hi,
i got a P7510 working fine, flashed to AOKP Milestone4 4.0.3 (or 404) ... today i was trying to revert back to stock 3.x, but ODIN couldn't flash all the way, it always stuck somewhere when flashing system.img
i tried many ways, with or without PIT file, no luck ... tried on many different version of stock rom, same problem
it can still go download mode, it can still be flashed to CWM recovery ... but when flash stock rom, it stops ... anyway to put custom rom to the internal memory to flash thrugh recovery?
by the way, if i go CWM recovery, i can mount every partitions except /data ... bcoz the partition is broken? how can i repartition it?
thanks in advanced.
thnx for watching, it is solved by just using another pc ...
weird, but yup, it flashed all the to the end, and phone just reboot itself into setup screen ...
Related
I updated to KP8 and have found it usable, however I fancied trying some MIUI. Unfortunately I am unable to flash anything with ClockWork Recovery. I initially tried and the update went through fine but the device said something about 'forced upload' after trying to boot. I tried flashing standard Clockwork Recovery via Odin and flashing the ROM again and it just stuck at the boot screen. I have tried a full reflash with MODEM, PDA and Phone with the KP8, KL3 and KL1 firmware. I am able to boot into stock firmware and it runs fine but as soon as I install a custom ROM zip via CWM I simply cannot boot. I have tried with both MIUI and DarkyROM HD zips. I have also tried flashing CWM with both the generic tar and the corresponding CFROOT file for each stock firmware and for each I get the same result. Sometimes it says 'forced upload' when I try and boot back into recovery and I have to flash the whole ROM (or CFROOT file) again to get a recovery back.
Does anyone have any idea what might be causing this problem?
As we speak I am running stock, unrooted KL1 firmware with no problems. I will be able to install CWM and subsequently boot fine but I know as soon as install a ROM through the 'install zip rom sdcard' method in the recovery menu I will just get a boot loop.
Thanks in advance guys.
Try
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Followed by root and your custom rom .
jje
Hi I have rooted my UK i9100 with odin and successfully installed resurrection remix previously. When trying to flash an updated version I stupidly forgot to factory wipe and now my phone wont boot, it gets stuck on the rom boot screen and i cant get into cwm.
I can get into download mode and from there have tried flashing another rom via odin (litening rom) to see if that would boot to get me into cwm but that freezes on the boot screen also. I tried to use Galaxys2recovery as shown on zedomax youtube channel but then realised that is done from gingerbread only. I tried reflashing "CF-Root-SGS2_XX_OXX_LP6-v5.2-CWM5" via odin and then the litening rom again but that still hangs when trying to boot.
Is there something obvious I should be doing? ..I am (unsuprisingly) a noob
Thank you
you could have asked at the first time itself, before various yourown attempts ?
if you are able to get CWM now, try to install the ROM after data factory reset and all the wipes + system format from Mounts & storage.
if it didnt help again go to CWM do all the wipes and format system, and switch off and get into the download mod and flash a GB stock rom from ODIN
I can get into download mode and from there have tried flashing another rom via odin (litening rom) to see if that would boot to get me into cwm but that freezes on the boot screen also
Click to expand...
Click to collapse
odin if for stock roms not custom roms / .zip files....
zaheedahmed said:
if it didnt help again go to CWM
Click to expand...
Click to collapse
that's the thing, i cant get into cwm, or at least i don't know how to. Is there a file I can install from odin that will put me straight into cwm without having a working rom?
why do you wait to boot the phone to get into the CWM,
didnt you try Vol-up+Home+Power while phone is off
Hi Everyone! just a rookie here in need of a bit of advice.
I'm a Galaxy S II I9100 owner and have my phone rooted and all setup with custom roms and been comfortable with flashing for some time now. My ROM of choice recently was Vanilla Rootbox and have to say the ROM has been fantastic with very few bugs to report. Last night i recieved the OTA update via Goo Manager for Vanilla Rootbox 3.4. I downloaded the full update over wifi and flashed with all wipes no worries. Next step was to flash the latest GAPPS and i figured there would be nothing wrong with flashing the GAPPS zip i had on my sd card that i had downloaded the last time i was notified of a GAPPS update via Goo manager as well. After flashing, wiping everything and rebooting again. My phone then booted up to a series of dialog boxes indicating that many google processes had stopped functioning. apps.google.com etc etc. A similar error has been reported in the Vanilla Rootbox thread by another user but i wasnt able to report this bug their either because my post count is too low to post in a development forum. So after seeing this error i rebooted into recovery to flash my last backup but CWM recovery came back with an error messaging stating it couldnt mount either ext or int sdcard. i did a factory reset which made no difference to the problem whatsoever. I then downloaded ODIN and the latest stock ICS Rom and flashed it via ODIN with no reported errors. My phone now boots through the optus boot animation and is stuck at the Galaxy S 2 screen with the flashing red and yellow animation over the S. If i turn off the phone with the power button, the phone turns off and immediately starts again and gets stuck at the flashing s screen. I've taken the battery sim and ext sd card out and put it all back in only for the problem to persist.
If anyone could help me there's a donation and my thanks in it!
Much appreciated
Nick
tried to re flash another stock ROM?
If so, tried factory reset the phone after the flash?
As long as you can get to DL mode, you are good to keep on flashing till you are up & running.
And then you got this
Remember to update your kies and make sure you close it all up before flashing with odin. If you are in 4.0.4 beware of the brick bug.
gastonw said:
tried to re flash another stock ROM?
If so, tried factory reset the phone after the flash?
As long as you can get to DL mode, you are good to keep on flashing till you are up & running.
And then you got this
Remember to update your kies and make sure you close it all up before flashing with odin. If you are in 4.0.4 beware of the brick bug.
Click to expand...
Click to collapse
Kies has never been installed on this computer but i did use the usb drivers mentioned in the soft brick recovery guide you linked. I used some information from the guide to flash this stock rom but i couldnt flash or wipe the partition because im unsure where to get the .PIT file required? i cant get past the boot animation so no factory reset possible and yes i can still get into download mode!
darkstar117 said:
Kies has never been installed on this computer but i did use the usb drivers mentioned in the soft brick recovery guide you linked. I used some information from the guide to flash this stock rom but i couldnt flash or wipe the partition because im unsure where to get the .PIT file required? i cant get past the boot animation so no factory reset possible and yes i can still get into download mode!
Click to expand...
Click to collapse
wow wow, leave pit files alone for now, they are nasty.
What stock ROM did you flash? 4.0.4 or 4.0.3?
You can factory reset via recovery mode.
Try installing kies anyway, it can't never hurt. Just make sure all applications are closed before you re-flash.
here's jb leak, might help:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
Right so i flashed I9100XWLP8 stock rom (4.0.3). Just then i flashed Siyah Kernel and attempted to use the factory reset function in recovery there, i get a message down the bottom mentioning that it can't mount my internal SD.
darkstar117 said:
Right so i flashed I9100XWLP8 stock rom (4.0.3). Just then i flashed Siyah Kernel and attempted to use the factory reset function in recovery there, i get a message down the bottom mentioning that it can't mount my internal SD.
Click to expand...
Click to collapse
Tell me your:
Model
Firmware
Country
Carrier
Always mention this
try flashing jb leak (ROM, modem & kernel package).
So I have a Sprint Galaxy Mega and it seems as though it may be semi-bricked. It will not boot past the GALAXY MEGA logo. It will just continuously power cycle to and from that logo. If I attempt to put it in recovery, it will say "RECOVERY BOOTING" in blue letters as usual, then power cycle right back to the GALAXY MEGA screen. It will boot into Odin mode and accept Odin files, but after attempting do do a typical "stock Odin" scenario, nothing has changed. I looked around for the Pit but cannot seem to find it. Does anyone has a reliable link to the latest Odin stock restore and the PIT file that matches it?
Maybe an error with your system data. So you can't reboot into recovery ? If you can try to wipe data and cache and reboot.
It may be an abnormal re-partition when flashing stock rock, and then I can't help you (have the i9205 international model). Some members of this section have the Sprint version, try to send them a PM if nobody can help you
Nope, no recovery. I was considering flashing a custom recovery to it to see what it does but I don't wanna kill the phone any more than it already is...
Yes I understand. But flashing custom recovery can solve your problem, only if you can boot on it. I think it can't make more damages to your phone, he just always stuck on boot phase like a brick, but if you don't want to try, wait for a developer making you a PIT file. More safe, the Galaxy Mega have a too poor development support for risk anything...
Well I went ahead and flashed TWRP to it. It will boot into TWRP just fine. Tried flashing the stock L900 ROM zip and it still won't boot.
Well I installed a custom ROM, SlimKat, and the phone boots. If I install the stock ROM located in the following link, OP's signature, the phone goes right back to bootlooping. ???
I need either the stock ROM or a ROM with dialer codes because this phone will be flashed to a regional carrier.
what recovry version you use bro. maybe recovery problem. try use your custom rom to flash another recovery from philz. the latest one. some time recovery dont work properly to downgrade from 4.4.2 to stock 4.2.2.
Great, so with Philz Touch Recovery, I never had problems for downgrade and I do this often for testing roms. Now it should not bootloop if you reflash stock.
I am using "CWM-based recovery 6.0.4.7"
I will try Philz recovery
After trying Philz recovery to flash the stock file I found, it once again bootlooped. Is there another stock ROM floating around somewhere or possibly a custom ROM that has dialer codes such as ##3282# enabled?
No idea... But actually the most complete stock based custom rom is MegaFire I think. Flash V5 (not V5x !) it should be enabled.
I don't see what is the problem while flashing stock rom... Oh ! Maybe you haven't enabled USB Debugging, I forgot to do that one time and I had some issues, in case you try to flash a firmware where Knox or others features are on with a modem without these, may cause bootloop. I've searched for 2 days before solve that little problem...
Have you tried another firmware ? If you can flash custom rom, something went wrong before flash... Odin folder is complete ?
Strange...once again a boot loop after flashing the MegaFire ROM
I'm almost certain I need the PIT file. I cannot find it anywhere.
Well I got the phone to boot from that rooted stock ROM FINALLY. I don't remember for sure but I think what I did was first flash TWRP, then flashed boot.img.tar that I found somewhere, it was listed for the Sprint Mega. I then booted into TWRP and flashed the stock rooted ROM(zip) I mentioned before. It now boots perfectly and everything works except one tiny little detail. No WiFi, no cellular signal at all. Baseband version: unknown in About phone.Already tried flashing the Sprint stock modem from the same download link as the ROM and it didn't work.
I'm having the same problem too dude, I
I download n flash all.the firmware I could find online, since I have no idea what the country of origin is. But most of them work, but no WiFi, Bluetoothand the sim card slot don't read
VirtueToVice said:
Well I got the phone to boot from that rooted stock ROM FINALLY. I don't remember for sure but I think what I did was first flash TWRP, then flashed boot.img.tar that I found somewhere, it was listed for the Sprint Mega. I then booted into TWRP and flashed the stock rooted ROM(zip) I mentioned before. It now boots perfectly and everything works except one tiny little detail. No WiFi, no cellular signal at all. Baseband version: unknown in About phone.Already tried flashing the Sprint stock modem from the same download link as the ROM and it didn't work.
Click to expand...
Click to collapse
Hi all,
For backup purpose :angel:, I tried to upgrade to the latest Recovery_CWM_6.0.4.7_I9100.zip using Install Zip from an older CWM of my Samsung Galaxy S2.
And I'm in big trouble because after installing the clockworkmod recovery the phone won't boot anymore. It's stuck on "Galaxy SII - GT-I9100 - SAMSUNG" splash screen :crying:
The CWM works and gives this log:
I:Can't partition non mmcblk device: /devices/platform/dw_mmc//mmc_host/mmc0/mmc0
I can mount partition and accessed it from my pc.
I wiped cache and dalvic cache without more luck.
There is no vibration on boot either.
As my data aren't backup yet, I don't want to wip them out with some ROM. Did I miss something?
Any hint about what I should do to have the phone boot again would be greatly appreciated! :highfive:
Cheers
@GalaxyS2u did you flashed the right cwm/kernel for your rom since they are included in one boot.img? If you cannot flash an new rom anymore in the recovery or reflash the kernel /recovery then you need to flash an kernel/recovery in odin. Try an odin philz kernel if there is one else flash siyahkernel with odin.
And that partition thing is that even an valid partition ?
Backup your data first in recovery then try my things i suggested. I still think that the reason why it doesnt boot is because you flashed the wrong recovery/kernel.
Are you on stock btw? I suggest to try to flash philz kernel if you are on stock.
@wulsic
Thanks a lot for your hint :good:. That saves my precious! :victory:
I can manage to come back to my old CWM recovery with a flash of siyah with odin.
The new CWM works only with a new ROM and not with my old stock. With this experience, I am even able to upgrade to the KitKat version.
Viva this model and this community!
@GalaxyS2u glad to hear you figured it out I also had that problem when i flashed S2 first i soon found out that kernel/recovery were in one happy flashing?