[Q] Can't boot into recovery mode - Optimus One, P500, V General

I just got my P500 back from warranty after I hard bricked it a few weeks before (KDZ crashed during flashing). They replaced the whole PCB.
Now I wanted to install the Clockwork Mod again and so I downgraded to Android 2.2 (they sent it back with 2.3.3), rooted it, installed ROM Manager and CWM. But if I want to boot into recovery mode I get the recovery mode unpacking-logo (not the warning sign, it's the logo with the arrow indicating something's installing) and after a few seconds the screen turns black and the device boots the normal ROM with factory settings.
I also tried that on 2.3.3 with the same result and I just don't know what I should do to get into recovery mode :/
I downgraded the OS because of the baseband (I want to use CM7) and I rooted it with SuperOneClick using the GingerBreak exploit.

Reflash recovery because your recovery not flashed properly.don't use rom manager to flash recovery use another method like lgmdp or terminal or adb.

lgmdp worked like a charm, thank you!

Related

[Q] Recovery issue

i went from cm7 back to stock with odin. i used the one click root to root the phone. now when i go into the stock recovery and choose ‘Reinstall Packages’... it says that it updated but will never actually go into recovery. it just reboots the phone and the phone starts up fully. if i try to flash a rom with rom manager, same issue... it will just go to the stock recovery screen and if i choose ‘Reinstall Packages’, i just boots up like it was restarted.
any help much apreciated!
update: im showing stock 2e recover not 3e so this didnt work.

[Q] My phone dead (fastboot stuck)

Please quickly
my phone is lg optimus me
I rooted it
then I downloaded ROM Manager I clicked on backup CURRENT ROM then the phone rebooted to the recovery mode black screen
fastboot was started
udc_start()
then Now please how to fix it any method formatting recovery flashing any method please
and then why the ROM manager did that
?
try this
seems you did not installed any custom recovery, as TWRP or CWM, only this can do a nadroid-back up of your phone
but can you reboot it, even pulling out and in battery? if yes try to install the right custom recovery for your phone
backing up with ROM manager only create a short cut to the installed recovery and from then you can make a back-up, so if it's not installed the phone stuck
IDK with your phone but follow exactly the guide to rooting
Thnx man i reflashed my fw and then it works good
Sent from my LG-P350 using XDA App

[Q] Trouble Flashing CWM Recovery [YP-G70]

Hey guys -
I'm having trouble getting CWM Recovery to work with my YP-G70. I've rooted, installed ROM Manager, wiped data and partitions, installed Odin, Used Odin to (supposedly) flash the DD_01142012.tar recovery to the device. Everything looks successful, but when booting back up ROM manager only gives me the option to go to "recovery setup" instead of the normal flash option. Even when I reboot it in recovery, it just goes to the standard android recovery screen. Any ideas on how to fix this? It may be painfully obvious, this is my first root.
Hydraulix_93 said:
Hey guys -
I'm having trouble getting CWM Recovery to work with my YP-G70. I've rooted, installed ROM Manager, wiped data and partitions, installed Odin, Used Odin to (supposedly) flash the DD_01142012.tar recovery to the device. Everything looks successful, but when booting back up ROM manager only gives me the option to go to "recovery setup" instead of the normal flash option. Even when I reboot it in recovery, it just goes to the standard android recovery screen. Any ideas on how to fix this? It may be painfully obvious, this is my first root.
Click to expand...
Click to collapse
Rom Manager does not work for this device ( I think ) and you should not use it. "DD_01142012.tar" is not just a recovery, it's the kernel too. They are integrated. Flash it again and hold power and vol-up during boot up to get to recovery then flash your rom...

[Q]

hellow guys !
recently i flashed some roms on my GT-S6310....no problem whit them....everthing worked perfectly (just to compare them)
so.... i flashed a stock rom on my phone to apply a theme....everything went good....how i expected my custom recovery image was replaced whit the stock one ....... so far so good....but when i try to flash via Odin the same CWM it show me "pass" but when i boot into recovery it appear the stock one
in that way i tried a milion of methods to flash the custom one but they wasn't work
even the "root" didn't worked :crying:
now i'm stack into the stock rom , whitout any way to escape
please guys help me to understand why it happened , and how to resolve it
stefan254235435235411354 said:
hellow guys !
recently i flashed some roms on my GT-S6310....no problem whit them....everthing worked perfectly (just to compare them)
so.... i flashed a stock rom on my phone to apply a theme....everything went good....how i expected my custom recovery image was replaced whit the stock one ....... so far so good....but when i try to flash via Odin the same CWM it show me "pass" but when i boot into recovery it appear the stock one
in that way i tried a milion of methods to flash the custom one but they wasn't work
even the "root" didn't worked :crying:
now i'm stack into the stock rom , whitout any way to escape
please guys help me to understand why it happened , and how to resolve it
Click to expand...
Click to collapse
Don't let it auto reboot after the recovery flashes. Either uncheck auto reboot or just hit the combo for recovery when the phone reboots. Many newer Samsung phones have a script that reinstalls the original recovery if it realizes that you have changed it. You have to install another rom or root it and remove the script and reflash the recovery and it'll stick if you just want stock rooted.
es0tericcha0s said:
Don't let it auto reboot after the recovery flashes. Either uncheck auto reboot or just hit the combo for recovery when the phone reboots. Many newer Samsung phones have a script that reinstalls the original recovery if it realizes that you have changed it. You have to install another rom or root it and remove the script and reflash the recovery and it'll stick if you just want stock rooted.
Click to expand...
Click to collapse
didn't worked...... after i flash the recovery (i'm in download mode) i boot directly into recovery.... the same problem
try to instal the recovery via rom manager.....seems to work.....but when i want to boot from rom manager into recovery it show me an error ("an error occurred while attempting to run privileged commands !" )
what should i do now ?
http://galaxyyoungs6312.blogspot.com/2014/01/clockworkmod-recovery-for-galaxy-young.html
6310 + 6312 use the same recovery.
yeah....but i tried that rooting method and it didn't work....
maybe i can flash a new rom from ADB but i can't pass the signature verification
any ideas ?
Well I can tell from your pictures that you didn't follow the suggestion of trying SuperSU, but that might not help anyway. That Framaroot version is an older one. Get the updated version from here: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276 and use SuperSU instead of Superuser. Sometimes you have to run it a couple times before it'll go through. Reboot in between tries. Here are better instructions for the rest of the process:
http://forum.xda-developers.com/showthread.php?t=2460029
man ...didn;t work... ... tried at least 5 times .....
or....i can flash a rom from ADB but i can't pass the signature verification....
a have an ideea ....maybe i can flash via odin a rom whit a custom recovery ...from there i can flash an old backup of mine .....it's good to proceed right that ?

[Q] Custom Recovery problem (Rom manager-cwm)

im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
scarface195894 said:
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
Click to expand...
Click to collapse
Pull battery let it sit for two minutes. Push menu button, volume down button, and power button at the same time boot into download mode. once there flash a fresh copy of your OS which ever version of KitKat your running. You lose all your personal data, but your beyond that now. Then here is link to my thread should answer all your questions http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 enjoy !!!
uknow said:
Yeah ive said it a few times this should not be used
If youve bricked your phone you can get back into your phone by holding volume down menu botton and power botton at the same time when it pops up the warning screen to enter download mode hit cancel your phone will then boot up after your phone is on if you do not have a computer the way you fix the phone so you dont have to do this every time your phone is off you need mobile odin and a kitkat cwm.img.tar for our phone flash it and problem solved you can now boot into cwm recovery then if you want you can flash a twrp img zip through cwm or just keep cwm hope this helps
Ps if you Google mobile odin the dev gives it away on his xda mobile odin page
Click to expand...
Click to collapse
.............^^^^^^...........
stuck in recovery loop also
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
update-- i found an updated version of the philz tar file and installed it with odin and that got me out of the loop..just havent tried to get back into recovery yet...lol
Cat1970 said:
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
Click to expand...
Click to collapse
First, pull the battery for a minute then reinstall hold the power, menu, and volume down buttons at the same time and boot into download mode. The version of Phil'z CWM you flashed is to old for 4.4.4 NK4. Now download to your desktop the right Philz CWM recovery file (Phil'z_Touch_6.48.4-hlte.tar.md5 ) here is the link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/hlte/ there are two listed use the second one. Flash with odin and you should be good to go. Go to my thread http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 for more info.
done exactly as you said and the same screen came up saying recovery is not seandroid enforcing and then it jumps to Philz Touch 6 so im assuming everything is right now...i really appreciate the help! tyvm
different rom
ok..i installed cyanogen rom..i also used titanium backup..i want to go back to where i was but i dont see titanium backup on there anymore..how do i revert back?
i guess i need to update my phone n900p (help)
my rooted note 3 was running 5.0 L so i tried flashing a custom recovery both TWR and CWM now its stuck in boot loop. i read all the post showing you how to get out the bootloop. how ever i still need to put a recovery on my phone are there any updated links for this with odin because i was using the odin 3.0 sorry odin 307

Categories

Resources