Related
okay i'll preface this by saying i read all the way through the Vibrick thread and any others i could find on this subject.
i was running NeroV3, decided to try CM7. made a dumb move (apparently?) by restoring back to my stock 2.2 backup via CWM, then flashing to CM7 and THEN trying to flash the Overstock kernel (these steps should be reversed?). i wiped the cache and dalvik cache, but then the kernel flash failed ("installation aborted"), so i rebooted, which went fine. i used ROM Manager to get back to recovery, tried flashing the kernel again, failed again, hit reboot, and then my phone got stuck on the Vibrant screen.
I tried every 3-button combo (also with battery pulls) to get to Download mode but nothing works. when i plug in the USB the spinny-working-hourglass thing pops up but freezes, the green charging bar does not come up, and it does not go to download mode.
when not plugged in, it just keeps returning to the Vibrant screen. i can't even get it to turn off without pulling the battery. i'm definitely not comfortable trying the solder method.
any help is appreciated - i'm not giving it long til i take it to t-mobile and play dumb, worst comes to worst i'll just get a cheapo replacement from the store and find another vibrant (or similar) used on craigslist.
thanks!
UPDATE:::
got the phone into download mode thanks to a thread by Dolphinwigs. had to do have odin open when replacing the battery/holding volume up/down.
waiting on the stock rom download now (internet is slow). hopefully all goes well from here...
The biggest issue I find is that people give up on ODIN to easily. Getting into download mode is not that hard but also not that easy eiither. This is why everyone should purchase a jig, never give up on ODIN try it a thousand times and then once more. Always have ODIN up and ready with the proper files on hand, and as soon as it connects to ODIN be ready to make shyt happen.
In your case an ODIN flash should get you where you need to be and after you root again flashing to CM7 should not be an issue. Keep in mind if you use the .tar in ODIN as well as the .pit you will lose everything on both internal/exteral SD. At this point unless you made a backup prior to your issue its really a lost cost.
Good luck!
i am now back up and running, i just didn't realize i needed Odin running when i tried to go to download mode. so simple, but so frustrating.
one thing though, the ROM i got is Eclair. do i need to update to FroYo before flashing CM7?
and also, so i do it right this time, do i flash the Overstock kernel BEFORE i flash CM7? or does it matter?
Hi All,
Just got my S2 last week. Planning to move to CM7 this weekend. I have rooted the device and am on the Codeworkx kernel. I had a few questions:
1. Is there a problem while flashing via Odin if Debugging is not enabled (I think it is more of a OS feature which we haven't entered when in download mode, so shouldn't matter according to me.) ? I tried to disable debugging, and then went to download mode and Odin did detect the phone, but I did not try to flash anything so if anyone has tried that, your input is more than welcome.
2. The reason for above question is: What if I completely brick my phone (with debugging disabled) and no ROM .zip in the sd storage, how do I get the phone up and running ? I understand that I can flash kernels via Odin, but is it true for ROMs as well ?
3. What's the issue with ROM manager ? Is it recommended to stay away from it for S2 ? I have tried to do a Nandroid backup and it always takes me to the Android robot with a exclamation mark screen. Then I have to reboot and the backup magically restarts and completes successfully. Most people have suggested to use CWM recovery directly, so not sure if I should get rid of the ROM manager altogether.
That should be all for now. I have a jig ready by the way, so am not that worried about the process and plan to do a fair bit of reading before proceeding, however, the answers to above queries would be really great !
Thanks in advance,
Ish
I can answer some of your doubts.
I don't know if you can flash via odin in case you don't have the usb debuggin enabled so I'm not going to say anything about it.
Anyway if something happens to your phone and you dont have any ROM on your sd card but you have CWM recovery installed (which is almost everytime the case) then in CWM there is a mount usb stoage option. With it you can easily transfer .zip ROM files to flash, or even a nandroid backup you saved in your PC.
ABout ROM manager, this is what I suggest you. The first time you flash CM7 don't use ROM Manager (I even tried using it with the codeworkx kernel with no luck). Now, once you are in CM7 it works perfectly and it's really helpful to flash nightlies withouth wiping data (I flash half the nightlies as they are realeased). So the first time you flash CM7 wipe everything (do a nandroid backup first), even wipe /system, /data, cache partition, dalvik cache, so you don't have any problems. THen install zip from sd card and when it finish install the zip file again (just two installs in a row no wiping in beween, trust me, the first time I tried I didn't do that and couldn't boot the phone).
Hope it helps.
EDIT: You can flash stock ROM via odin, there is a thread by infratech were this is explained and you have a list of downloable stock ROMS you can flash with Odin, these are region and carrier specific and you probably will get the one for your carrier. I found the stock ROM for my carrier and I'm from chile, you shouldn't have any problems with that. Well, good luck, CM7 is by far the best ROM I've flashed.
Oh another thing, go for the latest nightly since the battery life is incredibly improved over the RC (or was it stable?) version.
Thanks !
tomascunill said:
Anyway if something happens to your phone and you dont have any ROM on your sd card but you have CWM recovery installed (which is almost everytime the case) then in CWM there is a mount usb stoage option. With it you can easily transfer .zip ROM files to flash, or even a nandroid backup you saved in your PC.
Click to expand...
Click to collapse
Awesome ! This is exactly what I was looking for. I haven't dived into all the options of the CWM, so didn't know that this feature existed.
Also, many thanks for explaining most of the things in a single concise post, it was very helpful. I'll have to check the ROM flash with Odin, so I will search for that thread and have a go through it later today.
Once I get a hang of CM7, I'll go in for the nightlies as well. And yes, I did read about the CM7 guys revert the status to an RC because of the bugs reported, so will give it a try once I definitely know what I'm getting into .
Thanks again,
Ish.
cheemais said:
Awesome ! This is exactly what I was looking for. I haven't dived into all the options of the CWM, so didn't know that this feature existed.
Also, many thanks for explaining most of the things in a single concise post, it was very helpful. I'll have to check the ROM flash with Odin, so I will search for that thread and have a go through it later today.
Once I get a hang of CM7, I'll go in for the nightlies as well. And yes, I did read about the CM7 guys revert the status to an RC because of the bugs reported, so will give it a try once I definitely know what I'm getting into .
Thanks again,
Ish.
Click to expand...
Click to collapse
Well good luck! Tell me if you get any problem.
Hello, sorry if this has already been answered but I did look around at similar scenarios and it seems to me that using odin to flash the stock kernel should fix it but on my device, however, it doesn't fix my problem. I beleive what I did was select update firmware from .zip in clockwork on accident. Idk if this is what you consider a "boot loop" because it doesnt restart it just sits there at the black galaxy s2 screen. Any insight would be great. I hate to have to buy a new one as it is quite alot of money. Like I said, sorry if this is already answered but after looking around for hours I still hve had no luck. Thanks in advance, Alex
Can you get into recovery (volume up+home+power) or download mode (volume down+home+power)?
I can get in to download and recovery mode both
The outlook is promising then. Without knowing what you've flashed, it's impossible to say what damage you've done, but if you don't mind losing your data, you can certainly get back to a working state by following [READ THIS] Got a Boot Loop? Don't post a New Thread!.
Before going down that route though, if you do want to keep your data, let us know what you flashed as it might be recoverable (maybe you just flashed the wrong kernel).
I can't say for sure what i flashed but I can say that i either flashed with an update or updated with a kernel??? sound right??? idk. the data isnt near as important to me as the 680 dollars my carrier will charge me for a new s2. Right now im using a junk alcatel tribe and im going through galaxy withdrawls.
Well before flashing anything else, make sure you definitely have an I9100, not some other variant (I notice you mentioned dollars). If you have a different model, you're in the wrong forums and might make things worse by following advice for the I9100.
I was pretty sure that it is the I9100 but i took the battery out and double checked. it IS the I9100
also for what it's worth when going into recovery(stock version) right after the text reading updating application it gives me an error in red. (E:install_application_for_customer:Can't unmount /preload copy application failed) and after the (Appling [yes it really spells it appling] Multi-CSC) it says Can't access to '/system/csc/TTT/system/'. However, the line after it says that it says Successfully applied multi-CSC
My first attempt to get back to a working phone without losing data would be to flash a stock kernel then, have you tried that?
Ok.. done.. but it still sits at the galaxy screen except now it has the triange due to the custom firmware
If that hasn't got you up and running then it's probably time to bite the bullet and follow the instructions from the boot loop thread linked above (which will also remove the triangle).
Maybe you can answer another question for me. When in recovery mode it says apply update from sdcard... why does it say that when it doesnt actually read from the sdcard? i have checked with the sdcard both in and out and the file directory in the recovery mode doesnt change. is it calling the usb storage an sd card?
ok when flashing a stock rom do i use the phone option in odin or the pda still
If you're flashing a stock rom from [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download, then just follow the instructions from there (but usually PDA).
:'( Still wont boot.
What does happen, did any steps fail, any error messages?
Everything went smooth with no errors. No steps failed. Sitting at the boot screen is all it does though
Did you definitely wipe user data? (step 3). The final step of that thread is to try flashing a ROM which wipes, such as (non-stock) VillainROM 1.1.
well... yes i definitely wiped the user data and it was successfull when doing so. I didnt try the villian rom just because I thought that it was an optional thing but i will def. try it now that you bring it up. and hey, i really appreciate the help no matter what the outcome
(VillainROM 1.1 - XWKE7 base) I'm a UHKG7..... is this going to be a problem? just something i noticed and thought I would ask before going ahead
Hello all,
I have a question that has not been answered after many hours of searching. Hopefully I'm just dumb, and my buddy's stock firmware and data isn't hosed. I'm trying to get his stock firmware running again so I can back it up safely.
What I've done:
Tried to flash CWM's update.zip via stock recovery (signature verification failed on the three different zip's I could find in the forums and various links)
Used Heimdall to push "cmenard-T959-CWM" zImage (this worked, and I get a different screen at boot)
The phone boots to the point of the T-Mobile splash screen with the annoying shriek sound, but goes to a black screen after. If i touch any of the soft buttons, they light up and remain lit. It'll stay like that for at least 20 minutes.
Is it possible to re-flash the system partition and not the data partitions using ODIN? Is that even feasible? Like I mentioned above, I'd like to get the stock firmware running such that I can make a good backup of it with all the user data intact. I haven't been able to because the CWM+root wouldn't flash.
Any suggestions or insight would be greatly appreciated.
thanks in advance!
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Toast6977 said:
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Click to expand...
Click to collapse
Thanks for the suggestion, Toast. I don't believe the internal SD has been messed with, and I don't plan to mess with it either. The thread you linked is not quite related to my issue, as far as I can tell.
I am able to get into Download Mode, and the Stock Recovery mode as well. However every time I try to flash an 'update.zip' with the Stock Recovery, I get an error about Signature Verification Failure.
After stepping back from it for a day, I think I've gained some clarity. Since all I've done is flash a different Kernel with Heimdall, I'm going to try to flash a stock kernel then see what happens.
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Toast6977 said:
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
Click to expand...
Click to collapse
Woodrube said:
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Click to expand...
Click to collapse
hahaha poltergeist!
Wow, so I'm glad I asked. I wouldn't have known about this issue, as I do not have any history with this device.
I know that the ROM is currently 2.2, and the Android System Recovery is showing "3e".
If I understand correctly, once I'm ready to flash up to ICS, I'll need to ODIN back to 2.1 to get Android System Recovery "2e", which will let me flash 'update.zip' packages freely. Then I flash an 'update.zip' to get CWM, then flash CM7, then CM9 (and CM9 is my intended destination).
The things mentioned in the thread you linked do appear to apply to my situation.
However I still want to get the stock OS booted and working, then do a Nandroid backup of it. (it's the computer tech/security pro in me. Since I'm new to this device, I -tried- to read up on everything first, and didn't want to make a change without being sure it would work.)
Does anyone happen to know if flashing a stock kernel over the 'cmenard' kernel will harm anything, and hopefully get a successful boot? Again, I'm trying to get the stock ROM booting again in order to verify I have everything I need off of it, then do a nandroid backup. Flashing to CM9 will come afterwards.
Ok, here are some things for you.
Here is a kernel pack that you can use. Read the OP because there are Froyo AND Gingerbread kernels in there.
[KERNELS] Moped_Ryder SGS Kernel Pack v2 [20+ Froyo/GB Kernels]
I really suggest using something like BaliX 1.2 or BaliUV kernels to make your back up. They are smooth, fast and OC/UV-able. To flash just Wipe /cache, /dalvik -> flash kernel -> Wipe /cache, /dalvik (I also fix permissions too bc that is the way that I learned and I just do it that way all the time). Reboot and Bam!! you should be able to get to the point that you can make a backup.
Look in my signature, there are downloads and flashables that are direct download linked. There is also an ICS install guide that can help your journey. Once you have your backup, then use Odin from the Toolbox in my signature and flash back to stock JFD. From there you will be able to follow my guide.
If you need any files, just let me know and I will upload them when I get home (won't be until late though, i have plans right after work).
Using HB, can I choose any theme? I am not so acquainted with the Theme chooser and boot animation of my phone. I flashed a boot animation zip yesterday and it was stuck in "ANDROID" screen. So I have to flash again. I never used any boot animation and themes in my phone yet. I want to know about them.
Sent from my SGH-T959 using xda app-developers app
Wrong thread. Put that question in the Jelly Bean Banter thread. No need to hijack this thread until we get OP up and running.
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
maxpeet said:
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
Click to expand...
Click to collapse
Wrong they are not the same. cwm can do the work without a PC beside you can erase, back up , restore and flash, which make our life easier, heimdall or Odin ," I prefer odin "are the last option when you can't fix it with cwm
To fix your phone use Odin or heimdall and go back to stock don't worry all your files, photo, music, will be safe. Then
1 get root on you , if you don't how ask
2 get cWm
3 do a nandroid back up
4 have fun flashing all roms you want lol
Sent from my SGH-T989 using xda app-developers app
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Toast6977 said:
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Click to expand...
Click to collapse
do no check de re-partition button and use a .pit file follow this tutorial and you will be fine
http://forum.xda-developers.com/showthread.php?t=848737
Hello all,
I have tried many things before asking for help, but nothing worked so far.
Here is the story:
I was on ICS 4.0.4, with default ROM coming from carrier.
I wanted to install CM9.1,
spent countless hours doing all backup and reading tutorial.
Tried finally yesterday and it was stuck doing "wiping data". Left it for 20min+ and nothing.
After restarting it, it is now stuck on the boot logo.
I couldn't enter anymore CWM or stock recovery (up+home+power), but could enter Download mode.
So I tried a couple of things I have read on the forum, like installing Siyah-s2-v5.0.1.tar through Odin 3.04 but I still cannot enter recovery mode.
I've read (too late) about the mmc brick bug (couldn't find anyone speaking about it in any tutorial until I reached this point... nothing on CM wiki or in other tuto... classic!).
I hope I'm not in this case though as I can still go to DL mode, and the phones having the brick bug are completely dead (blank screen or no DL mode), as per http://forum.xda-developers.com/showthread.php?t=1756242
I managed to finally get CWM working only by using GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar from Odin, then tried to install CM9.1 from SD card but after reboot it is stuck on the blue cyanogenmod animation boot screen and nothing happens.
Tried also to restore from CWM my nandroid backup, but during the restore it seems to hang then restart by itself, and then I'm back to Galaxy S boot logo (the animated one with the big S).
And after this I have lost again access to recovery mode.
I can't go back to stock and I can't install CM... I was not expecting such issues, it all seemed pretty basic on paper.
I'm really stressed and don't know what to do
Flash a stock rom in Odin (download mode), re-root your phone/flash a kernel with CWM, restore your backup ?
Hi,
thanks for answering,
I have tried to locate such a rom, but I'm not sure which one... is there a specific one to try ? could you point me to it please ?
so far I have tried I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
but no luck
you also say "re-root", at the time I used this method:
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel - xda-developers
http://forum.xda-developers.com/showthread.php?t=1501719
Do I need root to install Siyah kernel from Odin ?
I'm trying one from sammobile... let's hope :/
The bad thing is I had no Yellow triangle at the beginning since I'm stuck in this boot loop or no boot to be precise.
Now that I have tried different things to fix it, it is still not working and I have my flash counter = 10.
I cannot even go back to the shop, is there a way to reset it knowing I cannot even reach the OS, I have only DL mode or CWM...
Use a stock rom for your region/carrier (or any stock rom from any region really), it doesn't really matter as I presume you'll be restoring a backup and/or going back to a custom rom anyway won't you ?
Samfirmware & AndroidFirmwares.net have lots of stock roms.
No, you don't need root to flash an Odin version of Siyah. So yes, you can flash that after you've got stock up & running to root your phone rather than re-rooting your phone by flashing a CFRoot kernel or using another root method. Just make sure the version of Siyah you're going to flash matches up with the stock rom you've got on (I.E if you flash a GB stock rom use GB Siyah, ICS stock = use ICS Siyah, etc, etc).
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Don't worry about the flash counter. That's the least of your problems while your phone is borked Worry about it when it's fixed. There's nothing you can do about the triangle while your phone is cactus.
When you've got it up & running again, use Triangle Away.
But first things first.
---------- Post added at 04:02 AM ---------- Previous post was at 03:59 AM ----------
You're welcome.
Um, no. Absolutely not. Nothing personal, but if I did that for every person who's asked me for 'hands on' help since I've been here, I'd have spent my time doing nothing else. I don't do 'personal' with people from XDA (which is why I have PM's blocked except for mods).
Besides, you're going to learn much more fixing this yourself. I've given you a stack of information thus far, ball is in your court. Every answer to every question you could possibly ask is on this site. It just sometimes takes a bit of work/reading on your part to find it.
megosu said:
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Click to expand...
Click to collapse
ok I understand.. it is just I have literally spent more than 8 hours on it and had not make any progress at all (even worse I cannot return it to the shop because of the yellow triangle).
I appreciate your help, it gives me a bit of hope but I'm in a very bad situation and I feel I have read and do so much already with no success at all.
I will try your option of restoring the one from Sammobile, I have tried other before without any luck, maybe this one will do... (5min left to DL it).
thanks again for your support
I know where you're coming from. The first flash I tried when I got my phone in 2011 borked because I was careless, and it took me a bit over a day to get the right info/files/etc to get it fixed. I know it's frustrating/tiring/annoying & you're wondering at the start whether you can even fix it. But as long as you've got download mode 99 times out of 100 you can save it.
And as I said, it's good experience; once you've fixed it, you'll be able to handle anything that comes up in future
Let us know how you go. I'm going to bed shortly, but I'm sure someone else will step up & help if you have any further problems.
You're welcome Happy to point you in the right direction.
I have flashed the rom, the exact same one as I had before everything happened...
if it helps, I flashed it from Odin 3.04 as PDA.
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5
I'm now back to the Samsung GALAXY S2 GT-I9100 logo and nothing happens.
I cannot use recovery mode,
I can use DL mode (it shows 11 counts and current binary as Samsung official.)
update:
I left the phone on the first logo for about 5min and it moved to the next Samsung Galaxy S2 logo, with the big animated S.
I'm waiting but nothing else is happening.
I'm still desperate to fix it.
One thing which can be relevant, whenever I try to wipe or format /data from CWM, my phone is restarting after a few minutes or is saying it cannot be done.
I can format /cache and /system.
Could it be the root cause ? Any way of fixing it ?
Thank you
update: I cannot mount /data from CWM, it says Error mounting /data!
is it the brick bug ? :|
Easy now....your device is still good.
Those animations should take like 1-2 mins when you flash a rom.
Now, you are completly sure that you are actually flashing the right ROM for your device model?
If so, just keep flashing stock roms until you're up and running again, so you can start from scrap.
I tried, the issue is as soon as I flash a stock rom (through Odin), then I can't get into stock recovery mode anymore, I have to flash GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar to get back the recovery mode.
I tried to flash several times, I think it is down to the fact I cannot mount or format /data.
Which is why I'm wondering if it is the famous brick bug.
My device is GT-I9100 and I took the stock rom from sammobile:
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 which is ICS 4.0.4 (that I had before trying to move to CM9.1 and having all this mess in my hands.)
flash this:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/.
you are on siyah kernel right?
what you wanna do know is to get to whatever rom your flashing, forget about cmw for now.
this also might help:
http://forum.xda-developers.com/showthread.php?t=1457458
So it is not lost yet ? Not the brick bug ?
just to be sure:
you want me to install through Odin: Siyah-s2-v5.0.1-CWM.zip
then going back to DL mode
I flash through Odin: I9100XXLSJ_I9100OXXLS1_OXX.zip (coming from your link).
anything I'm missing (even if it seems obvious, please let me know as I'm maybe missing something important)
?
I still cannot do Factory reset... is it a problem ?
I dunno what kernel you are using, If stock 4.0.4 kernel you should flash siyah first (safe kernel, no brick bug), and then countinue flashing the ROM. Check out the brick bug thread in general SII forum for directions if you want.
BTW, Odin recognizes your phone right? Check it out, you'll get a huge long breath.
BTW 2: you don't have any kies applications running in your pc.....am I right? if so, CLOSE THEM ALL!
I did had stock 4.0.4 kernel when I first tried to follow CM9.1 wiki, and I did a factory reset through CWM... which is why I think I might have bricked it...
I have checked the brick bug thread (too late it seems...) but so far I can't be sure if I'm in this case or not as they say they can't even reach DL mode, and I can.
Odin recognizes my phone, yes, but anything I flash is stuck on the animated logo.
I do not have Kies installed, just installed the drivers.