Hi.
I wanted to update my x10 mini pro to the latest firmware. It didnt work throught the updater, it said I had the latest but I didnt (i had Baseband 006 - kernel 2.0.A.0.504). So I followed this rendeiro2005 "[FLASHTOOL GUIDE] HOW TO for n00bies" I downloaded the nordic version, but nothing happend, tried to update it but still said there where no updates. So then I downloaded the UK version, then It found the new update, it worked halfway through the update and then the computer died.
Now either nothing happens, I mean it doesnt find the phone via usb, or the computer dies. I tried to uninstall/reinstall PC companion with revo uninstaller, didnt work. Then I tried to start the computer in safe mode and that didnt work either. And I have tried all three different ports. I tried to turn of the phone and connect it and then the computer snap shutdown. (the usb worked fine all day today before I tried to upgrade).
Thanks
Now I¨ve tried to uninstall flashtool and the drivers installer that comes whith it, also uninstalled PC companion. And used the guide "how-to-remove-old-unused-device-drivers-in-windows-7" to deleted some drivers that I suspected have something to do with the phone. At least the computer doesnt die now. But still it doesnt find the phone when I plug it in. I tried the "silent mode trick", but didnt work either.
I dont think theres something wrong with the phone. I did a backup with titanium before but I cant get to it now since the phone isnt rooted anymore after the FW update.
Do you have the Debugging mode enabled? if you have it, try disabling.
Ya tried that to. No success. Even formatted my computer. Nothing. Then I wanted to charge the phone, ordanary rechargeching, that didnt work either. So it must be something with the phone. Have no clue how to get around it. Tried hard reseting it also. Nothing. I guess is something with the new firmware upgrade. Is there any way to go back without using usb?
Is there a way to update/downgrade it wireless?
If the usb is broken, can I send it to SE and have it repaired? (The phone is secondhand without reciept)
You can send it to the SE care centre to get it repaired but you will have to pay because it is out of warranty.
regarding your pc, does usb work other than your phone? im wondering how a connection like that to the phone makes the pc go dead!
There maybe something with the pc or the phone. check with the hardware wires are connected properly and try some other usb device (pendrive etc) and check if the usb works well. then you dont need to doubt about the pc next time.
if pc works then you have to check with your phone and see if that doesnt work.
Other than that i dont know if it will be software (windows xp,7, or other s/w) matter but something on hardware. doubting the phone. so please check it out.
Thanks and good luck on your search!
Do you know how much it can cost to get it fixed?
Ive tried to reinstall windows, didnt work. Tried linux, didnt work. Ive tried other usb devices and they work. After reinstalling the phone doesnt kill the computer anymore atleast. So I guess its the phone. I wont charge when its of either.
Everything worked fine halfway through the update with pc-companion. After that the phone lost connection and never got it back since. What do you think, any chances?
Related
Hi all!
I'm hoping someone here can help me because I'm about to throw my phone out the window and I'd really rather not.
I have a rooted Nexus S with Cyanogen 7.1.0.1 and I'm trying to get it back to stock. This would be easy enough, if I follow the instructions here:
nexusshacks.com/nexus-s-hacks/how-to-unroot-nexus-s-i9020ti9020ai9023
but the problem is that my phone won't recognize that it's being plugged into my PC. Before anyone asks, I have tried reinstalling the drivers and I have tried different USB ports and USB cables. Nothing seems to work. I have also tried restoring to an old backup I did months ago when there was nothing on the phone and it still won't recognize it.
Sometimes, very randomly, the PC will recognize that I've plugged in a device but it will automatically say that the drivers could not be installed.
Any idea how I can get this working?
So I upgraded to Cyanogen 9.0.0 and while my phone is running much better now (thanks Cyanogen team!!!) I still can't get my phone or PC to recognize my phone being plugged in.
If anyone can think of a solution, please let me know.
Hello all, I have a GS3 international GT-I9300
I'll try to go through the story as fast as I can and give as much detail so you guys can understand how I got here.
Bought the phone unlocked, I was stock, I rooted and then I decided to install a new ROM. I went with Resurrection Remix, it was working great. I did this on a desktop back home. They released a new update to RR so I did a OTA update with "Update Me" apparently the thing flashed but it didn't, the phone still worked but NFC wasn't working as well as having lost root access and some other stuff wasn't working correctly, but I lived with it.
I moved to Florida (home is in NY) and I have a laptop with me, for some reason my laptop used to be able to transfer files to my S3, but it wasn't doing it any more after a while. So it would just charge it. I was in a hotel room last week trying to tether via USB but the PC wasnt having it, it could not locate the phone. This week I moved to a different hotel with internet and decided I would flash stock on my S3 to get rid of all these bugs and get root again, I tried flashing stock through recovery and it wasn't going, so I tried flashing RR again (this time downloaded from the site RR site) and it worked. Still no USB connection but I had root back. I looked around my PC and apparently the Samsung drives are not installing or something on my PC. I installed Kies, but nothing, I tried a stand alone driver install and nothing, so I just gave up and bought Mobile Odin pro from Gplay to try to flash again.
Mobile Odin for some reason (I blame it on myself) wasn't finding/flashing stock so again I decided to try and flash RR and see what would happen. It flashed RR and turned on fine. Then I just decided to look for an NFC fix on XDA. Once I found my NFC fix (http://forum.xda-developers.com/showpost.php?p=32029713&postcount=8367) I decided to just copy the files to the system folder, NFC still not working, rebooted and NFC still no working, so I figured I would try to flash the fix through mobile odin seeing as how I can't get my PC to pick up on the USB. I tried flashing but MO just kept bouncing it back and re-booting into RR. Tried again and no flash. So I decided to again try and flash stock. I tried going into Recovery, the phone shut off like it always does, came back on but stayed in the Galaxy S3 GT-I9300 logo and would not move. I shut it off again, tried turning it on again and still stuck on the galaxy logo. Now, if I leave the phone off and plug in the USB, it won't show the battery charging image, it will actually turn straight onto the galaxy logo again and stay there. I can get the phone into download mode, but like I said my pc won't recognize the drivers.
Now, here are my questions:
What happened?
Can this be fixed?
Am I an idiot?
If I can get the drivers installed on another PC as well as Odin (1.85), will the new PC "see" the S3 or are the drivers on the phone deleted as well? (if that sort of thing can happen, idk.)
I'm going to see if I can borrow a buddy's PC and download the drivers as well as odin to try and bring my S3 back to life, I just want to know, what happens if I can't get the other PC to pick it up ether because the drivers on the phone are deleted (if that's a thing) or what I can expect if it is connected.
What are the steps or guides to follow here? I just got it into Download mode and it says on the top of the screen:
ODIN MODE
Product name: GT-I9300
Custom Binary Download: Yes (2 counts)
Current Binary: Custom
System Status: Custom
sorry , i am sometime getting headache reading long english text so i just briefly look over.
your PC doesn't recognize your S3 ? is that correct ? hmmm , is it possible that your PC (Microsoft Windows I assume?) system is damaged due to something like virus or some reasons ? i have encountered that kinda problem before and be OK after i reinstalled the system.
If it's a soft brick, then it can defiantly be fixed. You might, however, lose your data along the process.
Be glad it's not hard bricked
It happened to me many times, USB error "unknown device" connected. Only fix for it was reinstalling Windows so better if you can use different PC or laptop. Install Kies and other USB drivers. Restart computer, download and run Odin v 3.0x. Flash your phone.
If this doesn't work then maybe your phone have a problem with USB port?
Sent from my GT-I9305 using xda app-developers app
djembey said:
It happened to me many times, USB error "unknown device" connected. Only fix for it was reinstalling Windows so better if you can use different PC or laptop. Install Kies and other USB drivers. Restart computer, download and run Odin v 3.0x. Flash your phone.
If this doesn't work then maybe your phone have a problem with USB port?
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Don't forget to delete kies as you only need the drivers
Sent from my GT-I9300 using Tapatalk 2
Thanks for the replies guys. I'll try to fix tit today, I didn't get a chance to do it last night. If anything I'll update you guys with what's going on.
Like I was saying, I'll try using a different PC to fix it. Now, if I can't get Odin to recognize the phone, what would be the next step?
Hello,
I have a very big problem with my Samsung Galaxy S3 I9300.
The problem started when my battery ran down very very fast. I can use my phone for no longer than maybe 6 hours, and that is in stand by. If I want to charge my phone till it's completely full it might take two days on the charger as well, even when my phone is off. I tried to reset my phone to factory defaults, but that didn't fix the problem. I even bought a new battery, hoping that would solve the problem, but even no luck with that. The phone also becomes hot in the bottom. Now I wanted to bring it back to the store for warrenty but there lies the next problem, my phone is rooted.
I know it is possible to unroot the phone, and it's nog too hard to do. But every time I connect my phone with USB to my computer, my computer doesn't recognize it. I get the next error message "USB device not recognized". I tried different cables, I tried on an other computer, but still I get the same error. I also tried the S3 of a friend on my computer and with his phone I do get a connection. So I know there is nothing wrong with the drivers on my computer or something like that. There must be something wrong with my phone.
Now the problems won't stop here because there is even a third problem. Like I said before I have rooted my phone, but I can't use SuperUser. When I start SuperUser it says "The SU Binary needs to be updated. Continue?". Then when I press continue I get the message "Installation failed !". I can't use CWM as well. I wanted to use Triangle Away before bringing it back for warrenty, but I can't use it because I can't use SuperUser.
If some one would have an idea to unroot my phone without using USB so I can bring it in for warrenty. Or find a way to get my USB port running again, I think that would fix my problems.
I spend a few hours trying to fix these problems, but now I've come to a point I don't know what to do anymore, I hope anyone of you is willing to help me. I'll be for ever gratefull.
Grtz Nathan...
Hi.
If i was you, i would try to install a official version, using Odin.
Also, my advice is not to use the original charger, Even chinese have better one´s...
Did you install Kies and drivers on your PC? Check that too.
Consider install leaked 4.2.2 version of Rom, since it uses Odin to do it.
I hope i gave at least some clues....
Mord0rr said:
Hi.
If i was you, i would try to install a official version, using Odin.
Also, my advice is not to use the original charger, Even chinese have better one´s...
Did you install Kies and drivers on your PC? Check that too.
Consider install leaked 4.2.2 version of Rom, since it uses Odin to do it.
I hope i gave at least some clues....
Click to expand...
Click to collapse
Thanks for your reply,
I forgot to mention that I have the official ROM installed, I only rooted it. But even if I would want to install a new ROM, my computer doesn't recognize my phone throug USB. So I can't install a ROM using Odin unless my USB port is running again.
I tried several chargers already, I don't think the problem lies in the charger because the battery drains very fast when it's of the charger.
I did install Kies and drivers, I even uninstalled them and reinstalled them again a couple of times. I even tried it on different computers. And the Galaxy S3 of a friend of mine does make a connection. So I don't think the problem lies there.
droogje said:
Thanks for your reply,
I forgot to mention that I have the official ROM installed, I only rooted it. But even if I would want to install a new ROM, my computer doesn't recognize my phone throug USB. So I can't install a ROM using Odin unless my USB port is running again.
I tried several chargers already, I don't think the problem lies in the charger because the battery drains very fast when it's of the charger.
I did install Kies and drivers, I even uninstalled them and reinstalled them again a couple of times. I even tried it on different computers. And the Galaxy S3 of a friend of mine does make a connection. So I don't think the problem lies there.
Click to expand...
Click to collapse
Hummm....
Did you try hard reset? Definitely without USB recognition, you can`t go to next stage....
In setup did you check optinos like USB debugging?
At this moment im out of options....maybe a poweruser can help you better:highfive:
Mord0rr said:
Hummm....
Did you try hard reset? Definitely without USB recognition, you can`t go to next stage....
In setup did you check optinos like USB debugging?
At this moment im out of options....maybe a poweruser can help you better:highfive:
Click to expand...
Click to collapse
What exactly do you mean with hard reset? If you mean powering on with home button and volume up button pushed, and then select "wipe data/factory reset". Then yes, I tried that.
In setup I did check USB debugging. The thing is, when I power on with home button and volume down button, I enter download mode. But even in download mode my computer does not recognize my phone. I'm not sure, but I think the computer should.
I'm really stuck here :crying:
im pretty good with changing roms and doing back ups and all that good stuff. but i installed a 4.3 rom and it wouldnt connect to my pc after that, so i went back to the back up i made and still no connection, so i decided to just do a factory reset to see if that was the problem and it wasnt. ive tried multiple usb cords. no good. i have all drivers installed in my pc and still no connection. all it does is charge. so now im stuck with no root. and doesnt connect to my pc. ive tried the phone thing it was like *#8734# or something like that, just would like to get my s3 to connect again. anyhelp?
What else can i try?
Decotra said:
im pretty good with changing roms and doing back ups and all that good stuff. but i installed a 4.3 rom and it wouldnt connect to my pc after that, so i went back to the back up i made and still no connection, so i decided to just do a factory reset to see if that was the problem and it wasnt. ive tried multiple usb cords. no good. i have all drivers installed in my pc and still no connection. all it does is charge. so now im stuck with no root. and doesnt connect to my pc. ive tried the phone thing it was like *#8734# or something like that, just would like to get my s3 to connect again. anyhelp?
What else can i try?
Click to expand...
Click to collapse
first I would suggest you to choose the right forum.
this here is i9300 international s3
sprint s3 forum: http://forum.xda-developers.com/galaxy-s3-sprint
I am literally having the worst time. I have to go to work in 30 minutes and my phone is now broken. All I wanted to do was update it so I found a rom for my Infuse but now that I installed it, my phone seems to be broken.
Now I am trying to get it back to its normal state, but the only way to do that is put it in download mode(which works fine) and plug it into Odin. But Odin will not detect it no matter what I do. I have tried everything and I am literally pulling out my hair because this is frustrating me so much.
I hear my pc detecting it. I download drivers. I tried installing drivers through kies, but it just sits at 0%. Then I downloaded the galaxy s drivers, which does nothing when I click the setup file(or at least I can't tell that it is doing something), and then I tried finding the download specifically for my device on the samsung website, but when I run that setup file it says Samsung Android USB Modem Software not installed succesfully (9).
I just want to fix my damn phone and this software will not detect it for the life of me.