Anyone have any experience with using the dock with tf with screen protector. not so much for protection but for the texture of it. the TFs screen is really sticky specially when clean, and i really like the texture of phantom skinz on my phone.
i'm just wondering how the added thinkness would prevent the tf from docking correctly? also if the skin gets stressed out due to the constant contact with the dock.
Sent from my Transformer TF101 using Tapatalk
no problem here at all with my I pad cut out modified EXIM screen protector and dock.
Skinomi carbon fiber and screen protector fit just fine with the dock.
Sent from my TF101
Hi all, any suggestions for a slim case that doesn't cover the entire bezel? Also magnet free. I have one from eBay and have 2 problems. One, the magnets cause GPS and compass interference. Two, it covers the entire bezel all the way around and a lot of times even covers the menu buttons on bottom of the screen. All suggestions would be much appreciated.
Sent from my Transformer TF101 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=1191079
Check that one out
Sent from my Transformer TF101 using Tapatalk
search amazon for:
Acase (TM) Asus Eee Pad Transformer TF101 Leather Case Folio with multi view Stand for Asus Eee Pad Transformer
that one doesn't cover bezel either
I'm updating the original post because I have now received and applied this screen protector. You can see the photos and my comments here:
https://plus.google.com/photos/105537586944716449433/albums/5696831693307582225
Overall, it's pretty darn good. The fingerprint problem is practically non-existent now and the Prime's screen brightness more than makes up for the slight reduction in sharpness the anti-glare screen causes - even on Auto-Adjust Brightness. I can attest to the fact, that with some care and warm soapy water, the screen are removable and reusable. And they're pretty cheap to buy on Amazon.
Some small complaints:
* The punchouts for the camera and light sensor are completely punched out and more that one person will mess up their install trying to remove them. Even after installation they are a bit unsightly.
* The was no cardboard applicator despite what the instructions say but I didn't use one anyway. And the included lint free cloth frays at the edges with some use and leaves particles behind. Try a coffee filter instead.
* It's likely you will have one side that doesn't quite adhere to the screen along the edge if you handle it from that edge. This can cause you to inadvertantly unpeel the screen from time to time. But I've had that with every screen protector I've had what isn't part of a cover.
If you have any questions ask away and I will try to help.
denverbuckeye said:
Ordered the three pack of this one:
HHI Asus Transformer Prime TF201 Anti-Fingerprint, Anti-Glare, Matte Finished Screen Protector
Anyone have any experiences with this brand?
Click to expand...
Click to collapse
I dont but one of the biggest gripes i have right now (and mirrored by others) is the insatiable appetite this screen has for finger prints. And the glossiness.
I want a matte finish so i can see it clearly outside and not worry about blinding myself or anyone ....Can anyone who has put on matte screen protectors chime in on how happy they were...if the colors were muted too much (yes, glossy = gorgeous) and if the tacileness changed when sliding fingers?
While I have never personally used a matte screen protector, the general consensus is that they do dull the screen a bit and the texture a bit.
Sent from my Droid using Tapatalk
denverbuckeye said:
Ordered the three pack of this one:
HHI Asus Transformer Prime TF201 Anti-Fingerprint, Anti-Glare, Matte Finished Screen Protector
Anyone have any experiences with this brand?
Click to expand...
Click to collapse
Thanks added to my:
Ultimate Transformer PRIME TF201 Accessory Guide
http://forum.xda-developers.com/showthread.php?p=20013463#post20013463
Denver: Could you PM me when you get them or post an edit? i HATE how glossy this screen is...while trying to watch/play games while the wife is after christmas shopping is painful even with super IPS+ turned on. matte although not perfect would lessen how often i see my double chin
joepic said:
Thanks added to my:
Ultimate Transformer PRIME TF201 Accessory Guide
http://forum.xda-developers.com/showthread.php?p=20013463#post20013463
Click to expand...
Click to collapse
we get it, you have a
Ultimate Transformer PRIME TF201 Accessory Guide
http://forum.xda-developers.com/show...3#post20013463
My boyfriend bought this same protector for his TF101 (although it was a 1-pack, not a 3-pack) and he's still happy with it. I personally think that the antiglare protectors make the screen look cheap and plasticky and would rather wipe off prints than have my screen look less clear, so I buy the crystal-clear ones (I have an order from the same company on Amazon for the crystal 3-pack).
Like a lot of you, though, he wanted to reduce glare and prints so it has worked well for him. He had a very problematic application but in a three-pack you get more tries, and all of the bubbles except for one or two settled out over time. The included stylus is a piece of junk.
biggem001 said:
we get it, you have a
Ultimate Transformer PRIME TF201 Accessory Guide
http://forum.xda-developers.com/show...3#post20013463
Click to expand...
Click to collapse
Thanks for this, this has been popping up all over the place. While I appreciate the time and effort that went into this guide, half the stuff needs to be removed as its for the original transformer and could easily confuse someone.
for people who have it, how is the texture? my biggest gripe with screen protectors (next to the fact that i can never get them on clean with no bubbles) is that they have a more sticky texture compared to bare glass.
the coating on the prime's screen makes fingerprint cleaning super easy though for what it's worth.
adiliyo said:
for people who have it, how is the texture? my biggest gripe with screen protectors (next to the fact that i can never get them on clean with no bubbles) is that they have a more sticky texture compared to bare glass.
the coating on the prime's screen makes fingerprint cleaning super easy though for what it's worth.
Click to expand...
Click to collapse
To me, the TF101 one (the matte one) feels like the LCD screen of my laptop, the several-generations-ago Macbook Pro. Non-glossy, a little plasticky but not grippy/a problem for swiping a finger.
watsaname said:
While I have never personally used a matte screen protector, the general consensus is that they do dull the screen a bit and the texture a bit.
Sent from my Droid using Tapatalk
Click to expand...
Click to collapse
While that is true, I'll gladly trade some brightness for the matte smooth non-sticky texture and anti-glare.
codyco83 said:
While I appreciate the time and effort that went into this guide, half the stuff needs to be removed as its for the original transformer and could easily confuse someone.
Click to expand...
Click to collapse
I guess you didn't read the first couple of lines of the guide...
DISCLAIMER: Some of the items listed below (case, screen protector, etc.) are for the Eee Pad Transformer TF101. They are here to give you an idea for something you may not have know about. The manufactures have NOT made a PRIME TF201 version yet. I will update the list with TF201 product when it becomes available.
joepic said:
I guess you didn't read the first couple of lines of the guide...
DISCLAIMER: Some of the items listed below (case, screen protector, etc.) are for the Eee Pad Transformer TF101. They are here to give you an idea for something you may not have know about. The manufactures have NOT made a PRIME TF201 version yet. I will update the list with TF201 product when it becomes available.
Click to expand...
Click to collapse
That doesn't mean it isn't still misleading.... because it is.
Did anyone actually receive this screen protector yet?? Hows the fit?
Wannagotopopeyes said:
That doesn't mean it isn't still misleading.... because it is.
Did anyone actually receive this screen protector yet?? Hows the fit?
Click to expand...
Click to collapse
Doesn't release til the 6th. I ordered one too, I'll update as to how well also. P.S. Skinomi's dry install screen protector is effin garbage...
I've used both on other devices. The matte skin does dull things up a bit, but if you want anti-glare that is the only solution you have. It also helps with finger prints a little. The clear, is just a screen protector which you will still get the glare and some finger prints. It just boils down to preference. I happen to HATE glare, so I usually stick with the matte. I'll just increase brightness by one notch and I'll be fine.
This screen protector seems to be in stock now on Amazon, anyone receive theirs yet??
I'm still hesitant to order one but I want to get rid of these damn fingerprints
biggem001 said:
we get it, you have a
Ultimate Transformer PRIME TF201 Accessory Guide
http://forum.xda-developers.com/show...3#post20013463
Click to expand...
Click to collapse
Wait did I miss something, you mean we have an
Ultimate Transformer PRIME TF201 Accessory Guide
http://forum.xda-developers.com/show...3#post20013463[/QUOTE]
**** I had no idea! One common place to get ALL my Tf201 accessories? Thanks!!!!!!!!!!
joepic said:
I guess you didn't read the first couple of lines of the guide...
DISCLAIMER: Some of the items listed below (case, screen protector, etc.) are for the Eee Pad Transformer TF101. They are here to give you an idea for something you may not have know about. The manufactures have NOT made a PRIME TF201 version yet. I will update the list with TF201 product when it becomes available.
Click to expand...
Click to collapse
In Codyco's defense... You do get really annoying with that. If you're going to be that repetitive about it, make sure it's a damnedly good formatted post, and right now it's not.
As for the OP. I had a Steinheill (SGP) antiglare/matte screen protector on my Samsung GT10.1 and I LOVED it.
I read my text books on my tablet so I am reading on it more than I am consuming video, and I could absolutely not stand at the glare on the screen. The screen protector even let me read the tablet outside without staring at the trees and their leaves behind me.
That being said, there was a slight degradation in screen quality but the antiglare tradeoff made it *much* more than worth it. Plus it makes swiping across the screen buttery smooth. However, that was a top quality screen protector. Ymmv with a cheaper brand.
I utterly cannot get the people who lambast them, as they have to deal with ridiculous amounts of reflections.
I almost ordered the skinomi tech skin screen protector for the prime but didn't because it says not compatible with keyboard dock, presumably because it will tear or whatever when putting it in the dock. Has anyone found one that does work with dock similar to the techskin. I have noticed a small line on the tablet from where the dock keyboard pushes on the screen.
I didn't find it on amazon, but I found that they have some at the skinomi site. Please delete thread.
Sent from my Transformer Prime TF201 using Tapatalk
ghost armor
Ghost armor does not work either...big line when put on
What is the best Anti-Glare screen protector for the TF300 and the easiest to put on?
I have an anti glare screen protector, but i dont recoment it. You lose quite a bit of sharpness and you can see the mated surface all the time. The other thing is that i bought it off ebay from china.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app