hellow guys !
recently i flashed some roms on my GT-S6310....no problem whit them....everthing worked perfectly (just to compare them)
so.... i flashed a stock rom on my phone to apply a theme....everything went good....how i expected my custom recovery image was replaced whit the stock one ....... so far so good....but when i try to flash via Odin the same CWM it show me "pass" but when i boot into recovery it appear the stock one
in that way i tried a milion of methods to flash the custom one but they wasn't work
even the "root" didn't worked :crying:
now i'm stack into the stock rom , whitout any way to escape
please guys help me to understand why it happened , and how to resolve it
stefan254235435235411354 said:
hellow guys !
recently i flashed some roms on my GT-S6310....no problem whit them....everthing worked perfectly (just to compare them)
so.... i flashed a stock rom on my phone to apply a theme....everything went good....how i expected my custom recovery image was replaced whit the stock one ....... so far so good....but when i try to flash via Odin the same CWM it show me "pass" but when i boot into recovery it appear the stock one
in that way i tried a milion of methods to flash the custom one but they wasn't work
even the "root" didn't worked :crying:
now i'm stack into the stock rom , whitout any way to escape
please guys help me to understand why it happened , and how to resolve it
Click to expand...
Click to collapse
Don't let it auto reboot after the recovery flashes. Either uncheck auto reboot or just hit the combo for recovery when the phone reboots. Many newer Samsung phones have a script that reinstalls the original recovery if it realizes that you have changed it. You have to install another rom or root it and remove the script and reflash the recovery and it'll stick if you just want stock rooted.
es0tericcha0s said:
Don't let it auto reboot after the recovery flashes. Either uncheck auto reboot or just hit the combo for recovery when the phone reboots. Many newer Samsung phones have a script that reinstalls the original recovery if it realizes that you have changed it. You have to install another rom or root it and remove the script and reflash the recovery and it'll stick if you just want stock rooted.
Click to expand...
Click to collapse
didn't worked...... after i flash the recovery (i'm in download mode) i boot directly into recovery.... the same problem
try to instal the recovery via rom manager.....seems to work.....but when i want to boot from rom manager into recovery it show me an error ("an error occurred while attempting to run privileged commands !" )
what should i do now ?
http://galaxyyoungs6312.blogspot.com/2014/01/clockworkmod-recovery-for-galaxy-young.html
6310 + 6312 use the same recovery.
yeah....but i tried that rooting method and it didn't work....
maybe i can flash a new rom from ADB but i can't pass the signature verification
any ideas ?
Well I can tell from your pictures that you didn't follow the suggestion of trying SuperSU, but that might not help anyway. That Framaroot version is an older one. Get the updated version from here: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276 and use SuperSU instead of Superuser. Sometimes you have to run it a couple times before it'll go through. Reboot in between tries. Here are better instructions for the rest of the process:
http://forum.xda-developers.com/showthread.php?t=2460029
man ...didn;t work... ... tried at least 5 times .....
or....i can flash a rom from ADB but i can't pass the signature verification....
a have an ideea ....maybe i can flash via odin a rom whit a custom recovery ...from there i can flash an old backup of mine .....it's good to proceed right that ?
Related
Hi,
Due to HTC's special touches, the recovery image doesnt stay flashed, and on normal boot its flashed over (meaning if i try to go to recovery after a normal boot, i get the red triangle stuff, and have to pull the battery). I was wondering if this would potentially cause troubles if i was trying to flash a custom ROM from recovery? in other notes, i do find sometimes i have to pull the battery 4 or 5 times to get it to normally boot (thats without holding the buttons >.>).
Thanks in advance.
HTC HERO recovery image flashing problems
I am having exactly the same problem!
I did a quite a bit of research on how to root, backup and flash my HERO and every guide I found describes the process using Universal AndRoot + Rom Manager and it seems there should be no problems. I already rooted my phone successfully, installed Rom Manager and flashed either ClockworkMod 2.5.0.1 or RA Recovery 1.7.0.1 which are able to boot but only once. The next time I reboot I get the red triangle warning and it loads into stock recovery (by pressing vol_up + powroff buttons), so the custom recovery lasts only one boot cycle. I was able to backup but I don't want to risk to wipe and flash since there is a chance it might stuck in the bootscreen loop afterwards and I won't be able to do anything.
There is a thing with s-off and SPrecovery which helps to resolve the problem but it doesn't look like there is anything for HERO.
Any help would be appreciated.
ps I tried to manually flash recovery from inside the phone and from windows command line with the same result.
forum.cyanogenmod.com/topic/8182-how-to-root-your-hero
posted some similar comments over there, and the only init script that i can find when in recovery.
Yeah I posted my question there too.
I was able to find some information about the issue (he is talking about Villain ROM but I think it doesn't really matter):
pulser_g2:
Repeat the process again, as I think stock ROMs try and overwrite the recovery each time they boot. When you finish the process, immediately nandroid and flash VR12. That will then flash a new recovery, AmonRA 1.6.2a, and you will be sorted
Click to expand...
Click to collapse
So it looks like we should just go ahead and flash a custom rom which, in theory, will eliminate the problem.
yeah was tempted to just flash, but sending duck my system img for him to dissect anyway.
yeah worked fine, running cm6.1 now
Yeah once you root you have to flash a custom rom before reboot or u loose the root
I learnt it after lots of reboots and re roots.
but now I wanted to know if I could save the original rom which i have as nand backup to make as an update.zip like custom rom for safe keepimg
I flashed CM6.1 -based TastyFroyo 1.2 and I can confirm custom recovery stays flashed now.
when i tried to flash a custom rom.....firmware failed and now i cant reboot my device....i can just bring it in download mode....i cant bring it to cwm recovery mode......when i m tryin to reboot device the screen starts and says firmware upgrade encourted an error...tyr recovery mode in kied and try again..........what happedned ......i have rooted device.....inhad flashed roms many times...but this happened to me first time.....did i brick my phone .....can be recovered back?please guide me urgent......
You should flash back to stock ROM for testing.
Make sure your phone working well with stock ROM, then make everything again for custum ROM (Root, flash CWM Recovery, ....)
Hi I have rooted my UK i9100 with odin and successfully installed resurrection remix previously. When trying to flash an updated version I stupidly forgot to factory wipe and now my phone wont boot, it gets stuck on the rom boot screen and i cant get into cwm.
I can get into download mode and from there have tried flashing another rom via odin (litening rom) to see if that would boot to get me into cwm but that freezes on the boot screen also. I tried to use Galaxys2recovery as shown on zedomax youtube channel but then realised that is done from gingerbread only. I tried reflashing "CF-Root-SGS2_XX_OXX_LP6-v5.2-CWM5" via odin and then the litening rom again but that still hangs when trying to boot.
Is there something obvious I should be doing? ..I am (unsuprisingly) a noob
Thank you
you could have asked at the first time itself, before various yourown attempts ?
if you are able to get CWM now, try to install the ROM after data factory reset and all the wipes + system format from Mounts & storage.
if it didnt help again go to CWM do all the wipes and format system, and switch off and get into the download mod and flash a GB stock rom from ODIN
I can get into download mode and from there have tried flashing another rom via odin (litening rom) to see if that would boot to get me into cwm but that freezes on the boot screen also
Click to expand...
Click to collapse
odin if for stock roms not custom roms / .zip files....
zaheedahmed said:
if it didnt help again go to CWM
Click to expand...
Click to collapse
that's the thing, i cant get into cwm, or at least i don't know how to. Is there a file I can install from odin that will put me straight into cwm without having a working rom?
why do you wait to boot the phone to get into the CWM,
didnt you try Vol-up+Home+Power while phone is off
hi all i m really looking for help as i am loosing my hope ,first my phone detail
GT-I9100,
2.3.5,
baseband-I9100XXKF1
kernal-2.6.35.7-I9100XXKI3-CL577579
gingerbread.jpkj2..
.now the problem is very wired,i have rooted my phone becoz i see superuser and i have CWM version 3.15 installed,have Rom manager installed but there is no way i can install JB or kitkat ..i tried almost all steps but the one place i always fail is when i try to install clockwork recovery for gt-i9100 via Odin my phone doesn't boot and shows the main screen and exclamation mark then i used a kernel flash as mention in one of the forum to reboot again..
I am amazed to see that when i go into the recovery mode i don't see all the option just 4 general option and that gives me an idea that i dont have CWM installed but then why in my icons i have CWM?? i am confused...i have tried so many times to flash it but but my phone gets soft-brick and again i flash kernel to boot into my device.i am really worried to do any more steps as i feel i will brick my phone now
..my only question is can i install JB,kitkat or any update on this device...if yes then can any one who got my issue can help me one first and last time to get it done...please help:crying:
Ok guys, Heres what I do & what happens,
(model # C6833)
1- root device
2- install new boot kernel (adv-stock-v4) (( Even tried v5))
3- unlock bootlader (only had to do it the first time, bootloader stays unlocked)
4- install cwm/TWiRP
5- get into TWIRP or CWM & wipe as I should
6- install rom. (It wont install)
7- reboot
8- stuck @ sony logo. & then reboots,
9- reinstall stock rom
This happens every time I try to install a rom.
I also get the message before I reboot, no root, would you like cmw/twirp to fix it, I go with yes. & ive tryed no as well. no difference. Still get stuck @ Sony logo & get reboot loop.
Any ideas ?
Im not new at rooting & roming.
Hey, it sounds like you're installing NUT's dual recovery and are trying to flash a CM/AOSP based ROM? I didn't find it possible to flash non-Sony ROMs using that recovery, myself. What you need to do is to first flash the kernel (boot.img) from the ROM you're trying to flash. You can do this using fastboot with the phone set to fastboot mode. The FlashTool program comes with what you need, and there's a guide to using it in the development forum. The kernel contains the recovery (either CWM or TWRP), so after flashing that, you can boot to recovery and install any CM/AOSP ROM you wish.
Triflot said:
Hey, it sounds like you're installing NUT's dual recovery and are trying to flash a CM/AOSP based ROM? I didn't find it possible to flash non-Sony ROMs using that recovery, myself. What you need to do is to first flash the kernel (boot.img) from the ROM you're trying to flash. You can do this using fastboot with the phone set to fastboot mode. The FlashTool program comes with what you need, and there's a guide to using it in the development forum. The kernel contains the recovery (either CWM or TWRP), so after flashing that, you can boot to recovery and install any CM/AOSP ROM you wish.
Click to expand...
Click to collapse
I did the flashtool thing. ( I'll edit my post ) I did the boot.img & Im trying to use SlimRom. Everything seems to be fine until I try & install the rom. Then it goes to hell.
Btw, Slimrom is compatable.
So what's the actual error message you get upon installing a ROM?
Something like, installation canceled. could not install rom. It goes threw a few steps. gets a few things installed (or so it seems) & then it hangs & I get that message. I thought, at first, it may have been a corrupt download. But after a few times of downloading it. I kinda think its no longer that.
Have you tried another ROM? Someone else is also having boot trouble with Slim in its development thread.
No actually, I have not. I will soon though now. And report back. First I need a stock U.S. rom. Just in case. Cant seem to find one.
Been using a CE (Central Europe) based stock rom.