i need your help!
I recently install jblend, and copy all three (.so) files to system/libs, (.jar) to system/frameworks and and two (.apk) to app folder.
when i shut down my phone and turn it on. My phone keeps restarting. So i remove the sdcard while the phone keeps restarting.
now it gives me a message process.media has stopped unexpectedly.
i cant open my photos,mp3, and video, i cant play youtube, i cant browse.
so i decided to update it via seus, i did holding the back key while connecting the phone. But seus doesnt detect my phone. Theres only a green light. And also when the phone is turned on and i connect to pc, it keeps restarting.
Can sony fix my problem?
thanks
hey. noneed to flash the stock rom nd then root and all buddy. remove the battery and restart it. enter into recovery or cmw. just install the custom rom again. u can mount your sd card and unmount it from cmw. this happened couple of times with me. not a big deal!
thanks siddardha21
1.how can i remove the battery of x10 mini?
2.hox can i enter into recovery or cmw?
3.where can i get custom rom for x10 mini android 1.6?
And do force method working? I mean holding middle+back and power button? Do seus will detect my phone now after i do it?
thanks siddardha21.
welcome.
i'm afraid to say tht mini battery cover can be removed but battery is not user replaceble. tht means u must take it so se store to change your battery.
2. did u install cmw or recovery before? i guess u never rooted your phone?? its ok.
if u have'nt rooted. u ust flash with stock seus rom. yes. seus will recognse your phone. u can get custom rom frm mini android development section. mini has best roms out there. check them out.
hi! Thanks again.
i did not install custom rom,
but i rooted it with universal androot. (is that ok)?
And i will try to follow what you said about flashing.
can you post the complete procedure about flashing?
thanks
yep!! sure. download sony ericsson update service and all the drivers it asks. thn install it.
open the seus and click update phone and follow the instructions it shows on the screen. or turn of the phone hold power button and back button and connect it to usb. it will update itself. hit thanks if i helped you!
thanks. I will try it! Hope it works! Thank you siddardha21!
Related
I am sorry to disturb you but I have a big problem with my x10.
I explain: I was on xRecovery and inconveniently clicked on " system format" I had not realized it at the beginning, so then I clicked on "reboot" then my x10 does not work, it stays on the "Sony Ericsson" screen at boot.. and I can't have any access to xRecovery with the back button.
I do not know what I can do for fix my error...
Please help me
ps: I use the last froyo beta 2 of zdzihu
Reflash with seus.
THANK YOU SO MUCH!!!!!!!
You save my phone =)
I have a same problem.
I turn out battery and wait one min,than turn back (phone is off yet)
Then put cable in PC
than press the back button and turn the usb to phone.
Keep pressed back button and sonyericcson logo is appeir. (lamp is green)
If I go to keep the back button when SE logo show, than show battery icon to charge on the screen (lamp is orange)
If I stop to hold the back button when SE logo show, then moving into classical ignition and stop asking me the network key sim ...
I done know what is a network sim...
I note that my phone worked just fine on version 1.6 and am no network key is not looking ... All this happened when it decreased the Nordic flash 2.1 ..
When I try the SEUS to do a restore says it is not possible to throw an error ...
The mods x10i
Firmware - 2.1 update1
Baseband - 2.0.46
Kernerl 2.6.29 SEMCUser @ SEMCHost # 1
Build 2.0.A.0.504
Can I go back to version 1.6 or put some other firmware, if we will be doing.
Now I use phone only on mp3
heeeeeeeeeeeeeeeeeeeeeelp
XperiaX10iUser said:
Reflash with seus.
Click to expand...
Click to collapse
itdoesn't work for me plz help
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
I had the same problem with xRecovery.
before I put the beta 2, I have made a backup with xRecovery to save my 2.1 [Eminence v1.2]
then I stucked with SE white logo, I pulled the battery out, rebooted and went back to xRecovery..
so If you didn't made any backup, use Flash Tool or reflash.. same thing, same result
Alejandrissimo said:
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
Click to expand...
Click to collapse
That doesse nt work for me. The phone cannot go in to the flash mode...
I'm dead, techyyy, plz help?
Downloaded flash tool and cannot work, just the logo there and i can't do anything, not mount it into flash mode....BOOT LOOP!!!
Stuff xRecovery, Crap my phone! Not gonna use it again!
Help!!
SEUS
Just download the Sony Ericsson Update Service - SEUS - Run it - follow the prompts - force a system restore - it will work.
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice/xperiax10?cc=gb&lc=en
Hold the back key while putting in the battery, cable already connected and SEUS running - your looking at the bootloader saying - no firmware - so load one onto it and your good!
Thanks man, its all working
Thanks
Aussies are awesome
finally fixed
btw im melbourian too
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
You can use Update Service to fix it
you need to flash your phone,i had the same problem and was worried my phone was dead,it should work,let me know if you have trouble
ice_pick88 said:
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
Click to expand...
Click to collapse
The X10 is impossible to brick, that is about the only good thing with the locked bootloader that SE uses.
You should be able to resolve your problem by starting PC companion agian, and follow the instructions as you did the first time (when you pulled the cable). When inserting the USB while holding the back-key down the phone enters flash mode, this flash mode does not get overwritten when flashing the android OS, so even if the OS is corrupted the flashmode still works, and can be used to rewrite a fresh copy of android to your phone.
Its an easy fix,flash the phone on flash tool
Sent from my X10i using XDA App
Use flash tool on PC not xrecovery
Sent from my X10i using XDA App
Excuse me for my bad english.
I've rooted my x8, after I want to install apps2sd, and it don't read adb command, now also the sim card it doesen't know and it doesen't connect with wifi.
What can I do?
Thank you
http://forum.xda-developers.com/showthread.php?t=1011071
if u cant do the tutorial above... just bring to service center.. they will fix it for u...
Thank's of all!!!
I've resolved. I reinstalling the software with "Update service" and my phone is as new!!
hi,
im new to this forum. i bricked my x8 2 days ago.. i was trying to install floyo 0.1 ROM. i was trying to format dalvik cache( is that what its called?) but accidentally i formatted my system. i have managed to back up my system via xrecovery before the brick. is there a way i can put it back in there?... i cant boot in xrecovery since probably its gone after i formatted my system(guess since nothing happens when i press back key multiple times).. any help will be appreciated... i tried SEUC, nothing happens after i plug in my phone holding back key, pc companion keeps crashing after preparing computer (v2.10.053).......
diabolicalprophecy said:
hi,
im new to this forum. i bricked my x8 2 days ago.. i was trying to install floyo 0.1 ROM. i was trying to format dalvik cache( is that what its called?) but accidentally i formatted my system. i have managed to back up my system via xrecovery before the brick. is there a way i can put it back in there?... i cant boot in xrecovery since probably its gone after i formatted my system(guess since nothing happens when i press back key multiple times).. any help will be appreciated... i tried SEUC, nothing happens after i plug in my phone holding back key, pc companion keeps crashing after preparing computer (v2.10.053).......
Click to expand...
Click to collapse
download and install stock OS by flashtool and then root it and install recovery using flashtool
after that you can restore or install wtever you want.
press thanks if helped
Plz help me out. I installed xperia mini rom in my x10 mini (by mistake) and now it is not going beyond Sony Ericsson logo.
I can't afford to loose my phone so please help me.
You're going to need to use the Sony Ericsson Update Service (SEUS) , downloadable from the Sony Ericsson website.
Thankx bt I have already tried that. The problem I encounter is that the software doesn't recognize my phone;-(
sent from my nexus s4.0.1)
have you tried using a flash tool and flashing the firmware?
Sent from my R800i using xda premium
Did you try to hold the back button while connecting your phone to SEUS?
Hi, I need help too with my bircked phone. I can not flash firmware, also did not work for me SEUS nor PC companion.
From flashtool I got this message (atteched pic).
You need to unlock your bootloader to flash new kernels. It says so in the instructions. You can tell yours is locked by having a look at VER= right before the error. When you unlock your bootloader, that R turns into r. You won't be able to flash any kernel without unlocking it first, which will void your warranty.
How to unlock the bootloader:
http://forum.xda-developers.com/showthread.php?t=1254225
The info is all around, there's little reason to be banging against these issues...
With S1tool I cant get to flash mode, the led is red blinking. No green led.
Also before I bricked phone flashing nAa kernel I unlocked the bootloader.. But looks NOT
I already had similar problem and discovered that my issue was caused by build.prop file. When I installed a rom from other device the phone was not starting because build.prop was not correct.
I supose you had usb-debuging active so while stuck at the logo try to use a program like "ADB mask controller" to check your build.prop. If you see minmi there then it's incorrect, for X10 mini it should be robyn. Replace the file
I just want to go back to stock rom. But SEUS nor PC companion not workin for me, coz I cant get to flash mode. I cant turn on my phone, I not see SE logo too.
Flash Mode normally works, you press the back button and insert the cable without letting go of the button. But to this when the applications requests it because the phone doesn't stay in flash mode unless there is activity.
After long pressed back button (>5 min.) I get to flashmode with SEUS, but then.. failed (pic below).
From PC Companion I get error too.
The main quastion - is it possible to unbrick my phone??? I almost gave up
arpu26 said:
After long pressed back button (>5 min.) I get to flashmode with SEUS, but then.. failed (pic below).
Click to expand...
Click to collapse
The SEUS should work mate.. Was ur phone charged while doin this?? N can u get into recovery by hittin the back button when sony ericsson logo cums??
faiyyaz said:
The SEUS should work mate.. Was ur phone charged while doin this?? N can u get into recovery by hittin the back button when sony ericsson logo cums??
Click to expand...
Click to collapse
I dont know if phone is charged, coz I cant turn it on. But I have left it to charging for all night.
Also I dont have recovery. I cant turn on my phone so I cant see any logo.
arpu26 said:
I dont know if phone is charged, coz I cant turn it on. But I have left it to charging for all night.
Also I dont have recovery. I cant turn on my phone so I cant see any logo.
Click to expand...
Click to collapse
Read ur first post .. it says cannot go beyond sony ericsson logo.. N now it is that it dosnt turn on..basically the battery mite be down..charge it again n giv it a try (considering the chargin port is fine) n by that time Il post u a link if I find regardin gettin into recovery if bricked.. Had read it somewer..wil hunt n try solvin ur prob by as soon as possible as I am on xda app on phone for now..
arpu26 said:
From PC Companion I get error too.
The main quastion - is it possible to unbrick my phone??? I almost gave up
Click to expand...
Click to collapse
if I can only hold your phone and unbrick it.
Hei guys, any more suggestion how to unbrick my phone?
Can u connect through an ADB like interface.
Sent from my PC36100 using XDA App
Not tried. How to do dat?
Hi would appreciate some help as i seem to of exhausted all avenues...
Was loading a new rom with xrecovery and twice it would'nt load so without any thought took out cable when it rebooted was left with just SONY ERRICSSON in white screen.
It appears no rom is on at all now and will not recognise on superoneclick, flashtool or seus!!
I've tried many times but to no avail HELP!!!
lounger64 said:
Hi would appreciate some help as i seem to of exhausted all avenues...
Was loading a new rom with xrecovery and twice it would'nt load so without any thought took out cable when it rebooted was left with just SONY ERRICSSON in white screen.
It appears no rom is on at all now and will not recognise on superoneclick, flashtool or seus!!
I've tried many times but to no avail HELP!!!
Click to expand...
Click to collapse
Can you still access xrecovery at all?
If not, what can you when you try to flash something via flashtool?
Did you try PC Companion instead?
Flash the stock SE firmware (I would recommend the 2.3.3 one to save yourself trouble) from Flashtool. If that doesn't work, you're pretty much screwed.
DL firmware from here : http://forum.xda-developers.com/showthread.php?t=920746
Best option is given by Panzerfaust101
Another option is as follows:
Remove the battery.
Connect your phone to system with the battery still out.
Now hold the back button and put the battery on, green led will glow.
Now you are on flash mode and this would stay for not more than 10 secs, install the latest firmware and then try accessing Xrecovery.
Its should do the trick!!
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Please give some info.
Have you unlocked bootloader?
What rom are you trying to flash?
When you start to flash, flashtool asks for disconnect the phone, power off and connect again with BACK button pressed. Then the process continues...
After flashing kernel you must enter to recovery and install zip file from sd-card.
Regards.
I was tryng to flash rom 3.0.1.G.0.75 on Gingerbread 2.3.3 and ya I was supposed to enter downloading mode but before I do dat phone has stuckd on... gets on wid sony ericsson logo evn if I dnt swtch on...help me..
Please, can you provide the followed procedure ?
Maybe this thread can help you http://forum.xda-developers.com/showthread.php?t=1226826&highlight=lock+bootloader+again
Which log do you use, PC Companion, SEUS, Flashtool...?
Do you have a CWM recovery ?
If you don't know how (or are afraid) to use flashtool...
You can do that :
1/ Launch SEUS (Sony Ericsson Update Service) HERE
or PC Compagnion HERE
2/ Turn off your phone, remove the battery over 5 seconds, replace it.
3/ Hold the right button (the one with the arrow) and plug your phone on your computer with usb (It calls flashmode)
4/ The green led must be light on and SEUS or PCC recognize your phone...
5/ Now you just have to follow the instructions to install a stock rom.
If it doesn't help, you can use flashtool... A great tuto HERE Thanx to Crowds
With it you can unlocked the bootloader and install a new kernel with CWM recovery inside...
Install a new rom, root your phone... ans so more stuffs...
I hope it helps...
I've been told to install x recovery on the computer,take out battery n unplug the phone .Then have flash base band on computer(it will then show that its trying to download)connect phone in flash mode.to do this hold down the bottom right hand button(the back arrow)on your phone then put battery back in(KEEP HOLDING back arrow button)and plug the cable back into your phone.I hope this helps.GOOD LUCK BUDDY!
I am having the same problem with my Xperia Neo, i tried to connect my phone to PC Companion and it says. "PC Companion was unable to connect to your phone, please disconnect and connect again"
My phone is just sitting there with the words "Sony Ericsson" flashing on and off, I fear that my phone is bricked but im not 100% sure, if there is anything that can be done please help!!!
Can you explain more what you're doing ?
Do you did that :
Launch Pc Compagnion
Plug the phone
Mount the sd card
EDIT : Sorry i read too fast your post... Your phone can't turn on you're stuck on the bootlogo of SONY ERICSSON...
Do you plug the phone in flashmode ?
nicks2587 said:
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Click to expand...
Click to collapse
Some of the custom roms are flashed with xrecovery or cwm,
Now what kind of rom did you want to flash?
Maybe you went wrong that in procedures said "flash the rom".
Put out the battery then put in and turn your device on then restore your previous rom then try again and install(flash) new rom.
Good luck.
Sent from my X10 using XDA