HI THERE EVERYONE!!! ive been a symbian user for years, but when i change to android got inlove with it. im currntly on WB voo8.1 2.2, have no problem with it flashing and rooting it. now im so exited for the GB update, i already download all files needed for WB tweak. after that of course i change to v8 to GB (tried it) installed thru xrecovery and followed steps in flashing 2.3
but when i rebooted after flashing my x10 stayed at the boot logo of sony ericssons. made me sad.......
can anyone pls help me with this tried posting at WB thread but since im a new user it said that i can post there. can sum1 pls help me here or any1 here from the same country.. im from the philippines. pls guys help me..
hve u flashed ftf file from flashtool...???
Ok here u are
Now go to xrecovery and do following steps
wipe user data full wipe
wipe cache partition
wipe cache
wipe dalvim cache
flash the rom
if now u get stuck on boot logo, just go to xrecovery wipe.cache and dalvik cache and the problem will gone.
Send from my own MIUI Final by Oskar.K X10 .
re. help pls..
yes i did that.
1. backup using xrecovery
2.did the following in xRecovery
-Factory Reset
-Wipe Cache Partition
-Format Cache
-Wipe Dalvik Cache
3.install WB gb zip
4.remove battery then put it back for a while
5.flashed ftf file using flashtool
6.reboot then stuckedddd.
do i need to download a newer flash tool? the one that i currently use is the that i use flashing baseband needed for WB v8.
ok ill give it a go again hehehe. im currently on 2.1.b do you guys think its an issue? and another one im using openvpn for my internet and subscribe locally at our local site here at my country. do you think that my tun.ko would work? badly need internet at my work and at home internet providers at our place sucks by the way because our place its not that develop when it comes to tlephone and internet.
knive13 said:
yes i did that.
1. backup using xrecovery
2.did the following in xRecovery
-Factory Reset
-Wipe Cache Partition
-Format Cache
-Wipe Dalvik Cache
3.install WB gb zip
4.remove battery then put it back for a while
5.flashed ftf file using flashtool
6.reboot then stuckedddd.
do i need to download a newer flash tool? the one that i currently use is the that i use flashing baseband needed for WB v8.
Click to expand...
Click to collapse
no dude u need latest BB .71 its in the WB ROM's thread.
yeAah i have it too followed the steps installed wiped needed things to be wiped then inatall custom WB zip,i didnt reboot then removed battery for a while then flashed ftf file on WB thread after flashing turn on phone then stucked at SE logo.
ill try to repeat the steps again hope fully i wont get the same result.. thanks to you guys. ill update u guys once i made it work. again lots of thanks to you guys its well aprreciated.. =)=)
So i managed to solve the problem that i had.
When i said that i could flash only the stock one, i was flashing XXKI3 as one file after each failed attempt to flash a custom one.
So i tried and flashed another stock rom, again as 1 file. after the flash was done the phone again stucked at first screen wit the triangle.
After that i thought that something was really messed up in the phone and flashed again XXKI3 with PIT and multiple files and offcourse RE-Partition.
After that flash a stock rom with 1 file and modified bootloader from Intratech's thread, this way you can also reset the binary caunter with a jig (can find many on ebay).
After finish flashing and first boot
root with CF kernel and flash any custom rom. It worked as it should. Now i am on a custom rom and trying to see which one suits me best.
Thank Jiganet for some may be needed modified bootloader which is recommended so you can reset binary counter.
Everyone tha nk you for your suggestions and help.
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
The first boot takes some time. Are you waiting that long?
mariosraptor said:
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
Click to expand...
Click to collapse
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
yes. more than 10 minutes.
kanefox said:
The first boot takes some time. Are you waiting that long?
Click to expand...
Click to collapse
i am not getting any bootloops. it just gets stucked at the first screen with the triangle.
i have no experience in samsung but i have done all that you mention.
still no luck. i will try once more and let you know in about 20 minutes.
thanks for your help.
rembrandtlnx said:
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
Click to expand...
Click to collapse
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
mine is an unbranded i9100 from Greece. i am flashing the correct roms.
rembrandtlnx said:
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
Click to expand...
Click to collapse
the same. more than 15 minutes of waiting time. flashing stock again.
Im sorry cant rly help you then, let's wait for some more experienced user answer
thanks. no worries. stock is good. matter of speaking
rembrandtlnx said:
Im sorry cant rly help you then, let's wait for some more experienced user answer
Click to expand...
Click to collapse
next time when u flash try formatting system.
In CWM >mounts and storage> format system
Please state detailed steps you did when flashing a ROM and what kind of ROM.. That will help alot on trouble shooting your problem.
Sent from my GT-I9100 using xda premium
every body read first post managed to solve this.
Hi was there a solution to this problem as I seem to get it with EVERY rom I try to install from zip?
Hi to all, this is my first Post and this is my First Android I come from an iPhone 2G, iPhone 3g, iPhone 3GS and my last phone was an iPhone 4!!! now I'm extremely happy with my new SGS2!!!
I have been searching a lot!!! for a solution for this flash loop issue,
1 - I have flash to a stock 2.3.5 KI3 samfirmware,
2- then I have Odin>PDA>cf-root-KI3-4.2.tar to root my phone.
3 - After that I downloaded 3 custom roms, DarkyROM2_KI3, VillainROM-3.0.0-signed and Cyanogen cm_galaxys2_full-112. put them on my root internal sdcard.
4 - booted to ClockworkMod Recovery menu.
5 - Wipe Data/Factory Reset
6 - Wipe Partition Cache.
7 - Install Zip from sdcard.
and every thing seems ok, but when i restart, it stays on the boot loop, even if i manage to enter to CWM Recovery menu it says that E: Can't Mount ... bla bla bla
I had been trying to put a custom rom so much that my binary counter is now on 10
I'm going to try what you wrote on the first post!
Restore to stock KI3 firmware using pit file and repartition.
after that install the cf-root kernel. Restart and try to install any custom firmware.
Hope it works
Not it did not work, Maybe the problem was Wipe Partition cache after installing new rom, going to stock and repeating
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Another try another fail!
I have no idea on what else can I do!!! tried again and nothing! I tied cf-root 4.1 and nothing and cf-root 4.2 and nothing!.
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Click to expand...
Click to collapse
After i got the stuck on boot! I can restore to stock by only using the PDA, I don't need to set the pit file again!, but I'm usign all the files on Odin to see If that makes any difference but nothing!!!
I wonder how mariosraptor did it!!!! Can you throw us a light???
I have explained it on first post. Just follow step by step the first post directions.
Sent from my GT-I9100 using xda premium
Nope it didn't work
The steps I did:
1. Restore to stock using PIT, PDA, PHONE, CSC.
2. After it boots root the phone with cf root 4.1 for ki3
3. Use CWM Recovery to flash the new rom on internal sdcard.
I have been doing it with wipe data, wipe cache, wipe develk.
Nothing is there a step that im missing?
Thanks
SOLVED!!!!!! JAJAJA
The only problem, was one minor thing, a little thing called Bootloader!
I installed the old bootloader!
find it here: http://forum.xda-developers.com/showthread.php?t=1075278
And after that every thing worked perfectly, no boot loops!!!!
Hope it helps!!!
Hi all,
Here are my problem:
My X10a first running a 2.1 stock AT&T rom. Then i decide to flash the generic 2.3 rom (forgot which rom i had flashed ). And my nightmare begin. After flashing successful (at least the x10flashtool say so) i reboot my phone and the phone keep rebooting forever until it run out of battery . Sometime it can process to the home screen but will reboot after 10-20 second. I hear some of my friend said that some guru in this forum has found a way to fix this problem. Is this true, can you show me the method ?
*Sorry for my bad english*
A billion thanks :X
no one here
there a forum for your device
in recovery wipe data and dalvik cache should stop it
reflash and wipe again if it doesnt work or finally
but you need to use flash tool
owenoliver1 said:
there a forum for your device
in recovery wipe data and dalvik cache should stop it
reflash and wipe again if it doesnt work or finally
but you need to use flash tool
Click to expand...
Click to collapse
can you give me more details about the wipe things ?
Wipe data and dalvik > reflash the rom > wipe data and dalvik again > device will work normally ?
help me please =.=
need help
HI .. I TRY TO INSTALL MIUI ..
1) flash by odin xxkk5
2) flash cf root
3) poot to sdcard the miui zip file
4) i do full wipe and install the zip
when my SGS2 turn on he stuck and do reboot , stuck and do reboot ..
Problem !.
Try flashing the rom a second time.
Sent from my GT-I9100 using Tapatalk
Have you done this prior to installation?
Wipe Data
Wipe Cache
Wipe System
Wipe Dalvik Cache
then install ROM...twice if first failed.
If there's still a problem, redownload the ROM.
Flashing stock Samsung ROM is still flashing a different ROM, you're not going back to the real stock as you are still running a ROM, in this case Samsung's ROM.
View attachment SuperWipe_SGS2.zip
flash that in recovery first to wipe eveything then flash the rom and wipe dalvik then reboot and let it sit for 5 - 10 min then reboot again
Hi guys,
I downloaded 4.0.4 for P7500 and flashed using ODIN 3.0.9 & 3.12.1 but after successful flashing ,it just keeps d screen in bootloading.. No boot loop , no hanging.. What is wrong..? What should i do..?
please help me..
I downgraded from 7.1.2 to 5.0 AOSP then touchwiz 4.0.4.. should i follow any particular steps..?
Regards
Wipe factory reset,cache ,dalvik cache and int.Sdcard.
Reboot into Download mode.
Start Odin 3.07 or 3.09
Put your downloaded Stockrom und AP or PDA and press Start.
Reboot take some min. 10 to 20.
But i not unterstand why you are go back to Stock 4.04 ?
bierma32 said:
Wipe factory reset,cache ,dalvik cache and int.Sdcard.
Reboot into Download mode.
Start Odin 3.07 or 3.09
Put your downloaded Stockrom und AP or PDA and press Start.
Reboot take some min. 10 to 20.
But i not unterstand why you are go back to Stock 4.04 ?
Click to expand...
Click to collapse
I did all the above but stuck in booting logo for more than an hour.. Tried more than 5times but no luck.. What to do..?
Do you have modem file.? Flashing modem ll help.?
Planning to give t to my sister so only going back to stock..
For what you need the Modem.IMG.
If you wipe your Tab , isn' t touch the the modem.
Install a TWRP 2.8.7.0 with Odin. Boot into Recovery and wipe system, cache , cache dalvik and the internal Sdcard.
Boot directly into the download mode and flash Stock Firmware.
But when i want to give the Tab to my Sister, than i install the newest ROM , this up to date with all latest security Patches.
If you need the Modem.img than must you download a 4 Part ROM.
Edit:
Try at first to boot into the Stock Recovery and make a factory reset.
Thanks
bierma32 said:
For what you need the Modem.IMG.
If you wipe your Tab , isn' t touch the the modem.
Install a TWRP 2.8.7.0 with Odin. Boot into Recovery and wipe system, cache , cache dalvik and the internal Sdcard.
Boot directly into the download mode and flash Stock Firmware.
But when i want to give the Tab to my Sister, than i install the newest ROM , this up to date with all latest security Patches.
If you need the Modem.img than must you download a 4 Part ROM.
Edit:
Try at first to boot into the Stock Recovery and make a factory reset.
Click to expand...
Click to collapse
Thanks bro, it worked..:good: