phone.Android phones are based on Flash ROMs ,just like a memory card. So flashing a 100 or1000 times wont destroy it.It is completely Safe and there is nothing much to worry about .But make sure sure you have an un interrupted power supply if you are using a PC. So here i am taking effort to bring out a step by step description of the process.
Understanding what it is...
Many people still doesn't know what actually is rooting and a custom rom mean. The Process is to completely Remove your Current Phone OS and Install a Fresh copy of another OS. If you have installed a windows /Linux formatting your pc its easy to understand.Your device has a 440MB flash memory for OS and 420 Mb Internal memory for installing apps etc.When the phone comes to you not the entire memory of 420 Mb is available to u ,because sony has included some stock Bolt wares in ur OS.So rooting provides a larger internal memory as well .In your pc you might have come across the bootloader /boot menu .In your sony phone this boot-loader is Locked to prevent alterations. But android being an opensource stuff , it is required that the phone manufacturer should allow you to install Custom androids. So in order to access the Boot-loader u will have to unlock it first. After unlocking a recovery Mode is to be installed.That's what u call kernelling. After that , u will wipe the User memory 420mb ,Format[Done auto] & install the Zip file containing android os onto the 440Mb memory.The zip file contains the Customized android OS.Its called the rom .MiUi is one such rom.
Benefits: Lots of Customization , More features ,Better battery ,A faster OS,Latest Android versions.
Negatives: Voids warranty .
Why it voids warranty ?
Simply because Sony cant take up the responsibility if you destroy your phone hardware by your mistake. For example if u overclock [Possible only after rooting] the CPU there are chances that it smokes out.
Warning : Unlocking Boot loader voids Sony Service Center warranty.
Rooting involves 3 steps,
1-Unlocking Bootloader
2-Installing a Custom Bootloader /Kernel/Recovery
3-Installing the Rom /Android OS.
Tools Required [Download all of them before starting ]
1.Sony Xperia Flashtool *[Optional]
2.Drivers
3.android_winusb.inf Driver[Click to Download]
4.ROM & Kernel (Once downloaded , Copy the Rom File to the Micro SD[Important, if u don't wanna end up searching for a card reader ] )
OR
ROM-2 [Lasans's MiUi ] ( If u find any issues with the other one Try this Rom,Download only the Rom File )
*Actually you do not need the Complete Xperia flasher tool. you are only using the Fastboot from Xperia flasher. If u don't have time to download the Flash tool just download only the Fastboot tool and Drivers from HERE or Here .But its better to download Flash tool as u can perform some additional operations like Installing apks , Uninstalling features etc . using the tool.
Step 1 : Unlocking the Bootloader
1. Unlocking the Bootloader requires the Unlock Code.You can get it from the sony website at the Following link .
http://unlockbootloader.sonymobile.com/
Enter your Phone IMEI ,Email etc. and Get the unlock Code.While you enter the IMEI take care not to Include the last DIGIT of your IMEI.IMEI should be 14 digits long.
2. Now Install the SONY Xperia Flash tool from Here
http://androxyde.github.com/ OR JUST UNZIP THE FASTBOOT.ZIP TO C:\
3. You will need fastboot on the computer to unlock the bootloader of the Sony Ericsson Live with Walkman . Fastboot is available in Xperia Flashtool folder in C:\Flashtool or where you have installed Flash tool OR IN C:\ WHERE U HAVE UNZIPPED IT TO.
4. Now Power off your Sony Ericsson Live with Walkman.
5. Press & hold the Volume Up button while connecting the Sony Ericsson Live with Walkman to the computer.The Notification LED will now glow in Blue color.This is called Fastboot Mode.
[ Press and Hold Vol Down key while connecting to USB will Boot in Flash Mode ]
6. If the drivers are not installed automatically ,go to the Drivers folder in Xperia flash tool folder and install the drivers.You can check if the drivers are properly installed by going to the windows device manager and see if there is any Unidentified device .If properly installed it will shown in device manager.If u find an entry "s1 boot fastboot " with Missing drivers in device manager ,Right Click there -> Update Driver ->Browse My computer ->Let me Pick -> Have Disk >> Then Point to the Downloaded "android_winusb.inf" file. >> Choose "Android Bootloader device".Now your drivers Should be installed.In the device manager You will find an Android device.
7. Go to Terminal or Command prompt in windows and change directory to "C:\Flashtool\x10flasher_lib" .You will find the fastboot.exe file there.
See the Image attached at Bottom of this page .
Enter following commands to navigate
cd\
cd flashtool\x10flasher_lib or cd fastboot
Now you are int the folder containing fastboot.exe
8. Now check if the phone is properly connceted and detected by Typing the following in the cmd .
fastboot -i 0x0fce getvar version .It must return the version of fastboot .Eg: .3
If it shows "Waiting for device" the device is not connected properly.If it returns anything else [ like .3 ] the device is detected .
9. Now type the Following and press ENTER
fastboot -i 0x0fce oem unlock 0xKEY
where KEY should be replaced by the Unlock key you generated from the Sonymobile website .
10. Once it display Flash operation complete , you are Done .Your phone Bootloader is no more locked.
PS:If you find any problems using this method you may follow one these links.
http://unlockbootloader.sonymobile.com/instructions
http://forum.xda-developers.com/showthread.php?t=1560613
Step 2 : Installing the Kernel
Android is based on the Linux kernel.A kernel is actually a link between the OS and the hardware.It controls the hardware.So obviously it has got something to do with the performance & battery life. The kernels contain the RECOVERY MODE+ROOTING. You may read more about kernels on xda-developers.com .So there are a number of kernels available for Sony live . You may find it in the rom download pages usually.
Two of the popular kernels are
1. X-Kernel
2. Rage kernel
Download one of these kernels, a ROM file and flash your phone.
Here we are working with the Expeacers MiUi Rom.
Steps
1. Once you are done with Unlocking Rest is So easy .Do not disconnect the phone .We are going to use the phone in Fast boot mode. If u have disconnected ,don't worry ,just shut down [Or pullout & Re-insert the battery ]the device and Reconnect it to PC Holding the Vol+ key pressed.Now the notification led will turn Blue.You are back in fast boot mode.
2. Copy the Downloaded kernel img file into the folder where fast boot is located and rename it to "Boot.img" .
3. Now go to Command prompt , Navigate to the x10flasher_lib[As done before ] ,Enter the following command.
fastboot flash boot boot.img or
if it doesn't do anything
fastboot -i 0xfce flash boot boot.img
4. Now you are done ."Flash operation complete " will be displayed. Disconnect your phone from PC.
Before you proceed to next step you should have copied the ROM[Zip file ] to your Memory card in the phone.
Step 3 : Installing the ROM
This is the easiest part.Just turn on your phone ,after a few 5-10 seconds the notification led will glow .
At this time Press the vol+ key once. Phone will enter the Boot loader . Now you can see a number of option.Use the Vol+/- key to navigate ,Home key to select . Choose the wipe Cache ,Wipe Rom/factory Reset options[in some boot loaders ] .This is important as this will clean up all the previous user data and installed apps. Wipe actually cleans the internal memory and Cache. This is called clean install.
Now after cleaning up ,Choose the "Install Zip From SD Card" . Now follow the on screen instructions Rest is self explanatory. Once you finish installing the Rom Reboot the device. In most of the cases First time booting might be so long. All you have to do is be patient.If its taking longer than usual try pressing the Home key once.
So its time to Enjoy a new android... A yummy Ice cream Sandwich. Now you may try as many ROMs as u wish by simply following the step 3 only.
Happy Flashing... Enjoy ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Combined Unlocking and Burning kernel .[Click Me For Full size ]
Burning Kernel [Step 2 ]
Unlocking Bootloader [Step 1]
Man, I think you've worked long time on that, but look at the sticked threads. There's my rooting guide and bootloader unlocking, yet. You tell the same again.
And in my signature there's how to install custom kernels/roms, in the pinned thread by someguyfromhell you can read the same...
Its k..
Dude .. I made it for my Blog...:angel::angel: .. :angel::angel:
Its not tailored for XDA. Posted it here just in case somebody find it usefull
Yeah, it could help somebody...
Sent from my GT-I9100 using xda premium
THANKS MAN IT HELPED ME AS IAM STILL A NOOB and i still stuck at few steps to un lock bootloader byt at last did it
thnQ
hi. this Tutorial work perfect on every stock rom ( GB-ICS ) ( for all Xperia phone with 854*480 screen also can use this tutorial for all xperia with 480*320 screen but use install-cwm2.cmd in step 5 )
Requirements:
rooted phone
your phone driver
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How to:
1.Download Attached File and extract it.
2.Make sure you enabled USB debugging (in settings/applications/development on ICS )
3.set Screen timeout to 10 minutes or more ( in settings/display/screen timeout on ICS )
4.connect you phone to pc with usb, during your screen is On.
5.Run install-cwm1.cmd from the file that you download it in step1.
6.when a black window opened, press any key to continue.
7.if superuser ask some thing, just tab allow.
8.wait to install be complete.
9.hit my thanks buttom
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
main topic here
saeed74 said:
hi. this Tutorial word perfect on every stock rom ( GB-ICS )
Requirements:
rooted phone
your phone driver
......................................................................................................................................................................................
How to:
1.Download Attached File and extract it.
2.Make sure you enabled USB debugging (in settings/applications/development on ICS )
3.set Screen timeout to 10 minutes or more ( in settings/display/screen timeout on ICS )
4.connect you phone to pc with usb, during your screen is On.
5.Run install-cwm1.cmd from the file that you download it in step1.
6.when a black window opened, press any key to continue.
7.if superuser ask some thing, just tab allow.
8.wait to install be complete.
9.hit my thanks buttom
...................................................................................................................................................................................
main topic here
Click to expand...
Click to collapse
Why need so much thing when there is `x-parts` in market.
Web_E said:
Why need so much thing when there is `x-parts` in market.
Click to expand...
Click to collapse
+1
pvyParts said:
x-Parts
Formerly 'Xperia CWM Auto-Installer'
READ THIS BEFORE GOING ANY FURTHER!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Howdy All!
So We've been Busy yet again
And we are proud to re-release This Tool. Whats new
All New UI that uses the ActionBarSherlock framework to give full Holo theme + Action Bar to devices pre ICS
To support more phones i have had to change the way the app works.
(OLD VERSIONS AVAILABLE IN ATTACHMENTS)
What it does now
1 - Check your phone model and compare it to a list of supported devices.
2 - If you phone is supported you can pick any of the supported CWM versions for you phone.
3 - When you click install it will download the CWM "recovery.tar" to your SD-card .
4 - Build you a "chargemon" file to match you phone.
5 - Take the charger + sh file from within the app.
6 - It then backs all the previous files up to the SD-Card and moves all the files to system as needed.
7 - if there are no problems then it is done and CWM is installed(into system)
Comming Soon
With the new app i am also able to do many new things that were not possible in it's last incarnation
(in no particular order)
1-Click De-Bloating of Stock Firmware
1-Click Enable of Init.d support for locked Bootloaders / Stock Kernels
Few more in the works too
Many more phones
My current plan is to support most Xperia devices
My current plan is to add these soon
X10, X8, Xperia S, U, P, Sola
also if there is no compatibility issues the app does not need to be updated to add phones / recoveries. I can do it all server side.
This App will work with the Sony Xperia porfolio. it will install CWM into the system partition so you can use recovery even with a locked bootloader!
Usage
Launch the Application,
Swipe Between Tabs or Pick Tabs
Let it detect your phones setup
Press Install and CWM will be installed into your system.
To access recovery simply, reboot phone and press any key on boot at the Sony Ericsson logo, when the notification LED turns Blue. or use the "reboot to recovery" button from within the app.
Recovery
Currently there are 2 recoveries that are able to be installed
2.3.* Roms
5.0.2.7 for GB Roms (nobodyAtall) [link]
4.0.* Roms
5.5.0.4 Recovery for ICS Based ROMS (pvyParts)
Changes
-USB Storage Mount works
-System wont be corrupted (Thanks nAa for the pointers + puppet13th for testing)
Requirements
Stock ROM
Root
(Locked Boot Loader, if you are unlocked you really don't need this)
Supported Phones!
LT15
LT18
R800
MT15
MT11
SO-01C
ST15
S51SE
SK17
ST17
SO-02
SO-03
SO-03
MK16
ST18
MK11
How to install!
grab it here
x-Parts on the Market!
or from the attachments in this thread!
if you experience issues with the app please post them here
Enjoy
Pvy.
Permissions explained.
Storage
Modify/Delete USB and SD-Card Storage Contents
Required to store files on SD-Card prior to installing to system
System Tools
Prevent Phone from Sleeping
Required to Wakelock the phone whilst installing to ensure no issues
Network Communication
Full Network Access
This allows x-Parts to get the current supported phones list and to download the "recovery.tar"
View network State
Allows x-Parts to check for a connection before connecting so it does not crash
Current bugs
MAJOR FIXED
If phone is unsupported app crashes (My bad i forgot to add the unsupported screen)
sometimes crash with no internet connection (Looking into it)
MINOR
Few Spelling mistakes (Again sorry will get someone who is betterer at englishing than me to fix it)
App Change Notes
Code:
[B]v6.0[/B]
All New App
100% generated chargemon
new recovery.tar selections
new backbone
Milestone 1
Screen Shots
Comming Soon[/SIZE]
Disclaimer:
I can't be held responsible if this Mod bricks your device or makes it explode in your hands! Use it at your own risk!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1437840
But this is so eazy.
Sent from my WT19i using Tapatalk 2
Web_E said:
Why need so much thing when there is `x-parts` in market.
Click to expand...
Click to collapse
There are some people who don't always have wifi or data connection to use Xparts. This is quite handy, actually. Especially now that I don't have a fast wifi connection but badly needing cwm recovery.
saeed74 said:
But this is so eazy.
Sent from my WT19i using Tapatalk 2
Click to expand...
Click to collapse
But x parts is "eazier"
sony xperia ray
ics 4.0.4 rooted
stock rom
[ToolKit] OnePlus One Easy Toolkit By Scumpi : flash recovery & CM 11s Build & more
How to use OnePlus One Easy ToolKit By Scumpi ?
Warning: Note: No one but yourself is responsible for what you do to your device.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Introduction
Hello everybody ! I don't have the OnePlus One, so if something goes wrong, please, tell me, I'll try to resolve the potentials issues ! Any suggestion to make this toolkit better or any ideas are welcome !
With this Toolkit, you will be able to unlock your bootloader, install a firmware, or a custom recovery or simply boot in the custom recovery of your choice.
Requirements
A OnePlus One & ADB / fastboot drivers installed on your computer --> see HERE
Enabled USB debugging (On your phone go to Settings > About phone > Tap on Build number 7 times. This will enable Developer options. Now go back to Settings > Developer options > Enable USB debugging)
Download the following file
--> For assigns users a 64 GB OnePlusOne Easy Toolkit By Scumpi - 64 GB Users.zip
MD5 : 3716E77800F0B17365B7A6AF272E91E9
--> For assigns users a 16 GB OnePlusOneEasy Toolkit By Scumpi - 16 GB Users.zip
MD5 : 01091F52C51E2DAD64ACB9C0EF27C1B6
How to Use / first step
Download and extract this folder OnePlusOne Easy Toolkit By Scumpi - xxGB Users.zip (Feel free to rename it as you like if it makes you happy)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The first step consist to unlock the bootloader of your OnePlus One
Connect your phone to your PC via the USB cable (must be on)
Open the folder where you extracted the files and double click "Unlock Bootloader"
Confirm with the enter key to start the process and wait until the end of the unlocking process.
Before to flash the firmware, install or boot into a custom recovery (Philz recommended), and make a backup of your actually rom !!
How to Use / others possibilities
To perform another operation, do the same by choosing the desired action. Here is the list of others operations you can perform using the Easy OnePlus One ToolKit :
Double click on the desired file in the folder to launch the operation
Unlock Bootloader - Unlock the bootloader of your OnePlus One
Install CM 11s Build XNPH22R - Install the Official firmware CyanogenMod 11S
Install-TWRP 2.7.1.0 - Installs TWRP custom recovery v2.7.1.0
Install-TWRP-2.7.0.0 - Installs TWRP custom recovery v2.7.1.0
Install-Philz-recovery - Install the custom recovery Philz-recovery (Recommended)
Install-CWM - Install the custom recovery CWM
Install-Original-Recovery - Install the recovery Stock
Boot-TWRP 2.7.1.0 - Boot into TWRP custom recovery v2.7.1.0
Boot-TWRP-2.7.0.0 - Boot into TWRP custom recovery v2.7.1.0
Boot-Philz-recovery - Boot into the recovery Philz custom-recovery
Boot-Original-Recovery - Boot into the recovery Stock
Boot-CWM - Boot into the custom recovery CWM
Important before installing a recovery custom :
Go into "Settings" > "Developer options" and disable the "Update recovery with system updates" option.
After that, try the steps for installing a custom recovery again.
You will be able to boot your phone into you new custom recovery using the Vol down and Power buttons.
If you don't do that, when tou will turn off the phone and press Volume down and Power buttons you will enter in recovery stock.
Tips:
To find files faster in the folder, right click with the mouse, then 'Sort by' and select "Type"
Notes
For anyone having device not found problems follow this post. HERE
(Specifically the part under the picture)
You may have to manually install the driver twice like I did, once with the phone in regular mode and once in fastboot mode. It will show a little ! in device manager.
Thanks to @genardas for the tips.
Credits & Thanks
nexgen999
acer73
Dees_Troy
Chromium
French OPO users can go HERE
Reserved for me
why do you recommend to install philz recovery?
stop leak release and rename it !!
i have build this look that>
http://chinandroidphone.com/oneplus-one-review/
and tutorial here
http://chinandroidphone.com/cyanogenmod11s-install-oneplus-one/
copie paste are so easy
nexgen999 said:
stop leak release and rename it !!
i have build this look that>
http://chinandroidphone.com/oneplus-one-review/
and tutorial here
http://chinandroidphone.com/cyanogenmod11s-install-oneplus-one/
copie paste are so easy
Click to expand...
Click to collapse
It's not copy/paste because It's other and more different possibilities and not the same build into this toolkit...
I give you credit in first post to make you happy but don't say its copy/paste, because it's not true... And please don't quote the first post, its not good for visibility...
Tks
salespalace said:
why do you recommend to install philz recovery?
Click to expand...
Click to collapse
he recommande beaucause i his a leecher he inly look my post and my work !!
cwm and twrp have some backup and restore bug
nexgen999 said:
he recommande beaucause i his a leecher he inly look my post and my work !!
cwm and twrp have some backup and restore bug
Click to expand...
Click to collapse
Tks,
For your pleasure i've added you on credits & thanks :good:
your the best
Sorry I'm not so smart. Where is the phone rooted in the process? Thanks so much for your work!
Nice thanks for developing!
I hope i get my opo fast
stu5797 said:
Sorry I'm not so smart. Where is the phone rooted in the process? Thanks so much for your work!
Click to expand...
Click to collapse
There is not... Too root must install a recovery custom & flash this file http://download.chainfire.eu/420/SuperSU/UPDATE-SuperSU-v1.99.zip
Maybe I will add it at the toolkit if ive time
scumpicule said:
Reserved for me
Click to expand...
Click to collapse
trait-ar familia
ce baiat destept avem aici
Followed all your steps. keep getting device not found in the command prompt window. then it says waiting for device.
shaker2k said:
Followed all your steps. keep getting device not found in the command prompt window. then it says waiting for device.
Click to expand...
Click to collapse
Open a command promp and type adb kill-server & Try again. Or close the adb process
Are you properly install adb & fastboot driver?
Edit :
Hello
Someone to test a batch file for the root ? PM me if you want
Thanks @scumpicule ! Je testerai ca pour changer sur philz peut etre Tu arrive tard j'ai galèré une semaine a rooter mon One etc.. Mdr
@shaker2k
Still the "device not found" ?
@pro castinato
Better late than never Can you try the batch file for the root d'or me please?
Envoyé de mon GT-I9305 en utilisant Tapatalk
scumpicule said:
@shaker2k
Still the "device not found" ?
@pro castinato
Better late than never Can you try the batch file for the root d'or me please?
Envoyé de mon GT-I9305 en utilisant Tapatalk
Click to expand...
Click to collapse
I got it figured out I didn't know I had to manually put it in fast boot mode. Other toolkits I have used do that automatically. You might want to put that in the op.
shaker2k said:
I got it figured out I didn't know I had to manually put it in fast boot mode. Other toolkits I have used do that automatically. You might want to put that in the op.
Click to expand...
Click to collapse
Thanks
I"ll wait for other feedbacks because it works on my computer...
Edit :
And the comands via batch files works properly once you was in fastboot mod ?
scumpicule said:
Thanks
I"ll wait for other feedbacks because it works on my computer...
Edit :
And the comands via batch files works properly once you was in fastboot mod ?
Click to expand...
Click to collapse
Yes. once I manually put the phone in fast boot it worked like a charm.
For anyone having device not found problems follow this post. http://forum.xda-developers.com/showpost.php?p=53420414&postcount=2
(Specifically the part under the picture)
You may have to manually install the driver twice like I did, once with the phone in regular mode and once in fastboot mode. It will show a little ! in device manager.
How To Root Galaxy Win or Galaxy Grand Quattro (GT-I8552)
Best viewed in a Web browser. The pictures won't appear as intended in the XDA app.
One of the bit.ly/shortened URLs linked in this guide which directly leads to the download page of the file may be blocked by a security feature. They're all safe. Once you click a link you may be warned by your browser for accessing the URLs, but fortunately, the Warning page has a part where there's an option to proceed with accessing the page, just proceed and click the link. See example below.
bitly suggests that you
Change the original link, and re-shorten with bitly
Close your browser window
Notify the sender of the URL
Or, continue at your own risk to: http://download.clockworkmod.com/drivers/SAMSUNG_USB_Driver_for_Mobile_Phones.exe[/COLOR]
If you get no warnings, much better. Let's proceed.
The Preparation : Before you start, make sure that . . .1) You have a PC / Laptop running Windows Platform
2) Samsung USB Driver for Mobile Phones (click to DL from clockworkmod.com) is installed
3) Phone battery power is at least 70%. That's good enough to not run out of power during this whole process.
4) Its USB Debugging is enabled (Settings > Developer Options > USB Debugging)
5) You have a USB Cable to establish a connection between the phone & your computer
6) You have the files needed. Keep three files in one folder.
- twrp_2.8_material - 9185 KB (click to DL directly from its dev's (Gody) MediaFire drive)
- Odin3-v3.09.zip - 972 KB (click to DL from sammobile.com's MEGA shared cloud storage) This software runs only on Windows platform.
- SuperSU_v1.94.zip - 1,703 KB (click to DL direclty from chainfire website)7) A copy of that flashable zip file "SuperSU" must be saved in your phone's memory, internal or external .
1st Step : Flashing TWRP Recovery Via OdinWhat is Recovery? | The Two Android Recovery Agents (CWM & TWRP)
Here, we will use TWRP Recovery. We will install it on the device using the Odin software.
Required: your phone, Windows PC, USB cable, Odin, and TWRP (.tar file)
1) Boot phone to "Odin Mode, a.k.a. Download Mode" by pressing the buttons at the same time: Volume Down, Power, & Home. When the device vibrates, immediately release the Power button while still pressing the other two until the Download Mode's warning screen appears.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2) Press the "Volume Up" button to continue to Odin Mode
3) In your computer, using WinRar or 7-zip, extract the Odin zip file, then run Odin3 v3.09.exe as Administrator
4) Connect your phone to your PC via USB. It should say "Added" on Odin.
5) On Odin, click the "AP" button, find and select the "twrp_2.8_material.tar"
6) Click "Start" to proceed in flashing the TWRP Recovery. *This takes about a minute.
7) It's partially finished when it says RESET! with these three lines in the message box.
RQT_CLOSE !!
RES OK !!
Removed!!
Then, phone will reboot automatically to OS.
8) Sometimes it takes a few more seconds after the phone has rebooted for you to be able to completely close Odin. Just wait for Odin to change its status from RESET! to PASS! and say All threads completed. (succeed 1 / failed 0), as shown in the picture below.
Then, you may click Exit and disconnect cable.
TWRP 2.8.5.0 Recovery is now installed.
And this is how to boot to "Recovery Mode". Press the buttons at the same time: Volume Up, Power, & Home. When the device vibrates, immediately release the Power button while still pressing the other two until the SAMSUNG boot-screen appears. See photo instructions below.
By the way, see the pictures below for the difference between the Galaxy Win's stock recovery and TWRP's recovery.
Important : NANDroid Backup
At this point, with TWRP Recovery installed, you can now create a NANDroid backup. It's a backup of literally everything in your phone - System, Cache, Data, EFS, and Boot. It is considered to be the top priority of things to do before messing with your phone i.e. flashing ROMs, kernels, or apps. After you create a backup, the backup file would be located in "sdcard0/TWRP/BACKUPS/" for internally saved backup, and "extSdCard/TWRP/BACKUPS/" if it's saved to the external memory. This file can also be transferred to a different storage, say a hard-disk, if you need to have more space on your phone for something else. You may skip to the actual rooting part. But, in case you do want to create a backup just follow the simple steps below. 1) Boot phone to Recovery Mode
2) Select Backup
3) This part lets you name the backup file with whatever name you want, choose whether to save it internally or externally, and pick which stuff you'd like to backup. And when you're ready, swipe to backup.
*This may take 5-10 minutes depending on how big your whole current installation is.
4) Once done, you may proceed with the 2nd part of this rooting guide.
2nd & Final Step: Flashing SuperSUSuperSU allows for advanced management of Superuser access rights for all the apps on your device that need root.
Required: your phone, and SuperSU (.zip file)
1) Boot phone to Recovery Mode
2) Select Install
2) Locate the zip file SuperSU
3) Go ahead and swipe to install SuperSU *This takes just 5-10 seconds.
4) Reboot System
You now have root access. Good luck!
Important Reads After Rooting An Android Device:
What Is A Nandroid Backup and How Exactly Does It Work?
TriangleAway – Reset Flash Counter Tool
11 Things To Do After Rooting Your Android Smartphone | RootMyAndroid.Org
Suggested ROM:
COSMIC 2.0 ROM (released 4/27/15) (CM10). Rated to be the most stable custom ROM for the device.
Originally developed for Galaxy Core Duos by dev abhi922, then ported by dev gody420 to work on Grand Quattro.
Hey mate, thanks a lot! Your guide is very clean and objective. Links shown properly. You did a good job!
But I'm still facing a problem on my I-8552B. Whichever Recovery I try to flash, I keep getting a black screen.
I tried the one you posted and the 6.0.3.7 version, but nothing different. :/
Thanks! I'm as glad that this guide is helpful to us who need it.
When does this black screen appear?
What have you done so far?
Sent from my GT-I8552
The phone is working properly, I can boot into the system normally. But after I flash any custom recovery via Odin (all I tried, so far), and boot into recovery (phone off, VOL +, Home and PWR boot), I get a black screen.
I've read that people are getting this issue on devices bought after July/14...
Please refer to this thread for more ideas.
http://forum.xda-developers.com/showthread.php?t=2977978
Best of luck!
Sent from my GT-I8552
Hi. .when my galaxy win was rooted, the task manager was deleted. Is there a way to recover it plz. .tnx
Sent from my GT-I8552 using XDA Free mobile app
[Root ,Easy ,Fast No Pc! ]
:angel:Visit the link: http://forum.xda-developers.com/grand-quattro/general/root-grand-quattro-win-duos-t3091676
Good Share
Thanks for clear share;
1- Odin3-v3.09.zip link dead
2- I download the v3.07 and It works only AP = PDA
3-I like the TWRP screen
Thanks again
i'm too having the same problem..after flashing custom recovery, the screen goes black when i try to enter recovery mode
Samsung Galaxy Win GT-I8552B
Excellent tutorial, but I could not install SuperSU, my phone model is
Samsung Galaxy Win GT-I8552B
Version: 4.1.2
Can you help me?
Best regards
Roosevelt Paz Garcia
I am stuck at 'starting adb sideload features' in adb sideload. Please suggest what to do?
I am not getting the install option on the recovery boot
someone help plz
No need to unlock bootloader for samsung ???
Is it??
Hi hear i am going to share how to root Vibe s1 Marshmallow With custom Recovery TWRP
Requirements 1) SP Flash Tools 5.1524.00 – https://spflashtool.com/download/SP_Flash_Tool_v5.1524.00.000.zip
2) LenovoVibe S1 Drivers & Mediatek USB VCOM Drivers – Drivers
3) Lenovo_Vibe_S1_TWRP-3.0.2.3-M_by_SevenMaxs.zip +
SuperSu TWRP-3.0.2.3-M_by_SevenMaxs.zip +
SuperSu
InstructionsKeep your device battery charged above 50%
Enable USB Debugging on your device.
Go to > Settings > Developer Options > USB Debugging.
If Developer Options is not located under settings then enable it by going to Settings > About Phone > Device Info and tap on Build Number for about 7-8 times. And then go back and follow the previous step.
Step 1: Install the Lenovo Vibe S1 Driver & Mediatek Driver ( first go to smartphone driver and install "dpinst.exe" then install Usb VCOM driver. to do that please refer google to how to do it in your current OS
Step 2: Extract SP Flash Tools on your desktop
Step 3: Extract TWRP folder on your desktop
Step 4: Open flash_tool.exe from the SP Flash Tools folder and clock Scatter-loading and then browse the TWRP folder and select the MT6752_Android_scatter.txt
Step 5: In the Flash Tool Window Press CTRL + SHIFT + O a new options window will open. Click download and then tick USB Checksum and close the window
Step 6: Now click the download button
Step 7: Switch off your Lenovo Vibe S1 and then connect it using the USB to the computer/laptop
Step 8: You will get the Download Complete window within a moment
9) Remove the cable and press volume up and down + powerkey together and wait for the the lenovo logo or vibrate, it will go to twrp if you see black scree please wait for 2 mintues after twrp come copy the "UPDATE-SuperSU-v2.46" file to the phone and flash it
Note: Custom Recovery of SevenMaxs is the current updated recovery available but when you try to Wipe (dalvik,cache,system,data,etc) it will take more time ,you have to wait it to complete other than this no other issue
All the above are taken from different resources so if you find any difficulty ask to known experts.
Thanks to @techolite.com , @supersayan1000
Can't actually boot up after following steps provided
Hi, thanks for your hard work for making a post related to root for Lenovo Vibe S1 root. Currently I was following the steps,until the last step, my phone was in the dark screen and nothing came out after waiting 2 minutes. May I know if there is any solution to solve this problem?
I know how to solve this
bricked my phone
had to flash with stock rom after following instructions. beware.
The same problem
smpmfx2s96 said:
Hi, thanks for your hard work for making a post related to root for Lenovo Vibe S1 root. Currently I was following the steps,until the last step, my phone was in the dark screen and nothing came out after waiting 2 minutes. May I know if there is any solution to solve this problem?
Click to expand...
Click to collapse
Do remember this twrp recovery will only work on Android 6.0 :cyclops:
Twrp takes takes about 1-2 minutes to boot up as it has to time out the screen once to turn on the display(bug in twrp) in that time don't press anything or tap on the screen or the timeout will reset, after waiting for 1 minute(screen time out time) press power key and it should show the twrp recovery :highfive:
and yeah after flashing twrp, please flash SuperSu or Magisk or you'll face bootloop :silly:
I complete all step, but my Android Phone is vibrate every 1 mint,So How to Solve this Problem?
Aravindappu000 said:
I complete all step, but my Android Phone is vibrate every 1 mint,So How to Solve this Problem?
Click to expand...
Click to collapse
i have the same problem
Brick FIXED by Checking both USB Checksum and Storage Checksum Thanks for advice
wrking
ivoriez said:
Brick FIXED by Checking both USB Checksum and Storage Checksum Thanks for advice
Click to expand...
Click to collapse
thanks ... it worked fr me as well :good::good:
---------- Post added at 10:01 AM ---------- Previous post was at 09:33 AM ----------
supersayan1000 said:
Do remember this twrp recovery will only work on Android 6.0 :cyclops:
Twrp takes takes about 1-2 minutes to boot up as it has to time out the screen once to turn on the display(bug in twrp) in that time don't press anything or tap on the screen or the timeout will reset, after waiting for 1 minute(screen time out time) press power key and it should show the twrp recovery :highfive:
and yeah after flashing twrp, please flash SuperSu or Magisk or you'll face bootloop :silly:
Click to expand...
Click to collapse
I have rooted my s1a40 by the above method and flashed superuser also. now I am looking for a custom rom for my device which may upgrade it to latest android version along with VoLTE support. Can
I get any help.
Pressing of power + volume up +volume down is making a small vibration but nothing in the display.. please provide a solution.
hi broo the file is broken plz reupload it
TWRP-3.0.2.3-M_by_SevenMaxs.zip +
SuperSu
Is this for Lenovo S1a40 ?
hi,
i've done all the steps, but when i want to recovery to flash supersu, it goes to screen with chinese menu ???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
anyone help ?
dejan- said:
hi,
i've done all the steps, but when i want to recovery to flash supersu, it goes to screen with chinese menu ???
anyone help ?
Click to expand...
Click to collapse
Did flash was successfull. Read all comments. Try again, if you see Chinese recovery then it should indicate that your flashing was unsuccessful
alwynjoshy said:
Did flash was successfull. Read all comments. Try again, if you see Chinese recovery then it should indicate that your flashing was unsuccessful
Click to expand...
Click to collapse
hi,
it says succesfull.. I get the Download Complete window within a moment.
i have windows 10, and phone is detected it self.
Step 1: Install the Lenovo Vibe S1 Driver & Mediatek Driver ( first go to smartphone driver and install "dpinst.exe" then install Usb VCOM driver. to do that please refer google to how to do it in your current OS
Click to expand...
Click to collapse
when i run "dpinst.exe" i'm getting:
i did install USB VCOM driver tho.
Then 9) Remove the cable and press volume up and down + powerkey together and wait for the the lenovo logo or vibrate, it will go to twrp if you see black scree please wait for 2 mintues after twrp come
Click to expand...
Click to collapse
when i press volume up and down + powerkey together and wait for the the lenovo logo or vibrate, phone boots normaly, no twrp ?
i tried also volume up + powerkey (the same) ... i can't get to twrp, that i would install supersu
dejan- said:
hi,
it says succesfull.. I get the Download Complete window within a moment.
i have windows 10, and phone is detected it self.
when i run "dpinst.exe" i'm getting:
i did install USB VCOM driver tho.
when i press volume up and down + powerkey together and wait for the the lenovo logo or vibrate, phone boots normaly, no twrp ?
i tried also volume up + powerkey (the same) ... i can't get to twrp, that i would install supersu
Click to expand...
Click to collapse
For me vCom driver zip shows Corrupted, do you have any issues?
alwynjoshy said:
For me vCom driver zip shows Corrupted, do you have any issues?
Click to expand...
Click to collapse
well i installed vcom driver with this steps:
1) Boot to Advanced Startup Options
a) Open the "Start" Menu
Open Settings and click on the "Update & security" icon
Click on "Recovery" on the left side and
click on "Restart now" under Advanced startup on the right side
2) Select "Troubleshoot"
3) Select "Advanced Options"
4) Select "Startup Options"
5) Select "Restart"
6) A menu will appear where you can press “F7” on your keyboard to choose “Disable driver signing enforcement“
To install Windows 10 MTK VCOM USB Drivers :
2) Open folder, right click on InstallDriver and run as administrator
3) Install drivers
4) Right-click on Start Menu
5) Select Device Manager
6) Mark your computer and click Action
7) Select Add Legacy Hardware
8) Select Manually Install
9) Click on Show All Device,then Have disk…
10) Find MTK USB Driver for your OS (64 or 86) and click OK
11) Select MTK USB Port and click Next to install
Click to expand...
Click to collapse
somehow i managed to come into TWRP (altho language is russian), but i also managed to flash SuperSU ....so finaly it works
tnx
dejan- said:
somehow i managed to come into TWRP (altho language is russian), but i also managed to flash SuperSU ....so finaly it works
tnx
Click to expand...
Click to collapse
great , what happened really