Well, the Electrify bootloader cannot be unlocked with the Pudding File. Since the 2.3.5 update, some how it locked us all out. Hopefully someone can figure a way out to unlock this, as Pudding has created a new file, but has no replied to anyone in weeks about it now. When we try and use the new file, it gives us the following error in RSD Lite...
It starts to flash get to code group 47, then resets phone. Phone gives error 115:1:2 Failed to boot 0x2007 and reboots again. RSD gives error flashing to BP Passthrough, then gives a Failed status this this info:
Failed flashing process Interface AP-OS: Error flashing subscriber unit Device API Error: 0xE003009 Address:0080070 Command: ADDR C0xE0231009:
Any idea how to fix or patch, would be much appreciated even if you guys can't fix it, any sort of advice in the correct direction would be much appreciated as I have been tinkering and reading on this for hours & days now...
Related
Bought streak with 1.5 firmware from local craigslist. Tried follow upgrade instructions but unable to put phone in fastboot mode with camera + power option. That gives me white screen with 20+ testing options, no fastboot option there.
Also tried QDL option, Getting following error on run:
Send Security mode success
ERROR[DP1]: Partition table differs, override will be accepted!
ERROR: Download fail!
Please remove the battery and try again.
Wait for modem set up ......
Download Fail! - 2011/01/19 02:25:54
Is there a method to update to latest firmware? Help is appreciated.
Thanks
do you still have the dell streak
Why did you revive a nearly year-old thread to ask that? PM him next time.
For the record, since the OP apparently never got an answer to his question, he has an engineering Streak. Can't install StreakMod on it and can't upgrade it unless wanting to brick it. The only value is in the Engineering ROM.
i just got my warranty replace atrix and i was trying to unlock it with the guides on here. i did it correctly last summer but for some reason the phone didnt take the fix too well. now rsd lite is saying error code unable to retrieve interface handle and says theres no os. what can i do to fix this? thanks in advance
Hey everybody,
Today I decided that my Maxx (eu, germany) was to slugish so I gave it a in - OS wipe and reset. But unfortunately my razr (xt912) refused to boot up again, just kept hanging in the 'upgrading android' for several hours. So than decided to download myself some fastboot files and start from scratch. Unfortunately themmost logical candidates of the fastboot files keep on returning the following error on RSD: Failed flashing process. Failed flashing process. 6/21 flash CDT.bin "cdt.bin_signed" --> Phone returned fail ; phone connected.
Getting a bit desperate here. Hope you guys can help me with this.
Cheers.
madlive said:
Hey everybody,
Today I decided that my Maxx (eu, germany) was to slugish so I gave it a in - OS wipe and reset. But unfortunately my razr (xt912) refused to boot up again, just kept hanging in the 'upgrading android' for several hours. So than decided to download myself some fastboot files and start from scratch. Unfortunately themmost logical candidates of the fastboot files keep on returning the following error on RSD: Failed flashing process. Failed flashing process. 6/21 flash CDT.bin "cdt.bin_signed" --> Phone returned fail ; phone connected.
Getting a bit desperate here. Hope you guys can help me with this.
Cheers.
Click to expand...
Click to collapse
Isn't the European version xt910? IS yours really a 912? That would imply a North American variant. You could always throw an email to Motorola support with the IMEI asking for the phones origins...I did this and they confirmed mine was a Hong Kong variant.
I think you might be right. Its a German Razr Maxx. ( I know for certain its' German because it has germany specific apps on it). But would anyone know what the error means?
Fortunately I do can get in fastboot. Yesterday managed to get into android and the setup wizard but after the setup wizard I never get my launcher screen. The phone doesn't lock up just shows a black screen.
AW: Motorola RAZR maxx, bricked?
Hit the link in my signature, there you'll find the ICS Fastboots (Firmwarelist) and RSD-How to in German.
Sent from my XT910
SO, i followed a guide the other day to get lollipop on my wind huawei mate 2.
but now i want to switch back to the original android that came with the phone because i want to unlock the phone, and the lollipop one on the guide i followed doesnt show the unlock code entry screen when i put in a different sim card.
the issue i am having?
when i flash the stock recovery file that i found on here, that boots fine, then when i try to install B128 wind firmware, it says a bunch of error codes along the size of
oemsbl write failed something or other then it also said update_vendor.app install failed - invalid package
i'm hoping someone can help me because my phone will not go past the huawei logo at this point.
i do have access to fastboot mode though thank god.
if anyone can help me with the proper files to download and such that would be great!
mikeogden1981 said:
SO, i followed a guide the other day to get lollipop on my wind huawei mate 2.
but now i want to switch back to the original android that came with the phone because i want to unlock the phone, and the lollipop one on the guide i followed doesnt show the unlock code entry screen when i put in a different sim card.
the issue i am having?
when i flash the stock recovery file that i found on here, that boots fine, then when i try to install B128 wind firmware, it says a bunch of error codes along the size of
oemsbl write failed something or other then it also said update_vendor.app install failed - invalid package
i'm hoping someone can help me because my phone will not go past the huawei logo at this point.
i do have access to fastboot mode though thank god.
if anyone can help me with the proper files to download and such that would be great!
Click to expand...
Click to collapse
With NO stock backup i doubt it.
Hello
Anyone ever seen this when trying to unlock the Note 9 Pro (Joy)?
Im in Fastboot - and the device looks like it's just going to unlock but at 99% of the counter I get the Remote: Token verify failed, reboot device error, the fastboot teddy thing flashes for a second and then back into Fastboot.
Anyone seen that before?
A
PS:- Just thought, when I started the unlock process a week ago I was running 11.0.3 and then I installed the 11.0.4 firmware....would that make a difference?
Just in case this happens to anyone else - the issue I was having was caused by using a different version of fastboot.exe other than the one that came with the unlock tool.
My bad