Hey guys. I've had my EVO for a while and I've been flashing roms like a fiend, recently I've been stuck on 1x for a few days now. I switched to a stock based ROM and updated all my stuff. Called sprint and they reset my connection and its still on 1x. They want me to go into a store because they think its the phone. Any last minute ideas? Should I s-on or anything. Im also worried about them switching out the phones and me being able to root the new one.
Sent from my PG86100 using Tapatalk
in dialer dial ##DATA# click edit mode enter you msl click data profile then hit the settings(?) button on the bottom of phone click restore reboot phone let it do its thing see if that helps
And if you do end up bringing it in, normally a fresh flash of a completly stock ROM will work, as long as you don't have a custom splash screen they shouldn't notice s-off.
They would try to do an update which will include 1.5 bootloader.( I've seen someone who did this and ended up with 1.5 boot, with s-off as a result, but who knows what was done to it in the store)
Go with the instructions above my post, worth a shot..
Shot from my sharp shooter in 3d
cleanrom2.9.5
Tried restoring, no luck still on 1x. I don't want to be stuck on hboot 1.5 don't they not have s off yet?
Sent from my PG86100 using Tapatalk
have you called to see if a tower is down in your area or something
Bowdowntozoltan said:
Called sprint and they reset my connection and its still on 1x. They want me to go into a store because they think its the phone.
Click to expand...
Click to collapse
twiztidninja said:
have you called to see if a tower is down in your area or something
Click to expand...
Click to collapse
Pretty sure they would have checked that.
what prl are u useing?
I'm not sure. This nocturnal Rom won't tell me. It updated the prl when I restored though.
Sent from my PG86100 using Tapatalk
Had the same proplem i turned my gps off then profile update then prl then ##data# data restore after it reboots let it do the hands free activation then stop it when it does the prl update
Sent from my PG86100 using xda premium
Awesome that fixed it! Thanks!
Sent from my PG86100 using Tapatalk
Your welcome
Sent from my PG86100 using xda premium
Related
is it a verizon prl or is it ok. I know that 11111 is a verizon. been running 11115 for a couple of days with good results but I dont want sprint to cancel me..
11115 is fine. It is a Sprint prl. Mostly given out to only some business accounts. But you won't have to worry about them saying anything. For more info, look at XsMagical's thread here.
http://team-nocturnal.com/showthread.php?41-Collection-of-PRL-s
Thank you
Sent from my PG86100 using XDA App
shawnten said:
Thank you
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
No problem.
Sent from the CMheaven powered 3d
Hello,
I was reading about PRL here and on Magical post and I now have a question, which PRL do you think works best for a daily use?
Thank you!
11115 has been great for me for daily use.
Yeah 11115 rocks in combination with roam control
Sent from my PG86100 using Tapatalk
I have been using 11115 for about 2 weeks and it is the best one I have used since my OG evo had the business PRL on it. I love being able to roam in 3G
How do I change it?
Sent from my PG86100 using xda premium
??
Sent from my PG86100 using xda premium
Okay so when I downloaded the prl .zip and placed it and extract it unto the SD card. Then dialed ##775# then msl then update prl then selected the prl I downloaded. Then pressed menu and commit then it was successful then it said wait 10 seconds. Do I reboot my phone? Cause I've tried waiting and rebooting and its doesn't seem to give me better reception. Any suggestions? Thanks.
Sent from my PG86100 using xda premium
Quick question - If I flash this then use boot manager to run something else, will it keep the PRL that I flashed?
moosh3 said:
Quick question - If I flash this then use boot manager to run something else, will it keep the PRL that I flashed?
Click to expand...
Click to collapse
yup, prl will stick
If I go to system updates and update my prl will it revert back to the one I had before i flash the zip prl listed?
Sent from my PG86100 using xda premium
aFoodStampBaby said:
If I go to system updates and update my prl will it revert back to the one I had before i flash the zip prl listed?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Yes. It will go to the one which Sprint has designated for your area. If you wanted to go back, you would have to do the process all over again.
First of all I am unrooted. I downloaded the zip file for 11115 but when I type ##775# I don't get the password field to show up it just clears the dialer. Any ideas?
boom!! from my shooter
DJ1994 said:
First of all I am unrooted. I downloaded the zip file for 11115 but when I type ##775# I don't get the password field to show up it just clears the dialer. Any ideas?
boom!! from my shooter
Click to expand...
Click to collapse
Here you go should be good after installing this apk.
strange thing........
I changed my prl to this and it works great at my house ( I live in Virginia) but the family and I went out to eat and my reception was terrible. We only went about 10 miles away and with the old prl I got decent 3g signal but with this prl my 3g went to 1X and when I got back home it was again moving faster than ever again.
Okay I installed that and I renamed the 11115.zip to 11115.prl and used ##775# to update. Commit changes it said successful so I rebooted and I'm still on 22081 not 11115. I tried twice. What did I forget to do?
boom!! from my shooter
DJ1994 said:
Okay I installed that and I renamed the 11115.zip to 11115.prl and used ##775# to update. Commit changes it said successful so I rebooted and I'm still on 22081 not 11115. I tried twice. What did I forget to do?
boom!! from my shooter
Click to expand...
Click to collapse
You don't have to rename it just extract the zip to your SD card.
Sent from my PG86100 using XDA Premium App
Tested this on my own device, was good for some significant speed in data transfer over wimax.
First, you will need your MSL number. Download MSL reader from market.
Once you have it, get your MSL using the app.
Open dialer and enter ##3282#
Select “Edit”
Enter MSL number
Select “Wimax”
Select “Realm”
Edit the info to say “sprintpcs.com”
Hit ok.
Top right of screen, select “menu”
Apply changes.
It will ask you to reboot. Reboot, and once booted, power off device completely and pull battery, sit for 30 seconds, put battery back in, reboot.
Succes
Enjoy
yousefak said:
Worked, and thanks.
So the whole time I was using virgin Mobile 4g?
Can they even use our 4g?
Sent from my Evo 3D using Tapatalk 2.0
Click to expand...
Click to collapse
to clarify, virgin mobile IS sprint. the difference however, is one has greater network priority when it comes to data transfer speed. during peak usage times, vm devices will have a slower connection than people on sprint. this fixes that issue.
Thanks, will give it a shot.
edit: HOLY SMOKES!! Went from 3.5mbps to 10.1mbps in the default speed test! This is utterly fantastic! How the heck does this work??
My goodness, this is nothing short of magic. I'm going to be using this as my hotspot from now on. Just downloaded an entire episode in seconds as a "real world" test. Utterly fantastic. Kudos to you!
cobraboy85 said:
Tested this on my own device, was good for some significant speed in data transfer over wimax.
First, you will need your MSL number. Download MSL reader from market.
Once you have it, get your MSL using the app.
Open dialer and enter ##8232#
Select “Edit”
Enter MSL number
Select “Wimax”
Select “Realm”
Edit the info to say “sprintpcs.com”
Hit ok.
Top right of screen, select “menu”
Apply changes.
It will ask you to reboot. Reboot, and once booted, power off device completely and pull battery, sit for 30 seconds, put battery back in, reboot.
Succes
Enjoy
Click to expand...
Click to collapse
I think you mean to say ##3282# or ##DATA# right?
Edit: I flashed the VM firmware, but mine was already set like this. I even pulled down 12mbps yesterday.
Thanks will try
raptoro07 said:
I think you mean to say ##3282# or ##DATA# right?
Edit: I flashed the VM firmware, but mine was already set like this. I even pulled down 12mbps yesterday.
Click to expand...
Click to collapse
YES!!!! typo!!!!
thank you!!!
Worked, and thanks.
So the whole time I was using virgin Mobile 4g?
Can they even use our 4g?
Sent from my Evo 3D using Tapatalk 2.0
Wow, I went from 4MBPS down to 12MBPS. Amazing!
JK, I already had it set to sprintpcs. =x
freeza said:
Wow, I went from 4MBPS down to 12MBPS. Amazing!
JK, I already had it set to sprintpcs. =x
Click to expand...
Click to collapse
Haha! This was actually pretty funny.
yousefak said:
Worked, and thanks.
So the whole time I was using virgin Mobile 4g?
Can they even use our 4g?
Sent from my Evo 3D using Tapatalk 2.0
Click to expand...
Click to collapse
check OP
My 4g has always been around 9 - 11 Mb/s
Btw no one here is getting 11 MB/S
MB/s - megabytes per second
Mb/s - megabits per second
Sent from my EVO One 3D using the XDA Premium App.
try this only if flashed firmware? I have the rom but didnt update firmware
so will it even matter on rom only?
cant test at home but have 4g at work so wondering if it will help
and then i can try tomorrow if so
metalmenance said:
try this only if flashed firmware? I have the rom but didnt update firmware
so will it even matter on rom only?
cant test at home but have 4g at work so wondering if it will help
and then i can try tomorrow if so
Click to expand...
Click to collapse
if you didn't flash fw... your settings shouldn't have changed. check anyways tho
i only flashed CleanROM but the Realm changed to Virgin.
So, I did this.. Changes were made.. Did the reboot/battery pull for 30 seconds.. Now my 4g hangs at the Obtaining IP address for 4g.. Won't connect.. I did everything exactly the way OP stated..
Sent from my PG86100 using Tapatalk 2
nonpointtruth said:
So, I did this.. Changes were made.. Did the reboot/battery pull for 30 seconds.. Now my 4g hangs at the Obtaining IP address for 4g.. Won't connect.. I did everything exactly the way OP stated..
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
update your profile in settings, then reboot again, but just a normal reboot.
cobraboy85 said:
update your profile in settings, then reboot again, but just a normal reboot.
Click to expand...
Click to collapse
Updated profile.. Rebooted.. Still no go..
Edit: Rebooted, 4g is back
Sent from my PG86100 using Tapatalk 2
nonpointtruth said:
Updated profile.. Rebooted.. Still no go..
Edit: Rebooted, 4g is back
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
atta boy.... took me a couple times to nail it down too. by any chance were you connected to 4g when you made the change??
It can't read my msl.
Sent from my PG86100 using xda premium
Worked for me. Went from 4 to 10 Mb/s.
thanks.
cobraboy85 said:
atta boy.... took me a couple times to nail it down too. by any chance were you connected to 4g when you made the change??
Click to expand...
Click to collapse
I was the first time.. I turned it off after that.. Redid everything, updated profile, rebooted twice and it came back on.
Sent from my PG86100 using Tapatalk 2
Specs-
Hboot 1.4
Rom: Newts one, RC3.
The problem- I keep getting an error 67 code when i try to use my internet. and also my mms wont download. please help
try and update prl then profile has worked for me
Sent from my PG86100 using XDA
Had same issue once before and turned out problem was on the carriers end and I had to call and have them reprovision my line. It was a fast and easy fix. Hope it works for you also.
tammyjustin said:
try and update prl then profile has worked for me
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
on the newts one rom it doesnt do anything when i press it /:
DowntownRDB said:
Had same issue once before and turned out problem was on the carriers end and I had to call and have them reprovision my line. It was a fast and easy fix. Hope it works for you also.
Click to expand...
Click to collapse
they did it twice, no luck
Sorry to dig this up, but it came across my attention. Did you downgrade to 1.4 b4 this happened? If so check ur nv items.
Sent from my PG86100 using Tapatalk 2
Are your APN settings accurate?
Call sprint and ask to have your hsl refreshed.
Sent from my PG86100 using xda premium
ok since last night at 12 my data and my text and call stopped working,,even tried with 3 different roms,, hboot 1.12.2222 radio 1.12.11.0809 iv even flashed back my stock stock backup i did when i first got the phone,updated pri prl ect...i still get this
.when i go into settings under "about" i click on network "signal strength" it reads signal strength 0........mobile network type unknown.......service state ....out of service....i called sprint they say theres no restriction on my phone or account...and when i click on
"software information..firmware baseband ect...it says "pri version" "not ready" amd prl version...not ready.,,but when i installed my stock back up i have pri version 2.28-003 prl 25006 but still have no sevice......also on the notification bar above the service bars there is a x ...help whats the deal??
One time I couldnt receive or make any calls or text. I had to call sprint and they did something on their end. I was rooted and all and they did not detect it nor did they mention it.
Did u try to reactivate?
Sent from my EVO using xda premium
vader860 said:
One time I couldnt receive or make any calls or text. I had to call sprint and they did something on their end. I was rooted and all and they did not detect it nor did they mention it.
Did u try to reactivate?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
yup went thru that with sprint today ,,had to call using my wife's phone,,,they said that i would have to take it in to a sprint tech,,bahahaha!!! i even tried 3 diffrent times just to see if someone else had a trick....
Ruu for phone to restore back to default?
Sent from my EVO using xda premium
vader860 said:
Ruu for phone to restore back to default?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
yup
How about flashing the latest radio and firmware?
Sent from my EVO using xda premium
Did Sprint actually reprovision the phone from their end? I had a similar problem with my OG EVO, and that fixed it...
Sent from my EVO using xda premium
yotie said:
vader860 said:
Ruu for phone to restore back to default?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
yup
Click to expand...
Click to collapse
So you're saying you flashed the latest RUU and you still have an issue? If so, the problem must be hardware, not software. If you haven't done that, I would try that next, and then call Sprint and have them refresh your device. Or you can try to activate through Settings first.
Ok so my data has not been working at all the past few days. I have tried stock ROM, meanrom, and cm10. It would work for a few minutes and then go to nothing. I finally tried switching it to just CDMA and it works... I'm in a 4g lte area so why would that be? Also if I try to update prl, firmware, or profile it just keeps searching for hours. What should I do?
Sent from my EVO using XDA Premium HD app
Do you have the newest radios? They end in .809 or somethin, check your baseband.
Sent from my EVO using xda app-developers app
---------- Post added at 03:35 PM ---------- Previous post was at 03:34 PM ----------
.0809 to be exact.
Sent from my EVO using xda app-developers app
Its 1.12.11.0809. Does that sound right?
Sent from my EVO using XDA Premium HD app
spencer311 said:
Its 1.12.11.0809. Does that sound right?
Sent from my EVO using XDA Premium HD app
Click to expand...
Click to collapse
yes
HTC EVO LTE
Is there anything els that could be causing this?
Sent from my EVO using XDA Premium HD app
spencer311 said:
Is there anything els that could be causing this?
Sent from my EVO using XDA Premium HD app
Click to expand...
Click to collapse
if you're on a sense rom try doing the ##72786# on your phone pad that is going torefresh all your service including data
HTC EVO LTE
Thanks! Flashing stock with goodies right now to try it out. If I flash back to cm10 will that cancel out all the updates though?
Ok I tried it but I don't have the password... Even tried the meid converter and used that password and it still didn't let me.
spencer311 said:
Thanks! Flashing stock with goodies right now to try it out. If I flash back to cm10 will that cancel out all the updates though?
Ok I tried it but I don't have the password... Even tried the meid converter and used that password and it still didn't let me.
Click to expand...
Click to collapse
if you dont know your msl and if you're connected to wifi you can download msl reader from the play store... or you can call sprint and they'll give it to you...
HTC EVO LTE
A couple of days ago, my phone had no 3G service, but it would sometimes pickup 4G but my connection usually didn't last very long.
I was running the updated radio 1.12.11.0809.
I downgraded back to the stock 1.13.651.1 ROM and I had my 3G connection back.
Im sticking with the stock radio.
they are upgrading your tower in your area. that i am 100000% sure of
that happened to me also, and a couple of days later it will be back to normal again, and switching it back to cdma will work.
when they finish upgrading the towers is should be good again.
flex360 said:
they are upgrading your tower in your area. that i am 100000% sure of
that happened to me also, and a couple of days later it will be back to normal again, and switching it back to cdma will work.
when they finish upgrading the towers is should be good again.
Click to expand...
Click to collapse
Well It has been over a week... maybe even 2 weeks. Is that normal?
this is happening to me, I was on the phone with sprint for over an hour....I have done the ##78286# code with my MSL and it resets, but I still boot up to just a x/signal bar....Somehow i think my radios corrupted and will not be able to use this phone....
edit: i was able to get signal, but still having problems now after a full ##786# code