[Q] Xperia mini PRO Freez on start up SE LOGO - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

MY SE Xperia mini pro freez at start up after I update the ROM, anyine can help me pls, i meen i brick my phone any suggest............

Did you unlock the bootloader then accepted the OTA upgrade?
Sent from my ST17i using XDA App

mastrit said:
MY SE Xperia mini pro freez at start up after I update the ROM, anyine can help me pls, i meen i brick my phone any suggest............
Click to expand...
Click to collapse
if you can get into fastboot mode (keep VOL+ and attach usb) - then it's not bricked.. when phone does not go into flash mode or fasboot mod e-then it's briked.

Flash back using wotan client
Sent from my WT19i using xda premium

Download sony ericsson software update service.
Connect your phone while keeping volume up key pressed
The LED should light blue.
Than update.
It happen to me once but above method works.

Related

xperia mini pro stuck at sony ericsson logo

hey guys
tried to install hybrom v16 on my xperia mini pro(sk17i)
bt on rebooting my fone is stuck at de sony ericsson logo
my bootloader hasnt been unlocked bt
n i guess its totaly bricked
i stil have a nandroid bakup on my sd card
bt rely dont kno how to acess it n reinstall
if that atleast wud help me unbrick my fone
pls help
Restore your phone using WotanServer....Google is your friend =)
Sent from my SK17a using xda premium
heyamprince said:
hey guys
tried to install hybrom v16 on my xperia mini pro(sk17i)
bt on rebooting my fone is stuck at de sony ericsson logo
my bootloader hasnt been unlocked bt
n i guess its totaly bricked
i stil have a nandroid bakup on my sd card
bt rely dont kno how to acess it n reinstall
if that atleast wud help me unbrick my fone
pls help
Click to expand...
Click to collapse
Restore stock firmware with Flashtool, as WotanServer is no longer free. You can find stock firmware files from the forum, my tutorial for example(check in signature).
To use Hybrom ROM, you need to unlock bootloader, then install custom kernel and then install the ROM.
The kernel probably already includes Clockworkmod Recovery, so you don't have to install it. Just enter the recovery after kernel installation, wipe data/factory reset, wipe cache and Dalvik cache and then install the ROM.
Thanx a hell lot
I got my phone recovered
Rerooted busy box installed
N tried installin cyanogen 7.1
Some error again :-(
Did is properly
Tried installin cyanogen on x8 long back
Without unlockin boot loader
Worked extremely wel
But here, not happenin :-(
It's very unlikely the ROM you're trying to install requires only the stock kernel, have you double checked the thread to make sure an unlocked bootloader isn't required?
All 2011 Xperia custom ROMs require custom kernel and unlocked bootloader.
Only Xperia UXP NXT ROM can run on stock kernel, every other ROM you must unlock bootloader and install custom kernel.
Sent from my WT19i using xda premium
Wow
Thanx ppl
That was really of much help
Can't thank u much :-D
Il try unlocking my boot loader now n try
N by de way I won't be loosin anything ?
If I unlock my bootloader except for my warranty??
heyamprince said:
Wow
Thanx ppl
That was really of much help
Can't thank u much :-D
Il try unlocking my boot loader now n try
N by de way I won't be loosin anything ?
If I unlock my bootloader except for my warranty??
Click to expand...
Click to collapse
Bootloader unlock voids warranty. Official method also removes DRM keys.
Installing custom ROM removes all your data.
Sent from my WT19i using xda premium
heyamprince said:
Il try unlocking my boot loader now n try
N by de way I won't be loosin anything ?
If I unlock my bootloader except for my warranty??
Click to expand...
Click to collapse
Yes, if you use the official unlock method you'll permanently lose DRM keys (which will stop things such as TrackID working).
The s1tool method retains these keys.
Edit: Ninja'd by Someguy .
notoxa said:
Yes, if you use the official unlock method you'll permanently lose DRM keys (which will stop things such as TrackID working).
The s1tool method retains these keys.
Edit: Ninja'd by Someguy .
Click to expand...
Click to collapse
Only the original TrackID stops working, if you install from Market, it will work.
So far I have had no problems with losing DRM keys.
No-Edit: Aw yeaa!
Can't seem to access my recovery menu -__-*
Tried switchin off holdin de volume down key
Got a blue indicator light
But its not entering de mode :-(
waiting command when embedded
heyamprince said:
Can't seem to access my recovery menu -__-*
Tried switchin off holdin de volume down key
Got a blue indicator light
But its not entering de mode :-(
Click to expand...
Click to collapse
Turn off phone, hold down Volume UP, connect USB Cable, then your phone is in fastboot mode, blue LED lights up. The screen stays turned off, nothing will appear there. You are now able to install kernels via fastboot. To exit this, just disconnect the cable.
The same thing, but with Volume DOWN button and your phone is in flashmode, then you can install stock firmware back via Flashtool or SMUS(Sony Mobile Update Service).
To enter Recovery, turn on your phone in regular way, and when screen turns brighter(on some custom kernels, also LED turns on), click Volume DOWN button many times until the Recovery menu appears.
stuck on text sony erricson nothing else can be done
Hello,
i have sony ericsson xperia x10 mini pro was ver 2.1
wanted to upgrade to gingerbread.
i lost the post of which kernel i upgraded to and how to !!
i used flashtool the latest version which is 0.9.0.0 built on 2012-07-19
i booted from my SE with the blue screen and menus to load the kernel NAa from SD card.
everything went fine after rebooting the device is stuck on faint Sony Ericsson text no animated logo on anything after
the text which starts very bright then faints.
here is what i get when i connect the flashtool
02/020/2012 11:20:36 - INFO - Device connected in flash mode
02/020/2012 11:20:41 - INFO - Device disconnected
02/020/2012 11:20:51 - INFO - Device connected with USB debugging off
02/020/2012 11:20:51 - INFO - For 2011 devices line, be sure you are not in MTP mode
02/020/2012 11:20:55 - INFO - Device connected with USB debugging on
02/020/2012 11:20:56 - INFO - Connected device : U20
02/020/2012 11:20:56 - INFO - Installed version of busybox : BusyBox v1.19.4-cm7 bionic (2012-02-04 22:27 +0100) multi-call binary.
02/020/2012 11:20:56 - INFO - Android version : 2.3.7 / kernel version : 2.6.29
and the blue screen with menu doesn't come i tried removing battery and putting it back and start with back button and volume + or - nothing happens!!
Any solution ???
thanks in advance
Nabil
---------- Post added at 08:00 AM ---------- Previous post was at 07:50 AM ----------
ignore this msg. just put the email notification on
Btw this Forum is for xperia Mini (pro) (sk17i) and Not for x10 Mini pro (u20i?). But:
When you try to enter cwm, what Do you mean with Start and hold volume +/-? You nedd to press it again and again, then you get in cwm. If that doesn't work Flash stock Firmware back.
Sent from my SK17i using xda app-developers app

x10 mini bricked

Hi,
Here is my problem.
I have Xperia x10 mini/ yesterday , but mistake, I installed the firmware of the X10 mini PRO !!!
Now, once I understood the mistake, I want to flash with x10 mini firmware.
In order to flash I need to have FLASHTOOLS and need to press the BACK button - the problem is that since the phone is using now the wrong firmware, the BACK button (needed for the flushing ) doesn’t do anything and thus, I cannot install the correct firmware. I tried pushing all other buttons without any luck.
Any idea how I can overcome this problem ? I can’t use my phone now.
which firmware you are wrong installed. ROM or kernel.
ramimos said:
Hi,
Here is my problem.
I have Xperia x10 mini/ yesterday , but mistake, I installed the firmware of the X10 mini PRO !!!
Now, once I understood the mistake, I want to flash with x10 mini firmware.
In order to flash I need to have FLASHTOOLS and need to press the BACK button - the problem is that since the phone is using now the wrong firmware, the BACK button (needed for the flushing ) doesn’t do anything and thus, I cannot install the correct firmware. I tried pushing all other buttons without any luck.
Any idea how I can overcome this problem ? I can’t use my phone now.
Click to expand...
Click to collapse
In flashtool...... select correct firmware and press flash button..then connect it phone and press and hold power+vol down+menu button until the green light on top flashes...then you firmware will be flashed...
Sent from my HTC One X using xda premium
nothing happens
when i use the POWER+VOL DOWN+MENU buttons....
So
I managed to hold together the HOME+BACK button and then pushed the POWER button and flashed the E10i 2.1.1 A.0.6 firmware!!!!
while doing it, i noticed for a meesage that the phone is not rooted.
upon finishing the flashing, the phone doesnt boot up, i managed to see the green light and thats all.
i also downloaded the S1 tool in order to root the phone but it says that it can not detect the phone....
what should i do now?
update #2
phone doesnt boot up.
when i connect the flashtool i get the message "Device connected in flash mode".
how to continue from that point ?
ramimos said:
phone doesnt boot up.
when i connect the flashtool i get the message "Device connected in flash mode".
how to continue from that point ?
Click to expand...
Click to collapse
Use Sony Ericsson Update Service Repair function! That will work....
ramimos said:
I managed to hold together the HOME+BACK button and then pushed the POWER button and flashed the E10i 2.1.1 A.0.6 firmware!!!!
while doing it, i noticed for a meesage that the phone is not rooted.
upon finishing the flashing, the phone doesnt boot up, i managed to see the green light and thats all.
i also downloaded the S1 tool in order to root the phone but it says that it can not detect the phone....
what should i do now?
Click to expand...
Click to collapse
There is no need for rooting to flash firmware using flashtool....make sure u r flashing correct firmware
Sent from my HTC One X using xda premium

[Q] Flashed a ROM , Can't Enter Recovery , Can Do Nothing

Hey Guys .
I'm Not a Noob In Android But This Low - End Devices Just Are So Confusing.
I've Got a Xperia Mini Pro ( With Keyboard ) . and I Rooted It and Installed X - Parts http://forum.xda-developers.com/showthread.php?t=1437840
and Flashed This ROM http://forum.xda-developers.com/showthread.php?t=1739569&page=2 .
After Flashing , Now I Can't Enter Recovery ( I Press The Buttons at The Sony Ericsson Logo , No Luck )
The Screen Goes Blank After The Logo and I Can't Do Anything.
Do You Suggest Anything?
( Boot Loader Locked , I Selected The Lock Option In AROMA )
Thanks In advance.
Can you get into recovery mode?
1)Take out the battery of your phone, wait for a few minutes, put it back again.
2) Then hold down the volume key, and plug in the usb cable (connected to your computer)
Does the LED light flash green? If it does, you can flash the official firmware back into your phone and get it working again.
if you have bootloader locked, that would mean that recovery would also be removed, you should have installed the postInstallCWM which can be found here in the forums. i suggest that you reflash stockROM and root then install CWM again. you should have read the forums about custom roms and locked bootloaders
Try this for recovery: http://forum.xda-developers.com/showthread.php?t=1774119
and this for flashing ROM on locked bootloader: http://forum.xda-developers.com/showthread.php?t=1832255
Use the power button not the volume down
Aidin+ said:
Hey Guys .
I'm Not a Noob In Android But This Low - End Devices Just Are So Confusing.
I've Got a Xperia Mini Pro ( With Keyboard ) . and I Rooted It and Installed X - Parts http://forum.xda-developers.com/showthread.php?t=1437840
and Flashed This ROM http://forum.xda-developers.com/showthread.php?t=1739569&page=2 .
After Flashing , Now I Can't Enter Recovery ( I Press The Buttons at The Sony Ericsson Logo , No Luck )
The Screen Goes Blank After The Logo and I Can't Do Anything.
Do You Suggest Anything?
( Boot Loader Locked , I Selected The Lock Option In AROMA )
Thanks In advance.
Click to expand...
Click to collapse
That;s it. I have the same problem before but I tried all the buttons and the power button worked for me
Reflash back to stock using Pc Companion, SEUS or flashtool.
Press thanks if you think I helped you
Sent from my Xperia Mini Pro using xda app-developers app
firda4415 said:
Reflash back to stock using Pc Companion, SEUS or flashtool.
Press thanks if you think I helped you
Sent from my Xperia Mini Pro using xda app-developers app
Click to expand...
Click to collapse
this.......
do this if anything broken.
flash back to stock ROM ftf, install CMW (locked bootloader), wipe all except /system, install ur ROM.
Sent from my SK17i

[Q] No flash mode O.o

Hi guys!
I can not run flash mode in a neo (note here, this is not my phone, I only trying to repair it somehow).
When I turn it on, only sony logo appears, than xperia logo aaaand it reboots. When I'm trying to start flashmode, (holding "back" than connecting to pc) it is just turning on, sony logo, charging (also when I'm trying to start fastboot mode). What can I do with it?
(plus info: the owner of this phone was try to upgrade his rom to android 4.1.2, and I don't know... maybe he did not unlock the bootloader or didn't flash the kernel or what...)
Try restoring the phone with sony companion
Xenolk said:
Hi guys!
I can not run flash mode in a neo (note here, this is not my phone, I only trying to repair it somehow).
When I turn it on, only sony logo appears, than xperia logo aaaand it reboots. When I'm trying to start flashmode, (holding "back" than connecting to pc) it is just turning on, sony logo, charging (also when I'm trying to start fastboot mode). What can I do with it?
(plus info: the owner of this phone was try to upgrade his rom to android 4.1.2, and I don't know... maybe he did not unlock the bootloader or didn't flash the kernel or what...)
Click to expand...
Click to collapse
To enter flash mode, you need to hold the "Menu" key and not the "back" key while attaching it to the PC. Make sure you do this when the device is turned OFF!
Sent from my Xperia Neo V using XDA Premium 4 mobile app
ChameleonGeek said:
Try restoring the phone with sony companion
Click to expand...
Click to collapse
nope, no flahsmode just like I told you. Without it, sony pc companion unable to restore the phone.
karanrajkapur said:
To enter flash mode, you need to hold the "Menu" key and not the "back" key while attaching it to the PC. Make sure you do this when the device is turned OFF!
Sent from my Xperia Neo V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Man, I tried. I also tried entering fastboot mode and all of existing and imaginary way to start that phone somehow but nothing happens. Sony logo, charging. I should think the keys are dead or what?
Xenolk said:
Man, I tried. I also tried entering fastboot mode and all of existing and imaginary way to start that phone somehow but nothing happens. Sony logo, charging. I should think the keys are dead or what?
Click to expand...
Click to collapse
Probably. You might just want to consider showing it to spoke hardware guy.
Sent from my Xperia Neo V using XDA Premium 4 mobile app

My xperia sola is dead... :(

Hello,
after reading the topic of aid, and not getting even with soft / hard brick, my soles not pass the boot and there is eternally ...
he flash in fastboot ,flash in fastmode says this all ok, and then on reboot not exit logo, to help, i guess I am no cwm ... can someone help?
I have BLunlocker and root. what i do?
sorry my bad english
Keep pressed volume up+power button until you'll feel 3 vibrations. Ypur phone if off now. Try to flash stock ics fimware using flashtool.
Sent from my MT27i using Tapatalk
Doz it freezes.??
Sent from my Xperia P using XDA Premium 4 mobile app

Categories

Resources