Hi all!
I found a thread on the same topic, sorry if it is not
I have a problem with flash Gingercruzt 2.2 to 2.3.
1) Use XXKPP Stock ROM and modem from Latin America (Chile)
2) Flash Gingercruzt 2.2 (Wipe + / format system) PASS
3) Flash Gingercruzt 2.3 FAIL
Result: Bootloop
I also tried flashing from CM7.1, but the same result.
I left the 2.2, very fast, stable and good (and sexy). Plus a couple of tweaks & scripts
Cheers
Aided by google translate xD
You flashed v2.3 with wipe?
Dont wipe any thing while install v2.3
Well if its not solve prob then just do one thing extract v2.3 rom and replace frameworkres.apk in system/framework/ with normall cm7.2 frameworkres.apk then zip rom and flash now no bootloop
as prob was of frameworkres.apk
now after flash
install frameworkres.apk of gingercruzt v2.3 using update script or adb push or just tell me ill give it
nims11 said:
You flashed v2.3 with wipe?
Dont wipe any thing while install v2.3
Well if its not solve prob then just do one thing extract v2.3 rom and replace frameworkres.apk in system/framework/ with normall cm7.2 frameworkres.apk then zip rom and flash now no bootloop
as prob was of frameworkres.apk
now after flash
install frameworkres.apk of gingercruzt v2.3 using update script or adb push or just tell me ill give it
Click to expand...
Click to collapse
Hi
I flash from 2.2 to 2.3 with and without wipe ... any form of work
I'm very bad with shell. I would prefer if you could send the script C:
Thanks for you help !
PS: At night I'll try to unpack the ROM and extract the APK's
http://db.tt/45Ub4Bf4
after successfully booted with v2.3 install by cwm
Thanks friend, ran to the first
nims11 said:
http://db.tt/45Ub4Bf4
after successfully booted with v2.3 install by cwm
Click to expand...
Click to collapse
What is the different if i flash it??
Pls correct my English ;-)
Sent from my GT-S5830 using xda premium
This is how I successfully installed it:
1. Wipe data/factory reset
2. Flash GingerCruzt 2.2
3. Reboot twice
4. Flash GingerCruzt 2.3
I had a bootloop when I installed GingerCruzt 2.3 without rebooting first, and I noticed you did not put rebooting in your procedure.
udhien28 said:
What is the different if i flash it??
Pls correct my English ;-)
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
It's like changing the interface .... or theme. is reflected in the status bar and other details.
adeklipse said:
This is how I successfully installed it:
1. Wipe data/factory reset
2. Flash GingerCruzt 2.2
3. Reboot twice
4. Flash GingerCruzt 2.3
I had a bootloop when I installed GingerCruzt 2.3 without rebooting first, and I noticed you did not put rebooting in your procedure.
Click to expand...
Click to collapse
Really? Did not try that way when I did the flash. But do not worry until update 2.4
neotenshi said:
It's like changing the interface .... or theme. is reflected in the status bar and other details.
Click to expand...
Click to collapse
I can't feel the deference after flash this..
Pls correct my English
i don't have prob when flash gc2.3 , just flash 2.2 on cwm 5 ,reboot and flash 2.3. it work as should it be without prob
neotenshi said:
Hi all!
I found a thread on the same topic, sorry if it is not
I have a problem with flash Gingercruzt 2.2 to 2.3.
1) Use XXKPP Stock ROM and modem from Latin America (Chile)
2) Flash Gingercruzt 2.2 (Wipe + / format system) PASS
3) Flash Gingercruzt 2.3 FAIL
Result: Bootloop
I also tried flashing from CM7.1, but the same result.
I left the 2.2, very fast, stable and good (and sexy). Plus a couple of tweaks & scripts
Cheers
Aided by google translate xD
Click to expand...
Click to collapse
Same problem for me too friend.. if you found any solution for this please reply my post. please help me to solve this problem. i am not able to install other rom also...
i am waiting
thanks
az28 said:
i don't have prob when flash gc2.3 , just flash 2.2 on cwm 5 ,reboot and flash 2.3. it work as should it be without prob
Click to expand...
Click to collapse
yes it is The correct way
Related
NOTICE: This isn't my work. I've just followed this thread http://forum.xda-developers.com/showthread.php?t=963162 to make it work on X8
All thanks goes to zdzihu for xrecovery and offline charging fix and to genyt and weissgold for their guide
For stock 2.1.1.A.0.6 firmware (don't work with custom roms):
Installation:
1. root phone
2. install Busybox
3. download xrecovery with offline charging.zip
4. extract archive to SD Card
5. with Root Explorer put extracted files to /system/bin
Or install latest xRecovery with FlashTool 0.2.8
For custom roms you also need the files in /system/etc/semc/chargemon/ from stock ROM.
ponanovn said:
For custom roms you also need the files in /system/etc/semc/chargemon/ from stock ROM.
Click to expand...
Click to collapse
Thanks for advice, I'll try it.
Help! I have a problem. I copied files to "/ system / bin", and now does not work xrecovery. and when I turn on my mobile no applications are launched, the application has stopped unexpectedly
I have version 2.2.1 CM Floyd v0.15
please help!
sorry for my english
dbts25 said:
This is for stock 2.1.1.A.0.6 firmware!!!
Don't know if it works with older firmware or with custom roms
Click to expand...
Click to collapse
I said it in first post that it is for stock firmware. If you want it for floyo I can try to make it work too. You must reinstall firmware with SEUS or FlashTool and install Floyo again
daanieloow said:
Help! I have a problem. I copied files to "/ system / bin", and now does not work xrecovery. and when I turn on my mobile no applications are launched, the application has stopped unexpectedly
I have version 2.2.1 CM Floyd v0.15
please help!
sorry for my english
Click to expand...
Click to collapse
you should read the first post clearly mate
dbts25 said:
I said it in first post that it is for stock firmware. If you want it for floyo I can try to make it work too. You must reinstall firmware with SEUS or FlashTool and install Floyo again
Click to expand...
Click to collapse
thank you very much friend
just asking...does it makes stuck on boot?(offline charging for floyo 0.15)...sorry if i ask this thanks before mate...
progress : after installed my phone get force close all app...i use offline charging floyo 0.015 on my floyo
Don't know where is problem. For me it runs ok
i have follow the instruction clearly...or it should be install the xrecovery files first from the attachment(that seems x10 xrecovery..if i'm not wrong) and then copy those floyo offline charging files?...for you it runs ok,but not on my phone.so wierd isn't it?
Yes it is weird. You don't need to install xrecovery it is preinstalled in floyo. You only need to put chargemon and charger to /system/bin and semc folder to /system/etc
yep...that was i'm doin' as your instructions...twice i try and unsucsessfull,the x recovery can't runs when i pressing the back button on booting...
fully working on stock 2.1.1.A.0.6 THANKS!
I'm stock in sony ericsson logo..
Will this work on a CM7 2.3.3 ROM as well?
Roland
Rolandh said:
Will this work on a CM7 2.3.3 ROM as well?
Roland
Click to expand...
Click to collapse
No. In which one? I can try to make it work
dbts25 said:
No. In which one? I can try to make it work
Click to expand...
Click to collapse
I'm using jerpelea Gingerbread CM7 2.3.3 RC 2 v006a.
Roland
Hi ! I just created a mixed rom for the nexus one !
Base :
RCADSmixHD[gbSENSE2.1,3.0,720p,tb unlock] v1.6
[ROM] LeeDrOiD HD V3.3.3-Port-R5 |11th August| Ginger Sense 2.1 | FAST | STABLE | WWE
# Google Android 2.3.3
# HTC Sense 2.1
# Rootet
# Requires a SD-EXT Partition (at least 512 MB)
# Flashable via Armon Clockwork Mod Recovery 2.x.x
I used this Manual with some modifications. The Rom should fit now into the Nexus One Parition.
I see no chance to fix the boot / kernel issues until Desire GB Kernel Source Code is available ! So , PROJECT ON HOLD , SORRY...
waiting for the new link
Deep-Knight said:
Hi ! I just created a mixed rom for the nexus one !
Base :
RCADSmixHD[gbSENSE2.1,3.0,720p,tb unlock] v1.6
[ROM] LeeDrOiD HD V3.3.3-Port-R5 |11th August| Ginger Sense 2.1 | FAST | STABLE | WWE
I used this Manual with some modifications. The Rom should fit now into the Nexus One Parition.
If someone want to test, feel free and please report back feedback and adb log´s .
Maybe the Rom is booting and we can work together to get it done
Download here V0.0.1
Link is broken, i currently reupload the pack...could take about 40mins
Click to expand...
Click to collapse
Hi there,
First of all thanks a lot for your time (and patience) to cook a sense + 2.3.x based ROM for Nexus One. I will try your ROM later this week and provide feedback.
1 question though, have you added support for track-ball wake in your ROM?
chota_shivaji said:
Hi there,
First of all thanks a lot for your time (and patience) to cook a sense + 2.3.x based ROM for Nexus One. I will try your ROM later this week and provide feedback.
1 question though, have you added support for track-ball wake in your ROM?
Click to expand...
Click to collapse
No TB Wake up included. I currently not even tried to boot the rom... I currently dont have enough time to install & test. But i hope i´ll get some feedback and logs to get this done...
Link is up again! Look on first post...
Hi, i just tried to install the rom and it says: update script is missing ... so its not possible to install it. I am on CM7 latest nightly and amon ra recovery-wiped all and tried several times but no success
dulexetina said:
Hi, i just tried to install the rom and it says: update script is missing ... so its not possible to install it. I am on CM7 latest nightly and amon ra recovery-wiped all and tried several times but no success
Click to expand...
Click to collapse
Argh ! I see. META-INF\com\google\android\update-script is missing... I dit a misstake and named it updater-script :-(
Download and extract the attached ZIP file & integrated the files to the full-package (downloaded from first post). After that, try install.
UPDATED 11. SEP 2011 THIS FILES MUST BE INTEGRATED INTO FULL PACK, IT INCLUDES THE LATEST FIXES !
-> CURRENTLY NO FIX FILES AVAILABLE !
anyone try it yet?
Deep-Knight said:
Argh ! I see. META-INF\com\google\android\update-script is missing... I dit a misstake and named it updater-script :-(
Download and extract the attached ZIP file & integrated the files to the full-package (downloaded from first post). After that try install again.
Click to expand...
Click to collapse
Inserted this file to ur rom,but now it says eror line 6 or code 6 ,and install stops again- not sure anymore... Serbia has lost from France for a single poen so i am not quite ok
Please look into it so i we can test the rom. thanx
dulexetina said:
Inserted this file to ur rom,but now it says eror line 6 or code 6 ,and install stops again- not sure anymore... Serbia has lost from France for a single poen so i am not quite ok
Please look into it so i we can test the rom. thanx
Click to expand...
Click to collapse
Thanks for the Information. Ill look into the script.
Install Script is updated
PLEASE DO A NADROID BACKUP BEFORE TESTING.
AFTER THAT DO A FULL WIPE, CLEAR SD-EXT , FORMAT DATA... BEFORE TESTING THIS ROM !
Deep-Knight said:
Thanks for the Information. Ill look into the script.
Install Script is updated
PLEASE DO A NADROID BACKUP BEFORE TESTING.
AFTER THAT DO A FULL WIPE, CLEAR SD-EXT , FORMAT DATA... BEFORE TESTING THIS ROM !
Click to expand...
Click to collapse
First thread updated with some informations & instructions...
Does the ROM install now ????? There are some Downloads, any feedback please ???? Only together we can bring up a 2.3.3 Sense Rom !
Deep-Knight said:
First thread updated with some informations & instructions...
Does the ROM install now ????? There are some Downloads, any feedback please ???? Only together we can bring up a 2.3.3 Sense Rom !
Click to expand...
Click to collapse
OP, are you testing this rom in your own phone?
Menelkir said:
OP, are you testing this rom in your own phone?
Click to expand...
Click to collapse
Currently no, because i dont have time & have only one phone, i need for work. Ill try the rom on my weekend... I thought that there are some devolpers are here and interested in helping me...
The Rom was build with the two bases and should , after install is working, at least boot up with "some" issues. So we can get ADB Log´s to work with...
Deep-Knight said:
Currently no, because i dont have time & have only one phone, i need for work. Ill try the rom on my weekend... I thought that there are some devolpers are here and interested in helping me...
The Rom was build with the two bases and should , after install is working, at least boot up with "some" issues. So we can get ADB Log´s to work with...
Click to expand...
Click to collapse
Yeah but I think will be more difficult and hard to debug in that way.
I have the same situation as yours (only one phone and use it to work), so when I need to test it, I usually go for 10pm to install at least one time to check if everything is working.
Deep-Knight said:
First thread updated with some informations & instructions...
Does the ROM install now ????? There are some Downloads, any feedback please ???? Only together we can bring up a 2.3.3 Sense Rom !
Click to expand...
Click to collapse
The rom does not installs again- still using cm7 nightly,amon ra recovery,ext4 partition 768mb (0 swap size),radio 5.12 and latest hboot....
It says : E:eror in/sdcard/nexus-one.zip (Status 6)...
I have included latest fixes u provided in nexus one zip file,also full wipe (of course)...
Hope it can help
dulexetina said:
The rom does not installs again- still using cm7 nightly,amon ra recovery,ext4 partition 768mb (0 swap size),radio 5.12 and latest hboot....
It says : E:eror in/sdcard/nexus-one.zip (Status 6)...
I have included latest fixes u provided in nexus one zip file,also full wipe (of course)...
Hope it can help
Click to expand...
Click to collapse
The pack is not signed, have you disabled verification ?
I can't flash it with CWM 5.0.1.0
I have put the update script
sawewrong said:
I can't flash it with CWM 5.0.1.0
I have put the update script
Click to expand...
Click to collapse
Yes, you can only flash it with Amon Clockworkmod Recoveryx 2.x.x
Deep-Knight said:
The pack is not signed, have you disabled verification ?
Click to expand...
Click to collapse
Of course i did.
Please try to install it yourself and if u manage to do that write for others how to. I have no time for few days from now.
Thanx
Nice.. would you mind sharing some screens. And are there any issues with this ROM?
fabler said:
Nice.. would you mind sharing some screens. And are there any issues with this ROM?
Click to expand...
Click to collapse
Currently this is only a DEV Rom to get Logs & new Informations.
Right now i try to fix the install script, so that we can boot up this new ROM , after that we can se what is working & what needs to be fixed...
Hi all, yesterday following all the steps to update the rom in my mini X10 Pro v13 Gynger DX, and after the restart came the letters of Sony Ericson, and then I got the dx Gynger Android, but it does not leave , makes loading and until it reaches a point that stands still and I can not turn it off or do anything if you do not remove the battery.
I tried to get into recovery and do not and will not let me do if I could say that to appreciate it.
My steps to install are as follows:
1 .- Root
2.-titanium back up
3 .- install recovery
4 .- I back up the phone
5 .- Install dalvic room before cleaning cache battery and the other
Do not know if this might influence something under the previous step fix got permission, and by mistake instead of giving back I gave the square button and run me.
6 .- installed room
reboot and after that I caught the screen is in the dx gynger v13 Android and will not let me enter Xrecovery.
Well, I do not understand much about it but I use this rom and never had that problem. I will try to help you. If you can not enter to xrec, you would have to use SEUS and install the official rom, and try again from the beginning. I recommend you use cwm to install the rom, not xrec. After installing the rom make a wipe data / factory reset.
Hope this helps! Sorry my English.
1) What is the baseband on your phone
2) Did you install with Xrecovery or CWM?
3) Do you have an x10 mini pro or mini (I.e do you have a slide out keyboard)?
@ Kunaguero
I try to use SEUS and hopefully that works, and for installing it again proves safely from CWM. Do not worry about your English I'm not too loose, use google to translate lol. Thanks
@ Timmyhate:
1 .- 2.1.1.A.0.6 and M76XX-version-53404015 TSNCJOLYM
2 .- XRecovery
3 .- I have a mini pro
Solved
I repaired with Pc Companion and I have my mini pro x10 2.1.1.A.0.6-in version
Thanks for the advice and help, I thought I had it loaded and I already had a brick jejeje
Good for you!
To install GingerDX try this guide:
1st - download and run it:http://forum.xda-developers.com/showthread.php?t=913136 - to root and install xrec on your phone.
2nd - download your rom
3rd - make a backup using xrec
4th - choose install custom zip and select zip from sd card
obs.: WIPE YOUR DATA BEFORE!!!!
5th - wait
6th - reboot
7th - configure
8th - Thats ready to ROCK with custom roms!!!
XxLordxX said:
To install GingerDX try this guide:
1st - download and run it:http://forum.xda-developers.com/showthread.php?t=913136 - to root and install xrec on your phone.
2nd - download your rom
3rd - make a backup using xrec
4th - choose install custom zip and select zip from sd card
obs.: WIPE YOUR DATA BEFORE!!!!
5th - wait
6th - reboot
7th - configure
8th - Thats ready to ROCK with custom roms!!!
Click to expand...
Click to collapse
I´ve heard so many good things about GingerDX, right now i´m using MiniCM7 Pro - V9, is a good rom very stable, the only thing about this rom that i don´t like is the camera i´m not able to record high quality.
Here are my questions, What improvement ginger dx can offer me? Does it have a better camera app than MiniCM7 Pro - V9? assuming that i want to give it a try, Can I install this rom using CMW instead xrecovery? and my last question, Do I need to make a backup or is up to me?
Thanks for the guide
Camera is fully working with GingerDX. And i recommend install via CMW, no xrec.
kunaguero said:
Camera is fully working with GingerDX. And i recommend install via CMW, no xrec.
Click to expand...
Click to collapse
Which version of Ginger DX do you recomend me to install?
I noticed that there are 2 post with the name Ginger DX V13, Are there any diferences between those posts?
This are the posts i´m talking about:
http://forum.xda-developers.com/showthread.php?t=1225668
http://forum.xda-developers.com/showthread.php?t=1198941
Thanks for the recomendation.
I'm using GingerDX v13 ported by Eyama (http://forum.xda-developers.com/showthread.php?t=1198941)
Here is the post of the lastest version: Link v13
And here the link of the hotfix: Link Hotfix v13
Check out the thread for more information about this! GL!
kunaguero said:
I'm using GingerDX v13 ported by Eyama (http://forum.xda-developers.com/showthread.php?t=1198941)
Here is the post of the lastest version: Link v13
And here the link of the hotfix: Link Hotfix v13
Check out the thread for more information about this! GL!
Click to expand...
Click to collapse
Hey amigo, Do you know if i need to do some adjustments to the rom, after i install the rom and the hotfix?
I'm asking you this because of my experience with minicm7 pro v9 from paul_xx, I had to do some things to fix the rom.
Thanks for the links amigo
you don't have to do anything, the only thing is after you flash the hotfix, you will not be able to control the brightness. There is a solution for it. You can edit the hw_config.sh file in /system/etc replace some of the lines in the beginning with this in the link
http://forum.xda-developers.com/showpost.php?p=17491527&postcount=1650
Monarcave said:
Which version of Ginger DX do you recomend me to install?
I noticed that there are 2 post with the name Ginger DX V13, Are there any diferences between those posts?
This are the posts i´m talking about:
http://forum.xda-developers.com/showthread.php?t=1225668
http://forum.xda-developers.com/showthread.php?t=1198941
Thanks for the recomendation.
Click to expand...
Click to collapse
I recommend you this http://forum.xda-developers.com/showthread.php?t=1198941 used by the most users and have all the news before the other post.
Man sorry for that, that occurred because when I did that post (I copied from other post I did) I was using xrec, but CWM is much better. And kunaguero, I want to correct you: until D4 or slade don't do a new kernel that can do that, we can't record in HD. But let's wait to see what happens
Is it possible to make Galaxy S3 launcher for Defy (Android 2.3.x)? Sorry if the thread already exist,but I cant find it for Defy. Thanks!
markos807 said:
Is it possible to make Galaxy S3 launcher for Defy (Android 2.3.x)? Sorry if the thread already exist,but I cant find it for Defy. Thanks!
Click to expand...
Click to collapse
here: http://forum.xda-developers.com/showthread.php?t=1666384 works with all ICS-ROMs
I think there is no hope for ROMs under 4.0.x :/ But i can be wrong, don´t know.
No chance for version that works under 4.0
markos807 said:
Is it possible to make Galaxy S3 launcher for Defy (Android 2.3.x)? Sorry if the thread already exist,but I cant find it for Defy. Thanks!
Click to expand...
Click to collapse
Nopes . Dump the ginger and have some ice cream
And what ICS rom do you suggest for me? And do I have to flash froyo .sbf before flashing ICS rom? Thanks alot guys!
Which defy do you have? Green lens or red lens... or a defy +
Sent from my MB525 using xda premium
Green lens Defy
markos807 said:
Green lens Defy
Click to expand...
Click to collapse
So u can take quarx' for defy or epsylon's latest nightly.
What ROM r u now?
MIUI Pikachu 2.3.7
I`ll take epsylon`s latest nightly ROM. Can you help me to choose one because I`m really confused. I dont know which one to download,I live in Serbia,Europe,if it is important. What version to choose from here? Its the index of CM9 roms for Defy. Thanks!
Flash epsylon3's latest cm9 froyo build ... data wipe, cache wipe, dalvik cache wipe... flash the latest froyo kernal, then the latest build, n then latest gapps... then wipe data, cache,dalvik cache again. reboot enjoy.
Kernel: http://defy.wdscript.fr/kernel/kernel-froyo-222-179-4-signed.zip
Rom: http://defy.wdscript.fr/defy-cm9/CM9-NIGHTLY-120714-Defy.zip .
gapps: goo.im/gapps
Bootanimation: http://forum.xda-developers.com/showthread.php?p=28969491
Download the latest ics gapps from there. And also try the new bootanimation i made for defy.
Sent from my MB525 using xda premium
I dont know how to thank you!
And be sure that I'll try your bootanim soon as possible!
No problem, u can hit the Thanks button ..... If u try the bootanimation please share ur thoughts in that thread.
Sent from my MB525 using xda premium
So,just to be clear:
1. Flash froyo .sbf using RSD Lite
2. Root and install some recovery
3. Wipe data,cache,dalvik,everything and flash latest froyo kernel (from your post)
4. Then flash ICS ROM
5. Then flash GAPPS
6. Wipe data,cache,dalvik again.
7. Reboot
Is this correct?
markos807 said:
So,just to be clear:
1. Flash froyo .sbf using RSD Lite
2. Root and install some recovery
3. Wipe data,cache,dalvik,everything and flash latest froyo kernel (from your post)
4. Then flash ICS ROM
5. Then flash GAPPS
6. Wipe data,cache,dalvik again.
7. Reboot
Is this correct?
Click to expand...
Click to collapse
When u reboot the phone wait for the Blue LED. As soon as you see the Blue LED press the Volume Down button, it might take you into the Recovery. I dont think you need to install a recovery. Pickachu Rom might have a recovery already installed. So no need to flash sbf. Either way u dont need to flash SBF. You just have to install a recovery and then follow other steps. You told me that u have pickachu rom right, so i gues its already rooted and a recovery will be built in. or when u press and hold the unlock button , do u get reboot > reboot into recovery.
Yes,and blue light appears everytime I turn on the phone. I know I have a recovery- 2ndinit. So,I just need to wipe everything and flash latest froyo kernel,then ICS,then gapps,and wipe all again?
markos807 said:
Yes,and blue light appears everytime I turn on the phone. I know I have a recovery- 2ndinit. So,I just need to wipe everything and flash latest froyo kernel,then ICS,then gapps,and wipe all again?
Click to expand...
Click to collapse
Yes thats right. You are good to go.
---------- Post added at 02:41 PM ---------- Previous post was at 02:40 PM ----------
krkdesigns said:
Yes thats right. You are good to go.
Click to expand...
Click to collapse
Make sure Your battery level is good. Over 70%
Thank you very much! Gonna flash it right now!
Works like a charm! So smooth for the first boot! Thank you so much,I wish there is more people like on this forum!
markos807 said:
Works like a charm! So smooth for the first boot! Thank you so much,I wish there is more people like on this forum!
Click to expand...
Click to collapse
I dint know anything about these flashing, unlocking rooting until i started following threads everyday. Thanks to the Devs here. Glad it worked. Follow epysylon3's thread for new updates, he also started compiling JB CM10 for defy green lens. Install solid explorer from market its a good explorer and then dfownload the bootanimation from my thread. Go to root/system/media, replace the boot animation.
I tried you bootanimation,and its... too simple,no offense
Try to make,for example, DEFY text to explode,and set M logo to fire or something
Do not download! Currently I'm having some issues with FXP146 and my port isn't booting. Till I fix the problem,please enjoy your FXP146 by FXP team.
For UNLOCKED BOOTLOADER only!!
Instruction
Download the ROM here: http://www.mediafire.com/?g21re4tk7698xc2
Flash the ROM via Recovery
Flash Gapps here http://goo.im/gapps/gapps-ics-20120429-signed.zip
Wipe
Reboot,Enjoy
*If your statusbar is gone after the first reboot: longpress Powerbutton > Toggle Statusbar
If you want to Activate Tablet mode go to Settings > Paranoid Settings > Enable tablet UI
Please,no MIRROR for my ROM
Flash it at you own risk!
Changelog
JellyBean Flavored
Speed Improvement
New SU binary updated (via flashable zip)
New Fonts
Highlights
FXP146 base
Paranoid settings
Common Problems that user had :
1.error 7 ( I don't have the problem?) : extracted the rom.zip you download,flash the boot.img via fastboot.
2. Wifi issue (I never had the problem) : Do a full wipe after flashing the ROM.
3. fonts are too small : configure it by going into Settings>System>Font Size.
4. Wifi turned off when screen is off : (CM9 bug)
5. Apps like Viber doesn't work : Flash Gapps Again,go into Panaroid Settings>enable hybrid mode>list of apps google Play store>set it to default ui and default dpi,and finally,clear app data.
6. SuperUser issues : flash this after the ROM : http://www.mediafire.com/?n9z1i98lv1b1vzl thanks to XDA user Irseq
Bugs
Same as FXP146 (youtube video,camera,etc)
Everything else works
Don't forget to hit the thanks button..
Huge thanks to FXP
reserved
also reserved
This is awesome
I simply LOVE LOVE Paranoid Android, one of the best Custom ROMs ever!
Just google this. Looks AWESOME!!!!!
cant wait man.. cant wait... just this morning i saw it in XPU thread and was really jealous.... now we will have paranoida for our sola too.. thats great
So will there be an actual ROM? What's the use of opening an empty thread?
tinnef said:
So will there be an actual ROM? What's the use of opening an empty thread?
Click to expand...
Click to collapse
The port is completed
Now I have to maintain 3 devices,just so you know
Wait...That's an JB rom for Sola ?!
Charlus97 said:
Wait...That's an JB rom for Sola ?!
Click to expand...
Click to collapse
Mate, its based on FXP 146 which is still ICS, there is no JB for Sola yet.
Camera and Bluetooth working properly?
Sent from my MT27i using xda premium
Screenshot please
Is it OK to get stuck soooooooo long (more than 25 minutes) in bootanimation? ( I guess not )
My Experiments:
I just flashed it with it's own cwm (from boot.img in .zip file) it installed probably.
I installed gaaps and ok again.
when i was about to restart it says root access maybe lost would you mind to fix it?
I enter yes ... stuck
I flash again and enter no ... stuck
flash only rom but not gaaps ... stuck
BTW: I did wipe in every sections! to make sure it's cleen
looks like bootloop is in this rom
sijav said:
Is it OK to get stuck soooooooo long (more than 25 minutes) in bootanimation? ( I guess not )
My Experiments:
I just flashed it with it's own cwm (from boot.img in .zip file) it installed probably.
I installed gaaps and ok again.
when i was about to restart it says root access maybe lost would you mind to fix it?
I enter yes ... stuck
I flash again and enter no ... stuck
flash only rom but not gaaps ... stuck
BTW: I did wipe in every sections! to make sure it's cleen
looks like bootloop is in this rom
Click to expand...
Click to collapse
+1
sijav said:
looks like bootloop is in this rom
Click to expand...
Click to collapse
Same problem here.
The attached part of my logcat seems to be the recurring bit.
THANKS!!!
brendow96 said:
THANKS!!!
Click to expand...
Click to collapse
Did you manage to get it boot?
No
Do we need to flash boot.img of CM9 ? (I know that he rom isn't working for now)
Charlus97 said:
Do we need to flash boot.img of CM9 ? (I know that he rom isn't working for now)
Click to expand...
Click to collapse
yes of course
Send from my MayuSola (まゆそら)