The title may seem really weird but it is the actual question. This is my transition into the andriod tablet arena, and I have been using the TP for a few days now. Seems whenever the device is laying flat on a cloth covered chair, a bed anything along those lines, the screen completely freaks and no point touched will correspond to the correct area of the screen. Almost like the screen is receiving multiple input signals. When this has happened, I have been trying to search for something online or in the app store. The event that really gave me a start is when I was trying to type in something when it was laying flat, then all of a sudden a track from Bruno Mars started playing full volume (the volume was on full so that wasn't a random change). Must have pulled the track from online as I don't have anything stored on the device at this point.
If I pick the tablet up in either orientation it starts working fine.
In addition, just a few minutes ago I tried to scroll through my email and experienced the same issue, but when trying to power down, the screen wouldn't register my finger trying to select the option to power down. This even occurred after the tablet was brought upright or in landscape mode. Ended up having to hold the power button until it rebooted.
Really hoping this isn't an issue with the hardware. Anyone seen this or have any insight on what may be happening?
Thanks
Possibly static inteferance from the cloth? Just a guess, but one that fits,
Sent from my Transformer Prime TF201 using xda premium
right on! completely overlooked that. Since it is winter up in the north, I guess testing this out in non-static conditions will have to wait a bit.
Yes, I've seen it before...
http://google.com/search?q=i+need+exorcist
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Seriously, get out the receipt and go back to the store. Toys going berserk by themselves are not to be trifled with, especially when your return period runs out. Don't play guessing games.
PS: It's not static.
Doktaphex said:
Possibly static inteferance from the cloth? Just a guess, but one that fits,
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
Probably resetting the GPS also. GPS works if there is more humidity in the air. ;-)
Awesome post, although I haven't seen a head swivel around on my screen, might happen at some point though...... lol
I pre-ordered this through tigerdirect, and they seem to have enough issue fulfilling orders that I will try and contact asus directly.
Actually I was trying for the stringy hair Asian ghost chick.. you know the one that crawled out of stuff.. but can't remember the damn movie title.. oh wait.. it's a-comin.. YES I REMEMBER HAHAH!
Yes yes.. if you ever see this on your screen.. RMA it..
hahahaha, I think you are referring to the Ring movie.
I just got off the phone with Asus and the person I talked with had never heard of this type of issue. The only suggestion was to send it in, but if their supply chain is still struggling to fill orders from across the US then I'm guessing an RMA will take a couple weeks if they would simply send a replacement tablet. I just got the thing so I want to play with it!
But since there is the base warranty on it, I could wait a bit and if it still does it after a month or so I could inquire again.
The only other thing I would be waiting for is the ICS upgrade. I have a gnex phone on vzw and can really see the improvements made going to ICS. Is mid to late Jan still the timeframe people have heard?
Nonono not the ring that one has orcs and hobbits.. oh and at least one skateboarding ninja elf..
PS: he shoulda had nunchucks.. would be way more awesomeness..
LOTR II I think, forgot about the skateboarding part. That was really throwing me off!
See my other thread titled "ghost tapping". I'm having same exact problem as you, only I've been using it flat on a wooden desk when it happens.
Sent from my Galaxy Nexus using xda premium
Doktaphex said:
Possibly static inteferance from the cloth? Just a guess, but one that fits,
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
I doubt it... the metal back would act as a shield against static interference.
I just finished posting in a thread where I explained that the back of the TFP has a chassis ground to the charging circuit and thus the battery. It's possible that on your TFP, you have a bad ground from the back of the device to the PCT layer, which is incredibly sensitive to electrical current (since this is how it detects touch input).
Since the back is a ground for the device, small amounts of current are constantly being thrown off by various circuits into the back of TFP, and thus are making their way into the PCT layer where they're wreaking havoc on touch calculations. Once you grab ahold of the back of your TFP, those currents ground through you, normalizing the circuit and allowing the PCT to function normally.
That's my theory at least.
We went through that with Sensation. Touch screen needs grounding to works properly with metal back plate. I bet if you actually hold the tablet in one hand, it works just fine. It's not something Asus can fix tbh, this problem occures with most devices which have metal in the back cover.
Edit. Actually, thinking about it, yes, if something is grounded to back plate, fixing might be bad, but above might still apply.
Sent from my HTC Sensation Z710e using XDA App
I was starting to think along those same lines but an hour ago I had the tablet laying on a bedspread and did not experience any issue.
Along the lines for your theory I wonder if whether the unit grounds through the back panel or further through me is fine, but the slight charge is just too much and royally throws everything out of whack.
Have most people opted to get some kind of case or protective film (I.e. Skinomi) that would most likely help this issue?
militarymedic23 said:
I was starting to think along those same lines but an hour ago I had the tablet laying on a bedspread and did not experience any issue.
Along the lines for your theory I wonder if whether the unit grounds through the back panel or further through me is fine, but the slight charge is just too much and royally throws everything out of whack.
Click to expand...
Click to collapse
Click on my nick and look at touch screen issue thread I started. Reading OP should give you some idea. If my theory about ATP is correct fully charging and discharging it should fix it for a while.
Edit. Issue is very random normally.
Also, protective case or film are likely to make it worse.
Sent from my HTC Sensation Z710e using XDA App
Hmm, the case issue does make sense. I suppose any cover of the common materials would amplify the static if the it were moved around on the suspected fabric.
Electrofreak said:
I doubt it... the metal back would act as a shield against static interference.
Click to expand...
Click to collapse
wouldn't the metal back act as a conductor for the electricity?
tinky1 said:
It's not something Asus can fix tbh, this problem occures with most devices which have metal in the back cover.
Click to expand...
Click to collapse
IPad has metal back cover, no issues there. Gotta be something else.
Sent from my Galaxy Nexus using xda premium
theoilman said:
wouldn't the metal back act as a conductor for the electricity?
Click to expand...
Click to collapse
The PCT layer is under the glass on the other side of the TFP, and electricity follows the path of least resistance. The chassis is grounded to the charging circuit, so any static shock is probably going to end up dumped into the battery.
Unless, of course, as I theorize, the chassis has a bad ground to the PCT layer.
Otherwise, everyone's TFP would go nuts when they used it while on fabric.
Related
Well I might be the first to have let my prime fall. Teetered off a stack of towels and fell to the rug about two feet down. Was playing music, and it instantly stopped. Now I can't get it to turn on. Not sure what to do. Plugged it into the charger and the led on the power button lights up, but I was at >90 battery.
If I hold the power button for 10 seconds the unit vibrates once, but no display. Then about 30 seconds later I get a small ding and a screen lock sound.
Any thoughts?
Sent from my Inspire 4G with ICS!
Try the reset hole. You can us a pencil tip. It's located on the top edge opposite the volume rocker.
Sent from my Transformer Prime TF201 using Tapatalk
It sounds like Asus made the device so horribly that even a 2 feet drop onto carpet will ruin it...
They probably used sticky rice to hold the internals together. Woot go ASUS! I really hope they get into some trouble over this tablet.
if it doesn't look damaged from the outside from fall, just return and exchange it. we won't say anything
was it inside a case? did it fall on its back, flat on its face, or on a corner? strange how such a short fall on carpet did that. I'd return it asap. should be easy to exchange. especially if it doesn't look like you yourself damaged it.
nyijedi said:
Try the reset hole. You can us a pencil tip. It's located on the top edge opposite the volume rocker.
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
Just tried that. No different. Held reset and power. It vibrates once upon release,but no display, and I don't think it boots
Sent from my Inspire 4G with ICS!
demandarin said:
if it doesn't look damaged from the outside from fall, just return and exchange it. we won't say anything
was it inside a case? did it fall on its back, flat on its face, or on a corner? strange how such a short fall on carpet did that. I'd return it asap. should be easy to exchange. especially if it doesn't look like you yourself damaged it.
Click to expand...
Click to collapse
It doesn't look damaged at all.
No case yet. Fell and hit on the side.
The sucky part is that I'm on vacation. There is a best buy here, but I doubt they will let me return it without the box, and I doubt they have one in stock to give me back. Ugh
Sent from my Inspire 4G with ICS!
Damn, it sounds like the Transformer Prime is extra fragile.
Because one guy dropped it and apparently it is broke the Prime also is fragile? For real, grow up.
Interesting. I just have my wifi tether turned on. And my transformer prime connected to it...so it seems like it might be turning on? Anyone know how to open this case up?
Sent from my Inspire 4G with ICS!
JoeyLe said:
Because one guy dropped it and apparently it is broke the Prime also is fragile? For real, grow up.
Click to expand...
Click to collapse
you mad.
This whole thread is a trollers delight
Modded by MBOK
mrokeefe said:
This whole thread is a trollers delight
Modded by MBOK
Click to expand...
Click to collapse
There are a lot of them! Don't get me wrong. I love my tp that's why I really wish I knew what was going on
Sent from my Inspire 4G with ICS!
It vibrates; you hear the screen lock sound; tethering? Looks like your screen cable came loose.
Seems like you broke the LCD the prime itself is on you just don't have picture I would say let it sit a day and good luck
If you have a micro HDMI cable and a TV, you could try hooking it up to check if the device is turning on and if the problem is only with the screen itself.
avinash60 said:
If you have a micro HDMI cable and a TV, you could try hooking it up to check if the device is turning on and if the problem is only with the screen itself.
Click to expand...
Click to collapse
if I was in the OP's predicament, I would definitely give the suggestion in this post a shot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dsmitty166 said:
Interesting. I just have my wifi tether turned on. And my transformer prime connected to it...so it seems like it might be turning on? Anyone know how to open this case up?
Sent from my Inspire 4G with ICS!
Click to expand...
Click to collapse
don't go through all that and void warranty. cuz if you open it up and can't fix it, they will know. then they will accuse you of being the one that broke it n you be outback.
slap that bsckside around slightly n she if she likes it..lmfao or the area where it hit the floor at. if display comes back on, that's just a temp fix till you exchange it.
>Any thoughts?
Hit it again.
>Anyone know how to open this case up?
Hmmm has anyone besides jdbaker opened this thing up.I would love to see the inside & see where antennas are placed.?
Arun01 said:
Hmmm has anyone besides jdbaker opened this thing up.I would love to see the inside & see where antennas are placed.?
Click to expand...
Click to collapse
I doubt if he, Jdbaker, really did open it up. he produced no pics or videos of that claim. he just said that to try to make more people believe his theory. just like he said Asus Engineers called him personally to confirm his theories. after he also told engineers he opened up the back himself. sounds like some Major B.s. to me..lol of he really did do that he would've made sure to take pix to back up his claim. I know I would have.
So something strange happened to me. I did nothing weird when I picked up my prime but of a sudden, crack.
My prime's screen broke in two over the length of the body.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope that the warranty wont be a problem, but i'm not sure how to handle it.
Should I go to asus directly or go to the shop where I bought it (mediamarkt nl)
I'm also interested if i'm the first person were the screen cracks when the prime is picked up.
There have been a few odd issues with screen cracking.
Sent from my Transformer Prime TF201 using Tapatalk
Another broken screen
Just posted on another thread about my TF201 screen turning up cracked when I took it out my laptop bag this morning. It was mounted in the dock at the time and hadn't been dropped or mishandled - just carried to work and taken out.
Unfortunately, the screen isn't covered by warranty and the local ASUS service provider (in Australia) quoted $400 for the repair (parts, labour, shipping). Not sure what I'm going to do (the crack is in a corner and is small enough to live with) but I must say I've lost a lot of confidence in ASUS over this purchase (even before the screen broke I was having crash/reboot problems and crummy WIFI reception).
Is the crack only on the inside(can you feel the crack with your fingernail)?
It may be due to heat, it has happened with other devices, and if that's the case and they don't cover it its really f'd up.
I can only feel the crack on the far right side.
However heat would be a strange reason for me because I didn't touch my tablet for more than an hour so before the fatal pick up.
Sent from my HTC Desire using XDA App
Check out http://www.androidworld.nl/forum/asus-eee-pad-transformer-prime-tf201/30241-scherm-kapot.html
There is a guy with a spontaneous crack in the upper right corner
According to Asus there had been to much pressure on that spot.
Maybe he pinched too hard to get better wifi/ gps signal.
No warranty, cost him 142,81 euros to fix.
Hope you are not the same guy.
Wow, that's really similar to mine. I just sent mine in for a warranty claim. Not sure they'll approve it, but this gives both of us more ammo for our claim. I've got post at the following link with a video on youtube as well.
http://forum.xda-developers.com/showthread.php?t=1498237&page=2
http://www.transformerforums.com/fo...er-prime-broken-glass-what-should-i-do-7.html
Here's a video:
http://youtu.be/SL03vjH-TOA
And a pic:
Don't all of these seem to be originating from the top right, or at least in the top-half of the screen? (Assuming Asus logo is top left). I wonder if it's a hardware revision issue.. Do you all have similar serial numbers?
Wow, that's really frustrating..
So I guess no storing the tablet in the dock (at least not closed, anyway).
so far my screen hasn't ever cracked. But whenever the picture keeps flickering/going fussy/shaking, i'll not put pressure on the edges to try and fix it.
I'm also going to keep paying my extended monthly cover plan too just in case!
Mine also has a crack in the upper right. It is only noticeable in the right light and even then barely, its about 2 inches long, for now. It is the only thing I have a complaint about. Everything works fine on mine except the GPS and I can live without that.
buster6070 said:
Wow, that's really similar to mine. I just sent mine in for a warranty claim. Not sure they'll approve it, but this gives both of us more ammo for our claim. I've got post at the following link with a video on youtube as well.
http://forum.xda-developers.com/showthread.php?t=1498237&page=2
http://www.transformerforums.com/fo...er-prime-broken-glass-what-should-i-do-7.html
Here's a video:
http://youtu.be/SL03vjH-TOA
And a pic:
Click to expand...
Click to collapse
Yea, pretty much same situation / same result.
At least were not alone in this.
T.A Blet said:
Check out http://www.androidworld.nl/forum/asus-eee-pad-transformer-prime-tf201/30241-scherm-kapot.html
There is a guy with a spontaneous crack in the upper right corner
According to Asus there had been to much pressure on that spot.
Maybe he pinched too hard to get better wifi/ gps signal.
No warranty, cost him 142,81 euros to fix.
Hope you are not the same guy.
Click to expand...
Click to collapse
From the look of it I'll probably be in the same situation...
But let's hope that with all these pictures / occurrences we/I can convince them it's not our fault but a production failure.
Picture of the crack from that link.
namebrandon said:
Don't all of these seem to be originating from the top right, or at least in the top-half of the screen? (Assuming Asus logo is top left). I wonder if it's a hardware revision issue.. Do you all have similar serial numbers?
Wow, that's really frustrating..
So I guess no storing the tablet in the dock (at least not closed, anyway).
Click to expand...
Click to collapse
I don't know about the serial number but from the look of the thread that buster6070 posted it's more of a dock problem.
My serial is C10KAS0XXXXX
Serial#: BCOKA........ here and mine cracked on the upper LEFT, near the ASUS logo.
ringomaz said:
Serial#: BCOKA........ here and mine cracked on the upper LEFT, near the ASUS logo.
Click to expand...
Click to collapse
You're not left-handed are you?
Do any of you think this might be related to where one would grab the tablet to open it up?
that's so strange.. you'd think if the crack was anywhere, it'd be where the dock holds the tablet.. I think I might stick some tiny felt pads on the dock where the top (Asus label) of the tablet comes in contact.
My serial # is BCOKAS0XXXXX
My ATP is in the mail on it's way to a service center. But I've gone ahead and emailed ASUS with a link to this thread. I emailed their "Escalation Mailbox" and simply requested they take a serious look at my tablet before dismissing it as "CID". Also letting them know that this isn't an isolated situation. I would suggest everyone with this problem do the same. It's just to easy for them to dismiss a cracked screen as damaged done by the user.
My wifes cracked this weekend in the upper left corner, it is ALWAYS docked and almost always on the dinning room table, she uses it as a laptop replacement. There is not a scratch on it! I sent a PM to Gary, I heard nothing back yet. If this is gorilla glass, then they have problems! My wifes cracked in the black area of the glass only, it is hard to even see it, but it is cracked. Hers had really bad light bleed but she did not care, I never would have lived with it since day one. Asus better find a fix for this one, or just recall them all, these problems keep growing.....
BCOKAS serial number
This is not a thread I wanted to see...
I have a BCKOSA serial number....I hope that I don't become an active member of this thread....
This makes me so freaking nervous that one day I'll have a cracked screen.
And how could warranty not cover this? I'd ***** my way into it being covered, if there's no evidence of the user dropping or mishandling it then it defaults to being considered defective doesn't it?
Yours is the only case I've heard of that the Prime wasn't docked. Seems to me like the frame is letting the screen flex too much, but how you'd keep it from doing so I have no idea.
B-Mod said:
My wifes cracked this weekend in the upper left corner, it is ALWAYS docked and almost always on the dinning room table, she uses it as a laptop replacement. There is not a scratch on it! I sent a PM to Gary, I heard nothing back yet. If this is gorilla glass, then they have problems! My wifes cracked in the black area of the glass only, it is hard to even see it, but it is cracked. Hers had really bad light bleed but she did not care, I never would have lived with it since day one. Asus better find a fix for this one, or just recall them all, these problems keep growing.....
Click to expand...
Click to collapse
Was it always shut when not in use? That seems to be a common thread, that the "covert crack" always happened after the unit was closed shut..
namebrandon said:
Was it always shut when not in use? That seems to be a common thread, that the "covert crack" always happened after the unit was closed shut..
Click to expand...
Click to collapse
Yes it is all ways shut when not used. I always shut mine also, but I don' t use mine as much as she uses her's all the time. No damage to case or to inner area of dock. I just don't know, it must be a stress issue. Is gorilla glass this fragile?
The battery cover of my Galaxy s3 seems to creak (or sit loose) when gentle pressure is applied to the battery cover a bit above the volume-up on the volume rocker. Anyone else experience this?
I have circled the area that creaks slightly when pressure is applied.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I cannot duplicate this issue.
Sounds like one of the connectors might be faulty. Pop off the cover and see if the connector nearest the problem area looks like the other ones.
I checked mine and it's fine
Sent from my SGH-T999 using xda premium
mines fine
If it's anything like the S2 battery cover, try this fix: http://forum.xda-developers.com/showpost.php?p=21473385&postcount=18
I will chime in too...mine is solid.
Well this one got me out of being a lurker on this site - I have the exact same problem in the same location and it is driving me nuts. I have visibly inspected the connectors and they all appear to be the same. Still within my return window at VZW but I hope they can just give me a new cover vs. dealing with a new phone.
I also have this issue. I have the white GS3 from AT&T. I kind of feel that I may end up with a bigger problem if I exchange for another. It's incredibly annoying considering the money I dropped on this thing, but I figure a case will cover it up, and my fingers rarely ever hang out in that area anyway.
saucyzest said:
Well this one got me out of being a lurker on this site - I have the exact same problem in the same location and it is driving me nuts. I have visibly inspected the connectors and they all appear to be the same. Still within my return window at VZW but I hope they can just give me a new cover vs. dealing with a new phone.
Click to expand...
Click to collapse
keenpine said:
I also have this issue. I have the white GS3 from AT&T. I kind of feel that I may end up with a bigger problem if I exchange for another. It's incredibly annoying considering the money I dropped on this thing, but I figure a case will cover it up, and my fingers rarely ever hang out in that area anyway.
Click to expand...
Click to collapse
i would suggest taking it to your retailer and ask them to replace it. unfortunately, i doubt they will go through the trouble of doing that for you. you could try ordering a new back cover. they are a bit pricey though.
Try detaching that side of the cover and snapping it on clip by clip. I had a slight creak, but this fixed it.
Sent from my SCH-I535 using xda app-developers app
Rockferd said:
Try detaching that side of the cover and snapping it on clip by clip. I had a slight creak, but this fixed it.
Click to expand...
Click to collapse
Thanks for the suggestion, unfortunately I've tried putting it back on every way possible, no luck. I also tried the hair dryer method from the SII and do not recommend it - the clear coating on the back started to crack around the headphone jack. I was working very carefully so it's hardly noticeable but had I been pushing harder it could have cracked a lot. It's possible that I needed to heat it more but I'm afraid to since it's already pretty dang flimsy.
I'm going to go to VZW today and we'll see what they say. I really hope they act on it, a flagship $300 device should not have creaky plastic on the back...
In my case, I can actually see that the back cover does not fit properly. Regardless of how I put the cover back on, that edge is slightly raised from the phone, which is what causes the creaking. The creaking doesn't exist on the phone itself without the back cover on.
I brought my phone in and they are 3+ weeks backordered so they suggested I try Sammy - I played with the phone again and realized the creak is actually coming from the phone case itself, and NOT the back cover.
OP try taking off your cover and pushing along the thin strip of plastic on the side of the battery, this is at least where my creak is. I tried tightening the screws but no help, this just got even more frustrating.
Sent from my SCH-I535 using xda app-developers app
saucyzest said:
I brought my phone in and they are 3+ weeks backordered so they suggested I try Sammy - I played with the phone again and realized the creak is actually coming from the phone case itself, and NOT the back cover.
OP try taking off your cover and pushing along the thin strip of plastic on the side of the battery, this is at least where my creak is. I tried tightening the screws but no help, this just got even more frustrating.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Your right mines the same it's actually coming fom side of phone between battery and volume rocker
Thought this might be interesting for some to see how a Square trade accident coverage situation goes. I will update the thread as new events occur. If this isn't kosher to some, please delete. I searched the forums hoping to find a similar thread but found nothing.
I accidentally dropped my phone in my basement Sunday the 19th and filled out a claim form online on the 20th at approximately 12:30 pm central time. I was asked if I preferred to be mailed a refurbished phone of same or similar specs but since I use my phone for work I chose repair mainly in hopes that they can fix it and I won't have to go through hassles of installing a tibu backup. If for some reason they opt not to repair it figure it'd be nice to start fresh with a new Note. I entered my credit card information to be charged the $99 deductible to begin the process.
After filing the claim you are given information that they will contact you within 1-2 business days from submitting. Currently I have not been contacted after 1.5 business days have gone by (full day today, half the day before). They state to call them if I am not contacted in this time but after 15 minutes of being on hold I figure I can waste time doing that tomorrow when a full 2 days are up. The current status online is that an agent is being assigned to my case.
About the phone: It fell about two feet from my couch to the basement cement floor and cracked the lcd diagonally across. There is a chip in the top right corner of the ceramic and dents in the metal around it. It was housed in an elago case which I now regret as it protected nothing. Phone is still functional and has been backed up for when I am able to send it in.
Well that was quick. Moments after posting I received an email with the prepaid next day air UPS label to send it to their depot in LA. What I am hoping is that if they choose to repair the lcd that the chipped corner will be addressed as well as it snags my shirt. Fingers crossed.
Definitely interested to see how this works out for you. Wish you nothing but the best. Good luck.
Ya i would love updates on this too. I have so many warrantees through them but have never had to use it yet.
I always read about how people bust their phone so easily and it baffles me that I've never broken a screen yet. I had my iPhone 4 in my lap sitting in a van and got out forgetting it was their and it fell off my lap face down onto concrete and no scratches to the screen. I had my Note in my hand and accidentally hit my hand on a car door when I was getting out and it bounced onto the concrete below, face down. Got a couple chips on the bezel but that's about it. But yours busted falling two feet off the couch. So weird....
Sent from my SAMSUNG-SGH-I717 using xda premium
tmb993 said:
I always read about how people bust their phone so easily and it baffles me that I've never broken a screen yet. I had my iPhone 4 in my lap sitting in a van and got out forgetting it was their and it fell off my lap face down onto concrete and no scratches to the screen. I had my Note in my hand and accidentally hit my hand on a car door when I was getting out and it bounced onto the concrete below, face down. Got a couple chips on the bezel but that's about it. But yours busted falling two feet off the couch. So weird....
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
What was weird was I expected it not to be broken. It's definitely not the first time it's slipped out of my hands, but it's been a trooper and kept in tact until the short drop.
Anywho...
Got bored and google searched the place they are having me mail it to. It's these guys: http://www.cfrepaircenter.com
Some spotty reviews online, so fingers crossed. Wouldn't be too happy to spend $100 + original cost of the warranty to get a shoddy repair. I'm going to add a note about the broken ceramic and jacked up metal portion in hopes that it is addressed. I'll post pictures tomorrow to show a before and after.
It depends a lot on how the phone falls. The corners of an LCD screen tend to be weak spots, so it can often crack if it lands on a corner which sounds like was the case here.
With this phone the LCD, front glass, and bezel (the silver band) are one unit. So a cracked glass = entire front replaced. The part costs about $200.
rangercaptain said:
With this phone the LCD, front glass, and bezel (the silver band) are one unit. So a cracked glass = entire front replaced. The part costs about $200.
Click to expand...
Click to collapse
That's good to hear. Would be disappointing to have a marred up corner after the service.
Here are the pics:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There are a lot of little hairline cracks in the LCD as well that don't show too well. Using a Captivate right now and even with CM10 Jelly Bean, I know I'm going to be missing the Note immediately. Off it goes in the morning!
Is that after putting your note back to stock?
You could sneeze on this bezel and it dents it is weak....its unbelievable I am on my third and the bezel has had issues on all three after one minor drop each...the things soft like cookie dough
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Eric-1987 said:
Is that after putting your note back to stock?
Click to expand...
Click to collapse
I haven't bothered doing more than rooting and unlocking it for travel. I need my phone 24/7 for work, and stock hasn't bothered me one bit (ICS or GB) on this. The phone is encrypted, if security was the question.
The finale!
Well, I got my phone back today. Looks terrific. I'll post pics later if needed, but if you know what a new Note looks like, that's what it looks like. Even arrived with the annoying little stickers that came on the bezel. Looks like they even replaced the plastic battery cover.
One minor thing is the phone was returned reset to factory due to my refusal to give up the encryption password. It's not a big deal as I ran a backup, just thought I'd mention it. I understand they needed to do QC before calling it fixed.
Have a new Otterbox Commuter case on the way tomorrow!
Decent service, fast turnaround, and pretty impressed all around. A tad bit expensive at $100 deductible but considering the cost without accident insurance and having to install the LCD myself, this was well worth it.
Thanks for sharing!
Sent from my SAMSUNG-SGH-I717 using xda premium
Awesome thanks for the updates
I just purchased a note and was thinking about whether to get this or not for it. This was great, maybe I will get one now. Glad to hear everything worked out for you.
Sent from my SGH-I897 using xda app-developers app
Hello All,
I have a big problem. I'm hoping someone can help me. I took my Asus Transformer Prime apart hoping to improve my wifi signal as per this thread. I put everything back together and booted it up. Here is a picture of my screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is my Prime DOA?
tandtmah said:
Hello All,
I have a big problem. I'm hoping someone can help me. I took my Asus Transformer Prime apart hoping to improve my wifi signal as per this thread. I put everything back together and booted it up. Here is a picture of my screen.
Is my Prime DOA?
Click to expand...
Click to collapse
can you repost the link? I cant follow the one there
whycali said:
can you repost the link? I cant follow the one there
Click to expand...
Click to collapse
I have to wait for 10 posts before I can post an outside linke...
I've seen that before - when I was building my own projector. It could be a bent ffc cable. You might want to crack it back open and verify they are all properly seated in their slots and nothing is pressing against them.
Hope that helps!
1moreCyberdude said:
I've seen that before - when I was building my own projector. It could be a bent ffc cable. You might want to crack it back open and verify they are all properly seated in their slots and nothing is pressing against them.
Hope that helps!
Click to expand...
Click to collapse
I re-opened the case. There does not appear to be anything bent or pressing up. Even the case loose, the screen is still like that. I've tried slightly pressing anything with cables attached and the picture does not flicker.
the link you posted goes nowhere. if nobody knows what you did, nobody can actually help you.
forum.xda-developers.com/showthread.php?t=1479664
looks like this is what I was looking for. compuw22c seems to be right on track below with what is going on.
Looks like a cracked screen if you look just right and down of that "cross hair" and would explain the semi working nature of the display. Maybe give us a close up photo of that "crack" to confirm? Maybe you flexed the screen just a bit too much
Sent from my Transformer Prime TF201 using Tapatalk 2
compuw22c said:
Looks like a cracked screen if you look just right and down of that "cross hair" and would explain the semi working nature of the display. Maybe give us a close up photo of that "crack" to confirm? Maybe you flexed the screen just a bit too much
Sent from my Transformer Prime TF201 using Tapatalk 2
Click to expand...
Click to collapse
This ...
The screen clearly has a crack at the bottom of the vertical stripe ...
Ribbon cable busted, or screen ribbon connector is busted (other than the crack).
leppie said:
Ribbon cable busted, or screen ribbon connector is busted (other than the crack).
Click to expand...
Click to collapse
Wow, that much damage? It appears as though there is a crack on the LCD not the glass, as I can not see the crack when the prime is off. Originally I used a plastic prying tool that I bought online for this purpose, but it broke within minutes. I then used a small screwdriver and pried the case enough to get a fingernail wedged in between, then I inserted a credit card and pried all around the unit. I didn't realize I have done that much damage (cracked LCD and potentially a broken ribbon). I guess my loss should serve as a warning to others.
To be honest, the only reason why I wanted to open the case was to get better wifi coverage. I use the unit a lot for note taking and for the brower when at work. My co-workers with other tablets are able to find wifi networks that I can't, and I was getting a bit frustrated by the Prime.
Now that mine is broken, I can honestly say, I won't be buying another Asus tablet to replace it. With the poor handling of the wifi (saying that it works enough), GPS (removal of the spec), and the few apps that crashed my prime (like World Series of Poker and Where's waldo to name a couple). It has honestly made me rethink the entire Android platform.
I may throw my chips into a Win 8 pro tablet after a few months of it's release, and I don't want an Ipad. I guess I'll be back to using my laptop for now.
Thanks All for the help.
At least someone who has bricked their unit but has a good screen might be interested in buying. Bad luck, but it does show how careful you need to be when opening devices.
Perhaps the LCD is not cracked, just looked again.
The construction of the Prime is quite poor. Did you by chance start opening it from the bottom and not the side? I recall a while back someone wrote about damaging their ribbon cable like that.
Really looks like a cracked LCD.
Cracked mine while trying to replace the glass at the bottom left and the entire screen went kaput, but here it's more centered and it works on the left side prior to what looks like a crack at the bottom. did you first insert the screwdriver right over the right dock mounting point?
I've seen people using putty knives (putty spreading tools used in construction) to open larger panels with success. they're thin and durable- perfect for the job.
Sad to see another prime go like that If only they had LCD's for sale..... I couldn't find one for mine