CM7 .. no network data.. - HTC Aria Q&A, Help & Troubleshooting

I have CM 7 on my Aria. Recently I tried an app from market that claimed to prolong battery life (stupid, i know!). Within few hours I realized that it drained my battery even faster, so I uninstalled it. Ever since, I am unable to use network data (wifi works fine). I did check under "Wireless and networks" and network data is enabled.
I'd appreciate any help.

mrdoc151 said:
I have CM 7 on my Aria. Recently I tried an app from market that claimed to prolong battery life (stupid, i know!). Within few hours I realized that it drained my battery even faster, so I uninstalled it. Ever since, I am unable to use network data (wifi works fine). I did check under "Wireless and networks" and network data is enabled.
I'd appreciate any help.
Click to expand...
Click to collapse
Sometimes just rebooting helps. I would disable wi-fi and enable network data from settings. Then reboot and see if it helps.

I think you must define anew Access point manually under wireless/mobile networks/Access point name, first of all you must refer to your network provider to give you the configurations.

candyone007 said:
I think you must define anew Access point manually under wireless/mobile networks/Access point name, first of all you must refer to your network provider to give you the configurations.
Click to expand...
Click to collapse
Tried rebooting.. That doesn't help.
I think the problem is access point settings. Can someone on AT&T be kind enough to give me the settings. Here is what I need:
Setting > Wireless and networks > Mobile networks> Access point names> ATT:
Name:
APN:
Proxy:
Port:
Username:
Password:
Server:
MMS proxy:
MMS port:
MMC:
MNC:
Authentication type:
APN type:
APN protocol:

Never mind, I googled it and that did the trick. Just in case anyone else is looking for same, here is what worked for me:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
APN protocol: IPv4

Related

hd2-android froyo 2.2 internet/network problem

ok im a noob but i have done my research, i have 2.2 installed, updated kernel, latest zimage. i have researched the crap out of my issue and cant seem to find anything, ive reread everything the devs said to do to make sure i did exactly as they stated. my radio is up to date as well. android itself runs fine, i have went and reset my network, deleted my network and reset it again to make sure its epc.tmobile.com in my apn. when i am to open anything that requires internet connectivity( market, browser, facebook) i get this message "A network error has occured. Retry, or cancel and return to the previous screen" any help is greatly appreciated, im so SICK AND TIRED OF WM6.5 so the sooner the better
thanks
justin
jwdoss said:
ok im a noob but i have done my research, i have 2.2 installed, updated kernel, latest zimage. i have researched the crap out of my issue and cant seem to find anything, ive reread everything the devs said to do to make sure i did exactly as they stated. my radio is up to date as well. android itself runs fine, i have went and reset my network, deleted my network and reset it again to make sure its epc.tmobile.com in my apn. when i am to open anything that requires internet connectivity( market, browser, facebook) i get this message "A network error has occured. Retry, or cancel and return to the previous screen" any help is greatly appreciated, im so SICK AND TIRED OF WM6.5 so the sooner the better
thanks
justin
Click to expand...
Click to collapse
I got that too, it was APN related in my case..
Even though I had a 3G or H icon, for some reason I didn't have internet.. Just changed some APN settings (deleted the old, added some new) and everything was fine again.
I don't think this post belongs here in android development though
what all did you change in the apn settings?
and sorry about that, if a mod could move this thread it would be greatly appreciated
thanks
PPP, RMNET related? try different kernal
I m sure u must have tried already but just thought I ll make sure anyway ...
APN: epc.tmobile.com
The rests are blank (not set) until you get to MMSC.
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy & port are <not set>
MCC: 310
MNC: 260
APN type: default,supl,mms
though this does make the data work for me i still get slow responses for data after i get it up. I mean like when i start my browser on my phone it takes around 5 secs for a cold start ... hope it helps ...
and yes ... it wud help if this is moved over to a different thread ...
These are the APN settings I have with no problems
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: (leave this blank)
Port: (leave this blank)
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: (leave this blank)
MMS Port: (leave this blank)
MCC: 310
MNC: 260
APN Type: (leave this blank)
And MODs don't worry about the wrong post section Fudge it just leave it...
Damn noobs. Quit opening threads
First, if you want help, good to let us know what builds etc. you are using and where you are. I'm not sure, but epc.tmobile.com may not be right in non-US locations.
I occasionally get this error, but not continuously. Is your data turned on in settings? You might also use the hidden settings menu *#*#4636#*#* to verify the data is on. You see an H/3G/E symbol on your notification bar?
i dont get it, the fancy 4636 menu doenst help me. i can access market and browser, but the menu says i have no connection at all.
jwdoss said:
ok im a noob but i have done my research, i have 2.2 installed, updated kernel, latest zimage. i have researched the crap out of my issue and cant seem to find anything, ive reread everything the devs said to do to make sure i did exactly as they stated. my radio is up to date as well. android itself runs fine, i have went and reset my network, deleted my network and reset it again to make sure its epc.tmobile.com in my apn. when i am to open anything that requires internet connectivity( market, browser, facebook) i get this message "A network error has occured. Retry, or cancel and return to the previous screen" any help is greatly appreciated, im so SICK AND TIRED OF WM6.5 so the sooner the better
thanks
justin
Click to expand...
Click to collapse
I was having a similar problem. Lost data connection for no reason (not for a little while, but for an hour), so I did this: Rebooted using the "recovery" option, went into WM and checked if data was running there and it was. Went back to Android and viola! Data connection was back.
Hope it works for you
My settings as well
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: (leave this blank)
Port: (leave this blank)
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: (leave this blank)
MMS Port: (leave this blank)
MCC: 310
MNC: 260
APN Type: (leave this blank)
radio 2.10.531.1, im in texas, i have tried several diff zimages, made sure everything was up to date and same problem. i checked my apn settings before and everything was right, i am about to boot into android to double check and make sure. thanks for the help.
ok so apn settings are default, but the apn is selected to the on. the kernel is 2.6.32.15, what kinda gets me is that it is on the tmobile network, it shows my signal strength, and that the mobile network type is edge, service state in service, mobile network state is conected
ok just a quick question...is the time set right in your setting...i had the same issue and believe it or not if the time is off the market, browser or anything data will not work...learned from past experiences.....
ArsonALL said:
These are the APN settings I have with no problems
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: (leave this blank)
Port: (leave this blank)
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: [cant post url cause i'm new]
MMS Proxy: (leave this blank)
MMS Port: (leave this blank)
MCC: 310
MNC: 260
APN Type: (leave this blank)
And MODs don't worry about the wrong post section Fudge it just leave it...
Click to expand...
Click to collapse
I was having the same issue as the OP, did this and it fixed it. ty.
yes my time is correct, i kinda thought about that from when i had eclair on my g1, in the top of my screen it just shows 4 full bars, no 3g or e or anything
o and my google account will not sync.
what are ur apn settings exactly????? have u played with any settings at all??? if not u should read the post about ppp disconnecting and read about the settings....it has some advanced settings and if u fallow them correctly u should get your data working correctly.....
my apn settings are default.... ill have to check out other people messing with their apn
jwdoss said:
my apn settings are default.... ill have to check out other people messing with their apn
Click to expand...
Click to collapse
did you edit your build.prop? Today I never had any data loss. I am using Simple Mobile (and their using T-Mobile Network).
try these settings
ok so i tried the settings with the first post and it actually made things worse so i did some research and found these(listed below)....and i used the libhtc_ril_wrapper....i also copied the back up file onto my computer and deleted it from the phone.....and reset the settings from root explorer-system-build.prop...back to defaults..... and so far these settings are getting 5 mbs (average download) and 1.6 mbs upload here in spokane, wa.....and its been almost three days and no problems----YET(knock on wood) and my weather, facebook, twitter, sync every hour.....just thought i would say what i have been using and what is working.....see if it helps anyone out....just a noob tryin to help....
edit- BTW im running the portable wifi hotspot and its not crashing.....
T-Mobile
APN: wap.voicestream.com or internet2.voicestream.com
User Name And Password: guest (for the 2nd APN only) leave in blank
NEW APN: epc.tmobile.com no username or password-(this is the 1 i use...but they all work...just speed difference)
Timeout: 15 minutes
Primary gateway IP: 216.155.165.50
Port: 8080
Secondary gateway IP: 216.155.165.50
Port: 8080
MMS Mmsc Server: http://216.155.174.84/servlets/mms Proxy: 216.155.165.050:8080
HTC HD2-T-mobile/at&t
radio-2.15.50-europe radio
dexter- the dark one rom
Mdeejay_FroYo_Sense_v._2.5_NextSense
16gb class 2 sdcard
no never edited my build.prop. ok heres some "good" news if you classify it as good, i tried a apn setup wich is Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username: Blank
Password: Blank
Server: Blank
MMSC: http://mms.msg.engli....com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS Protocol: WAP 2.0 (if you have this)
MCC: 310
MNC: 260
APN Type: default,supl,mms
but still same problem, it shows e in the tip of my icons for edge but no access to market or browser still

Aktive 3G Connection but no Internet How to fix?

Hey all.
I'm having a problem with Internet now, just got my sim card up and working, had to reinstall different rom to fix it.
BUT now I can't get Internet to work over 3G
I'm using AT&T and pay as u go.
I got a 3G/h up in the corner but internet still doesn't work.
Anybody have suggestions how to fix?
Name: ATT
APN: wap.cingular
Proxy: Not Set
Username: [email protected]
Password: Cingular1
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: 2.0
MCC: 310
MNC: 410
Authentication Type: not set
APN Type: Not Set
This may seem a little simplistic, but I've made this mistake myself with previous phones..
Auto select network mode and auto select network operator.
Previously whilst abroad I had set to specify a certain network and therefore when I got home and switched phone on it could not would not connect till I remembered what I'd done.
Hope it helps and your Phone is fine!
Didn't work
Now I have 3G sign but no Internet

[Q] Newbie Fail, Renable 4g and network data?

I think I accidentally disabled network data when looking at network toggles the other night at home, on wifi. I just had received my phone, and didn't know what the toggle did (no labels). After all of that, I installed Launcher Pro, the least buggy , and now I have no 4g. I can't find the original widget that "disabled" my network data and can't figure out how to reset.
The steps I've taken:
> Confirmed i can call out
> confirmed internet connection down
> Reset APN to default settings on APN menu, shows at&t
> confirmed packet data checkbox is selected.
I show Network bars, but no 4g or 3g emblem. What is my next step to fix this and reconnect to data?
worse case, just use oden and flash back to stock......that should fix the issue. or try and add the APN manually.
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
I should clarify that I'm completely stock right now, no root or anything. I'm giving myself a little time to acclimate to Android before I go that route despite my newbie developer urges.
the2rrell said:
worse case, just use oden and flash back to stock......that should fix the issue. or try and add the APN manually.
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]ULARGPRS.COM
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: leave blank
Click to expand...
Click to collapse
That's the old style APN that will only get you HSPA. No LTE with this APN.
My about phone status shows:
Network: AT&T
Signal Strength: -18 dMb
Mobile network type: Unknown
Mobile Network state: disconnected
I swear it has to be something I did with that toggle. How can I get this reset?
can an admin move this to general where it would get more exposure. I guess it's actually more Android OS related than phone specific and not enough people in this subforum to get an answer. I'd like my phone operable again
Verified APN for AT&T shows up. Got WIFI access and redownloaded the toggle from Go Launcher. Verified APN toggle highlighted. Still only show cell connection bars, with no 4g or 3g emblem or internet access on the mobile network. I haven't even tweaked the phone that much!
Never mind. AT&T said the data plan failed to setup, so I guess it wasn't my fault after all.

Helpfull APN info for people using Verizon S4's on AT&T

I have recently taken my Verizon Galaxy S4 and put it on the AT&T network (Prepaid $60 a month plan) and after hours of reading these forums and trying apn settings posted I found some information via Google that might prove useful to those of you that wish to do the same.
Before I start, I am getting HSPA+ speeds of around 12MBps, I have full working data, text, calls, and MMS. At the moment I haven't been able to get the tethering to work, wifi or otherwise.. says number not found. I assume that means its checking to see if its available for a plan that allows it via AT&T.
APN settings I used are as follows.
Name: ATT HSPA+
APN: phone
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Leave in Blank>
APN type: default,supl,mms,hipri
APN Protocol: Leave it to the Default one
Bearer: leave it to the Default one
For those of you unfamiliar with how to change the APN settings: apn settings for Android - For Android, you should go to Settings > Wireless Connections > More > Mobile Networks > Access Point Names.
Its fairly straight forward. Make sure that once your finished adding the apn info you hit your menu key and save, then back out and select the apn you want to use.
APN setting source: http://apn-settings.com/us/att-apn-settings/
There are a couple video's on that site as well if you need a walk through.
I take no credit for the video's or the website, I am only relaying some useful information that I had trouble finding.
Hope this helps.
Curious if you have tried to tether and if it works? I was able to get T-Mobile prepay working on the S4. The only issue was that I couldn't get around the tether upsell page. I read everything. Thanks
BadToThePhone said:
Curious if you have tried to tether and if it works? I was able to get T-Mobile prepay working on the S4. The only issue was that I couldn't get around the tether upsell page. I read everything. Thanks
Click to expand...
Click to collapse
No, I couldn't get the tethering to work.. I'm using all the stock stuff on my S4 at the moment but once I flash something I'll play with it some more.. But as it stands so far that is all I have found that doesn't work.

[ANSWER / FIX] How to get MMS working on AT&T Go Phone SIM, and Signal Messanger

Hello!
I have found out a way to allow MMS messages to work on AT&T Go Phone Plans.
I have seen many posts regarding this issue, and many people seem to still have an issue even after it is marked resolved in the github threads.
Here is how i fixed it for my device :
**Device Used**
Huawei Honor 5X
Android 7.1.1 Lineage OS Nightly
KIW-L24
AT&T Prepaid Go Phone SIM
**Steps**
First, if you are using a custom ROM, or even the stock Huawei ROM, It is likely you need to configure your APN settings.
You may have APN's that downloaded automatically, or you can create a new one if none are there.
Here are the things you need to make sure are set in Settings > Data > Cellular Networks > Access Point Names:
Name: ATT Nextgenphone
APN: nxtgenphone
Proxy: none
Port: none
Username: none
Password: none
Server: none
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: none
APN: default,mms,supl,nota,hipri
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4/IPv6
Bearer: Unspecified
MVNO Type: None
Next we need to configure some settings for Signal:
**SMS**
SMS Enabled
"Wifi Calling" Compatibility mode: ON
**Chats and Media**
When using Mobile Data: Images, Audio, Video
When using Wifi: "Images, Audio, Video"
**Reboot your phone and attempt to download an MMS Message**
You should now be able to use your AT&T Go Phone SIM and Signal with both other Signal Users and unencrypted with Non-Signal users!
thanks
the only changed that was required on my side (straight talk on at&t) was to change the MVNO and Bearer to none/unspecified.
I managed to get this working after reverting back to stock and then realizing the difference in default values for MVNO and Bearer. Would have saved me time if only I saw your post 2 days before I found the solution myself. +1
link
itsbentheboy said:
Hello!
I have found out a way to allow MMS messages to work on AT&T Go Phone Plans.
I have seen many posts regarding this issue, and many people seem to still have an issue even after it is marked resolved in the github threads.
Here is how i fixed it for my device :
**Device Used**
Huawei Honor 5X
Android 7.1.1 Lineage OS Nightly
KIW-L24
AT&T Prepaid Go Phone SIM
**Steps**
First, if you are using a custom ROM, or even the stock Huawei ROM, It is likely you need to configure your APN settings.
You may have APN's that downloaded automatically, or you can create a new one if none are there.
Here are the things you need to make sure are set in Settings > Data > Cellular Networks > Access Point Names:
Name: ATT Nextgenphone
APN: nxtgenphone
Proxy: none
Port: none
Username: none
Password: none
Server: none
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: none
APN: default,mms,supl,nota,hipri
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4/IPv6
Bearer: Unspecified
MVNO Type: None
Next we need to configure some settings for Signal:
**SMS**
SMS Enabled
"Wifi Calling" Compatibility mode: ON
**Chats and Media**
When using Mobile Data: Images, Audio, Video
When using Wifi: "Images, Audio, Video"
**Reboot your phone and attempt to download an MMS Message**
You should now be able to use your AT&T Go Phone SIM and Signal with both other Signal Users and unencrypted with Non-Signal users!
Click to expand...
Click to collapse

Categories

Resources