Hi I have rooted my UK i9100 with odin and successfully installed resurrection remix previously. When trying to flash an updated version I stupidly forgot to factory wipe and now my phone wont boot, it gets stuck on the rom boot screen and i cant get into cwm.
I can get into download mode and from there have tried flashing another rom via odin (litening rom) to see if that would boot to get me into cwm but that freezes on the boot screen also. I tried to use Galaxys2recovery as shown on zedomax youtube channel but then realised that is done from gingerbread only. I tried reflashing "CF-Root-SGS2_XX_OXX_LP6-v5.2-CWM5" via odin and then the litening rom again but that still hangs when trying to boot.
Is there something obvious I should be doing? ..I am (unsuprisingly) a noob
Thank you
you could have asked at the first time itself, before various yourown attempts ?
if you are able to get CWM now, try to install the ROM after data factory reset and all the wipes + system format from Mounts & storage.
if it didnt help again go to CWM do all the wipes and format system, and switch off and get into the download mod and flash a GB stock rom from ODIN
I can get into download mode and from there have tried flashing another rom via odin (litening rom) to see if that would boot to get me into cwm but that freezes on the boot screen also
Click to expand...
Click to collapse
odin if for stock roms not custom roms / .zip files....
zaheedahmed said:
if it didnt help again go to CWM
Click to expand...
Click to collapse
that's the thing, i cant get into cwm, or at least i don't know how to. Is there a file I can install from odin that will put me straight into cwm without having a working rom?
why do you wait to boot the phone to get into the CWM,
didnt you try Vol-up+Home+Power while phone is off
Related
I updated to KP8 and have found it usable, however I fancied trying some MIUI. Unfortunately I am unable to flash anything with ClockWork Recovery. I initially tried and the update went through fine but the device said something about 'forced upload' after trying to boot. I tried flashing standard Clockwork Recovery via Odin and flashing the ROM again and it just stuck at the boot screen. I have tried a full reflash with MODEM, PDA and Phone with the KP8, KL3 and KL1 firmware. I am able to boot into stock firmware and it runs fine but as soon as I install a custom ROM zip via CWM I simply cannot boot. I have tried with both MIUI and DarkyROM HD zips. I have also tried flashing CWM with both the generic tar and the corresponding CFROOT file for each stock firmware and for each I get the same result. Sometimes it says 'forced upload' when I try and boot back into recovery and I have to flash the whole ROM (or CFROOT file) again to get a recovery back.
Does anyone have any idea what might be causing this problem?
As we speak I am running stock, unrooted KL1 firmware with no problems. I will be able to install CWM and subsequently boot fine but I know as soon as install a ROM through the 'install zip rom sdcard' method in the recovery menu I will just get a boot loop.
Thanks in advance guys.
Try
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Followed by root and your custom rom .
jje
hi,
i got a P7510 working fine, flashed to AOKP Milestone4 4.0.3 (or 404) ... today i was trying to revert back to stock 3.x, but ODIN couldn't flash all the way, it always stuck somewhere when flashing system.img
i tried many ways, with or without PIT file, no luck ... tried on many different version of stock rom, same problem
it can still go download mode, it can still be flashed to CWM recovery ... but when flash stock rom, it stops ... anyway to put custom rom to the internal memory to flash thrugh recovery?
by the way, if i go CWM recovery, i can mount every partitions except /data ... bcoz the partition is broken? how can i repartition it?
thanks in advanced.
thnx for watching, it is solved by just using another pc ...
weird, but yup, it flashed all the to the end, and phone just reboot itself into setup screen ...
Hi Everyone! just a rookie here in need of a bit of advice.
I'm a Galaxy S II I9100 owner and have my phone rooted and all setup with custom roms and been comfortable with flashing for some time now. My ROM of choice recently was Vanilla Rootbox and have to say the ROM has been fantastic with very few bugs to report. Last night i recieved the OTA update via Goo Manager for Vanilla Rootbox 3.4. I downloaded the full update over wifi and flashed with all wipes no worries. Next step was to flash the latest GAPPS and i figured there would be nothing wrong with flashing the GAPPS zip i had on my sd card that i had downloaded the last time i was notified of a GAPPS update via Goo manager as well. After flashing, wiping everything and rebooting again. My phone then booted up to a series of dialog boxes indicating that many google processes had stopped functioning. apps.google.com etc etc. A similar error has been reported in the Vanilla Rootbox thread by another user but i wasnt able to report this bug their either because my post count is too low to post in a development forum. So after seeing this error i rebooted into recovery to flash my last backup but CWM recovery came back with an error messaging stating it couldnt mount either ext or int sdcard. i did a factory reset which made no difference to the problem whatsoever. I then downloaded ODIN and the latest stock ICS Rom and flashed it via ODIN with no reported errors. My phone now boots through the optus boot animation and is stuck at the Galaxy S 2 screen with the flashing red and yellow animation over the S. If i turn off the phone with the power button, the phone turns off and immediately starts again and gets stuck at the flashing s screen. I've taken the battery sim and ext sd card out and put it all back in only for the problem to persist.
If anyone could help me there's a donation and my thanks in it!
Much appreciated
Nick
tried to re flash another stock ROM?
If so, tried factory reset the phone after the flash?
As long as you can get to DL mode, you are good to keep on flashing till you are up & running.
And then you got this
Remember to update your kies and make sure you close it all up before flashing with odin. If you are in 4.0.4 beware of the brick bug.
gastonw said:
tried to re flash another stock ROM?
If so, tried factory reset the phone after the flash?
As long as you can get to DL mode, you are good to keep on flashing till you are up & running.
And then you got this
Remember to update your kies and make sure you close it all up before flashing with odin. If you are in 4.0.4 beware of the brick bug.
Click to expand...
Click to collapse
Kies has never been installed on this computer but i did use the usb drivers mentioned in the soft brick recovery guide you linked. I used some information from the guide to flash this stock rom but i couldnt flash or wipe the partition because im unsure where to get the .PIT file required? i cant get past the boot animation so no factory reset possible and yes i can still get into download mode!
darkstar117 said:
Kies has never been installed on this computer but i did use the usb drivers mentioned in the soft brick recovery guide you linked. I used some information from the guide to flash this stock rom but i couldnt flash or wipe the partition because im unsure where to get the .PIT file required? i cant get past the boot animation so no factory reset possible and yes i can still get into download mode!
Click to expand...
Click to collapse
wow wow, leave pit files alone for now, they are nasty.
What stock ROM did you flash? 4.0.4 or 4.0.3?
You can factory reset via recovery mode.
Try installing kies anyway, it can't never hurt. Just make sure all applications are closed before you re-flash.
here's jb leak, might help:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
Right so i flashed I9100XWLP8 stock rom (4.0.3). Just then i flashed Siyah Kernel and attempted to use the factory reset function in recovery there, i get a message down the bottom mentioning that it can't mount my internal SD.
darkstar117 said:
Right so i flashed I9100XWLP8 stock rom (4.0.3). Just then i flashed Siyah Kernel and attempted to use the factory reset function in recovery there, i get a message down the bottom mentioning that it can't mount my internal SD.
Click to expand...
Click to collapse
Tell me your:
Model
Firmware
Country
Carrier
Always mention this
try flashing jb leak (ROM, modem & kernel package).
I have Galaxy note 1 i717D from Telus canada. it was giving me some troubles so i decided to download stock firmware from this link
http://androidromupdate.com/2013/05...elly-bean-upgrade-on-telus-galaxy-note-i717d/
Everything went okay but after restart its showing me these errors
https://share.htc.com/3mq2dJEj7
Could anybody please let me know what is this and how can i go from here. I tried wipe device, wipe cache but all are coming back with red error lines.
I took out the battery to restart it its showing me android sign with ball spinning in its tummy
Thanks
Update your recovery to TWRP 2.5.
rangercaptain said:
Update your recovery to TWRP 2.5.
Click to expand...
Click to collapse
Could you please let me know how can i do this, I am trying to find it myself too but if anycase you have tried please let me know, Do i need to do it even when I am trying to do stock recovery ?
I don't see what installing TWRP 2.5 has anything to do with this install. OP is installing stock ROM with odin which means stock recovery.
You should be using Odin to do the install as instructed in the link. I don't understand why the stock recovery is even showing after a restart or why the you would toggle it after a flash.
Agoattamer said:
I don't see what installing TWRP 2.5 has anything to do with this install. OP is installing stock ROM with odin which means stock recovery.
Click to expand...
Click to collapse
Let me draw you a picture. Flash TWRP with Odin. Let it root the phone. Use TWRP to flash the rom, stock or custom.
Installing stock anything doesn't mean stock recovery. Odin is used when phone is in download mode.
But the ROM he is flashing is a stock.tar. That can only be flashed with odin. Custom recovery has nothing to do with it and will not help him achieve what he is wanting to do. OP has even mentioned he wants stock recovery. What he is doing in stock recovery after flashing the ROM with Odin has me baffled.
I don't know why "Install TWRP" is the answer to all problems on this forum. Running the updated CWM has suited me just fine and has been able to flash any ROM I wanted to try.
Hi,
I tried to update my cynagonrom nightly when my phone got stuck and was not working. I just went to my Teamwin recovery program.
I tried to wipe my cache etc but my phone just gotten worse.
Now I can only get into the recovery mode. Can i recover my from phone here
Easy solution...
joojo5 said:
Hi,
I tried to update my cynagonrom nightly when my phone got stuck and was not working. I just went to my Teamwin recovery program.
I tried to wipe my cache etc but my phone just gotten worse.
Now I can only get into the recovery mode. Can i recover my from phone here
Click to expand...
Click to collapse
Happened to me because i tried an upgrade of a CM unofficial without update the recovery
The solution is "easy": download a stock rom from samfirmware, flash it with ODIN (google: flash stock rom with odin) and your phone come back to life. After that make sure to update the Recovery (suggest Philz), add the zip file of the rom and flash it ...of course,don't flash the last rom that cause this
THE NEXT TIME, before flashing a NIGHTLY CM rom ,do a NANDROID Backup!!