Im just creating this thread because everytime i check progression on our wp7 roms theres people posting there problems everywhere in every thread what have already been solved 1000 times before
If you have any problems flashing, problems in the rom, how to's, anything to do with wp7 on our tg01 please post here, where problems cannot be repeated 1000 times over, and solved easier
Camera and headphones xD
SMS
i can not send & receive sms: T-Mobile Slovakia
i try:
without any prefix
with 00421
with +421
change sms centre number with/without prefix +421
but no message sent, no message received
- htc connection manager - find carrier, set ok and reboot.
- internet access is ok, singal is ok : GPSR,Edge,3G
same sms problem on this roms:
[ROM] v1 Mango Unlocked 7740 Marketplace+XAP Deploy
[24.12.11] [mi7ROM2 wp7 7740 MANGO][MultiLang]CLEAN and full unlocked like HD7
[23.12.11] [mi7ROM1 wp7 7004] [ ENG] full market place access
TG01 Mango 7740 Full Unlocked (Native/Interop/Dev)
+ FIX 3G /RADIO SIGNAL
Mayday Mayday!
I tried to flash my T1G0 with the following steps 'n now it's kinda dead...plz help
- Flashed Win 6.5 0321 ROM with sddl.exe.
- pressed camera + power key to enter bootloader mode(white LED)
- Loaded Win 7 bootloader using TG Downloader (At this step the flash failed at 99% with "Checksum error". However the white LED changed to BLUE)
- Continued with flashing Win 7 ROM using ZETIT downloader. The flash completed successfully and the phone restarted only to give me a steady green LED and no display.
- Because it didn't work out I went back to Win 6.5 bootloader using ZETIT downloader.
- Now with 6.5 bootloader(white LED) I flashed Win 6.5 ROM using TG Downloader. The flash completed successfully but again the phone wouldn't reboot . And then if I press power+camera key it would give me a white LED with a message on the screen which read "MOD 23...something".
I went back and forth from Win 6.5 to Win 7 and drained my battery in the process...I'm still to try the usb charging of my battery...so just want to be aware what steps do I need to perform so I don't waste a second of my charged battery this time
nikola92 said:
Camera and headphones xD
Click to expand...
Click to collapse
- no youtube support
and few minor buggs:
- no lightsensor function
- no hardware proximity sensor available (screen stay on during a call)
- no G-Sensor function
- no Camera function
- no usb headphones function
- no country prefix by SMS possible (+49171xxx) only 0171xx format
Tg01 don't have ptoximity sensors at all youtube would be great tho...
SD Card
My sd card 8gb is broken.
It broke when I installing a xap app and I click on TouchXplorer...
I have a 2gb generic, that don't work on TG01, but it is working.
All cards work on the TG01? SDHC, SD, Class 2, 4, 6..?
Thanks
dgsneto said:
My sd card 8gb is broken.
It broke when I installing a xap app and I click on TouchXplorer...
I have a 2gb generic, that don't work on TG01, but it is working.
All cards work on the TG01? SDHC, SD, Class 2, 4, 6..?
Thanks
Click to expand...
Click to collapse
...broken, strange ....maybe, MS recommand class 4
nikola92 said:
Tg01 don't have ptoximity sensors at all youtube would be great tho...
Click to expand...
Click to collapse
ptoximity sensors, yeah i know that .... is not a bug, but it drain the battery
... but we can be happy, with the existed functions........., for now.
@nikola, please install tuneIn radio and test it on AFl latest rom, on my rom don´t work
ok test in 5 min
no youtube support and no mp4 support in all 7740 roms,and i found some hd2 7740 rom hava same porblem,and somebody say：The reason is because the drive.anybody can make it?
thx!
macadam911 said:
no youtube support and no mp4 support in all 7740 roms,and i found some hd2 7740 rom hava same porblem,and somebody say：The reason is because the drive.anybody can make it?
thx!
Click to expand...
Click to collapse
the drive? or driver?
I already tried to replace whole drivers with various stuff and nothing worked.
if anyone is wondering why there sd card is usless aftar wp7 flash here is the thread explaining everything
http://forum.xda-developers.com/showthread.php?t=840524
it seems the only fix is with a nokia
this is what someone has posted about sd card brick >>>>
"well, I formatted my SD card using my HD2. After loading the WP7 on my HD2, I've gone back to WM6.5 and used the built-in Format SD Card app on WM6.5 and it worked like a charm".
so im guessing if we flash back to wm6.5.x through tg downloader, find and install format SD card app maybe we can save our usless sd cards and bring them back by using our own tg01 rather than finding a nokia
Its just an idea if you would like to try this for me and leave your feedback it would help us out
Yes I used E72 and reformated my 4 Gb SDHC card with no problems. Well Aeroflyluby then you wanna say that we will never see that functions working on WP7?
nikola92 said:
Yes I used E72 and reformated my 4 Gb SDHC card with no problems. Well Aeroflyluby then you wanna say that we will never see that functions working on WP7?
Click to expand...
Click to collapse
....maybe, but we have the hope on our amazing Chinese ROM experts AND it works, to 90% very good ...........
How do you mean to 90% good? Do you mean the have fixed something or they are on good way to fix it and maybe complete wp7 ROM? Cuz 90% for me is complete
nikola92 said:
How do you mean to 90% good? Do you mean the have fixed something or they are on good way to fix it and maybe complete wp7 ROM? Cuz 90% for me is complete
Click to expand...
Click to collapse
60% phone function works
10% SMS function works
10% able to access LiveID services incl. Market Place + the most games + apps works
10% music play and music streeaming works
= 90% functions very good (my opinion)
the rest are 10% to fix driver
We WILL get accelerometer and youtube, the only serious problem is camera, but it can be done, really. I'm writing driver for accelerometer right now.
Sorry, you are limited to 15 thanks per day
... is this new ?
Related
Hi guys,
I decided to upgrade my phone the other night, for no other reason then I like to fiddle and see what I can do with things =). WM5 worked fine, but I wanted to check out what WM6 had to offer.
So I download the official upgrade from the HTC member area ( http://www.dopodasia.com/Dopod_Aus ) and install as directed.
Everything went great, and I am pretty happy with WM6.
But after the upgrade, trying to start the camera brings up a dialog box with the error message "Unable to start camera. Unable to initialize Camera". This occurs if I hit the shortcut or run the .exe from explorer.
I downloaded the camera software but trying to overwrite the installed files using activesync yeilds an "unable to overwrite because files are write-protected" error, and attempting to write-enable the files is disallowed (the file just reverts back to write-protected, frustratingly).
I've searched these forums and others, and I can't find any answers.
Any help will be greatly appreciated.
I had the same problem when I pass from WM5 to WM6 because I try to restore a backup from my old ROM over my new ROM, thing that is impossible that works well due to registry and file incompatibilities.
I don't know if it's your case or not...
VivaErBetis said:
I had the same problem when I pass from WM5 to WM6 because I try to restore a backup from my old ROM over my new ROM, thing that is impossible that works well due to registry and file incompatibilities.
I don't know if it's your case or not...
Click to expand...
Click to collapse
Thanks for the reply =)
Nope, im not restoring any backups or transferring anything else.
I have the same problem - no answer yet My original report:
http://forum.xda-developers.com/showthread.php?p=1393458#post1393458
The key thing is that reflashing to a known-good ROM doesn't fix it. What about in your case?
sim
tigersim303 said:
The key thing is that reflashing to a known-good ROM doesn't fix it. What about in your case?
Click to expand...
Click to collapse
Hrmm.. I haven't tried yet, still looking for some sort of workaround or a software solution.
I'll try another OS tomorrow and let you know how it goes.
I also have this error, but...
...occasionally, it works when I do the following:
- Cold boot the device (no soft reset)
- Start the camera, but the screen will display noise
- Close the camera
- Start it again
- Second time, it will operate as expected
But funny enough, this trick doesn't work all the time...
I have friends and collegues that also upgraded and they don't experience this problem at all...
Same thing here... I bought 4 att 8525 units at ebay. they already came with wm6 3.57 from cingular.
3 units are working with no problems, but the camera stopped working in one of the phones.
I've tried everything (I think) , soft reset, hard reset, rom upgrade/downgrade.
A little of history ... so maybe some guru out there figures out what the f.. is going on:
1) The camera used to work fine.
2) Suddenly it began to fail saving pictures to the SC (sandisk 2gb) . All the phones have the same card.
If you choose to save to main memory, it worked.
3) The same day, the message "unable to initialize camera" started to show everytime I tried to start the camera application (4.0).
4) I tought it may be a failure SC, so I removed the SC, reset the phone but nothing changed.
5) Incredibly.... after then phone been turned off for a while... when I turned it on, the camera worked. Took a few pics... and the same error again!
6) Soft reset, hard reset.... nothing...
7) Updated SPL, radio and Rom (schaps 3.57) and the camera did work again!!!!! (with the SC in) .... after a few hours (no applications or skin applied) the error came back.
8) repeated those steps..... but no luck this time....
9) removed sim, sc and repeat steps.... no luck...
10 ) now, it is not working.... I tried coolcamera... but it does not start... tried camera 4.11... nothing... I went through the registry comparing with the other phones... everything is correct.
11) now I am thinking it is hw problem... but how is it possible that it works from time to time??????
Well... I almost gave up looking for a solution.... any idea would be great!
(what is a cold reset? )
thanks
fabian
Good news!!...
I just downloaded this cab that says it corrects SC bad management.
After installing the cab... turning off/on the phone... the camera works!!
(I don't know for how long it will work... but at least it is alive! )
Good luck and please share your experience with this cab !!
fabian
I can't believe it.... it worked for 2 hours... I did nothing with the phone... when I got the phone to send a sms, I tried again the camera... and it did not work!!!!!
(((
this is really weird!!
Well... this seems more like a "blog" than a forum .
Yesterday night I try removing the battery for 15 minutes. Then I turned on the phone and the camera started working.
I was really pesimist about the time it will keep working well... so I took pictures , recorded video, store them into main memory, into SC .. I really messed up with the camera ... everything worked well... tryed also Coolcamera application and took picture at maximum resolution (1600x1200 I think) .. everything Ok.
The camera is still working today... I did soft reset and it is still working... I'm trying step by step every action... synchronize.. wi-fi... phone... sms.. mms.. etc etc...and the camera still working...
I wonder how long will this work.. and what the hell does taking away the battery ???? Does it clean something in the ram ?
Any answer???
fabain
damn
I was really hopeful of this cab...
installed it and nada...
trying the battery trick (again) with this new cab installed to see maybe well just maybe...
fingers crossed
tehMope
Hey ya all,
Did a ROM upgrade
Schaps Pro New Very excellent to state the least!
Did a re-store (double dump move!)
Used SK Tools to re-store old backup of entire system (that was the double dumb move not the using the the fantastic SK Tools app!
Camera worked as well as a 2pixel can, but now get "Unable to start Camera not enough storage is available blah blah
So I did a search found a cab to a Kaiser link to rabidshare and tried to download 6 in a couple of days NO go on that,
http://rapidshare.com/files/97924716/Nadavi_HTC_Camera_5_0_4_2915_00_NEW_HTC_FIX.cab
Rabidshare doesn't finish download most every time I try on PC or phone!
Can anyone provide another link to download form please please!
So I tried another cab on this forum ArtemisSDeng and no go with soft rest.
Took battery and micro card out, 15 minutes (what-ever) no go on that either. . .
Have
Storage FREE 32.96 MB
Programs free 27.81 MB
So NOW what can I do besides buy a new Tynt and not restore old system restore over a NEW ROM?
Much help please?
where are updated cameras anyway?
I am currently running version 3.0 build 25498 HTC Camera on my Wizard with WM6 (NBD v9.2) ROM. Where can I find updated camera files. I tried a ROM once that had version 3.3 on it and it seemed to work better but I haven't found any standalone copies of the camera programs.
Anyone?
Can I use this cab for my HTC TYTN II (Kaiser) or its ony for Artemis ?
Hope this helps,
The reason that my camera messed up after installing a new ROM, is that I re-stored my device with a whole system restore!
This covered over the new upgraded settings found in the NEW ROM with old settings/ configuration !
SO I reinstalled the OLD ATT ROM (yuk) and BINGO camera works as it did before the undated ROM!
Now I going to reinstall the NEW cooked ROM, without the restore system and just hand install all my 6 apps, so I don't mess up the updated camera settings!
Maybe next week hopefully!
Hope that helps someone, so they can run a cooked ROM without messing up their camera!
Later!
madefree, you can restore all the old setup of your phone with SPB Backup ver2. It has an upgrade rom mode that doesn't alter the os at all but puts things back as they were on your old os. Today screen how you like it, any apps you've installed(fully regged). The only thing I've found was that for some roms I had to re-install the .net framework 3.5 as it DOESN'T alter the OS files. Well worth the money..
Cheers...
Thanks much ultramag69 for that info on the v2, as I was doing a flash on LVSW Edition ROM in about 20 minutes, so maybe dnload SPB Backup v2 and give it a try!
I just wish Sktools did that same type install, since I already bought that app!
Again thanks!
fix camera not initailize error (maybe)
ok not sure this will help every body but it work for me --- i'm running schaps 4.31 same problem after upgrading my 8525 any ways after weeks of try with cab , software , downloads I went to the programs them self and found out that if I disabled the camera icon setting in schaps config then soft reboot it works every time ( the icon actually is still there on today screen) been 2 days no errors before fix -- soft reboot use cam once errors till I reboted again hope it helps repost your findings might just be a freak incident
Hello Guys,
I am pretty much new to Android here (Used to be a Windows Mobile user), although I am starting to read and learn more about it. I felt so happy to be out of the Microsoft Mobile spell, it was horrible and the software just lives in the world of its own, it lags at almost anything and in short, it just cant work.
Alright, so I got my Hero 2 weeks back and I wanted to know a few things, which I hope you can help me with it.
- I have about 60 over applications on my SD card, and I wish to use the MoDaCo ROM, How am I able to backup the applications from the current stock rom and transfer them to SD Card or somewhere else?
( Will Market still recognise the apps I downloaded after I flashed my phone to MoDaCo? )
- One more question, everything when the MoDaCo rom releases a new version, lets say from 2.9 to 3.0, must I reflash and build everything from scratch again?
Thanks A Lot,
Jeremy
jeremy89632 said:
Hello Guys,
I am pretty much new to Android here (Used to be a Windows Mobile user), although I am starting to read and learn more about it. I felt so happy to be out of the Microsoft Mobile spell, it was horrible and the software just lives in the world of its own, it lags at almost anything and in short, it just cant work.
Alright, so I got my Hero 2 weeks back and I wanted to know a few things, which I hope you can help me with it.
- I have about 60 over applications on my SD card, and I wish to use the MoDaCo ROM, How am I able to backup the applications from the current stock rom and transfer them to SD Card or somewhere else?
( Will Market still recognise the apps I downloaded after I flashed my phone to MoDaCo? )
- One more question, everything when the MoDaCo rom releases a new version, lets say from 2.9 to 3.0, must I reflash and build everything from scratch again?
Thanks A Lot,
Jeremy
Click to expand...
Click to collapse
hi,
well to answer your questions,
you can install all your applications directly on your sd card using app2sd.(it is incorporated in the modaco roms but bear in mind you have to correctly format ur sd card in ext3 partition for app2sd application to work . Once you've done that , you can flash anything and you'll not have any problem.
2)concerning paid applications, yes. market will automatically recognise applications you bought once you sign in your google account(they'll be recognised but you'll have to download it manually) but paid ones, nope.
3)when you upgrade from the same built( meaning from 2.8 to 3.0 modaco for example) , you dont have to wipe before flashing cause both roms use as base the official 2.73 rom. thus you wont lose any of your settings. However, when you upgrade from a modaco rom to community rom 1.6 , you should normally wipe.(builts are not the same here, one being cupcake and the other eclair)
deeren said:
hi,
well to answer your questions,
you can install all your applications directly on your sd card using app2sd.(it is incorporated in the modaco roms but bear in mind you have to correctly format ur sd card in ext3 partition for app2sd application to work . Once you've done that , you can flash anything and you'll not have any problem.
2)concerning paid applications, yes. market will automatically recognise applications you bought once you sign in your google account(they'll be recognised but you'll have to download it manually) but paid ones, nope.
3)when you upgrade from the same built( meaning from 2.8 to 3.0 modaco for example) , you dont have to wipe before flashing cause both roms use as base the official 2.73 rom. thus you wont lose any of your settings. However, when you upgrade from a modaco rom to community rom 1.6 , you should normally wipe.(builts are not the same here, one being cupcake and the other eclair)
Click to expand...
Click to collapse
Thanks A lot for your response, and I have some questions again.
- Where could I find an app to format my SDCard to Ext3? Will my Windows PC still be able to read EXT3?
- You mentioned that market will recognise my downloaded applications after I root the phone right? So, I dont really get it - I have to download it manually? Meaning? ( All my apps are free, no paid )
- Its pleasing to hear that I don't have to wipe when I upgrade to 3.0.
- Oh and something which I missed out, I am supposed to flash a Radio at the same time right? Which one is the best to date? I heard that there was many versions. ( I'm using a GSM Hero)
Sorry for the inconvinience.
Cheers,
Jeremy
Hi all, I need some help with my Folio 100. I have installed V1.3b FolioMod on my tablet and apparently everything works OK, all the applications work fine, Wifi is Ok........ but I've noticed that have stopped responding both SDcard slot as the USB port. I tried by all means go back to the stock mod but no way to do it since it seems not to find the SD.
In addition, reviewing the tablet with the file manager seems to be nothing in the internal storage (or folders or files). I´ve tried to connect with my computer using the mini usb port but I can´t.
Could anyone help me to recover my Folio????
Thanks and sorry for my english but It´s rusty
Try removing the battery for at least 5 minutes or so.
Hi Nemo0815, thanks for your response. I have removed the battery for half an hour and no change has happended.
Cheking the Folio in the device storage settings I have found that the total space in the internal storage is 0.00B and I don´t know where is the storage space.
Regards.
this happened once for me too, i just removed the battery, waited 30secs while holding power button down, so i could drain it for all remaining power..
inserted battery and all was ok, and usb was working again.
looks like he's having the filesystem-not-mounting bug.
Hi Dexter_nlb, I have tried your suggestion and the problem is still there.
I´m thinking if the problem could be in relation with the missing storage capacity.
Thanks.
pasting from first post of foliomod thread:
V0.0+ Generic format internal storage for all mods (so far) here, only needed if you got internal storage problems.
Rename downloaded patch to update.zip and install using recovery.
see if that one helps.
uh.. silly me... you have no way of getting it on there :S
you could try to remount using ADB, but i have no clue on how.. it should be somewhere in the foliomod-thread though.
Hi kepler1982, problem is the Sdcard slot don´t work.
Thanks
Rutherfor said:
Hi kepler1982, problem is the Sdcard slot don´t work.
Thanks
Click to expand...
Click to collapse
read my updated post
Rutherfor said:
Hi kepler1982, problem is the Sdcard slot don´t work.
Thanks
Click to expand...
Click to collapse
you can always reach it with adb and a folioMod installed, through recovery..
so if you can install adb (android sdk tools) + the proper driver, you can at least login and see what is wrong..
but if a sdcard slot is not working at all, that can also be your sdcard not supported, many others has the "16GB" problem using NTFS formatted cards.
make sure the sdcard is fat32 formatted, make sure you put a "update.zip" in the root, when recovery should try and find it..
Hi kepler and Dexter. I´m installing SDV but I never used it before. Some help with this tool are welcomed.
Thanks
Hi guys im thinking of buying this device... but are there many problems with it? Can you acess the android market yet?
olyloh6696 said:
Hi guys im thinking of buying this device... but are there many problems with it? Can you acess the android market yet?
Click to expand...
Click to collapse
Yep maybe it's better for you to have a look in the foliomod topic, in the android dev. section. there you can read what is already possible
killerbie said:
Yep maybe it's better for you to have a look in the foliomod topic, in the android dev. section. there you can read what is already possible
Click to expand...
Click to collapse
Thanks mate , sorry about not checking!
(BTW my thanks limit is full) Sorry
any answers?...please
Hi
I just updated to 1.3d and now have the same problem...cant read sd-card or usb, shows 0.00 mb of space on the "main" memory. Cant make new directory......well can do anything except using the sd-card and usb.
Have tried to take the battery out in both short and long time...nothing helps.
I hope someone can help....maybe Dexter I use the Folio to read cartoons and watch video..but now I cant get anything new on it
best regards
showdogs
come on
Noone has an answer?????really need some help.
showdogs said:
Noone has an answer?????really need some help.
Click to expand...
Click to collapse
read the wiki's opened, those are there to help in such cases..
Hi, I had this problem once and I solved it like this :
1. Extract SD card.
2. Wipe your device, with the blue screen etc
3. Then install FolioMod 1.3d
For me it works, but yes i know all your data will be gone after this...
By the way, thank so much to you Dexter who transform my Folio in a great device. Keep going on !
Same problem
Hi, I have the same proble and symtoms are:
· No sdcard (neither internal nor external). In this state, update fails, because external SD card can't be reached. I've tried FolioMod13d, FolioStock and File system format, but they fail.
· Tablet sometimes starts, but you can't do anything, because neither internal storage is not available, nor external.
· Cannot reach tablet through ADB, because USB link cannot be stablished.
· Have tried extracting battery, pushing on/off button, internal "reset" pin point, putting a piece of paper, tighting screws... no result
· Sometimes, when starting, starts vibrating and keeps all time like that, untill you stop the device.
· And sometimes, tablet even doesn't start, you get only black screen. Other times, you got start screen, but flashing "Android" does not appear.
All things had been tryed on full battery and low battery. Non starting problem appears often when low battery.
Sugestions?
I have to say that your Folio seems to be be very capricious, I never had so much problem with mine.
If you can't switch it on and if it's still cover by warranty try to bring it back to your seller.
Sorry to be unable to help you...
This is a link to a Zune client download of the latest release of Mango (7712). Hopefully a dev can use it and make a ROM of it for our HD2s.
http://forum.xda-developers.com/showpost.php?p=16065240&postcount=204
Is 7712 another beta, or just announced RTM?
sthEn said:
Is 7712 another beta, or just announced RTM?
Click to expand...
Click to collapse
another beta according to microsoft developer team
keyro said:
another beta according to microsoft developer team
Click to expand...
Click to collapse
yes, another beta (maybe beta 3) but this time twitter integration seems to be working.
I am waiting patiently for a ripe mango build.
Actually, this build is now RTM, so it is a final one
The RTM build is 7720.
But this is close enough for now!! ;-)
Source:-
http://www.wpcentral.com/more-mango-developers-7712-update-sdk-beta-2-refresh
(don't use the above instructions for HD2)
wideawake said:
The RTM build is 7720.
But this is close enough for now!! ;-)
Source:-
http://www.wpcentral.com/more-mango-developers-7712-update-sdk-beta-2-refresh
(don't use the above instructions for HD2)
Click to expand...
Click to collapse
Wideawake - Do you think we can use http://windowsphonedaily.blogspot.com/2011/07/how-to-update-to-new-mango-beta-without.html on the HD2 instead?
Joris77 said:
Wideawake - Do you think we can use http://windowsphonedaily.blogspot.com/2011/07/how-to-update-to-new-mango-beta-without.html on the HD2 instead?
Click to expand...
Click to collapse
No, you can't use any update methods like that.
Moon2 said:
No, you can't use any update methods like that.
Click to expand...
Click to collapse
his right you need to rebuild the rom for the hd2 ... that is the drivers that are in those builds are not compatible with the HD2,
and your phone will look at you funny if you try to use those methods....
Moon2 said:
No, you can't use any update methods like that.
Click to expand...
Click to collapse
the dft green mango acn update to 7661, perhaps you can make this buts you have 1 chance to 1 to destroy your SDCARD
dAV84 said:
the dft green mango acn update to 7661, perhaps you can make this buts you have 1 chance to 1 to destroy your SDCARD
Click to expand...
Click to collapse
What do you mean destroy your sdcard? Your sdcard isn't destroyed when you run wp7, all you have to do is delete the partitions and re-format it via a computer..
e334 said:
What do you mean destroy your sdcard? Your sdcard isn't destroyed when you run wp7, all you have to do is delete the partitions and re-format it via a computer..
Click to expand...
Click to collapse
No, he is correct, certain methods of update on hd2 destroy your card completley, This has been known about for a while now.
What you are mistaken for is simply flashing your rom and it getting partitioned.
2 different scenarios.
Yes, your sdcard will be destroyed, gone, dead and there is nothing you can do to make jt work again. I have tried it myself today.
hyellow said:
Yes, your sdcard will be destroyed, gone, dead and there is nothing you can do to make jt work again. I have tried it myself today.
Click to expand...
Click to collapse
Your sdcard is not dead, just locked with a password at least that is what a Nokia E51 reports when you format it.
I have attempted the update to 7661 several times with a 4 and 8 gig sandisk card each time the cards appear to be useless, but I recovered the cards by formatting them in a Nokia E51 phone.
Regards
TheATHEiST said:
No, he is correct, certain methods of update on hd2 destroy your card completley, This has been known about for a while now.
What you are mistaken for is simply flashing your rom and it getting partitioned.
2 different scenarios.
Click to expand...
Click to collapse
Oh, i see, I'm glad that my 2GB doesn't cost that much then lol
Strop said:
Your sdcard is not dead, just locked with a password at least that is what a Nokia E51 reports when you format it.
I have attempted the update to 7661 several times with a 4 and 8 gig sandisk card each time the cards appear to be useless, but I recovered the cards by formatting them in a Nokia E51 phone.
Regards
Click to expand...
Click to collapse
right, it is known for a long time
Strop said:
I have attempted the update to 7661 several times with a 4 and 8 gig sandisk card each time the cards appear to be useless, but I recovered the cards by formatting them in a Nokia E51 phone.
Regards
Click to expand...
Click to collapse
So can you test to update from DFT to 7661 and after to 7212
I can't broke the only 32GB i have.
Thanks
i put my "destroyed" card in a n87 mini formatted no problems
did the procedure several times and have not had a problem.
[edit]
my sony alpha 33 says the card is locked, what it appears to be is the card gets locked similar to a ATA lock that the origonal XBOX did. only with the ATA lock you had to unlock the drive before you could do anything to it.
On the nokia click cancel to the security code prompt, open file manager then the sd card. press options and find format.
cheers
scobber
Mango tried to kill my SD too
Just to chime in: when I tried a green mango ROM, my SD card seemed pretty broken too. I fixed it by flashing a stable verson of WP7.
No problem!
guys, i had CM7proV21 rom in my mini pro, but i had problems and i used seus to be back to SE original rom with android 2.1...
everything is fine, but i can´t use the camera, it can´t record videos and the still images get errors with strange issues... so in video, it stops and can´t record. Almost on .21 or .40 seconds... and so, tels there is no space as my SDCARD is 16G!!!!
i tried to root the phone again and resintall V20 from the custom ROM, but i can´t get xRecovery to work...
don´t know what to do anymore... help
You should try to use CWM instead of xRec as it's widely used by any of these ROMs, and if I'm not wrong, MiniCMPro (as any other ROM would do) used CWM since V6/V7...
To fix these problems you can try to do a factory reset in CWM and clean dalvik or reinstall MiniCMPro, do a factory reset (in ROM and CWM, wipe everything (cache, dalvik) and then using SEUS to restore the original ROM, or maybe use pfonck's '2.1.1.Clean.0.0' ROM instead
Good luck!
azhhael said:
guys, i had CM7proV21 rom in my mini pro, but i had problems and i used seus to be back to SE original rom with android 2.1...
everything is fine, but i can´t use the camera, it can´t record videos and the still images get errors with strange issues... so in video, it stops and can´t record. Almost on .21 or .40 seconds... and so, tels there is no space as my SDCARD is 16G!!!!
i tried to root the phone again and resintall V20 from the custom ROM, but i can´t get xRecovery to work...
don´t know what to do anymore... help
Click to expand...
Click to collapse
Hi, azhhael !!
1: I had almost same video problems on MiniCM7pro V21 (you said CM7proV21 ??) as yours before.
So I did reinstalled, then it problems to solved.
2: Did you read post of everything on the thread of [ROM]MiniCM7Pro - V21 + Lite Versions by Paul-xxx again ?
There are so many good hint for you. So you should to read [who given important hint] by your self, I think...
3: You said [resintall V20 from the custom ROM (?)], is that meaning [already to installed MiniCM7Pro V20]
You said [i can´t get xRecovery to work], but maybe you must have Cwm recovery v3.2.0.0 r4 or later.
If you don't have any [ClockWorkMod (CWM)], I think [link of following] is most easy way to enable CWM.
Try it !!
[RECOVERY] ClockWorkMod Installer - Windows v4 - Linux v4
Thx to Paul-xxx and rect2409
pls: I love custom rom of Paul-xxx too and I think a he is artist of genius.
So sometimes hard to enable. But when overcome the problems, can got another awesome world.
By the way....I'm very sad about he lost the his u20i...
Sorry about my very bad English.
-------------------------------------------------------
PHONE: X10 Mini Pro U20i
ROM: CyanoCream Sandwich V2.0 by Mr.Plancton.fr
KERNEL: ZonbiePanic V1.63 by Mr.slade87
Echo6502 said:
[RECOVERY] ClockWorkMod Installer - Windows v4 - Linux v4
Thx to Paul-xxx and rect2409
-------------------------------------------------------
PHONE: X10 Mini Pro U20i
ROM: CyanoCream Sandwich V2.0 by Mr.Plancton.fr
KERNEL: ZonbiePanic V1.63 by Mr.slade87
Click to expand...
Click to collapse
THANK U SO MUCH! I have now the CWM installed.
I installed Pauls´v21 ROM version again, tryng to see if video is fixed... but no... i could not have it working, it freezes and force stopping the camera app.
And now, i call make calls! When i try to call anyphone number it cancels the calling before calling ring...
oh god...............don´t what to do anymore
azhhael said:
THANK U SO MUCH! I have now the CWM installed.
I installed Pauls´v21 ROM version again, tryng to see if video is fixed... but no... i could not have it working, it freezes and force stopping the camera app.
And now, i call make calls! When i try to call anyphone number it cancels the calling before calling ring...
oh god...............don´t what to do anymore
Click to expand...
Click to collapse
OK i know ur worried abt ur phone... but dude.... this is the DEV forum!! ur question should be in the QnA Forum!!!!
having said that, i dont understand what u want...
do u want stock rom on ur phone??(if so use SEUS)
do u want video recording to work for longer time??(if so clear ur micro SD card as u said it's full)
do u want minicm pro to work correctly?? (if so then wipe data in CWM recovery and then install miniCMpro's latest zip)
He already used SEUS, but his camera isn't working. You got it wrong.
About your problem, try reinstall SEUS and use it again (I haven't found the update files). Maybe the Android got corrupted in the download.
Sorry for english, btw
Sent using Mini CM7 Pro by Paul
azhhael said:
THANK U SO MUCH! I have now the CWM installed.
I installed Pauls´v21 ROM version again, tryng to see if video is fixed... but no... i could not have it working, it freezes and force stopping the camera app.
And now, i call make calls! When i try to call anyphone number it cancels the calling before calling ring...
oh god...............don´t what to do anymore
Click to expand...
Click to collapse
You're welcome !!
However, you still can't problem solving and now + call problems detected...
Huuu... I can understand your feeling.
But please don't be give it up, you should be help your device !!
If I having fee time, I want try to reinstall MiniCM7Pro v21 on my device for the check but I don't have much time at now.
If you had only video recording problem, relatively easy to understand.
But now you had also phone call problems, maybe it is not MiniCM7Pro v21's problem I think..
So let's one more try:
SEUS (download & Install) again -> Flash SE latest firmware -> Root -> Install CWM -> Download & Install MiniCM7Pro v21 again
And Let's write on the note about what do you do at each steps every time for make recipe of Install custom roms
When you got good result, it recipe will can help another people in here !!
Felimenta97 said:
try reinstall SEUS and use it again (I haven't found the update files). Maybe the Android got corrupted in the download.
Click to expand...
Click to collapse
+1
Sorry about my bad English.
Felimenta97 said:
He already used SEUS, but his camera isn't working. You got it wrong.
About your problem, try reinstall SEUS and use it again (I haven't found the update files). Maybe the Android got corrupted in the download.
Sorry for english, btw
Sent using Mini CM7 Pro by Paul
Click to expand...
Click to collapse
1) er... camera seems fine according to what he says...
azhhael said:
........
everything is fine, but i can´t use the camera, it can´t record videos and the still images get errors with strange issues... so in video, it stops and can´t record. Almost on .21 or .40 seconds... and so, tels there is no space as my SDCARD is 16G!!!! .....
Click to expand...
Click to collapse
2) That's why, Preferably the original asker should clarify his questions
If SEUS downloads the entire rom, only then will it proceed to install it on your phone. otherwise installation wont even start.. seems like a problem with your SD card buddy...
SD CARD?
OH!!!!!!!! Can the Sd Card cause so much problems in the ROM installation? I though the ROM should be installed in the internal memory!!!! That´s really make sense... cause i got real problems after change my SDCARD from 4G to 16G one!
May i be back to 4G?
Mini Pro can´t support 16G CARD???
Yesterday i did:
1 - factory reset > wipe cache > wipe dalvik cache
2 - using CWM installed MiniCM7Pro v21
3 - though was strange as paul say in his page:
- Root (OK)
- CWM 4 (x)
- For CWM 3 Read Here (OK)
- Only 2.1.1.A.0.6 SE firmware (OK!)
- Baseband: M76XX-TSNCJOLYM-53404015 (OK!)
I followed all the instructions for user with CWM 3, so after the first ROM installation the CWm should be modified to 4, but it didn´t happened. May it has caused all the problems?????? (vídeo, callings didn´t complete, and NO APP could work!!! I installed but just got erros and erros forcing to close the apps)
How can i make sure CWM4 is installed???? Is there no manual installation for this version!?
4 - ok... ignoring the version of CWM V21 was installed and i got this erros:
- video freezes
- camera with artifacts in images causing serious deffects and making it unusable
- no calling completing
- error installing some app from market and when i could install no one of them could open, just got force closing erros making me uninstall the app (neither Titanium backup could work!)
- didn´t test more, cause i was so frustrated i gave up
5 - today i did all again
factory reset > wipe ALL again
used SEUS to reinstall (repair) the SE last ROM
- calling it´s ok
- didn´t test app installing from market yet (i´ll post here as soon as i do it)
- camera can take pictures, but video still freezes near 40 seconds recording
is all this cause of the SDCARD??????
OMG so... i´ll have to be back to my old 4G CARD?
BUAAAAAAAAAA
Hello again azhhael
Woooooow !!
Your report is really perfects
I can understanding the sequence of your events to easily.
But.......................Why can't you solved ?
Maybe SD card caused ?
If you can, try back to 4 gb and install MiniCM7pro again.
Then if without problem and work will be fine, give me a your 16 gb
However, can you see the inside of sdcard via MiniCM7pro ?
Because Video recording (40 second) data saving to where ? To phone memory ?
>> camera can take pictures, but video still freezes near 40 seconds recording
40 second use how many mega byte ?
Maybe sdcard cause call memory cause then meltdown...
I'm sorry today was don't sleep all night, so now I'm stupid already.
I go sleep now
After wake up I thinking again.
By the way if you tried something and got any result, please posting here !!
Hello Echo... hope u have rest time this night.
I'll report again what is happening now.
After all i told before in the last post, i came back to SE ROM and got this:
USING 16G SDCARD
- calling it's ok
- camera take pics but when i try to visualize it in the gallery i just get artifacts
- video freezes and the mobile STOPS! (i could see that files from camera r in SDCARD in the DCIM folder... as i think it should be...)
- app didn[t work sfter install and some others neither got installed
CHANGED TO THE OLD 4G SDCARD
- calling it's ok
- camera take pics
- video it's ok
- app are all ok
so... eliminating all i believe the problem is the card... is it right? Mini pro can't support 16G SDCARD? No way! I bought 4 of these ones!
I believe that if i install v21 now it will work fine, but before i try to install v21 again i[ll one more test, i will format another 16G card, i'll create ext2 and fat32 partitions (as my 4G is) so i'll try to use it instead of the 4G card. If it works fine, may be a card problem to access the data... at least that's what i think so now...
so, after find the answer for this question i'll be back to v21, hope it's fully working... hehehehe no issues...
tomorrow i'll test it all and so i'll post here, maybe as u tell me i can help another one with my problems described here
Hey. Don't go sleep yet. I have the same problems as you, but with diferrent card sizes. My 2 Gb Sd Card that came with the phone was too small for me, and I bought a 4 Gb (I don't need that much, but 2 Gb + helped).
I was using the Sd Card ultil I had the bad idea to fix my Mp3 tags (album art, in fact). When I have done that, I put my musics in my SD and music started to have some bugs (I can't describle it).
I could live with that. But all my photos started to corrupt and photos taken started to get cut (50 to 90 per cent was a grey, and the rest blur).
Came back to My 2 Gb Card, everything worked fine.
About 4 weeks later I, don't know why, had the idea to test again my 4 Gb Card. It worked fine. But I had forgot why the Card was corrupted, and had the brilliant idea to fix Mp3 Tags again. -.- My mistake. Card got corrupted again. Now I have all the problems I listed above, and .apk files have Problems Parsing the Package.
And I can't go back to 2 Gb card because I have lots os apps on SD and about 20 more musics.
(OMG, never wrote a text like this in this forum).
Sent using Mini CM7 Pro by Paul
azhhael said:
Hello Echo... hope u have rest time this night.
Click to expand...
Click to collapse
Thanks for your kindness azhhael !!
Btw, Oh.. you did good work again. I see, many hints in there.
+ Today I asked friend and he told me:
before he was install MiniCM7Pro v21 + 16Gb
At 1st time: He found cheep 16Gb microSDcard class 4 but no brands (china).
He got same problem as your's !!!!!
At 2nd time: He buy another 16Gb microSDcard class 6 of true Sandisk.
He solved problems and he still using U20i with MiniCM7pro v21
The meaning which it points out is MiniCM7pro v21 supported 16Gb.
But !!!! He forgot about how to installed. So I did kicked his ass !!
I will waiting for your new reports (I wishing good result)
Hi, Felimenta97 !!
Whaaaaaat ??? Oh my god, you have same problems as azhhael ?
So many guys having same problems with MiniCM7pro v21...
But you are lucky. azhhael trying a lot at now, so maybe will be solve soon !!
Paul Please comeback !!!!!
Please try pc companion.
Echo6502 said:
Thanks for your kindness azhhael !!
Btw, Oh.. you did good work again. I see, many hints in there.
+ Today I asked friend and he told me:
before he was install MiniCM7Pro v21 + 16Gb
At 1st time: He found cheep 16Gb microSDcard class 4 but no brands (china).
He got same problem as your's !!!!!
At 2nd time: He buy another 16Gb microSDcard class 6 of true Sandisk.
He solved problems and he still using U20i with MiniCM7pro v21
The meaning which it points out is MiniCM7pro v21 supported 16Gb.
But !!!! He forgot about how to installed. So I did kicked his ass !!
I will waiting for your new reports (I wishing good result)
Hi, Felimenta97 !!
Whaaaaaat ??? Oh my god, you have same problems as azhhael ?
So many guys having same problems with MiniCM7pro v21...
But you are lucky. azhhael trying a lot at now, so maybe will be solve soon !!
Paul Please comeback !!!!!
Click to expand...
Click to collapse
All my problems was with stock ROM. The problem with the music was that, let's say, music 1 is playing, and sudenly, some random point of music 2 starts playing for, like 2 to 3 seconds, and goes back to normal. It did happen 2 to 10 times, depending on the file.
Now, with Mini CM7 Pro the problem is lightly different. it don't play stretchs of the music, it just jumps to another music.
The problems with another types of files are the same.
When I got this problem, I was trying to install Gin.Tonic ROM, and the recovery was saying there was a problem with the package. I tought it was a recovery problem, used SEUS to reinstall Android. Root, xRecovery, CWM Recovery, the problem persisted. After 2 to 3 months later (about 3 weeks ago, I realized the problem was with the SD Card.
Now everything I install, apps, morphs, and Backups I use my 2 GB SD card.
And you are from Japan, that nice. I want to go there one day, but I have ZERO knowlege on Japanese. Want to go just because I played The World Ends with You, in my Nintendo DS, and loved the Shibuya district of Toquio.
Felimenta97 said:
All my problems was with stock ROM. The problem with the music was that, let's say, music 1 is playing, and sudenly, some random point of music 2 starts playing for, like 2 to 3 seconds, and goes back to normal. It did happen 2 to 10 times, depending on the file.
Now, with Mini CM7 Pro the problem is lightly different. it don't play stretchs of the music, it just jumps to another music.
The problems with another types of files are the same.
When I got this problem, I was trying to install Gin.Tonic ROM, and the recovery was saying there was a problem with the package. I tought it was a recovery problem, used SEUS to reinstall Android. Root, xRecovery, CWM Recovery, the problem persisted. After 2 to 3 months later (about 3 weeks ago, I realized the problem was with the SD Card.
Now everything I install, apps, morphs, and Backups I use my 2 GB SD card.
And you are from Japan, that nice. I want to go there one day, but I have ZERO knowlege on Japanese. Want to go just because I played The World Ends with You, in my Nintendo DS, and loved the Shibuya district of Toquio.
Click to expand...
Click to collapse
Thank you for your precious report Felimenta97
Did you tried CyanoCream Sandwich V2.0 yet ??
Because, now king (Paul) is not home, so develop in under a break.
But develop of CyanoCream Sandwich V2.0 is now still working, so need more tester in there .....But its only my feel
Pls:
Yea, I'm Japanese but I'm living in Hochiminh city of Vietnam and about 5 years I never go back to my country.
Hahaha... No one can control real own future like a god, so life is wonderful !! Don't you think so ?
I was born in Tokyo and kindergarten to elementary school was in Shibuya.
But there are so many people like ants and traffic congestion of car everyday !!
Thx Felimenta97 !! I'm happy to talk with you.
Btw, my friend living in São Paulo city and she is 3rd generation of Japanese. She is soooooo cute
I live in Ribeirão Preto, about 300 Km from São Paulo. I will go for Japan but in a long future (I am only 14 years old and my parent's money, compared to some of my classmates, and American and japaneses in general, is lower. My wishes are to go to Orlando (Universal Studios), then New York and then Shibuya. I am freaking out to see Hachiko (I wrote it right?)!!!
Yeah, it's nice to talk to you too. Have Facebook? Search for ''[email protected]''.
Back to the topic, I tested the version based on Mini CM7 Pro, the latest is based on Flame.E. I am already placed in this ROM, besides some bugs. I think it's because it's the semi official CM7, and accept a lot more tweaks and morphs and etc.
Sent using Mini CM7 Pro by Paul
If you not rooted your phone now, just report it to SE. If you rooted and unlocked bootloader, reflash using SEUS back to 2.1 and lock bootloader
We already solved the problem. It was with the SD Card..
Sent using Mini CM7 Pro by Paul
Felimenta97 said:
I live in Ribeirão Preto, about 300 Km from São Paulo. I will go for Japan but in a long future (I am only 14 years old and my parent's money, compared to some of my classmates, and American and japaneses in general, is lower. My wishes are to go to Orlando (Universal Studios), then New York and then Shibuya. I am freaking out to see Hachiko (I wrote it right?)!!!
Yeah, it's nice to talk to you too. Have Facebook? Search for ''[email protected]''.
Back to the topic, I tested the version based on Mini CM7 Pro, the latest is based on Flame.E. I am already placed in this ROM, besides some bugs. I think it's because it's the semi official CM7, and accept a lot more tweaks and morphs and etc.
Sent using Mini CM7 Pro by Paul
Click to expand...
Click to collapse
Thanks for your reply Felimenta97 !!
Wow.. You know the Hachiko- ??!! Very famous dog of sculpture in Shibuya
And you are 14 years old... It is enviable to me. Hahaha... now I can't telling my true age !!
I wish to you will be get future which you desire
>>Have Facebook? Search for ''[email protected]''.
No.. not yet. Because it can't connect from Vietnam until recently.
So I will make account later.
About topic:
Yeah.. almost you are right.
But, let's me now about what is accepted tweaks and morphs of it to concrete ?
I'm not testing you, I just only want to clarifies Them for me
Sorry about my English..